在KSTAR微型电源600 on上启用NUT
在KSTAR微型电源600 on上启用NUT
提问于 2021-08-21 16:58:22
我有一个KSTARMicroPower600VA (USB为MEC0003)，安装了NUT，完成了以下配置：
禁用KSTAR Powercom 600 of的beep (USB为禁0003)
但执政官并没有开始：
服务螺母服务器状态
nut-server.service - Network UPS Tools - power devices information server
Loaded: loaded (/lib/systemd/system/nut-server.service; enabled; vendor preset: enabled)
Active: inactive (dead) since Sat 2021-08-21 00:26:32 CEST; 3s ago
Process: 3540 ExecStart=/sbin/upsd (code=exited, status=0/SUCCESS)
Aug 21 00:26:32 moon-ThinkPad-X1-Carbon systemd[1]: Starting Network UPS Tools - power devices information server...
Aug 21 00:26:32 moon-ThinkPad-X1-Carbon upsd[3540]: upsd disabled, please adjust the configuration to your needs
Aug 21 00:26:32 moon-ThinkPad-X1-Carbon upsd[3540]: Then set MODE to a suitable value in /etc/nut/nut.conf to enable it
Aug 21 00:26:32 moon-ThinkPad-X1-Carbon systemd[1]: Started Network UPS Tools - power devices information server.
ups.conf:
maxretry = 5
MODE=none
[kstar]
driver = nutdrv_qx
port = auto
desc = "Description of this UPS"好像我错过了一些配置，有人能帮忙吗？谢谢你，桑多
回答 1
Ask Ubuntu用户
发布于 2022-01-15 07:05:33
首先，它似乎没有正确地设置模式。从编辑nut.conf开始如下：
$ sudo nano /etc/nut/nut.conf将模式设置为独立模式：
MODE=standalone同时，从您的MODE=none中删除行ups.conf！
当你做完这件事后，你可以再试一次启动螺母：
$ sudo upsdrvctl start和
$ sudo systemctl start nut-server最后，检查以确保一切正常工作：
$ sudo systemctl status nut-server你应该看到以下情况：
● nut-server.service - Network UPS Tools - power devices information server
Loaded: loaded (/lib/systemd/system/nut-server.service; enabled; vendor preset: enabled)
Active: active (running) since Sat 2022-01-15 07:49:02 CET; 10min ago
Process: 136052 ExecStart=/sbin/upsd (code=exited, status=0/SUCCESS)
Main PID: 136064 (upsd)
Tasks: 1 (limit: 18903)
Memory: 1020.0K
CGroup: /system.slice/nut-server.service
└─136064 /lib/nut/upsd
Jan 15 07:49:02 server systemd[1]: Starting Network UPS Tools - power devices information server...
Jan 15 07:49:02 server upsd[136052]: fopen /run/nut/upsd.pid: No such file or directory
Jan 15 07:49:02 server upsd[136052]: listening on 127.0.0.1 port 3493
Jan 15 07:49:02 server upsd[136052]: listening on 127.0.0.1 port 3493
Jan 15 07:49:02 server upsd[136052]: listening on ::1 port 3493
Jan 15 07:49:02 server upsd[136052]: listening on ::1 port 3493
Jan 15 07:49:02 server upsd[136052]: Connected to UPS [kstar]: nutdrv_qx-kstar
Jan 15 07:49:02 server upsd[136052]: Connected to UPS [kstar]: nutdrv_qx-kstar
Jan 15 07:49:02 server upsd[136064]: Startup successful
Jan 15 07:49:02 server systemd[1]: Started Network UPS Tools - power devices information server.如果这没有帮助，请张贴配置文件的全部内容：/etc/nut/ups.conf和/etc/nut/nut.conf。
页面原文内容由Ask Ubuntu提供。腾讯云小微IT领域专用引擎提供翻译支持
原文链接：
https://askubuntu.com/questions/1359332
复制相关文章
相似问题
腾讯云开发者
