blocks|key|1903165|text|我没有足够的名气在最上面的答案中添加评论，但是有了别名的力量，你只需输入以下内容就可以了：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1903166|powershell+"start+cmd+-v+runAs"|code-block|syntax|javascript|1903167|这只是user3018703卓越解决方案的简短版本：|1903168|powershell+-Command+"Start-Process+cmd+-Verb+RunAs"|1903169|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|N|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|O|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

I don't have enough reputation to add a comment to the top answer, but with the power of aliases you can get away with just typing the following:

<pre><code>powershell "start cmd -v runAs"
</code></pre>

This is just a shorter version of user3018703 excellent 
solution:

<pre><code>powershell -Command "Start-Process cmd -Verb RunAs"
</code></pre>

blocks|key|1902900|text|以下作为批处理文件将打开一个提升的命令提示符，并将路径设置为与调用批处理文件的目录相同的目录|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1902901|set+OLDDIR=%25CD%25
powershell+-Command+"Start-Process+cmd+-ArgumentList+'/K+cd+%25OLDDIR%25'+-Verb+RunAs+"|code-block|syntax|javascript|1902902|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

The following as a batch file will open an elevated command prompt with the path set to the same directory as the one from where the batch file was invoked

<pre><code>set OLDDIR=%CD%
powershell -Command "Start-Process cmd -ArgumentList '/K cd %OLDDIR%' -Verb RunAs "
</code></pre>

blocks|key|1689279|text|我最喜欢的方法是使用SysInternals的PsExec.exe，可以在http://technet.microsoft.com/en-us/sysinternals/bb897553上找到|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|1689280|.\psexec.exe+-accepteula+-h+-u+"$username"+-p+"$password"+cmd.exe|code-block|syntax|javascript|1689281|"-h“开关就是这个神奇的开关：|1689282|-h如果目标系统是Vista或更高版本，则使用帐户的提升令牌(如果可用)运行进程。|1689283|entityMap|0|LINK|mutability|MUTABLE|url|http://technet.microsoft.com/en-us/sysinternals/bb897553^0|11|1K|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@]|9|@$A|V|B|W|1|X]]|C|$]]|$1|D|3|E|5|F|7|Y|8|@]|9|@]|C|$G|H]]|$1|I|3|J|5|6|7|Z|8|@]|9|@]|C|$]]|$1|K|3|L|5|6|7|10|8|@]|9|@]|C|$]]|$1|M|3|-4|5|6|7|11|8|@]|9|@]|C|$]]]|N|$O|$5|P|Q|R|C|$S|T]]]]

My favorite way of doing this is using PsExec.exe from SysInternals, available at <a href="http://technet.microsoft.com/en-us/sysinternals/bb897553" rel="noreferrer">http://technet.microsoft.com/en-us/sysinternals/bb897553</a>

<pre><code>.\psexec.exe -accepteula -h -u "$username" -p "$password" cmd.exe
</code></pre>

The "-h" switch is the one doing the magic:

-h If the target system is Vista or higher, has the process run with the account's elevated token, if available.

blocks|key|1689705|text|使用/savecred开关使批处理文件保存实际管理员帐户的凭据。这将在第一次提示输入凭据，然后将加密密码存储在凭据管理器中。然后，对于所有后续运行的批处理，它将以完全管理员身份运行，但不会提示输入凭据，因为它们被加密存储在凭据管理器中，并且最终用户无法获得密码。以下命令应使用完全管理员权限打开提升的CMD，并且仅在第一次输入密码时提示输入密码：|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1689706|START+c:\Windows\System32\runas.exe+/user:Administrator+/savecred+cmd.exe|code-block|syntax|javascript|1689707|entityMap^0|2|9|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@$9|N|A|O|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|P|8|@]|D|@]|E|$I|J]]|$1|K|3|-4|5|6|7|Q|8|@]|D|@]|E|$]]]|L|$]]

