blocks|key|4356737|text|默认区域的默认配置文件可能有错误。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4356738|在~/.aws/config查看您的文件，您有如下所示|offset|length|style|CODE|4356739|[default]
region=us-east-1a
...|code-block|syntax|javascript|4356740|将该区域修复为region=us-east-1，然后命令将正确工作。|4356741|entityMap^0|0|1|D|0|0|7|G|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|R|8|@$D|S|E|T|F|G]]|9|@]|A|$]]|$1|H|3|I|5|J|7|U|8|@]|9|@]|A|$K|L]]|$1|M|3|N|5|6|7|V|8|@$D|W|E|X|F|G]]|9|@]|A|$]]|$1|O|3|-4|5|6|7|Y|8|@]|9|@]|A|$]]]|P|$]]

You probably have something wrong in your default profile for the default region.

Check your file at <code>~/.aws/config</code>, you have something like

<pre><code>[default]
region=us-east-1a
...
</code></pre>

Fix the region to <code>region=us-east-1</code> and then the command will work correctly

blocks|key|4356754|text|首先使用'aws配置‘，然后输入访问密钥、秘密密钥和区域。您输入的区域对于此问题非常重要。尝试输入类似“s3.us-east-1”之类的内容，而不是“s3.us-east-1a”。它将解决这个问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4356755|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

first you use 'aws configure'
then input the access key, and secret key, 
and the region. the region you input would be important for this problem.
try to input something like 's3.us-east-1', not 's3.us-east-1a'.
it will solve the issue.

blocks|key|4756408|text|有些AWS服务仅在与实际区域不匹配的特定区域中可用。如果是这种情况，可以通过将区域添加到实际的cli命令来覆盖标准设置。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4756409|对于不想更改配置文件中的默认区域的人来说，这可能是一个方便的解决方案。如果您的一般配置文件没有设置:请检查上述建议。|4756410|在这个例子中，该地区被迫在欧盟西部-1(例如爱尔兰)：|4756411|aws+s3+ls+--region=eu-west-1|code-block|syntax|javascript|4756412|经过测试并与aws+workmail一起使用以删除用户：|4756413|aws+workmail+delete-user+--region=eu-west-1+--organization-id+[org-id]+--user-id+[user-id]|4756414|我从这个帖子中得到了这个想法，它对我来说是完美的--所以我想分享它。希望能帮上忙！|4756415|entityMap^0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|T|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|U|8|@]|9|@]|A|$]]|$1|F|3|G|5|H|7|V|8|@]|9|@]|A|$I|J]]|$1|K|3|L|5|6|7|W|8|@]|9|@]|A|$]]|$1|M|3|N|5|H|7|X|8|@]|9|@]|A|$I|J]]|$1|O|3|P|5|6|7|Y|8|@]|9|@]|A|$]]|$1|Q|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|R|$]]

Some AWS services are just available in specific regions that do not match your actual region.
If this is the case you can override the standard setting by adding the region to your actual cli command.

This might be a handy solution for people that do not want to change their default region in the config file. IF your general config file is not set: Please check the suggestions above.

In this example the region is forced to eu-west-1 (e.g. Ireland):

<pre><code>aws s3 ls --region=eu-west-1
</code></pre>

Tested and used with aws workmail to delete users:

<pre><code>aws workmail delete-user --region=eu-west-1 --organization-id [org-id] --user-id [user-id]
</code></pre>

I derived the idea from this thread and it works perfect for me - so I wanted to share it. Hope it helps!

