前往小程序，Get更优阅读体验！
立即前往
文档建议反馈控制台
首页
学习
活动
专区
工具
TVP
最新优惠活动
文章/答案/技术大牛
发布
首页
学习
活动
专区
工具
TVP最新优惠活动
返回腾讯云官网
社区首页 >专栏 >OVS-DPDK

OVS-DPDK

作者头像
后端云
发布于 2022-11-25 18:55:16
1.4K0
发布于 2022-11-25 18:55:16
举报
文章被收录于专栏：后端云后端云

要使用 ovs-dpdk，需要在node上构建 DPDK 并使用相应的 DPDK flag重新构建 ovs。 OVS-DPDK需要从源码编译，因为高度依赖内核等所在机器的环境，并需要配置很多参数以达到高性能。这意味着很难提供一个ovs-dpdk docker镜像来满足所有情况。 OVS-DPDK需要大页内存作为资源。 由于 DPDK 会剥夺系统对 nic 的控制权，我们需要一个 ovs-dpdk 专用的 nic 来传输容器网络，另一个 nic 用于普通主机网络。 普通Pod的ovs网络是在 pod 和 ovs 端口之间放置了一个 veth 对。 veth 的一端移动到容器网络命名空间。不能用 OVS-DPDK 做到这一点。当我们请求一个新的 DPDK 端口时，我们最终会在 /var/run/openvswitch/ 这样的目录中得到一个类似 vhost-user 套接字文件的东西。它不能在命名空间之间移动，它必须被挂载到 pod 中就像一个普通的文件(由 Userspace-CNI 提供的功能)。所以不能使用 OVS-DPDK 作为默认网络。Pod对K8S API不可达，K8S不能对pod进行健康检查。因此，需要依赖 Multus 来连接多个网络。Kernel-OVS 仍然是默认网络。此外，Multus 允许为Pod提供 OVS-DPDK 网络。这是同一个 OVS 实例，但是 DPDK port位于另一个支持 DPDK 的bridge上。 ovs-dpdk创建br和port， ovs 集成网桥类型更改为 netdev ，端口类型更改为 dpdkvhostuser 并设置其他 ovs-dpdk 参数。

准备工作

代码语言：javascript
复制
[root@backendcloud-fedora27 ~]# dnf groupinstall "Development Tools"
[root@backendcloud-fedora27 ~]# dnf groupinstall "Virtualization"
[root@backendcloud-fedora27 ~]# dnf install qemu
[root@backendcloud-fedora27 ~]# dnf install automake tunctl kernel-tools pciutils hwloc numactl
[root@backendcloud-fedora27 ~]# dnf install libpcap-devel
[root@backendcloud-fedora27 ~]# dnf install numactl-devel
[root@backendcloud-fedora27 ~]# dnf install libtool

编译DPDK

代码语言：javascript
复制
[root@backendcloud-fedora27 ~]# tar xf dpdk-17.08.1.tar.xz 
[root@backendcloud-fedora27 ~]# ls
anaconda-ks.cfg  dpdk-17.08.1.tar.xz  dpdk-stable-17.08.1
[root@backendcloud-fedora27 ~]# cd dpdk-
-bash: cd: dpdk-: No such file or directory
[root@backendcloud-fedora27 ~]# cd dpdk-stable-17.08.1/
[root@backendcloud-fedora27 dpdk-stable-17.08.1]# export DPDK_DIR=`pwd`/build
[root@backendcloud-fedora27 dpdk-stable-17.08.1]# make config T=x86_64-native-linuxapp-gcc
Configuration done using x86_64-native-linuxapp-gcc
[root@backendcloud-fedora27 dpdk-stable-17.08.1]# sed -ri 's,(PMD_PCAP=).*,\1y,' build/.config
[root@backendcloud-fedora27 dpdk-stable-17.08.1]# make

make 报错：

代码语言：javascript
复制
/usr/src/kernels/4.18.19-100.fc27.x86_64/Makefile:945: *** "Cannot generate ORC metadata for CONFIG_UNWINDER_ORC=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel".  Stop.language-bash复制代码

