USB摄像头(罗技)停止工作直到重新连接
USB摄像头(罗技)停止工作直到重新连接
提问于 2021-11-30 18:21:47
我有戴尔桌面电脑与Ubuntu18.04和罗技布里欧相机。它在Ubuntu16.04上运行得很好，在升级到18.04之后的几周内运行良好，拍摄了数百张照片。然后从一两周前开始，它会得到一些镜头，有时是30，有时50，然后停止工作，直到它被断开和重新连接。我有另一个戴尔桌面，也有Ubuntu18.04和同样的相机，但那一个没有互联网连接，没有得到更新。那个继续正常工作。我换了相机，但问题还是在这台电脑上。
我重新连接摄像机并运行这个脚本进行测试，使用fswebcam获取照片并保存为jpg：
#!/bin/bash
for index in {0..100}
do
echo shot $index
echo Time: `date +"%Y-%m-%d %T"`
fswebcam -d v4l2:/dev/video0 -r 4096x2160 --jpeg -1 --no-banner -S 9 --verbose temp/shot.jpg
sleep 1
done
exit它工作了20到50次，然后fsweb摄像头说“找不到兼容的调色板格式。”这是连续两次的输出，最后一次有效，第一次失败：
shot 62
Time: 2021-11-30 11:26:17
--- Opening v4l2:/dev/video0...
>>> Using 'v4l2' source module.
/dev/video0 opened.
src_v4l2_get_capability,87: /dev/video0 information:
src_v4l2_get_capability,88: cap.driver: "uvcvideo"
src_v4l2_get_capability,89: cap.card: "Logitech BRIO"
src_v4l2_get_capability,90: cap.bus_info: "usb-0000:00:14.0-8"
src_v4l2_get_capability,91: cap.capabilities=0x84200001
src_v4l2_get_capability,92: - VIDEO_CAPTURE
src_v4l2_get_capability,103: - STREAMING
No input was specified, using the first.
src_v4l2_set_input,181: /dev/video0: Input 0 information:
src_v4l2_set_input,182: name = "Camera 1"
src_v4l2_set_input,183: type = 00000002
src_v4l2_set_input,185: - CAMERA
src_v4l2_set_input,186: audioset = 00000000
src_v4l2_set_input,187: tuner = 00000000
src_v4l2_set_input,188: status = 00000000
src_v4l2_set_pix_format,520: Device offers the following V4L2 pixel formats:
src_v4l2_set_pix_format,533: 0: [0x56595559] 'YUYV' (YUYV 4:2:2)
src_v4l2_set_pix_format,533: 1: [0x47504A4D] 'MJPG' (Motion-JPEG)
src_v4l2_set_pix_format,533: 2: [0x3231564E] 'NV12' (Y/CbCr 4:2:0)
Using palette MJPEG
src_v4l2_set_mmap,672: mmap information:
src_v4l2_set_mmap,673: frames=4
src_v4l2_set_mmap,722: 0 length=17694720
src_v4l2_set_mmap,722: 1 length=17694720
src_v4l2_set_mmap,722: 2 length=17694720
src_v4l2_set_mmap,722: 3 length=17694720
--- Capturing frame...
Skipping 9 frames...
Capturing 1 frames...
Captured 10 frames in 0.31 seconds. (32 fps)
--- Processing captured image...
Setting output format to JPEG, quality -1
Disabling banner.
Writing JPEG image to 'temp/shot.jpg'.
shot 63
Time: 2021-11-30 11:26:29
--- Opening v4l2:/dev/video0...
>>> Using 'v4l2' source module.
/dev/video0 opened.
src_v4l2_get_capability,87: /dev/video0 information:
src_v4l2_get_capability,88: cap.driver: "uvcvideo"
src_v4l2_get_capability,89: cap.card: "Logitech BRIO"
src_v4l2_get_capability,90: cap.bus_info: "usb-0000:00:14.0-8"
src_v4l2_get_capability,91: cap.capabilities=0x84200001
src_v4l2_get_capability,92: - VIDEO_CAPTURE
src_v4l2_get_capability,103: - STREAMING
No input was specified, using the first.