blocks|key|2670419|text|如果上述任何解决方案都不起作用，还请检查您的权限和防火墙设置。在我的例子中，添加代理环境变量完成了这项工作。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2670420|对于Linux或mac|2670421|$+export+HTTP_PROXY=http://<YOUR+PROXY+IP>:<PORT>|offset|length|style|CODE|2670422|$+export+HTTPS_PROXY=http://<YOUR+PROXY+IP>:<PORT>|2670423|Windows操作系统|2670424|set+HTTP_PROXY=http://<YOUR+PROXY+IP>:<PORT>|2670425|set+HTTPS_PROXY=http://<YOUR+PROXY+IP>:<PORT>|2670426|📷|atomic|2670427|​|2670428|2670429|2670430|2670431|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://developer.qcloudimg.com/http-save/yehe-900000/983d21d531c7904ba34428d715b6767c.png|imageAlt|1|https://developer.qcloudimg.com/http-save/yehe-900000/fc2ef984b7cf8b09018900651378a31a.png^0|0|0|0|1D|0|0|1E|0|0|0|18|0|0|19|0|0|1|0|0|0|0|0|1|1|0|0^^$0|@$1|2|3|4|5|6|7|1A|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|1B|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|1C|8|@$F|1D|G|1E|H|I]]|9|@]|A|$]]|$1|J|3|K|5|6|7|1F|8|@$F|1G|G|1H|H|I]]|9|@]|A|$]]|$1|L|3|M|5|6|7|1I|8|@]|9|@]|A|$]]|$1|N|3|O|5|6|7|1J|8|@$F|1K|G|1L|H|I]]|9|@]|A|$]]|$1|P|3|Q|5|6|7|1M|8|@$F|1N|G|1O|H|I]]|9|@]|A|$]]|$1|R|3|S|5|T|7|1P|8|@]|9|@$F|1Q|G|1R|1|1S]]|A|$]]|$1|U|3|V|5|6|7|1T|8|@]|9|@]|A|$]]|$1|W|3|V|5|6|7|1U|8|@]|9|@]|A|$]]|$1|X|3|S|5|T|7|1V|8|@]|9|@$F|1W|G|1X|1|1Y]]|A|$]]|$1|Y|3|V|5|6|7|1Z|8|@]|9|@]|A|$]]|$1|Z|3|-4|5|6|7|20|8|@]|9|@]|A|$]]]|10|$11|$5|12|13|14|A|$15|16|17|-4]]|18|$5|12|13|14|A|$15|19|17|-4]]]]

If none of solutions given above works,also check your permissions and firewall settings. In my case adding proxy environment variables did the job. 

For Linux or mac

<code>$ export HTTP_PROXY=http://&lt;YOUR PROXY IP&gt;:&lt;PORT&gt;</code>

<code>$ export HTTPS_PROXY=http://&lt;YOUR PROXY IP&gt;:&lt;PORT&gt;</code>

For Windows

<code>set HTTP_PROXY=http://&lt;YOUR PROXY IP&gt;:&lt;PORT&gt;</code>

<code>set HTTPS_PROXY=http://&lt;YOUR PROXY IP&gt;:&lt;PORT&gt;</code>
<a href="https://i.stack.imgur.com/1nBPo.png" rel="noreferrer"><img src="https://i.stack.imgur.com/1nBPo.png" alt="aws cli Windows"></a>

<a href="https://i.stack.imgur.com/ZCgEU.png" rel="noreferrer"><img src="https://i.stack.imgur.com/ZCgEU.png" alt="enter image description here"></a>

blocks|key|4756516|text|您应该在CLI脚本中指定区域，而不是依赖使用aws配置(当前最流行的答案断言)指定的默认区域。另一个答案暗示了这一点，但是如果通过AWS工具为Powershell使用CLI，那么语法是错误的。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4756517|此示例将区域强制到us+2(北加利福尼亚)，PowerShell语法：|4756518|aws+s3+ls+--region+us-west-2|code-block|syntax|javascript|4756519|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|L|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|M|8|@]|9|@]|A|$G|H]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

You should specify the region in your CLI script, rather than rely on default region specified using aws configure (as the current most popular answer asserts). Another answer alluded to that, but the syntax is wrong if you're using CLI via AWS Tools for Powershell.

This example forces region to us-west-2 (Northern California), PowerShell syntax:

<pre><code>aws s3 ls --region us-west-2
</code></pre>

blocks|key|2670497|text|可能，在配置aws时，默认区域出现了问题。在你的例子中，网址上写着"https://s3.us-east-1a.amazonaws.com/“|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|2670498|在你的命令提示符下|2670499|aws配置，输入您的密钥，现在修复您的区域从我们-东-1a到us-east-1.|style|BOLD|2670500|请根据您正在使用的CLI检查语法。这会有帮助的。|2670501|entityMap|0|LINK|mutability|MUTABLE|url|https://s3.us-east-1a.amazonaws.com/^0|Y|10|0|0|0|U|9|0|0^^$0|@$1|2|3|4|5|6|7|T|8|@]|9|@$A|U|B|V|1|W]]|C|$]]|$1|D|3|E|5|6|7|X|8|@]|9|@]|C|$]]|$1|F|3|G|5|6|7|Y|8|@$A|Z|B|10|H|I]]|9|@]|C|$]]|$1|J|3|K|5|6|7|11|8|@]|9|@]|C|$]]|$1|L|3|-4|5|6|7|12|8|@]|9|@]|C|$]]]|M|$N|$5|O|P|Q|C|$R|S]]]]

Probably, there is something wrong with the default region while configuring aws.
In your case, the URL says "<a href="https://s3.us-east-1a.amazonaws.com/" rel="noreferrer">https://s3.us-east-1a.amazonaws.com/</a>"

In your command prompt, 

aws configure,
enter your keys,
Now fix your region from us-east-1a to us-east-1.