安装 elfutils-libelf-devel 解决：

代码语言：javascript
复制
[root@backendcloud-fedora27 dpdk-stable-17.08.1]# yum install -y elfutils-libelf-devel

编译DPDK可以参考 编译DPDK

编译OvS-DPDK

代码语言：javascript
复制
[root@backendcloud-fedora27 ~]# wget http://openvswitch.org/releases/openvswitch-2.8.1.tar.gz
[root@backendcloud-fedora27 ~]# tar -xzvf openvswitch-2.8.1.tar.gz
[root@backendcloud-fedora27 ~]# cd openvswitch-2.8.1/
[root@backendcloud-fedora27 openvswitch-2.8.1]# export OVS_DIR=`pwd`
[root@backendcloud-fedora27 openvswitch-2.8.1]# sudo ./boot.sh
[root@backendcloud-fedora27 openvswitch-2.8.1]# sudo ./configure --with-dpdk="$DPDK_DIR/" CFLAGS="-g -Ofast"
[root@backendcloud-fedora27 openvswitch-2.8.1]# sudo make 'CFLAGS=-g -Ofast -march=native' -j10

Create OvS DB and Start OvS DB-Server

代码语言：javascript
复制
[root@backendcloud-fedora27 openvswitch-2.8.1]# pkill -9 ovs
[root@backendcloud-fedora27 openvswitch-2.8.1]# rm -rf /usr/local/var/run/openvswitch
[root@backendcloud-fedora27 openvswitch-2.8.1]# rm -rf /usr/local/etc/openvswitch/
[root@backendcloud-fedora27 openvswitch-2.8.1]# rm -f /usr/local/etc/openvswitch/conf.db
[root@backendcloud-fedora27 openvswitch-2.8.1]# mkdir -p /usr/local/etc/openvswitch
[root@backendcloud-fedora27 openvswitch-2.8.1]# mkdir -p /usr/local/var/run/openvswitch
[root@backendcloud-fedora27 openvswitch-2.8.1]# cd $OVS_DIR
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./ovsdb/ovsdb-tool create /usr/local/etc/openvswitch/conf.db ./vswitchd/vswitch.ovsschema
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./ovsdb/ovsdb-server --remote=punix:/usr/local/var/run/openvswitch/db.sock --remote=db:Open_vSwitch,Open_vSwitch,manager_options --pidfile --detach
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./utilities/ovs-vsctl --no-wait init

Configure Fedora27 for OvS-DPDK

代码语言：javascript
复制
[root@backendcloud-fedora27 openvswitch-2.8.1]# vim /etc/default/grub
...
GRUB_CMDLINE_LINUX_DEFAULT="default_hugepagesz=1G hugepagesz=1G hugepages=4 hugepagesz=2M hugepages=512 iommu=pt intel_iommu=on"
[root@backendcloud-fedora27 openvswitch-2.8.1]# grub2-mkconfig -o /boot/grub2/grub.cfg
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-4.18.19-100.fc27.x86_64
Found initrd image: /boot/initramfs-4.18.19-100.fc27.x86_64.img
Found linux image: /boot/vmlinuz-0-rescue-98bddbf29a4f40009b8390e2c27a80ac
Found initrd image: /boot/initramfs-0-rescue-98bddbf29a4f40009b8390e2c27a80ac.img
done
[root@backendcloud-fedora27 openvswitch-2.8.1]# reboot

可以设置cpu隔离： GRUB_CMDLINE_LINUX_DEFAULT=”default_hugepagesz=1G hugepagesz=1G hugepages=16 hugepagesz=2M hugepages=2048 iommu=pt intel_iommu=on isolcpus=1-27,29-55”