src_v4l2_set_input,181: /dev/video0: Input 0 information:
src_v4l2_set_input,182: name = "Camera 1"
src_v4l2_set_input,183: type = 00000002
src_v4l2_set_input,185: - CAMERA
src_v4l2_set_input,186: audioset = 00000000
src_v4l2_set_input,187: tuner = 00000000
src_v4l2_set_input,188: status = 00000000
src_v4l2_set_pix_format,520: Device offers the following V4L2 pixel formats:
src_v4l2_set_pix_format,533: 0: [0x56595559] 'YUYV' (YUYV 4:2:2)
src_v4l2_set_pix_format,533: 1: [0x47504A4D] 'MJPG' (Motion-JPEG)
src_v4l2_set_pix_format,533: 2: [0x3231564E] 'NV12' (Y/CbCr 4:2:0)
Unable to find a compatible palette format.dmesg -T显示了这一点，从相机重新连接时开始：
[Tue Nov 30 11:18:03 2021] usb 2-8: USB disconnect, device number 7
[Tue Nov 30 11:18:10 2021] usb 2-8: new SuperSpeed USB device number 8 using xhci_hcd
[Tue Nov 30 11:18:10 2021] usb 2-8: New USB device found, idVendor=046d, idProduct=085e
[Tue Nov 30 11:18:10 2021] usb 2-8: New USB device strings: Mfr=0, Product=2,
SerialNumber=3
[Tue Nov 30 11:18:10 2021] usb 2-8: Product: Logitech BRIO
[Tue Nov 30 11:18:10 2021] usb 2-8: SerialNumber: 93004248
[Tue Nov 30 11:18:10 2021] uvcvideo: Found UVC 1.00 device Logitech BRIO (046d:085e)
[Tue Nov 30 11:18:10 2021] input: Logitech BRIO as
/devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input20
[Tue Nov 30 11:18:10 2021] usb 2-8: current rate 16000 is different from the runtime rate 24000
[Tue Nov 30 11:18:10 2021] usb 2-8: current rate 16000 is different from the runtime rate 32000
[Tue Nov 30 11:18:10 2021] usb 2-8: current rate 16000 is different from the runtime rate 48000
[Tue Nov 30 11:18:10 2021] input: Logitech BRIO as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.4/0003:046D:085E.0006/input/input21
[Tue Nov 30 11:18:10 2021] hid-generic 0003:046D:085E.0006: input,hidraw0: USB HID v1.11 Device [Logitech BRIO] on usb-0000:00:14.0-8/input4
[Tue Nov 30 11:18:10 2021] usb 2-8: current rate 16000 is different from the runtime rate 48000
[Tue Nov 30 11:18:10 2021] usb 2-8: current rate 16000 is different from the runtime rate 48000
[Tue Nov 30 11:18:10 2021] usb 2-8: current rate 16000 is different from the runtime rate 48000
[Tue Nov 30 11:26:21 2021] usb 2-8: Set SEL for device-initiated U1 failed.
[Tue Nov 30 11:26:21 2021] usb 2-8: Set SEL for device-initiated U2 failed.
[Tue Nov 30 11:26:27 2021] usb 2-8: Set SEL for device-initiated U1 failed.
[Tue Nov 30 11:26:27 2021] usb 2-8: Set SEL for device-initiated U2 failed.
[Tue Nov 30 11:26:28 2021] uvcvideo: Failed to set UVC probe control : -32 (exp. 26).
[Tue Nov 30 11:26:28 2021] uvcvideo: Failed to set UVC probe control : -32 (exp. 26).
[Tue Nov 30 11:26:28 2021] uvcvideo: Failed to set UVC probe control : -32 (exp. 26).
[Tue Nov 30 11:26:28 2021] uvcvideo: Failed to set UVC probe control : -32 (exp. 26).
[Tue Nov 30 11:26:28 2021] uvcvideo: Failed to set UVC probe control : -32 (exp. 26).
[Tue Nov 30 11:26:28 2021] uvcvideo: Failed to set UVC probe control : -32 (exp. 26).最后一件事被重复了很多次。
我已经尝试过很多次了，它总是以同样的方式失败，从“USB2-8:为设备启动的U1设置SEL失败”开始。
我怎样才能找到并解决这个问题？
回答 1
Ask Ubuntu用户
发布于 2022-01-05 12:18:48
正如评论所指出的，我在Windows 10上也有类似的问题。我最近在日志中注意到，我使用的是带有2.0 USB端口的网络摄像头(这是计算机上唯一可用的)。我换了3.2个USB接口，一个多小时后没有断开连接.我在几个地方(就像这里)上读到，网络摄像头只能在默认/罗技电缆或完全兼容的4K中正常工作，这至少需要USB3 480 USB3。因此，将其插入USB2确实是有问题的。当您使用-r 4096x2160时，您的问题可能是相同的吗？
页面原文内容由Ask Ubuntu提供。腾讯云小微IT领域专用引擎提供翻译支持
原文链接：
https://askubuntu.com/questions/1378449
复制相关文章
相似问题
腾讯云开发者
