linux smartctl 命令,Linux下硬盘检测工具smartmontools(smartctl)使用方法

安装:

yum install smartmontools

help:

#smartctl –help

smartctl version 5.38 [i686-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen

Home page is http://smartmontools.sourceforge.net/

Usage: smartctl [options] device

============================================ SHOW INFORMATION OPTIONS =====

-h, –help, –usage

Display this help and exit

-V, –version, –copyright, –license

Print license, copyright, and version information and exit

-i, –info

Show identity information for device

-a, –all

Show all SMART information for device

================================== SMARTCTL RUN-TIME BEHAVIOR OPTIONS =====

-q TYPE, –quietmode=TYPE (ATA)

Set smartctl quiet mode to one of: errorsonly, silent, noserial

-d TYPE, –device=TYPE

Specify device type to one of: ata, scsi, marvell, sat, 3ware,N

-T TYPE, –tolerance=TYPE (ATA)

Tolerance: normal, conservative, permissive, verypermissive

-b TYPE, –badsum=TYPE (ATA)

Set action on bad checksum to one of: warn, exit, ignore

-r TYPE, –report=TYPE

Report transactions (see man page)

-n MODE, –nocheck=MODE (ATA)

No check if: never, sleep, standby, idle (see man page)

============================== DEVICE FEATURE ENABLE/DISABLE COMMANDS =====

-s VALUE, –smart=VALUE

Enable/disable SMART on device (on/off)

-o VALUE, –offlineauto=VALUE (ATA)

Enable/disable automatic offline testing on device (on/off)

-S VALUE, –saveauto=VALUE (ATA)

Enable/disable Attribute autosave on device (on/off)

======================================= READ AND DISPLAY DATA OPTIONS =====

-H, –health

Show device SMART health status

-c, –capabilities (ATA)

Show device SMART capabilities

-A, –attributes

Show device SMART vendor-specific Attributes and values

-l TYPE, –log=TYPE

Show device log. TYPE: error, selftest, selective, directory,

background, scttemp[sts,hist]

-v N,OPTION , –vendorattribute=N,OPTION (ATA)

Set display OPTION for vendor Attribute N (see man page)

-F TYPE, –firmwarebug=TYPE (ATA)

Use firmware bug workaround: none, samsung, samsung2,

samsung3, swapid

-P TYPE, –presets=TYPE (ATA)

Drive-specific presets: use, ignore, show, showall

============================================ DEVICE SELF-TEST OPTIONS =====

-t TEST, –test=TEST

Run test. TEST: offline short long conveyance select,M-N

pending,N afterselect,[on|off] scttempint,N[,p]

-C, –captive

Do test in captive mode (along with -t)

-X, –abort

Abort any non-captive test on device

=================================================== SMARTCTL EXAMPLES =====

smartctl –all /dev/hda (Prints all SMART information)

smartctl –smart=on –offlineauto=on –saveauto=on /dev/hda

(Enables SMART on first disk)

smartctl –test=long /dev/hda (Executes extended disk self-test)

smartctl –attributes –log=selftest –quietmode=errorsonly /dev/hda

(Prints Self-Test & Attribute errors)

smartctl –all –device=3ware,2 /dev/sda

smartctl –all –device=3ware,2 /dev/twe0

smartctl –all –device=3ware,2 /dev/twa0

(Prints all SMART info for 3rd ATA disk on 3ware RAID controller)

smartctl –all –device=hpt,1/1/3 /dev/sda

(Prints all SMART info for the SATA disk attached to the 3rd PMPort

of the 1st channel on the 1st HighPoint RAID controller)

简单用法：

1、smartctl -a 检查该设备是否已经打开SMART技术。

2、smartctl -s on 如果没有打开SMART技术，使用该命令打开SMART技术。

3、smartctl -t short 后台检测硬盘，消耗时间短；

smartctl -t long 后台检测硬盘，消耗时间长；

smartctl -C -t short 前台检测硬盘，消耗时间短；

smartctl -C -t long 前台检测硬盘，消耗时间长。其实就是利用硬盘SMART的自检程序。

4、smartctl -X 中断后台检测硬盘。

5、smartctl -l selftest 显示硬盘检测日志。

6、smartctl -l error 显示硬盘错误汇总。

版权声明：本文内容由互联网用户自发贡献，该文观点仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 举报，一经查实，本站将立刻删除。

发布者：全栈程序员栈长，转载请注明出处：https://javaforall.cn/184632.html原文链接：https://javaforall.cn