Make the batch file save the credentials of the actual administrator account by using the <code>/savecred</code> switch. This will prompt for credentials the first time and then store the encrypted password in credential manager. Then for all subsequent times the batch runs it will run as the full admin but not prompt for credentials because they are stored encrypted in credential manager and the end user is unable to get the password. The following should open an elevated CMD with full administrator privileges and will only prompt for password the first time:

<pre><code>START c:\Windows\System32\runas.exe /user:Administrator /savecred cmd.exe
</code></pre>

blocks|key|1689532|text|我使用Elevate已经有一段时间了。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1689533|它的描述-+This+utility+executes+a+command+with+UAC+privilege+elevation.+This+is+useful+for+working+inside+command+prompts+or+with+batch+files.|1689534|我将bin.x86-64\elevate.exe从.zip复制到C:\Program+Files\elevate，并将该路径添加到我的PATH中。|1689535|然后，我可以运行类似elevate+sc+stop+W3SVC的命令来关闭IIS服务。|1689536|运行该命令将显示UAC对话框，并使用键盘控制进行适当的聚焦，在接受该对话框后，我将返回到我的shell。|1689537|entityMap|0|LINK|mutability|MUTABLE|url|http://code.kliu.org/misc/elevate/^0|3|7|3|7|0|0|6|3O|0|2|M|P|4|W|O|1V|4|0|A|L|11|3|0|8|3|0^^$0|@$1|2|3|4|5|6|7|V|8|@$9|W|A|X|B|C]]|D|@$9|Y|A|Z|1|10]]|E|$]]|$1|F|3|G|5|6|7|11|8|@$9|12|A|13|B|C]]|D|@]|E|$]]|$1|H|3|I|5|6|7|14|8|@$9|15|A|16|B|C]|$9|17|A|18|B|C]|$9|19|A|1A|B|C]|$9|1B|A|1C|B|C]]|D|@]|E|$]]|$1|J|3|K|5|6|7|1D|8|@$9|1E|A|1F|B|C]|$9|1G|A|1H|B|C]]|D|@]|E|$]]|$1|L|3|M|5|6|7|1I|8|@$9|1J|A|1K|B|C]]|D|@]|E|$]]|$1|N|3|-4|5|6|7|1L|8|@]|D|@]|E|$]]]|O|$P|$5|Q|R|S|E|$T|U]]]]

I've been using <a href="http://code.kliu.org/misc/elevate/" rel="nofollow noreferrer"><code>Elevate</code></a> for awhile now.

It's description - <code>This utility executes a command with UAC privilege elevation. This is useful for working inside command prompts or with batch files.</code>

I copy the <code>bin.x86-64\elevate.exe</code> from the <code>.zip</code> into <code>C:\Program Files\elevate</code> and add that path to my <code>PATH</code>.

Then GitBash I can run something like <code>elevate sc stop W3SVC</code> to turn off the <code>IIS</code> service.

Running the command gives me the <code>UAC</code> dialog, properly focused with keyboard control and upon accepting the dialog I return to my shell.

blocks|key|1903072|text|。。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1903073|@ECHO+OFF
SETLOCAL+EnableDelayedExpansion+EnableExtensions
NET+SESSION+>nul+2>&1
IF+%25ERRORLEVEL%25+NEQ+0+GOTO+ELEVATE
GOTO+:EOF

:ELEVATE
SET+this="%25CD%25"
SET+this=!this:\=\\!

MSHTA+"javascript:+var+shell+=+new+ActiveXObject('shell.application');+shell.ShellExecute('CMD',+'/K+CD+/D+\"!this!\"',+'',+'runas',+1);close();"
EXIT+1|code-block|syntax|javascript|1903074|将此脚本另存为system32中的"god.cmd“或您的路径指向的任何位置...|1903075|如果您在e:\mypictures\中打开一个cmd，并输入上帝，它将要求您提供凭据，并将您带回与管理员相同位置...|1903076|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|N|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|O|8|@]|9|@]|A|$]]|$1|I|3|J|5|6|7|P|8|@]|9|@]|A|$]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

..