代码语言：javascript
复制
[root@backendcloud-fedora27 ~]# mkdir -p /mnt/huge
[root@backendcloud-fedora27 ~]# mkdir -p /mnt/huge_2mb
[root@backendcloud-fedora27 ~]# mount -t hugetlbfs hugetlbfs /mnt/huge
[root@backendcloud-fedora27 ~]# mount -t hugetlbfs none /mnt/huge_2mb -o pagesize=2MB
[root@backendcloud-fedora27 ~]# cat /proc/meminfo 
MemTotal:       17650724 kB
MemFree:        11744728 kB
MemAvailable:   11867184 kB
...
HugePages_Total:       4
HugePages_Free:        4
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:    1048576 kB
Hugetlb:         5242880 kB
DirectMap4k:      124736 kB
DirectMap2M:     5273600 kB
DirectMap1G:    13631488 kB
[root@backendcloud-fedora27 ~]# cat /proc/cmdline
BOOT_IMAGE=/vmlinuz-4.18.19-100.fc27.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rhgb quiet default_hugepagesz=1G hugepagesz=1G hugepages=4 hugepagesz=2M hugepages=512 iommu=pt intel_iommu=on

配置OVS-DPDK

代码语言：javascript
复制
[root@backendcloud-fedora27 ~]# modprobe vfio-pci
[root@backendcloud-fedora27 ~]# modprobe openvswitch
[root@backendcloud-fedora27 ~]# cd openvswitch-2.8.1
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./ovsdb/ovsdb-server --remote=punix:/usr/local/var/run/openvswitch/db.sock --remote=db:Open_vSwitch,Open_vSwitch,manager_options --pidfile --detach
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./vswitchd/ovs-vswitchd unix:/usr/local/var/run/openvswitch/db.sock --pidfile --detach
2022-09-22T06:09:08Z|00001|ovs_numa|INFO|Discovered 4 CPU cores on NUMA node 0
2022-09-22T06:09:08Z|00002|ovs_numa|INFO|Discovered 1 NUMA nodes and 4 CPU cores
2022-09-22T06:09:08Z|00003|reconnect|INFO|unix:/usr/local/var/run/openvswitch/db.sock: connecting...
2022-09-22T06:09:08Z|00004|reconnect|INFO|unix:/usr/local/var/run/openvswitch/db.sock: connected
2022-09-22T06:09:08Z|00005|dpdk|INFO|DPDK Disabled - Use other_config:dpdk-init to enable
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./utilities/ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-init=true

配置隔离cpu，memory提高DPDK性能，非必须。

代码语言：javascript
复制
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./utilities/ovs-vsctl set Open_vSwitch . other_config:pmd-cpu-mask=0x10000001
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./utilities/ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-lcore-mask=0xffffffeffffffe
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./utilities/ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-socket-mem="1024,1024"language-bash复制代码

Creating an OvS-DPDK Bridge and Ports

代码语言：javascript
复制
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./utilities/ovs-vsctl show
52de1671-20cc-438c-be6a-d41e7923100b
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./utilities/ovs-vsctl add-br br0 -- set bridge br0 datapath_type=netdev
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./utilities/ovs-vsctl add-port br0 vhost-user1 -- set Interface vhost-user1 type=dpdkvhostuser
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./utilities/ovs-vsctl add-port br0 vhost-user2 -- set Interface vhost-user2 type=dpdkvhostuser
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./utilities/ovs-vsctl show
52de1671-20cc-438c-be6a-d41e7923100b
    Bridge "br0"
        Port "vhost-user1"
            Interface "vhost-user1"
                type: dpdkvhostuser
        Port "br0"
            Interface "br0"
                type: internal
        Port "vhost-user2"
            Interface "vhost-user2"
                type: dpdkvhostuser

