blocks|key|2827903|text|你可以在进入你的方法时使用System.Diagnostics.Debugger.Break()。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2827904|像这样的东西，也许是你在作用域中设置的bool？|2827905|#if+DEBUG
++if+(BreakPointEveryMethod)
++++System.Diagnostics.Debugger.Break();
#endif|code-block|syntax|javascript|2827906|在notepad%2B%2B中肯定会有一种快速的方法来添加这个，但是我不确定有没有一种简单的方法可以通过简单的命令行来实现这一点。|2827907|entityMap^0|D|Z|0|0|0|1|9|0^^$0|@$1|2|3|4|5|6|7|Q|8|@$9|R|A|S|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|T|8|@]|D|@]|E|$]]|$1|H|3|I|5|J|7|U|8|@]|D|@]|E|$K|L]]|$1|M|3|N|5|6|7|V|8|@$9|W|A|X|B|C]]|D|@]|E|$]]|$1|O|3|-4|5|6|7|Y|8|@]|D|@]|E|$]]]|P|$]]

You can use <code>System.Diagnostics.Debugger.Break()</code> on entry to your method.

Something like this perhaps with a bool that you set at the scope?

<pre><code>#if DEBUG
 if (BreakPointEveryMethod)
 System.Diagnostics.Debugger.Break();
#endif
</code></pre>

There will be a quick way too add this for sure in <code>notepad++</code> but I am not sure there is a quick and easy way for you to achieve this through a simple command line.

blocks|key|2827909|text|我认为您可以使用如下工具为它创建一个“方面”：postsharp|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|2827910|面向方面的编程允许您将代码添加到每个方法的开头或结尾(通过后处理步骤)。所以添加这行代码很简单：|2827911|+System.Diagnostics.Debugger.Break()|code-block|syntax|javascript|2827912|添加到每个方法中(实际上不需要编辑所有的源代码)。更典型的是，它用于将日志语句添加到每个方法的开头：“end+DrawLine(x=30，y=80，z=12)”和方法的结尾：“log+DrawLine(x，y，z)”。这使得跟随你的程序流程变得容易。|2827913|entityMap|0|LINK|mutability|MUTABLE|url|http://www.sharpcrafters.com/^0|N|9|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@]|9|@$A|V|B|W|1|X]]|C|$]]|$1|D|3|E|5|6|7|Y|8|@]|9|@]|C|$]]|$1|F|3|G|5|H|7|Z|8|@]|9|@]|C|$I|J]]|$1|K|3|L|5|6|7|10|8|@]|9|@]|C|$]]|$1|M|3|-4|5|6|7|11|8|@]|9|@]|C|$]]]|N|$O|$5|P|Q|R|C|$S|T]]]]

I think you create an 'aspect' for it using a tool like: <a href="http://www.sharpcrafters.com/" rel="nofollow">postsharp</a>

Aspect oriented programming allows you to add code to the start or end of every method (through a postprocessing step). So it's trivial to add the line:

<pre><code> System.Diagnostics.Debugger.Break()
</code></pre>

to every method (without actually editing all your sourcecode).
More typically it is used to add log statements to the beginning of every method like: "Entering method DrawLine(x=30,y=80,z=12)" and at the end of a method: "Leaving method DrawLine(x,y,z)". Which makes following the flow of your program easy

blocks|key|2827953|text|This+answer建议使用一个可以按您的要求执行的宏，但我个人的建议是使用分析器-它允许您在运行时暂停和恢复分析(几乎所有的商业分析器都是这样做的)，然后在单击按钮之前单击“开始分析”按钮。在探查器中查看调用树通常是了解应用程序正在做什么的一种非常方便的方法，这比在调试器中单步执行要多得多。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|2827954|更新：这个特性存在于我正在开发的一个名为OzCode的Visual+Studio扩展中。使用OzCode时，当您单击类定义旁边的图标时，您将看到QuickAction：|style|BOLD|2827955|​|2827956|📷|atomic|2827957|2827958|entityMap|0|LINK|mutability|MUTABLE|url|https://stackoverflow.com/a/357807/292555|1|http://www.oz-code.com/|2|IMAGE|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/9c5404eaa778d8b17a4d05823e7b2123.png|imageAlt^0|0|B|0|0|0|3|K|6|1|0|0|0|1|2|0|0^^$0|@$1|2|3|4|5|6|7|13|8|@]|9|@$A|14|B|15|1|16]]|C|$]]|$1|D|3|E|5|6|7|17|8|@$A|18|B|19|F|G]]|9|@$A|1A|B|1B|1|1C]]|C|$]]|$1|H|3|I|5|6|7|1D|8|@]|9|@]|C|$]]|$1|J|3|K|5|L|7|1E|8|@]|9|@$A|1F|B|1G|1|1H]]|C|$]]|$1|M|3|I|5|6|7|1I|8|@]|9|@]|C|$]]|$1|N|3|-4|5|6|7|1J|8|@]|9|@]|C|$]]]|O|$P|$5|Q|R|S|C|$T|U]]|V|$5|Q|R|S|C|$T|W]]|X|$5|Y|R|Z|C|$10|11|12|-4]]]]

<a href="https://stackoverflow.com/a/357807/292555">This answer</a> suggests a macro that will do as you ask, but my personal recommendation would be to use a profiler instead - one that lets you pause and resume profiling on the fly (nearly all of the commercial profilers do), and then hit the "Start Profiling" button just before you do your button click. Viewing the call tree in the profiler is often a very convenient way of gaining insight into what an application is doing, much more than stepping through in the debugger.

