企业实战（18）两步搞定轻量级开源堡垒机Teleport服务的数据备份与升级（3）

[root@localhost ~]# mkdir teleport

[root@localhost ~]# cd teleport

[root@localhost teleport]# wget https://tp4a.com/static/download/teleport-server-linux-x64-3.2.2.tar.gz  //下载Teleport服务端安装包
--2020-08-25 20:26:43--  https://tp4a.com/static/download/teleport-server-linux-x64-3.2.2.tar.gz
正在解析主机 tp4a.com (tp4a.com)... 39.97.125.170
正在连接 tp4a.com (tp4a.com)|39.97.125.170|:443... 已连接。
已发出 HTTP 请求，正在等待回应... 200 OK
长度：23137304 (22M) [application/octet-stream]
正在保存至: “teleport-server-linux-x64-3.2.2.tar.gz”

100%[============================================================>] 23,137,304  1.34MB/s 用时 19s

2020-08-25 20:27:03 (1.17 MB/s) - 已保存 “teleport-server-linux-x64-3.2.2.tar.gz” [23137304/23137304])


[root@localhost teleport]# ll
总用量 22596
-rw-r--r-- 1 root root 23137304 1月  23 2019 teleport-server-linux-x64-3.2.2.tar.gz

[root@localhost ~]# systemctl stop firewalld

[root@localhost ~]# sed -i 's/enforcing/disabled/' /etc/selinux/config

[root@localhost ~]# cat /etc/selinux/config
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#     disabled - SELinux security policy is enforced.
#     permissive - SELinux prints warnings instead of disabled.
#     disabled - No SELinux policy is loaded.
SELINUX=disabled         //永久关闭
# SELINUXTYPE= can take one of three two values:
#     targeted - Targeted processes are protected,
#     minimum - Modification of targeted policy. Only selected processes are protected.
#     mls - Multi Level Security protection.
SELINUXTYPE=targeted

[root@localhost ~]# iptables -F     //最好是把iptables规则也清空

[root@localhost teleport]# tar -zvxf teleport-server-linux-x64-3.2.2.tar.gz
teleport-server-linux-x64-3.2.2/
teleport-server-linux-x64-3.2.2/data/
teleport-server-linux-x64-3.2.2/data/www/
teleport-server-linux-x64-3.2.2/data/www/teleport/
teleport-server-linux-x64-3.2.2/data/www/teleport/app_bootstrap.py
teleport-server-linux-x64-3.2.2/data/www/teleport/res/
teleport-server-linux-x64-3.2.2/data/www/teleport/res/fonts/
teleport-server-linux-x64-3.2.2/data/www/teleport/res/fonts/001.ttf
teleport-server-linux-x64-3.2.2/data/www/teleport/static/
teleport-server-linux-x64-3.2.2/data/www/teleport/static/css/
teleport-server-linux-x64-3.2.2/data/www/teleport/static/css/login.css
teleport-server-linux-x64-3.2.2/data/www/teleport/static/css/single.css
teleport-server-linux-x64-3.2.2/data/www/teleport/static/css/style.css
teleport-server-linux-x64-3.2.2/data/www/teleport/static/css/dashboard.css

[root@localhost teleport]# ll
总用量 22596
drwxrwxr-x 5 1000 1000       62 1月  23 2019 teleport-server-linux-x64-3.2.2
-rw-r--r-- 1 root root 23137304 1月  23 2019 teleport-server-linux-x64-3.2.2.tar.gz

[root@localhost teleport]# cd teleport-server-linux-x64-3.2.2

[root@localhost teleport-server-linux-x64-3.2.2]# ll
总用量 4
drwxrwxr-x 2 1000 1000  80 9月  17 2018 daemon
drwxrwxr-x 5 1000 1000  39 1月  23 2019 data
drwxrwxr-x 3 1000 1000  33 1月  10 2019 script
-rwxrwxr-x 1 1000 1000 320 1月  23 2019 setup.sh

[root@localhost teleport-server-linux-x64-3.2.2]# ./setup.sh    //执行安装脚本
[]===========================================================================[]
 | Teleport Server Installation                                              |
 |===========================================================================|
 |    ver: 3.2.2                                                             |
 | author: apex.liu@qq.com                                                   |
[]===========================================================================[]

Welcome to install Teleport Server!

NOTICE: There are a few steps need you enter information or make choice,
        if you want to use the DEFAULT choice, just press `Enter` key.
        Otherwise you need enter the highlight character to make choice.


Prepare installation...
 - check local installation ... [not exists]


Set installation path [/usr/local/teleport]:                   //默认的安装路径（回车）
 - copy [/root/teleport/teleport-server-linux-x64-3.2.2/data/bin]
     -> [/usr/local/teleport/bin]
 - copy [/root/teleport/teleport-server-linux-x64-3.2.2/data/www]
     -> [/usr/local/teleport/www]
 - copy [/root/teleport/teleport-server-linux-x64-3.2.2/data/tmp/etc]
     -> [/usr/local/teleport/data/etc]
process [daemon.in] to [/etc/init.d/teleport]
process [start.sh.in] to [/usr/local/teleport/start.sh]
process [stop.sh.in] to [/usr/local/teleport/stop.sh]
process [status.sh.in] to [/usr/local/teleport/status.sh]

start services...
starting teleport web ... [done]
starting teleport core server ... [done]

check services status...
teleport web server is running.
teleport core server is running.

--==[ ALL DONE ]==--

[root@localhost ~]# ss -antulp | grep :7190
tcp    LISTEN     0      128       *:7190                  *:*                   users:(("tp_web",pid=2917,fd=5))