Binding Nic Device to DPDK

代码语言：javascript
复制
[root@backendcloud-fedora27 openvswitch-2.8.1]# modprobe vfio-pci
[root@backendcloud-fedora27 openvswitch-2.8.1]# cp ~/dpdk-stable-17.08.1/usertools/dpdk-devbind.py /usr/bin/
[root@backendcloud-fedora27 openvswitch-2.8.1]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 00:0c:29:7a:c2:a0 brd ff:ff:ff:ff:ff:ff
    inet 192.168.126.143/24 brd 192.168.126.255 scope global dynamic ens33
       valid_lft 1442sec preferred_lft 1442sec
    inet6 fe80::7e7a:3d91:e5b0:4a63/64 scope link 
       valid_lft forever preferred_lft forever
3: ens34: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 00:0c:29:7a:c2:aa brd ff:ff:ff:ff:ff:ff
    inet 192.168.126.144/24 brd 192.168.126.255 scope global dynamic ens34
       valid_lft 1398sec preferred_lft 1398sec
    inet6 fe80::49fe:5d8c:8b86:95d8/64 scope link 
       valid_lft forever preferred_lft forever
4: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
    link/ether 52:54:00:30:d1:c3 brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
5: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc fq_codel master virbr0 state DOWN group default qlen 1000
    link/ether 52:54:00:30:d1:c3 brd ff:ff:ff:ff:ff:ff
6: ovs-netdev: <BROADCAST,PROMISC> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 22:0e:6b:c1:4c:91 brd ff:ff:ff:ff:ff:ff
7: br0: <BROADCAST,PROMISC> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 0e:3b:21:02:03:47 brd ff:ff:ff:ff:ff:ff
[root@backendcloud-fedora27 openvswitch-2.8.1]# dpdk-devbind.py --status

Network devices using DPDK-compatible driver
============================================
<none>

Network devices using kernel driver
===================================
0000:02:01.0 '82545EM Gigabit Ethernet Controller (Copper) 100f' if=ens33 drv=e1000 unused=vfio-pci *Active*
0000:02:02.0 '82545EM Gigabit Ethernet Controller (Copper) 100f' if=ens34 drv=e1000 unused=vfio-pci *Active*
...
[root@backendcloud-fedora27 openvswitch-2.8.1]# dpdk-devbind.py --bind=vfio-pci ens34
Routing table indicates that interface 0000:02:02.0 is active. Not modifying
[root@backendcloud-fedora27 openvswitch-2.8.1]# yum install -y net-tools
[root@backendcloud-fedora27 openvswitch-2.8.1]# ifconfig ens34 down
[root@backendcloud-fedora27 openvswitch-2.8.1]# dpdk-devbind.py --bind=vfio-pci ens34
[root@backendcloud-fedora27 openvswitch-2.8.1]# dpdk-devbind.py --status

Network devices using DPDK-compatible driver
============================================
0000:02:02.0 '82545EM Gigabit Ethernet Controller (Copper) 100f' drv=vfio-pci unused=

Network devices using kernel driver
===================================
0000:02:01.0 '82545EM Gigabit Ethernet Controller (Copper) 100f' if=ens33 drv=e1000 unused=vfio-pci *Active*
...

Using DPDK vhost-user Ports with VMs

去官网下载镜像并修改root密码：

代码语言：javascript
复制
[root@backendcloud-fedora27 ~]# virt-customize -a centos7vm1.qcow2 --root-password password:666666
-bash: virt-customize: command not found
[root@backendcloud-fedora27 ~]# dnf install -y libguestfs-tools
[root@backendcloud-centos9 ~]# virt-customize -a centos7vm1.qcow2 --root-password password:666666
[   0.0] Examining the guest ...
[   6.8] Setting a random seed
[   6.8] Setting passwords
[   8.3] SELinux relabelling
[  12.9] Finishing off
[root@backendcloud-centos9 ~]# virt-customize -a centos7vm2.qcow2 --root-password password:666666