UPDATE: This feature exists in a Visual Studio extension that I'm working on called <a href="http://www.oz-code.com" rel="nofollow noreferrer">OzCode</a>. With OzCode, when you click on the icon next to the class definition, you'll see the QuickAction:

<img src="https://i.stack.imgur.com/qoQLH.png" alt="Add Breakpoint to every member in class">

blocks|key|199347|text|这里有一个简单的文本替换的快速而肮脏的方法：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|199348|199349|格式化您的C#文件，以便所有缩进都对齐。你可以在"%5E++++++++{".|ordered-list-item|offset|length|style|CODE|199350|Set+>+Advanced+>+Format+Document|199351|Open+up+text+replace+with+Ctrl%2BH|199352|Set+"Text+to+Find“字段"%5E++++++++{".|199353|Set+"Replace”字段to+this+"++++++++{System.Diagnostics.Debugger.Break();"|199354|Click窗口中的"Use+Regular+Expression“按钮点击"Replace+|199355|”或点击Alt%2BA|199356|If你的文件中有嵌套的枚举、类或结构的类，你会有一些编译器错误。从它们中移除Debug调用，直到代码编译完成。如果您的嵌套类有自己的方法，则必须在替换字符串中使用更多选项卡再次运行此过程。|199357|199358|工作原理:它使用Visual+Studio文档格式化程序，并假设文件中的所有方法都以两个制表符开头，然后是一个"{“。因此，任何以两个制表符和"{“开头的行将被替换为相同的两个制表符、相同的"{”以及对调试器的调用。|199359|如果你的文件有嵌套的枚举等，你会得到编译器错误，因为文本替换不区分方法和枚举。例如，您将看到以下内容：|199360|enum+MyColors
{+System.Diagnostics.Debugger.Break();+//error+here
++++Red,
++++Green,
++++Blue,
}|code-block|syntax|javascript|199361|199362|如果您想要禁用这些断点，我能想到的最好的方法是一个简单的bool。在代码中的某处插入以下内容：|199363|#if+DEBUG
++++++++private+static+bool+_ignoreDebug+=+false;
#endif|199364|(我将#if+DEBUG放在其中作为一个标志，表明此代码仅用于调试。这是不必要的)，然后在上面的步骤#4中，使用这个替换字符串：|199365|"++++++++{if(!_ignoreDebug){System.Diagnostics.Debugger.Break();}"|199366|然后，当你点击一个断点并且不想再点击时，在监视窗口中输入this并点击enter+_ignoreDebug+=+true。要重新打开它，您需要在可以访问_ignoreDebug布尔值的地方插入一个手动断点。|199367|199368|要从你的代码中删除所有这些，要么做另一个文本替换，要么编辑撤销所有内容。|199369|entityMap^0|0|0|O|C|0|6|8|H|F|0|Q|6|0|K|C|0|N|1B|0|0|4|5|0|0|0|0|0|0|0|0|0|3|9|0|0|15|J|24|C|0|0|0^^$0|@$1|2|3|4|5|6|7|1N|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|1O|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|1P|8|@$F|1Q|G|1R|H|I]]|9|@]|A|$]]|$1|J|3|K|5|E|7|1S|8|@$F|1T|G|1U|H|I]|$F|1V|G|1W|H|I]]|9|@]|A|$]]|$1|L|3|M|5|E|7|1X|8|@$F|1Y|G|1Z|H|I]]|9|@]|A|$]]|$1|N|3|O|5|E|7|20|8|@$F|21|G|22|H|I]]|9|@]|A|$]]|$1|P|3|Q|5|E|7|23|8|@$F|24|G|25|H|I]]|9|@]|A|$]]|$1|R|3|S|5|E|7|26|8|@]|9|@]|A|$]]|$1|T|3|U|5|E|7|27|8|@$F|28|G|29|H|I]]|9|@]|A|$]]|$1|V|3|W|5|E|7|2A|8|@]|9|@]|A|$]]|$1|X|3|-4|5|6|7|2B|8|@]|9|@]|A|$]]|$1|Y|3|Z|5|6|7|2C|8|@]|9|@]|A|$]]|$1|10|3|11|5|6|7|2D|8|@]|9|@]|A|$]]|$1|12|3|13|5|14|7|2E|8|@]|9|@]|A|$15|16]]|$1|17|3|-4|5|6|7|2F|8|@]|9|@]|A|$]]|$1|18|3|19|5|6|7|2G|8|@]|9|@]|A|$]]|$1|1A|3|1B|5|14|7|2H|8|@]|9|@]|A|$15|16]]|$1|1C|3|1D|5|6|7|2I|8|@$F|2J|G|2K|H|I]]|9|@]|A|$]]|$1|1E|3|1F|5|14|7|2L|8|@]|9|@]|A|$15|16]]|$1|1G|3|1H|5|6|7|2M|8|@$F|2N|G|2O|H|I]|$F|2P|G|2Q|H|I]]|9|@]|A|$]]|$1|1I|3|-4|5|6|7|2R|8|@]|9|@]|A|$]]|$1|1J|3|1K|5|6|7|2S|8|@]|9|@]|A|$]]|$1|1L|3|-4|5|6|7|2T|8|@]|9|@]|A|$]]]|1M|$]]

