前往小程序,Get更优阅读体验!
立即前往
首页
学习
活动
专区
工具
TVP
发布
社区首页 >专栏 >Sentinel Slot扩展实践-流控熔断预警实现

Sentinel Slot扩展实践-流控熔断预警实现

作者头像
猿天地
发布2020-03-11 10:00:58
1.4K0
发布2020-03-11 10:00:58
举报
文章被收录于专栏:猿天地猿天地

前言

前几天公司生产环境一个服务由于流量上升触发了 Sentinel 的流控机制,然后用户反馈访问慢,定位发现是 task 定时任务导致,后面 task 优化之后发布,流量恢复正常。

这是一个再正常不过的生产问题,可能大部分同学都经历过,经历过的大多数是解决问题之后就不了了之,导致事故还有再次发生的可能,最终对用户造成了不好的体验。所以我觉得所有的生产问题都需要进行复盘,当然复盘的目的不是为了追责,而是防止下次再发生同样的错误。那我们就简单分析一下这个问题,首先肯定是业务层面的疏漏导致 task 发出不合理的大量请求,其二我们的流控只是简单粗暴的流控,没有更好的预警措施,导致影响到用户之后我们才知晓(即流控或熔断已经触发)。

那我们的解决方案呢?首先肯定是业务层面的预防,但这不是本文要说的重点,这里不展开讨论了。其次就是预警,就是我们能否在快要触发流控之前知晓,然后报警到相关负责人提前介入处理,防止触发流控熔断。当然也不能完全避免,但是总比流控或熔断触发之后在报警要好得多。

由于之前流控用的阿里的 Sentinel,所以本文介绍的具体实现是用 Sentinel 的自定义 slot 功能,这个自定义 slot 卡槽在 Sentinel 官方文档里面就一句话带过,然后加上一个 demo 代码,我在使用的过程中也遇到过不少坑,所以分享一下结果给大家。

如果大家对 Sentinel 不是很了解,可以先去 github 先了解简单试用一下在阅读本文。github 地址:https://github.com/alibaba/Sentinel[1]

如果想熟悉自定义 slot 功能建议了解一下 Sentinel 的工作原理:https://github.com/alibaba/Sentinel/wiki/Sentinel%E5%B7%A5%E4%BD%9C%E4%B8%BB%E6%B5%81%E7%A8%8B[2]

还有源码中的 demo 对于自定义 slot 的写法:https://github.com/alibaba/Sentinel/tree/master/sentinel-demo/sentinel-demo-slot-chain-spi[3]

具体实现

下面介绍下 Sentinel 预警功能的相关实现,使用的前提是你的系统已经在用 Sentinel 的流控或熔断等功能。

  1. 自定义 CustomSlotChainBuilder 实现 SlotChainBuilder 接口,这里主要是把我们自定义的 Slot 加到 SlotChain 这个链中
代码语言:javascript
复制
import com.alibaba.csp.sentinel.slotchain.ProcessorSlotChain;
import com.alibaba.csp.sentinel.slotchain.SlotChainBuilder;
import com.alibaba.csp.sentinel.slots.DefaultSlotChainBuilder;
import com.qiaofang.tortoise.gateway.component.ApplicationContextUtil;
import com.qiaofang.tortoise.gateway.config.SentinelProperties;
import org.springframework.stereotype.Component;

import javax.annotation.Resource;

/**
 * 自定义slot
 *
 * @author chenhao
 */
public class CustomSlotChainBuilder implements SlotChainBuilder {
    @Override
    public ProcessorSlotChain build() {
        ProcessorSlotChain chain = new DefaultSlotChainBuilder().build();
        SentinelProperties sentinelProperties = (SentinelProperties) ApplicationContextUtil.getContext().getBean("sentinelProperties");
        chain.addLast(new FlowEarlyWarningSlot(sentinelProperties));
        chain.addLast(new DegradeEarlyWarningSlot(sentinelProperties));
        return chain;
    }
}

2.自定义 FlowEarlyWarningSlot、DegradeEarlyWarningSlot 流控熔断 2 个预警 slot

自定义 FlowEarlyWarningSlot

代码语言:javascript
复制
import com.alibaba.csp.sentinel.context.Context;
import com.alibaba.csp.sentinel.node.DefaultNode;
import com.alibaba.csp.sentinel.slotchain.AbstractLinkedProcessorSlot;
import com.alibaba.csp.sentinel.slotchain.ResourceWrapper;
import com.alibaba.csp.sentinel.slots.block.flow.FlowRule;
import com.alibaba.csp.sentinel.slots.block.flow.FlowRuleChecker;
import com.alibaba.csp.sentinel.slots.block.flow.FlowRuleManager;
import com.alibaba.csp.sentinel.slots.block.flow.FlowRuleUtil;
import com.alibaba.csp.sentinel.util.AssertUtil;
import com.google.common.collect.Lists;
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;
import org.springframework.beans.BeanUtils;
import org.springframework.util.CollectionUtils;

import java.util.List;
import java.util.Map;
import java.util.stream.Collectors;