启动两个dpdk vm：

代码语言：javascript
复制
qemu-system-x86_64 -m 1024 -smp 4 -cpu host,pmu=off -hda /root/centos7vm1.qcow2 -boot c -enable-kvm -no-reboot -net none -nographic \
-chardev socket,id=char1,path=/usr/local/var/run/openvswitch/vhost-user1 \
-netdev type=vhost-user,id=mynet1,chardev=char1,vhostforce \
-device virtio-net-pci,mac=00:00:00:00:00:01,netdev=mynet1 \
-object memory-backend-file,id=mem,size=1G,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc

qemu-system-x86_64 -m 1024 -smp 4 -cpu host,pmu=off -hda /root/centos7vm2.qcow2 -boot c -enable-kvm -no-reboot -net none -nographic \
-chardev socket,id=char2,path=/usr/local/var/run/openvswitch/vhost-user2 \
-netdev type=vhost-user,id=mynet2,chardev=char2,vhostforce \
-device virtio-net-pci,mac=00:00:00:00:00:02,netdev=mynet2 \
-object memory-backend-file,id=mem,size=1G,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc

若上面的操作是在vmware上操作，需要加上上面额外的参数pmu=off，为了规避vmware的bug。若不加会报下面的错误：

代码语言：javascript
复制
[root@backendcloud-fedora27 ~]# qemu-system-x86_64 -m 1024 -smp 4 -cpu host -hda /root/centos7vm1.qcow2 -boot c -enable-kvm -no-reboot -net none -nographic \
> -chardev socket,id=char1,path=/usr/local/var/run/openvswitch/vhost-user1 \
> -netdev type=vhost-user,id=mynet1,chardev=char1,vhostforce \
> -device virtio-net-pci,mac=00:00:00:00:00:01,netdev=mynet1 \
> -object memory-backend-file,id=mem,size=1G,mem-path=/dev/hugepages,share=on \
> -numa node,memdev=mem -mem-prealloc
qemu-system-x86_64: error: failed to set MSR 0x38d to 0x0
qemu-system-x86_64: /builddir/build/BUILD/qemu-2.10.2/target/i386/kvm.c:1806: kvm_put_msrs: Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
Aborted (core dumped)

安装iperf3，并测试：

代码语言：javascript
复制
[root@localhost ~]# iperf3 -s
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.0.2, port 48462
[  5] local 192.168.0.1 port 5201 connected to 192.168.0.2 port 48464
[ ID] Interval           Transfer     Bandwidth
[  5]   0.00-1.00   sec   828 MBytes  6.95 Gbits/sec                  
[  5]   1.00-2.00   sec   775 MBytes  6.51 Gbits/sec                  
[  5]   2.00-3.00   sec   852 MBytes  7.15 Gbits/sec                  
[  5]   3.00-4.00   sec  1.03 GBytes  8.85 Gbits/sec                  
[  5]   4.00-5.00   sec   928 MBytes  7.79 Gbits/sec                  
[  5]   5.00-6.00   sec   905 MBytes  7.59 Gbits/sec                  
[  5]   6.00-7.00   sec   824 MBytes  6.91 Gbits/sec                  
[  5]   7.00-8.00   sec   962 MBytes  8.07 Gbits/sec                  
[  5]   8.00-9.00   sec   987 MBytes  8.28 Gbits/sec                  
[  5]   9.00-10.00  sec   856 MBytes  7.19 Gbits/sec                  
[  5]  10.00-10.04  sec  35.2 MBytes  7.97 Gbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  5]   0.00-10.04  sec  0.00 Bytes  0.00 bits/sec                  sender
[  5]   0.00-10.04  sec  8.80 GBytes  7.53 Gbits/sec                  receiver
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
代码语言：javascript
复制
[root@localhost ~]# iperf3 -c 192.168.0.1
Connecting to host 192.168.0.1, port 5201
[  4] local 192.168.0.2 port 48464 connected to 192.168.0.1 port 5201
[ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
[  4]   0.00-1.00   sec   861 MBytes  7.22 Gbits/sec  1087    177 KBytes       
[  4]   1.00-2.00   sec   745 MBytes  6.26 Gbits/sec  566    182 KBytes       
[  4]   2.00-3.00   sec   908 MBytes  7.61 Gbits/sec  755    184 KBytes       
[  4]   3.00-4.00   sec  1.01 GBytes  8.66 Gbits/sec  824    212 KBytes       
[  4]   4.00-5.00   sec   935 MBytes  7.85 Gbits/sec  589    165 KBytes       
[  4]   5.00-6.00   sec   875 MBytes  7.34 Gbits/sec  514    194 KBytes       
[  4]   6.00-7.00   sec   850 MBytes  7.13 Gbits/sec  718    188 KBytes       
[  4]   7.00-8.00   sec   983 MBytes  8.25 Gbits/sec  949    158 KBytes       
[  4]   8.00-9.00   sec   930 MBytes  7.80 Gbits/sec  649    180 KBytes       
[  4]   9.00-10.00  sec   892 MBytes  7.48 Gbits/sec  668    147 KBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec  8.80 GBytes  7.56 Gbits/sec  7319             sender
[  4]   0.00-10.00  sec  8.80 GBytes  7.56 Gbits/sec                  receiver