<pre><code>@ECHO OFF
SETLOCAL EnableDelayedExpansion EnableExtensions
NET SESSION &gt;nul 2&gt;&amp;1
IF %ERRORLEVEL% NEQ 0 GOTO ELEVATE
GOTO :EOF

:ELEVATE
SET this="%CD%"
SET this=!this:\=\\!

MSHTA "javascript: var shell = new ActiveXObject('shell.application'); shell.ShellExecute('CMD', '/K CD /D \"!this!\"', '', 'runas', 1);close();"
EXIT 1
</code></pre>

save this script as "god.cmd" in your system32 or whatever your path is directing to.... 

if u open a cmd in e:\mypictures\ and type god
it will ask you for credentials and put you back to that same place as the administrator...

blocks|key|1903203|text|Dheeraj+Bhaskar的Powershell方法中缺少一个空格，至少对于Windows+10版本的Powershell来说是如此。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1903204|他的sudo.bat中的命令行应该是|1903205|powershell.exe+-Command+"Start-Process+cmd+\"/k+cd+/d+%25cd%25+\"+-Verb+RunAs"|code-block|syntax|javascript|1903206|请注意%25cd%25之后的额外空间|1903207|；)弗罗德|1903208|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|P|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|Q|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|R|8|@]|9|@]|A|$]]|$1|K|3|L|5|6|7|S|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

Dheeraj Bhaskar's method with Powershell has a missing space in it, alt least for the Windows 10 incarnation of Powershell.

The command line inside his sudo.bat should be

<pre><code>powershell.exe -Command "Start-Process cmd \"/k cd /d %cd% \" -Verb RunAs"
</code></pre>

Note the extra space after %cd%

;)Frode

blocks|key|1903339|text|在这方面似乎有很多真正有创意的解决方案，但我发现Stiegler+&+Gui对我来说是最有意义的。我正在研究如何做到这一点，但使用它与我的域管理员凭据，而不是依赖于“当前用户”的本地权限。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|1903340|这是我想出来的：|1903341|runas+/noprofile+/user:DomainName\UserName+"powershell+start+cmd+-v+runas"|code-block|syntax|javascript|1903342|它看起来可能是多余的，但它确实会提示输入我的管理员密码，并且会显示为一个提升的命令提示符。|1903343|entityMap|0|LINK|mutability|MUTABLE|url|https://stackoverflow.com/users/567105/stiegler|1|https://stackoverflow.com/users/3018703/gui^0|O|8|0|Z|3|1|0|0|0|0^^$0|@$1|2|3|4|5|6|7|W|8|@]|9|@$A|X|B|Y|1|Z]|$A|10|B|11|1|12]]|C|$]]|$1|D|3|E|5|6|7|13|8|@]|9|@]|C|$]]|$1|F|3|G|5|H|7|14|8|@]|9|@]|C|$I|J]]|$1|K|3|L|5|6|7|15|8|@]|9|@]|C|$]]|$1|M|3|-4|5|6|7|16|8|@]|9|@]|C|$]]]|N|$O|$5|P|Q|R|C|$S|T]]|U|$5|P|Q|R|C|$S|V]]]]

There seem to be a lot of really creative solutions on this, but I found <a href="https://stackoverflow.com/users/567105/stiegler">Stiegler</a> &amp; <a href="https://stackoverflow.com/users/3018703/gui">Gui</a> made the most sense to me. I was looking into how I could do this, but using it in conjunction with my domain admin credential, instead of relying on the local permissions of the &quot;current user&quot;.
This is what I came up with:
<pre><code>runas /noprofile /user:DomainName\UserName &quot;powershell start cmd -v runas&quot;
</code></pre>
It may seem redundant, but it does prompt for my admin password, and does come up as an elevated command prompt.

blocks|key|1689367|text|与上面的一些其他解决方案类似，我创建了一个运行提升的PowerShell窗口的elevate批处理文件，绕过了执行策略以允许运行从简单命令到批处理文件到复杂PowerShell脚本的所有内容。我建议将其放在C:\Windows\System32文件夹中以便于使用。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1689368|原始elevate命令执行其任务，捕获输出，关闭衍生的PowerShell窗口，然后返回，将捕获的输出写出到原始窗口。|1689369|我创建了两个变体，elevatep和elevatex，它们分别暂停和保持PowerShell窗口打开以完成更多工作。|1689370|https://github.com/jt-github/elevate|1689371|以防我的链接失效，下面是原始elevate批处理文件的代码：|1689372|@Echo+Off
REM+Executes+a+command+in+an+elevated+PowerShell+window+and+captures/displays+output
REM+Note+that+any+file+paths+must+be+fully+qualified!