Kindly check the syntax according to the CLI you are using.
This will be helpful.

blocks|key|2670545|text|假设您在~/aws/config中的配置文件使用的是区域(而不是原始问题中的AZ+)；另一个原因是您的客户无法连接到s3.us-east-1.amazonaws.com。在我的示例中，由于网络配置中的错误，我无法解析该DNS名称。解决DNS问题解决了我的问题。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2670546|entityMap^0|4|C|1M|Q|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|M|8|@]|D|@]|E|$]]]|G|$]]

Assuming that your profile in <code>~/aws/config</code> is using the region (instead of AZ as per your original question); the other cause is your client's inability to connect to <code>s3.us-east-1.amazonaws.com</code>. In my case, I was unable to resolve that DNS name due to an error in my network configuration. Fixing the DNS issue solved my problem.

blocks|key|4356988|text|您应该在CLI上执行以下操作:+1.+aws配置|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4356989|输入访问密钥3.输入密钥4.然后输入区域，即:+eu-west-1+(将a或b留在1之后)|ordered-list-item|4356990|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|G|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|H|8|@]|9|@]|A|$]]|$1|E|3|-4|5|6|7|I|8|@]|9|@]|A|$]]]|F|$]]

You should do the following on the CLI :
1. aws configure' 
2. input the access key
3. input secret key 
4. and then the region i.e : eu-west-1 (leave the a or b after the 1)

blocks|key|2670588|text|每个人都有不同的缺省值，有趣的是，随着时间的推移，情况会发生变化。举个例子，我首先在全球，然后在15分钟后，它显示俄亥俄州(这是us-east-2)。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2670589|最好的方法是在工作期间检查它--在您的AWS工作区的控制台中，只需将其设置在上--在您的名字旁边的右侧，在顶部栏上--检查您的区域名称，然后单击向下箭头查看您的区域。|BOLD|2670590|在AWS中，输入aws+configure或aws2+configure，给出您的访问权限和秘密id，然后在默认区域期间，编写区域并按Enter键。|2670591|您一定会访问特定的区域集，并且它会工作。|2670592|entityMap^0|1S|9|0|12|L|0|8|D|M|E|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@$9|P|A|Q|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|R|8|@$9|S|A|T|B|H]]|D|@]|E|$]]|$1|I|3|J|5|6|7|U|8|@$9|V|A|W|B|C]|$9|X|A|Y|B|C]]|D|@]|E|$]]|$1|K|3|L|5|6|7|Z|8|@]|D|@]|E|$]]|$1|M|3|-4|5|6|7|10|8|@]|D|@]|E|$]]]|N|$]]

Everyone has different defaults, and interestingly it will change after time. As an example, first I was on global, and then after 15 minutes it shows Ohio (which is <code>us-east-2</code>).

The best approach is to check it during your work -- in console of your AWS working area, just set it on the right above side near your name on top bar
 check your region name and click on the down arrow to see your region.

In AWS CLI type <code>aws configure</code> or <code>aws2 configure</code>, give your access and secret id, then during default region, write your region and press Enter.

You will definitely get access to specific region set and it will work.

blocks|key|2670609|text|解决我的问题的办法是跑：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2670610|++++sudo+aws+configure|code-block|syntax|javascript|2670611|输入凭据，然后运行：|2670612|++++sudo+aws+s3+ls|2670613|另一种解决方案是确保.+.aws/config文件中的区域与端点相同|2670614|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Q|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|R|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|S|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

The solution to my problem was to run:
<pre><code> sudo aws configure
</code></pre>
Enter your credentials and then run:
<pre><code> sudo aws s3 ls
</code></pre>
A different solution was to make sure that the region in the .aws/config file is the same as the endpoints

blocks|key|4756781|text|在Windows上，再次运行aws配置命令，并在没有字母的情况下重置区域，例如，如果您的区域是us-east-1a，则需要将其更改为us+1，这样它才能工作。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4756782|​|4756783|📷|atomic|offset|length|4756784|4756785|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://developer.qcloudimg.com/http-save/yehe-900000/cdf08cfc326af14a8e5edbb63ebbb494.png|imageAlt^0|0|0|0|1|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|T|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|U|8|@]|9|@$G|V|H|W|1|X]]|A|$]]|$1|I|3|C|5|6|7|Y|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|K|$L|$5|M|N|O|A|$P|Q|R|-4]]]]