iperf Done.

对比非OVS-DPDK虚拟机

代码语言：javascript
复制
[root@backendcloud-fedora27 ~]# yum -y install wget openssl-devel gcc make python-devel openssl-devel kernel-devel graphviz kernel-debug-devel autoconf automake rpm-build redhat-rpm-config libtool python-twisted-core python-zope-interface PyQt4 desktop-file-utils libcap-ng-devel groff checkpolicy selinux-policy-devel
[root@backendcloud-fedora27 ~]# adduser ovs
[root@backendcloud-fedora27 ~]# su - ovs
[ovs@backendcloud-fedora27 ~]$ mkdir -p ~/rpmbuild/SOURCES
[ovs@backendcloud-fedora27 ~]$ cd ~/rpmbuild/SOURCES
[ovs@backendcloud-fedora27 ~]$ wget http://openvswitch.org/releases/openvswitch-2.5.10.tar.gz
[ovs@backendcloud-fedora27 ~]$ tar -zxvf openvswitch-2.5.10.tar.gz
[ovs@backendcloud-fedora27 ~]$ rpmbuild -bb --nocheck openvswitch-2.5.10/rhel/openvswitch-fedora.spec
[ovs@backendcloud-fedora27 ~]$ exit
[root@backendcloud-fedora27 ~]# yum localinstall yum localinstall /home/ovs/rpmbuild/RPMS/x86_64/openvswitch-2.5.10-1.fc27.x86_64.rpm -y
[root@backendcloud-fedora27 ~]# ovs-vsctl --version
ovs-vsctl (Open vSwitch) 2.5.10
Compiled Sep 22 2022 16:43:31
DB Schema 7.12.1
[root@backendcloud-fedora27 ~]# systemctl start openvswitch.service
[root@backendcloud-fedora27 tmp]# ovs-vsctl show
0425b4a1-cfb0-4cbb-94a8-68bd581ce48e
[root@backendcloud-fedora27 ~]# ovs-vsctl add-br br1
[root@backendcloud-fedora27 tmp]# ovs-vsctl show
0425b4a1-cfb0-4cbb-94a8-68bd581ce48e
    Bridge "br1"
        Port "br1"
            Interface "br1"
                type: internal
    ovs_version: "2.5.10"
[root@backendcloud-fedora27 tmp]# cat test.xml 
<network>
  <name>test</name>
  <forward mode="bridge"/>
  <bridge name="br1"/>
  <virtualport type="openvswitch"/>
</network>
[root@backendcloud-fedora27 tmp]# virsh net-list --all
 Name                 State      Autostart     Persistent
----------------------------------------------------------
 default              active     yes           yes

[root@backendcloud-fedora27 tmp]# virsh net-define test.xml
Network test defined from test.xml

[root@backendcloud-fedora27 tmp]# virsh net-list --all
 Name                 State      Autostart     Persistent
----------------------------------------------------------
 default              active     yes           yes
 test                 inactive   no            yes

[root@backendcloud-fedora27 tmp]# virsh net-start test
Network test started

[root@backendcloud-fedora27 tmp]# virsh net-list --all
 Name                 State      Autostart     Persistent
----------------------------------------------------------
 default              active     yes           yes
 test                 active     no            yes