/**
 * 流控预警slot
 *
 * @author chenhao
 */
public class FlowEarlyWarningSlot2 extends AbstractLinkedProcessorSlot<DefaultNode> {

    /**
     * log
     */
    private Logger logger = LoggerFactory.getLogger(this.getClass());

    private final FlowRuleChecker checker;

    public FlowEarlyWarningSlot2() {
        this(new FlowRuleChecker());
    }

    /**
     * Package-private for test.
     *
     * @param checker flow rule checker
     * @since 1.6.1
     */
    FlowEarlyWarningSlot2(FlowRuleChecker checker) {
        AssertUtil.notNull(checker, "flow checker should not be null");
        this.checker = checker;
    }


    private List<FlowRule> getRuleProvider(String resource) {
        // Flow rule map should not be null.
        List<FlowRule> rules = FlowRuleManager.getRules();
        List<FlowRule> earlyWarningRuleList = Lists.newArrayList();
        for (FlowRule rule : rules) {
            FlowRule earlyWarningRule = new FlowRule();
            BeanUtils.copyProperties(rule, earlyWarningRule);
            /**
             * 这里是相当于把规则阈值改成原来的80%,达到提前预警的效果,
             * 这里建议把0.8做成配置
             */
            earlyWarningRule.setCount(rule.getCount() * 0.8);
            earlyWarningRuleList.add(earlyWarningRule);
        }
        Map<String, List<FlowRule>> flowRules = FlowRuleUtil.buildFlowRuleMap(earlyWarningRuleList);
        return flowRules.get(resource);
    }

    /**
     * get origin rule
     *
     * @param resource
     * @return
     */
    private FlowRule getOriginRule(String resource) {
        List<FlowRule> originRule = FlowRuleManager.getRules().stream().filter(flowRule -> flowRule.getResource().equals(resource)).collect(Collectors.toList());
        if (CollectionUtils.isEmpty(originRule)) {
            return null;
        }
        return originRule.get(0);
    }

    @Override
    public void entry(Context context, ResourceWrapper resourceWrapper, DefaultNode node, int count, boolean prioritized, Object... args)
            throws Throwable {
        String resource = context.getCurEntry().getResourceWrapper().getName();
        List<FlowRule> rules = getRuleProvider(resource);
        if (rules != null) {
            for (FlowRule rule : rules) {
                //这里取到的规则都是配置阈值的80%,这里如果检查到阈值了,说明就是到了真实阈值的80%,既可以发报警给对应负责人了
                if (!checker.canPassCheck(rule, context, node, count, prioritized)) {
                    FlowRule originRule = getOriginRule(resource);
                    String originRuleCount = originRule == null ? "未知" : String.valueOf(originRule.getCount());
                    logger.info("FlowEarlyWarning:服务{}目前的流量指标已经超过{},接近配置的流控阈值:{},", resource, rule.getCount(), originRuleCount);
                    //TODO 报警功能自行实现
                    break;
                }
            }
        }
        fireEntry(context, resourceWrapper, node, count, prioritized, args);
    }

    @Override
    public void exit(Context context, ResourceWrapper resourceWrapper, int count, Object... args) {
        fireExit(context, resourceWrapper, count, args);
    }
}

DegradeEarlyWarningSlot

代码语言:javascript
复制
import com.alibaba.csp.sentinel.context.Context;
import com.alibaba.csp.sentinel.node.DefaultNode;
import com.alibaba.csp.sentinel.slotchain.AbstractLinkedProcessorSlot;
import com.alibaba.csp.sentinel.slotchain.ResourceWrapper;
import com.alibaba.csp.sentinel.slots.block.degrade.DegradeRule;
import com.alibaba.csp.sentinel.slots.block.degrade.DegradeRuleManager;
import com.alibaba.csp.sentinel.util.AssertUtil;
import com.google.common.collect.Lists;
import com.qiaofang.tortoise.gateway.config.SentinelProperties;
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;
import org.springframework.beans.BeanUtils;
import org.springframework.util.CollectionUtils;

import java.util.List;
import java.util.stream.Collectors;

/**
 * 熔断预警slot
 *
 * @author chenhao
 */
public class DegradeEarlyWarningSlot2 extends AbstractLinkedProcessorSlot<DefaultNode> {

    /**
     * log
     */
    private Logger logger = LoggerFactory.getLogger(this.getClass());