On Windows run the aws configure command again and reset region without the letter for example if your region is us-east-1a you need to change it to us-east-1 in order for it to work.
<a href="https://i.stack.imgur.com/5lthq.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/5lthq.png" alt="enter image description here" /></a>

blocks|key|4756813|text|检查主目录下的.aws目录。Windows:+C:\Users.aws+Linux：~/..aws|type|ordered-list-item|depth|inlineStyleRanges|entityRanges|data|4756814|在此目录下，您将找到配置文件和凭据文件。它将获得您以前运行过的aws配置中的信息。如果没有，那么|4756815|运行aws+configure输入访问密钥-秘密密钥-输入秘密密钥区域-(ap-东南-1或美-东-1或任何其他区域)格式-+(json或留空，它将获取默认值，您只需点击enter)。|offset|length|style|CODE|4756816|在步骤2中，您应该看到配置文件，打开它，它应该有区域。请确保有指定的区域。|4756817|现在您可以运行下面的命令来列出存储桶aws+s3+ls，它应该可以正常工作。|4756818|unstyled|entityMap^0|0|0|2|D|0|0|I|9|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|R|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|S|8|@$F|T|G|U|H|I]]|9|@]|A|$]]|$1|J|3|K|5|6|7|V|8|@]|9|@]|A|$]]|$1|L|3|M|5|6|7|W|8|@$F|X|G|Y|H|I]]|9|@]|A|$]]|$1|N|3|-4|5|O|7|Z|8|@]|9|@]|A|$]]]|P|$]]

<ol>
<li>Check the .aws directory under home directory.
Windows:
C:\Users&lt;home-name&gt;.aws
Linux:
~/.aws
</li>
<li>Under this directory, you will find the config as well as credentials file. It will have the information from the aws configure that you may have run before. IF not, then
</li>
<li>Run <code>aws configure</code>
Enter the access key - 
secret key - enter secret key
region - (ap-southeast-1 or us-east-1 or any other regions)
format - (json or leave it blank, it will pick up default values you may simply hit enter)
</li>
<li>From the Step 2, you should see the config file, open it, it should have the region. Please ensure there is region specified.
</li>
<li>You may now run the following command to list the buckets
<code>aws s3 ls</code>
It should work fine.
</li>
</ol>

blocks|key|4357233|text|如果它在您的默认区域中不起作用，请尝试提供一个接近您的区域。这对我起了作用：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4357234|+++PS+C:\Users\shrig>+aws++configure
+++AWS+Access+Key+ID+[****************C]:**strong+text**
+++AWS+Secret+Access+Key+[****************WD]:
+++Default+region+name+[us-east1]:+ap-south-1
+++Default+output+format+[text]:|code-block|syntax|javascript|4357235|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

In case it is not working in your default region, try providing a region close to you. This worked for me:
<pre><code> PS C:\Users\shrig&gt; aws configure
 AWS Access Key ID [****************C]:**strong text**
 AWS Secret Access Key [****************WD]:
 Default region name [us-east1]: ap-south-1
 Default output format [text]:
</code></pre>

blocks|key|4357295|text|这对我有用。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4357296|使用debug选项清楚地了解错误|ordered-list-item|4357297|aws+ec2描述-实例-实例-id+(myid)+-区域ap-南-1-调试|offset|length|style|BOLD|4357298|我有个问题。|4357299|无法连接到端点URL："https://ec2.ap-south-1b.amazonaws.com/"：EndpointConnectionError：|blockquote|4357300|我试着要平，但不起作用。|4357301|ping+ec2.ap-south-1b.amazonaws.com+ping:+名称或服务未知|4357302|在使用aws配置时，我检查了区域的无效值。|4357303|但它的配置是正确的|4357304|默认区域=+ap-south-1|4357305|然后，我转到**IAM+->用户->+(yourusername)+->添加权限|4357306|我添加了"AdministratorAccess“策略**。|4357307|在那之后，一切都对我有利。|4357308|MainThread+-urllib3连接池-调试-启动新的HTTPS连接(1)：ec2.ap-south-1.amazonaws.com:443+MainThread+-+urllib3.connectionpool+-调试-+https://ec2.ap-south-1.amazonaws.com:443+"POST+/+HTTP/1.1“2007176|4357309|entityMap|0|LINK|mutability|MUTABLE|url|https://ec2.ap-south-1b.amazonaws.com/|1|https://ec2.ap-south-1.amazonaws.com/^0|0|0|0|12|0|0|B|14|1G|O|C|12|0|0|0|C|0|0|14|0|0|0|0|G|0|0|0|0|0|36|4C|O|37|14|1|0^^$0|@$1|2|3|4|5|6|7|1H|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|1I|8|@]|9|@]|A|$]]|$1|E|3|F|5|6|7|1J|8|@$G|1K|H|1L|I|J]]|9|@]|A|$]]|$1|K|3|L|5|6|7|1M|8|@]|9|@]|A|$]]|$1|M|3|N|5|O|7|1N|8|@$G|1O|H|1P|I|J]|$G|1Q|H|1R|I|J]]|9|@$G|1S|H|1T|1|1U]]|A|$]]|$1|P|3|Q|5|D|7|1V|8|@$G|1W|H|1X|I|J]]|9|@]|A|$]]|$1|R|3|S|5|O|7|1Y|8|@$G|1Z|H|20|I|J]]|9|@]|A|$]]|$1|T|3|U|5|D|7|21|8|@]|9|@]|A|$]]|$1|V|3|W|5|6|7|22|8|@]|9|@]|A|$]]|$1|X|3|Y|5|O|7|23|8|@$G|24|H|25|I|J]]|9|@]|A|$]]|$1|Z|3|10|5|D|7|26|8|@]|9|@]|A|$]]|$1|11|3|12|5|6|7|27|8|@]|9|@]|A|$]]|$1|13|3|14|5|D|7|28|8|@]|9|@]|A|$]]|$1|15|3|16|5|O|7|29|8|@$G|2A|H|2B|I|J]|$G|2C|H|2D|I|J]]|9|@$G|2E|H|2F|1|2G]]|A|$]]|$1|17|3|-4|5|6|7|2H|8|@]|9|@]|A|$]]]|18|$19|$5|1A|1B|1C|A|$1D|1E]]|1F|$5|1A|1B|1C|A|$1D|1G]]]]