REM+Example:+elevate+myAdminCommand+-myArg1+-myArg2+someValue

if+"%251"==""+(
++++REM+If+no+command+is+passed,+simply+open+an+elevated+PowerShell+window.
++++PowerShell+-Command+"&+{Start-Process+PowerShell.exe+-Wait+-Verb+RunAs}"
)+ELSE+(
++++REM+Copy+command%2Barguments+(passed+as+a+parameter)+into+a+ps1+file
++++REM+Start+PowerShell+with+Elevated+access+(prompting+UAC+confirmation)
++++REM+++++and+run+the+ps1+file
++++REM+++++then+close+elevated+window+when+finished
++++REM+Output+captured+results

++++IF+EXIST+%25temp%25\trans.txt+del+%25temp%25\trans.txt
++++Echo+%25*+%5E>+%25temp%25\trans.txt+*%5E>%5E&1+>+%25temp%25\tmp.ps1
++++Echo+$error[0]+%5E%7C+Add-Content+%25temp%25\trans.txt+-Encoding+Default+>>+%25temp%25\tmp.ps1
++++PowerShell+-Command+"&+{Start-Process+PowerShell.exe+-Wait+-ArgumentList+'-ExecutionPolicy+Bypass+-File+""%25temp%25\tmp.ps1""'+-Verb+RunAs}"
++++Type+%25temp%25\trans.txt
)|code-block|syntax|javascript|1689373|entityMap|0|LINK|mutability|MUTABLE|url^0|13|7|0|2|7|0|9|8|I|8|0|0|10|0|0|0|0^^$0|@$1|2|3|4|5|6|7|Z|8|@$9|10|A|11|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|12|8|@$9|13|A|14|B|C]]|D|@]|E|$]]|$1|H|3|I|5|6|7|15|8|@$9|16|A|17|B|C]|$9|18|A|19|B|C]]|D|@]|E|$]]|$1|J|3|K|5|6|7|1A|8|@]|D|@$9|1B|A|1C|1|1D]]|E|$]]|$1|L|3|M|5|6|7|1E|8|@]|D|@]|E|$]]|$1|N|3|O|5|P|7|1F|8|@]|D|@]|E|$Q|R]]|$1|S|3|-4|5|6|7|1G|8|@]|D|@]|E|$]]]|T|$U|$5|V|W|X|E|$Y|K]]]]

Similar to some of the other solutions above, I created an <code>elevate</code> batch file which runs an elevated PowerShell window, bypassing the execution policy to enable running everything from simple commands to batch files to complex PowerShell scripts. I recommend sticking it in your C:\Windows\System32 folder for ease of use.

The original <code>elevate</code> command executes its task, captures the output, closes the spawned PowerShell window and then returns, writing out the captured output to the original window.

I created two variants, <code>elevatep</code> and <code>elevatex</code>, which respectively pause and keep the PowerShell window open for more work.

<a href="https://github.com/jt-github/elevate" rel="nofollow noreferrer">https://github.com/jt-github/elevate</a>

And in case my link ever dies, here's the code for the original elevate batch file:

<pre><code>@Echo Off
REM Executes a command in an elevated PowerShell window and captures/displays output
REM Note that any file paths must be fully qualified!