    /**
     * 与流控基本一致 就是取原规则的方式不一样
     * @param resource
     * @return
     */
    private List<DegradeRule> getRuleProvider(String resource) {
        // Flow rule map should not be null.
        List<DegradeRule> rules = DegradeRuleManager.getRules();
        List<DegradeRule> earlyWarningRuleList = Lists.newArrayList();
        for (DegradeRule rule : rules) {
            DegradeRule earlyWarningRule = new DegradeRule();
            BeanUtils.copyProperties(rule, earlyWarningRule);
            earlyWarningRule.setCount(rule.getCount() * 0.8);
            earlyWarningRuleList.add(earlyWarningRule);
        }
        return earlyWarningRuleList.stream().filter(rule -> resource.equals(rule.getResource())).collect(Collectors.toList());
    }

    /**
     * get origin rule
     *
     * @param resource
     * @return
     */
    private DegradeRule getOriginRule(String resource) {
        List<DegradeRule> originRule = DegradeRuleManager.getRules().stream().filter(rule -> rule.getResource().equals(resource)).collect(Collectors.toList());
        if (CollectionUtils.isEmpty(originRule)) {
            return null;
        }
        return originRule.get(0);
    }

    @Override
    public void entry(Context context, ResourceWrapper resourceWrapper, DefaultNode node, int count, boolean prioritized, Object... args)
            throws Throwable {
        String resource = context.getCurEntry().getResourceWrapper().getName();
        List<DegradeRule> rules = getRuleProvider(resource);
        if (rules != null) {
            for (DegradeRule rule : rules) {
                if (!rule.passCheck(context, node, count)) {
                    DegradeRule originRule = getOriginRule(resource);
                    String originRuleCount = originRule == null ? "未知" : String.valueOf(originRule.getCount());
                    logger.info("DegradeEarlyWarning:服务{}目前的熔断指标已经超过{},接近配置的熔断阈值:{},", resource, rule.getCount(), originRuleCount);
                    break;
                }
            }
        }
        fireEntry(context, resourceWrapper, node, count, prioritized, args);
    }

    @Override
    public void exit(Context context, ResourceWrapper resourceWrapper, int count, Object... args) {
        fireExit(context, resourceWrapper, count, args);
    }
}

3.在 resources 文件夹下面新增 META-INF.services 文件夹,新增文件 com.alibaba.csp.sentinel.slotchain.SlotChainBuilder(文件名无所谓) 内容如下

代码语言:javascript
复制
# 这里写你CustomSlotChainBuilder的完整包路径
com.xxx.sentinel.CustomSlotChainBuilder

到这里基本上就可以了,用的过程中还是遇到挺多坑的,简单列举几个吧

  • 直接改 FlowRule 的 count 属性是不行的,因为底层验证规则的时候用的是 FlowRule 的 controller 属性,这个属性又是私有的,所以直接先拿到原始的配置后通过 FlowRuleUtil 重新生成
  • 调试过程中,DefaultNode 里面很多方法的值是都是 1s 内有效,从方法 A debug 到方法 B 可能值就没了,当时一脸懵逼

写在最后

本人很少写这种技术博客,所以有什么问题,或者不严谨的地方,大家可以提出来,求轻点喷我哈哈哈

参考资料

[1]

https://github.com/alibaba/Sentinel: https://github.com/alibaba/Sentinel

[2]

https://github.com/alibaba/Sentinel/wiki/Sentinel%E5%B7%A5%E4%BD%9C%E4%B8%BB%E6%B5%81%E7%A8%8B: https://github.com/alibaba/Sentinel/wiki/Sentinel%E5%B7%A5%E4%BD%9C%E4%B8%BB%E6%B5%81%E7%A8%8B

[3]

https://github.com/alibaba/Sentinel/tree/master/sentinel-demo/sentinel-demo-slot-chain-spi: https://github.com/alibaba/Sentinel/tree/master/sentinel-demo/sentinel-demo-slot-chain-spi

PS:本文是我的一个朋友写的,大家有好的文章欢迎投稿

本文参与 腾讯云自媒体分享计划,分享自微信公众号。
原始发表:2020-03-06,如有侵权请联系 cloudcommunity@tencent.com 删除

本文分享自 猿天地 微信公众号,前往查看

如有侵权,请联系 cloudcommunity@tencent.com 删除。

本文参与 腾讯云自媒体分享计划  ,欢迎热爱写作的你一起参与!

评论
登录后参与评论
0 条评论
热度
最新
推荐阅读
目录
  • 前言
  • 具体实现
  • 写在最后
    • 参考资料
    领券
    问题归档专栏文章快讯文章归档关键词归档开发者手册归档开发者手册 Section 归档