This worked for me.
<ol>
<li>Use debug option to get clear idea of bug</li>
</ol>
aws ec2 describe-instances --instance-ids (myid) --region ap-south-1 --debug
I got following issue.
<blockquote>
EndpointConnectionError: Could not connect to the endpoint URL:
&quot;https://ec2.ap-south-1b.amazonaws.com/&quot;
</blockquote>
<ol start="2">
<li>I tried to Ping but it was not working</li>
</ol>
<blockquote>
ping ec2.ap-south-1b.amazonaws.com ping:
ec2.ap-south-1b.amazonaws.com: Name or service not known
</blockquote>
<ol start="3">
<li>I checked for invalid value for Region when using aws configure</li>
</ol>
but it was configured properly
<blockquote>
[default] region = ap-south-1
</blockquote>
<ol start="4">
<li>Then , I went to **IAM -&gt; Users - &gt; (yourusername) - &gt; Add
Permissions</li>
</ol>
and I added &quot;AdministratorAccess&quot; Policy**.
<ol start="5">
<li>After that everything worked for me.</li>
</ol>
<blockquote>
MainThread - urllib3.connectionpool - DEBUG - Starting new HTTPS
connection (1): ec2.ap-south-1.amazonaws.com:443 MainThread -
urllib3.connectionpool - DEBUG -
<a href="https://ec2.ap-south-1.amazonaws.com:443" rel="nofollow noreferrer">https://ec2.ap-south-1.amazonaws.com:443</a> &quot;POST / HTTP/1.1&quot; 200 7176
</blockquote>

blocks|key|4756912|text|奇怪的是，在我的情况下，重新启动我的笔记本电脑是有帮助的。我最近一直在使用VPN，我认为它把导致这个错误的一些网络设置搞砸了。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4756913|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Weirdly, in my case restarting my laptop has helped. I've been using VPN lately, I think it messed up some network settings causing this error.

blocks|key|4756938|text|检查您的环境设置：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4756939|set+%7C&+grep+REGION|offset|length|style|CODE|4756940|我在AWS_REGION和AWS_DEFAULT_REGION环境变量中输入了一个错误，所以它试图访问一个不存在的区域。|4756941|entityMap^0|0|0|I|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|M|8|@$D|N|E|O|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|P|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|K|$]]

Check your environment settings:
<code>set |&amp; grep REGION</code>
I had a typo in my AWS_REGION and AWS_DEFAULT_REGION environment variables, so it was trying to access a non-existant region.

<pre><code>$ aws s3 ls

Could not connect to the endpoint URL: "https://s3.us-east-1a.amazonaws.com/"
</code></pre>

What could be the problem?

AWS S3 CLI - Could not connect to the endpoint URL

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋 

腾讯云代码助手

CODING DevOps

Cloud Studio

SDK中心

API中心

命令行工具

$ aws s3 lsCould not connect to the endpoint URL: "https://s3.us-east-1a.amazonaws.com/"有什么问题吗？

问AWS S3 CLI -无法连接到端点URL
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问AWS S3 CLI -无法连接到端点URLEN