matlab中wavedec2,wavedec2函数详解[通俗易懂]

大家好，又见面了，我是你们的朋友全栈君。

很多人对小波多级分解的wavedec2总是迷惑，今天就详释她！

wavedec2函数:

1.功能:实现图像(即二维信号)的多层分解，多层,即多尺度.

2.格式:[c,s]=wavedec2(X,N,’wname’)

[c,s]=wavedec2(X,N,Lo_D,Hi_D)(我不讨论它)

3.参数说明:对图像X用wname小波基函数实现N层分解,

这里的小波基函数应该根据实际情况选择,具体选择办法可以搜之或者 help WFILTERS

.输出为c,s.

c为各层分解系数,s为各层分解系数长度,也就是大小.

4.c的结构:c=[A(N)|H(N)|V(N)|D(N)|H(N-1)|V(N-1)|D(N-1)|H(N-2)|V(N-2)|D(N-2)|…|H(1)|V(1)|D(1)]

可见,c是一个行向量,即:1*(size(X)),(e.g,X=256*256,then

c大小为:1*(256*256)=1*65536)

A(N)代表第N层低频系数,H(N)|V(N)|D(N)代表第N层高频系数,分别是水平,垂直,对角高频,以此类推,到H(1)|V(1)|D(1).

每个向量是一个矩阵的每列转置的组合存储。原文:Each vector is the vector

column-wise storage of a matrix. 这是你理解A(N) H(N) | V(N) | D(N)

的关键。

很多人对wavedec2和dwt2的输出差别不可理解，后者因为是单层分解，所以低频系数，水平、垂直、对角高频系数就直接以矩阵输出了，没有像wavedec2那样转换成行向量再输出，我想你应该不再迷惑了。

a4c26d1e5885305701be709a3d33442f.png

那么S有什么用呢？

s的结构:是储存各层分解系数长度的,即第一行是A(N)的长度(其实是A(N)的原矩阵的行数和列数),

第二行是H(N)|V(N)|D(N)|的长度,

第三行是

H(N-1)|V(N-1)|D(N-1)的长度,

倒数第二行是H(1)|V(1)|D(1)长度,

最后一行是X的长度(大小)

a4c26d1e5885305701be709a3d33442f.png

从上图可知道：cAn的长度就是32*32，cH1、cV1、cD1的长度都是256*256。

到此为止，你可能要问C的输出为什么是行向量?

1、没有那一种语言能够动态输出参数的个数，更何况C语言写的Matlab

2、各级详细系数矩阵的大小(size)不一样，所以不能组合成一个大的矩阵输出。

因此，把结果作为行向量输出是最好，也是唯一的选择。

另:MATLAB HELP

wavedec2 里面说得非常明白了,呵呵.

wavedec2

Multilevel 2-D

wavelet decomposition Syntax [C,S] =

wavedec2(X,N,’wname’)

[C,S] = wavedec2(X,N,Lo_D,Hi_D)

Description wavedec2 is a two-dimensional wavelet analysis

function.

[C,S] =

wavedec2(X,N,’wname’) returns the wavelet decomposition of the

matrix X at level N, using the wavelet named in string ‘wname’ (see

wfilters for more information).

Outputs are the

decomposition vector C and the corresponding bookkeeping matrix S.

N must be a strictly positive integer (see wmaxlev for more

information).

Instead of giving the

wavelet name, you can give the filters. For [C,S] =

wavedec2(X,N,Lo_D,Hi_D), Lo_D is the decomposition low-pass filter

and Hi_D is the decomposition high-pass filter.

Vector C is organized

as C = [ A(N) | H(N) | V(N) | D(N) | … H(N-1) | V(N-1) | D(N-1) |

… | H(1) | V(1) | D(1) ]. where A, H, V, D, are row vectors such

that A = approximation coefficients H = horizontal detail

coefficients V = vertical detail coefficients D = diagonal detail

coefficients Each vector is the vector column-wise storage of a

matrix.

Matrix S is such that

S(1,:) = size of approximation coefficients(N) S(i,:) = size of

detail coefficients(N-i+2) for i = 2, …N+1 and S(N+2,:) =

size(X)

Examples% The current

extension mode is zero-padding (see dwtmode).

% Load original

image. load woman; % X contains the loaded image.

% Perform

decomposition at level 2 % of X using db1. [c,s] = wavedec2(X,2,’db1′);

% Decomposition

structure organization. sizex = size(X)

sizex =

256

256

sizec = size(c)

sizec =

1

65536

val_s =

s

val_s =

64

64 64

64 128

128 256

256

Algorithm For images, an algorithm similar to the

one-dimensional case is possible for two-dimensional wavelets and

scaling functions obtained from one-dimensional ones by tensor

product. This kind of two-dimensional DWT leads to a decomposition

of approximation coefficients at level j in four components: the

approximation at level j+1, and the details in three orientations

(horizontal, vertical, and diagonal). The following chart describes

the basic decomposition step for images: So, for J=2, the

two-dimensional wavelet tree has the form See Alsodwt, waveinfo,

waverec2, wfilters, wmaxlev ReferencesDaubechies, I. (1992), Ten

lectures on wavelets, CBMS-NSF conference series in applied

mathematics. SIAM Ed. Mallat, S. (1989), “A theory for

multiresolution signal decomposition: the wavelet representation,”

IEEE Pattern Anal. and Machine Intell., vol. 11, no. 7, pp.

674-693. Meyer, Y. (1990), Ondelettes et opérateurs, Tome 1,

Hermann Ed. (English translation: Wavelets and operators, Cambridge

Univ. Press. 1993.

发布者：全栈程序员栈长，转载请注明出处：https://javaforall.cn/163763.html原文链接：https://javaforall.cn