REM Example: elevate myAdminCommand -myArg1 -myArg2 someValue

if "%1"=="" (
 REM If no command is passed, simply open an elevated PowerShell window.
 PowerShell -Command "&amp; {Start-Process PowerShell.exe -Wait -Verb RunAs}"
) ELSE (
 REM Copy command+arguments (passed as a parameter) into a ps1 file
 REM Start PowerShell with Elevated access (prompting UAC confirmation)
 REM and run the ps1 file
 REM then close elevated window when finished
 REM Output captured results

 IF EXIST %temp%\trans.txt del %temp%\trans.txt
 Echo %* ^&gt; %temp%\trans.txt *^&gt;^&amp;1 &gt; %temp%\tmp.ps1
 Echo $error[0] ^| Add-Content %temp%\trans.txt -Encoding Default &gt;&gt; %temp%\tmp.ps1
 PowerShell -Command "&amp; {Start-Process PowerShell.exe -Wait -ArgumentList '-ExecutionPolicy Bypass -File ""%temp%\tmp.ps1""' -Verb RunAs}"
 Type %temp%\trans.txt
)
</code></pre>

blocks|key|1689870|text|对于Cygwin的粉丝：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1689871|cygstart+-a+runas+cmd|code-block|syntax|javascript|1689872|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

For fans of Cygwin:
<pre><code>cygstart -a runas cmd
</code></pre>

blocks|key|1689941|text|使用：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1689942|start、run、cmd，然后是control%2Bshift%2Benter|offset|length|style|CODE|1689943|您将获得UAC，然后是一个提升的命令shell。|1689944|entityMap^0|0|0|5|6|3|A|3|H|J|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|M|8|@$D|N|E|O|F|G]|$D|P|E|Q|F|G]|$D|R|E|S|F|G]|$D|T|E|U|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|V|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|W|8|@]|9|@]|A|$]]]|K|$]]

Use:
<code>start</code>, <code>run</code>, <code>cmd</code>, then <code>control+shift+enter</code>
You'll get UAC and then an elevated command shell.

blocks|key|1689750|text|可以使用临时环境变量来使用提升的快捷方式(|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1689751|start.cmd|1689752|setx+valueName_betterSpecificForEachCase+%25~dp0
"%25~dp0ascladm.lnk"|code-block|syntax|javascript|1689753|ascladm.lnk+(快捷方式)|1689754|_+properties\advanced\"run+as+administrator"=yes|1689755|(要更改路径，您需要临时创建env.Variable)|offset|length|style|CODE|1689756|_+properties\target="%25valueName_betterSpecificForEachCase%25\ascladm.cmd"

_+properties\"start+in"="%25valueName_betterSpecificForEachCase%25"|1689757|ascladm.cmd|1689758|setx+valueName_betterSpecificForEachCase=
reg+delete+HKEY_CURRENT_USER\Environment+/F+/V+valueName_betterSpecificForEachCase
"%25~dp0fileName_targetedCmd.cmd"|1689759|)+(targetedCmd在提升的命令窗口中执行)|1689760|虽然它是3个文件，但您可以将所有内容(包括targetedCmd)放在某个子文件夹中(不要忘记将folderName添加到补丁中)，并将"start.cmd“重命名为targeted的一个名称|1689761|对我来说，这看起来像是大多数本机方法，而cmd没有所需的命令|1689762|entityMap^0|0|0|0|0|0|E|C|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|16|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|17|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|18|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|19|8|@]|9|@]|A|$]]|$1|K|3|L|5|F|7|1A|8|@]|9|@]|A|$G|H]]|$1|M|3|N|5|6|7|1B|8|@$O|1C|P|1D|Q|R]]|9|@]|A|$]]|$1|S|3|T|5|F|7|1E|8|@]|9|@]|A|$G|H]]|$1|U|3|V|5|6|7|1F|8|@]|9|@]|A|$]]|$1|W|3|X|5|F|7|1G|8|@]|9|@]|A|$G|H]]|$1|Y|3|Z|5|6|7|1H|8|@]|9|@]|A|$]]|$1|10|3|11|5|6|7|1I|8|@]|9|@]|A|$]]|$1|12|3|13|5|6|7|1J|8|@]|9|@]|A|$]]|$1|14|3|-4|5|6|7|1K|8|@]|9|@]|A|$]]]|15|$]]