Here's a quick and dirty way to do it using a simple text replace:

<ol>
<li>Format your C# file so that all of the indentations are lined up. You can do this in <code>Edit</code> > <code>Advanced</code> > <code>Format Document</code></li>
<li>Open up text replace with <code>Ctrl+H</code></li>
<li>Set the "Text to Find" field this <code>"^ {"</code>.</li>
<li>Set the "Replace" field to this <code>" {System.Diagnostics.Debugger.Break();"</code></li>
<li>Click the little "Use Regular Expressions" button in the window</li>
<li>Click "Replace All" or hit <code>Alt+A</code></li>
<li>If your file has any classes with nested enums, classes, or structs, you'll have some compiler errors. Remove the Debug calls from them until your code compiles. If your nested classes have their own methods, you'll have to run this process again with more tabs in the replace strings.</li>
</ol>

How this works: This uses the Visual Studio document formatter and assumes that all methods in a file start with two tabs and then a "{". So any line that starts with two tabs and a "{" will get replaced with the same two tabs, the same "{", and a call to the Debugger.

If your file has nested enums etc., you'll get compiler errors because the text replace doesn't discriminate between methods and enums. For example, you'll see this:

<pre><code>enum MyColors
{ System.Diagnostics.Debugger.Break(); //error here
 Red,
 Green,
 Blue,
}
</code></pre>

<hr>

If you want the ability to disable these breakpoints, the best way I can think of is a simple bool. Somewhere in your code, insert this: 

<pre><code>#if DEBUG
 private static bool _ignoreDebug = false;
#endif
</code></pre>

(I put the <code>#if DEBUG</code> in there as a flag that this code is only for debugging. It's not necessary) Then in step #4 above, use this replace string instead:

<pre><code>" {if(!_ignoreDebug){System.Diagnostics.Debugger.Break();}"
</code></pre>

Then when you hit a breakpoint and don't want to hit any more, in the watch window type this and hit enter <code>_ignoreDebug = true</code>. To turn it back on you'll need to insert a manual breakpoint somewhere that has access to the <code>_ignoreDebug</code> bool.

<hr>

To remove all of this from your code, either do another text replace, or just edit undo everything.

blocks|key|2828011|text|您可以使用我的Runtime+Flow扩展来查看按下按钮后调用的所有方法，而无需设置断点。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|2828012|entityMap|0|LINK|mutability|MUTABLE|url|https://vlasovstudio.com/runtime-flow/^0|7|C|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@$A|M|B|N|1|O]]|C|$]]|$1|D|3|-4|5|6|7|P|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]]]

You can use my <a href="https://vlasovstudio.com/runtime-flow/" rel="nofollow noreferrer">Runtime Flow</a> extension to see all methods called after press of a button without setting breakpoints.

I have a bigger (c#) WPF application with <code>n-classes</code> and <code>m-methods</code>. I would like to place in every single method a breakpoint, so everytime i press a button in my application or any method gets called, i would like the application in VS2010 to hit that breakpoint. I want to understand the flow/progress of the application.

And since i have many methods i would rather not place manually in every and each of them a breakpoint. 

Is there any command or tool to place everywhere in my VS2010 solution a breakpoint?

edit: maybe something like the following addin: <a href="http://weblogs.asp.net/uruit/archive/2011/08/04/visual-studio-2010-addin-setting-a-class-breakpoint.aspx">http://weblogs.asp.net/uruit/archive/2011/08/04/visual-studio-2010-addin-setting-a-class-breakpoint.aspx</a>

edit2: there are some answers but none of them seems like the straight forward easy solution. Anything else?

How to set a breakpoint in every method in VS2010

Visual Studio

编译器

调试器

我有一个使用n-classes和m-methods的更大的(c#) WPF应用程序。我想在每个方法中放置一个断点，所以每次我按下应用程序中的按钮或调用任何方法时，我都希望VS2010中的应用程序命中该断点。我想了解应用程序的流程/进度。因为我有很多方法，所以我不想在每个方法中都手动设置断点。有没有什么命令或工具可以在我...

问如何在VS2010中的每个方法中设置断点
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何在VS2010中的每个方法中设置断点EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何在VS2010中的每个方法中设置断点
EN