[root@backendcloud-fedora27 tmp]# ovs-vsctl show
0425b4a1-cfb0-4cbb-94a8-68bd581ce48e
    Bridge "br1"
        Port "br1"
            Interface "br1"
                type: internal
    ovs_version: "2.5.10"
[root@backendcloud-fedora27 tmp]# virt-install --virt-type kvm --name test-vm1 --ram 1024 --boot hd  --disk path=c1.qcow2 --network network=test,mac=52:54:00:aa:69:dd --noautoconsole --keymap=en-us
WARNING  No operating system detected, VM performance may suffer. Specify an OS with --os-variant for optimal results.

Starting install...
Domain creation completed.
[root@backendcloud-fedora27 tmp]# virt-install --virt-type kvm --name test-vm2 --ram 1024 --boot hd  --disk path=c2.qcow2 --network network=test,mac=52:54:00:aa:69:de --noautoconsole --keymap=en-us
WARNING  No operating system detected, VM performance may suffer. Specify an OS with --os-variant for optimal results.

Starting install...
Domain creation completed.
# 不加 "--keymap=en-us" kvm虚拟机会出现键盘乱码
[root@backendcloud-fedora27 tmp]# ovs-vsctl show
0425b4a1-cfb0-4cbb-94a8-68bd581ce48e
    Bridge "br1"
        Port "vnet0"
            Interface "vnet0"
        Port "br1"
            Interface "br1"
                type: internal
        Port "vnet1"
            Interface "vnet1"
    ovs_version: "2.5.10"
本文参与 腾讯云自媒体分享计划，分享自微信公众号。
原始发表：2022-09-22，如有侵权请联系 cloudcommunity@tencent.com 删除
开源
打包
kubernetes
虚拟化

本文分享自 后端云 微信公众号，前往查看

如有侵权，请联系 cloudcommunity@tencent.com 删除。

本文参与 腾讯云自媒体分享计划  ，欢迎热爱写作的你一起参与！

开源
打包
kubernetes
虚拟化
评论
登录后参与评论
0 条评论
热度
最新
登录 后参与评论
推荐阅读
LV.
文章
0
获赞
0
目录
  • 准备工作
  • 编译DPDK
  • 编译OvS-DPDK
  • Create OvS DB and Start OvS DB-Server
  • Configure Fedora27 for OvS-DPDK
  • 配置OVS-DPDK
  • Creating an OvS-DPDK Bridge and Ports
  • Binding Nic Device to DPDK
  • Using DPDK vhost-user Ports with VMs
  • 安装iperf3，并测试：
  • 对比非OVS-DPDK虚拟机
相关产品与服务
容器服务
腾讯云容器服务（Tencent Kubernetes Engine, TKE）基于原生 kubernetes 提供以容器为核心的、高度可扩展的高性能容器管理服务，覆盖 Serverless、边缘计算、分布式云等多种业务部署场景，业内首创单个集群兼容多种计算节点的容器资源管理模式。同时产品作为云原生 Finops 领先布道者，主导开源项目Crane，全面助力客户实现资源优化、成本控制。
产品介绍产品文档
精选特惠 用云无忧
领券

腾讯云开发者

扫码关注腾讯云开发者

扫码关注腾讯云开发者

领取腾讯云代金券

热门产品

热门推荐

更多推荐

Copyright © 2013 - 2024 Tencent Cloud. All Rights Reserved. 腾讯云 版权所有 

深圳市腾讯计算机系统有限公司 ICP备案/许可证号：粤B2-20090059 深公网安备号 44030502008569

腾讯云计算（北京）有限责任公司 京ICP证150476号 |  京ICP备11018762号 | 京公网安备号11010802020287

问题归档专栏文章快讯文章归档关键词归档开发者手册归档开发者手册 Section 归档

Copyright © 2013 - 2024 Tencent Cloud.

All Rights Reserved. 腾讯云 版权所有

登录 后参与评论