Can use a temporary environment variable to use with an elevated shortcut (

start.cmd

<pre><code>setx valueName_betterSpecificForEachCase %~dp0
"%~dp0ascladm.lnk"
</code></pre>

ascladm.lnk (shortcut)

<pre><code>_ properties\advanced\"run as administrator"=yes
</code></pre>

(to make path changes you'll need to temporarily create the <code>env.Variable</code>)

<pre><code>_ properties\target="%valueName_betterSpecificForEachCase%\ascladm.cmd"

_ properties\"start in"="%valueName_betterSpecificForEachCase%"
</code></pre>

ascladm.cmd

<pre><code>setx valueName_betterSpecificForEachCase=
reg delete HKEY_CURRENT_USER\Environment /F /V valueName_betterSpecificForEachCase
"%~dp0fileName_targetedCmd.cmd"
</code></pre>

) (targetedCmd gets executed in elevated cmd window)

Although it is 3 files ,you can place everything (including targetedCmd) in some subfolder (do not forget to add the folderName to the patches) and rename "start.cmd" to targeted's one name

For me it looks like most native way of doing this ,whilst cmd doesn't have the needed command

blocks|key|1903227|text|只需使用命令:+runas+/noprofile+/user:administrator+cmd|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1903228|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Just use the command:
runas /noprofile /user:administrator cmd

blocks|key|1689818|text|按Windows+%2BX组合键，您现在可以选择Powershell或具有管理员权限的命令提示符。如果您是管理员，则有效。如果系统不是您的系统，则该函数可能无法使用。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1689819|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Press the Windows + X key and you can now select the Powershell or Command Prompt with admin rights. Works if you are the admin. The function can be unusable if the system is not yours.

blocks|key|1689174|text|我使用runas+/user:domainuser@domain+cmd，它成功地打开了一个提升的提示符。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1689175|entityMap^0|3|X|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|K|8|@]|D|@]|E|$]]]|G|$]]

I used <code>runas /user:domainuser@domain cmd</code> which opened an elevated prompt successfully.

blocks|key|1902496|text|有几种方法可以打开提升的cmd，但只有您的方法可以从标准命令提示符运行。你只需要把user而不是username|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1902497|runas+/user:machinename\adminuser+cmd|code-block|syntax|javascript|1902498|请参阅Microsoft+community提供的相关帮助。|1902499|entityMap|0|LINK|mutability|MUTABLE|url|http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/command-to-elevate-a-command-prompt-to-an/e8900dae-73e4-4232-a549-c0010f9e592f^0|15|4|1C|8|0|0|3|J|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@$9|V|A|W|B|C]|$9|X|A|Y|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|Z|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|10|8|@]|D|@$9|11|A|12|1|13]]|E|$]]|$1|M|3|-4|5|6|7|14|8|@]|D|@]|E|$]]]|N|$O|$5|P|Q|R|E|$S|T]]]]

There are several ways to open an elevated cmd, but only your method works from the standard command prompt. You just need to put <code>user</code> not <code>username</code>:

<pre><code>runas /user:machinename\adminuser cmd
</code></pre>

See relevant help from <a href="http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/command-to-elevate-a-command-prompt-to-an/e8900dae-73e4-4232-a549-c0010f9e592f" rel="nofollow">Microsoft community</a>.

How do I open a elevated command prompt using command lines on a normal cmd?

For example, I use <code>runas /username:admin cmd</code> but the cmd that was opened does not seem to be elevated! Any solutions?

How to open an elevated cmd using command line for Windows?

Windows

如何在普通cmd上使用命令行打开提升的命令提示符？例如，我使用runas /username:admin cmd，但打开的cmd似乎没有提升！有什么解决方案吗？

问如何使用Windows命令行打开提升的cmd？
EN

回答 16

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何使用Windows命令行打开提升的cmd？EN

回答 16

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何使用Windows命令行打开提升的cmd？
EN