Arduino : avrdude: stk500_recv()：程序员没有响应
Arduino : avrdude: stk500_recv()：程序员没有响应
提问于 2017-11-17 00:02:36
我目前正在尝试使用Arduino和蓝牙模块在Android智能手机上控制RGB LED。如下链接教程所示。
http://www.instructables.com/id/Controlling-an-RGB-LED-With-an-Android-Smartphone-/
我用的是Arduino Uno我按照教程和代码上传到Arduino，然后显示如下错误信息，无法上传到Arduino。
avrdude: Version 6.3, compiled on Jan 17 2017 at 12:01:35
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/Applications/Arduino.app/
Contents/Java/hardware/tools/avr/etc/avrdude.conf"
User configuration file is "/Users/kyawzinwai/.avrduderc"
User configuration file does not exist or is not a regular file,
skipping
Using Port : /dev/cu.usbmodem1421
Using Programmer : arduino
Overriding Baud Rate : 115200
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync:
resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync:
resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync:
resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync:
resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync:
resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync:
resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync:
resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync:
resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync:
resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync:
resp=0x00
avrdude done. Thank you.
Problem uploading to board. See
http://www.arduino.cc/en/Guide/Troubleshooting#upload for
suggestions.回答 6
Stack Overflow用户
发布于 2017-11-17 11:50:16
我终于可以解决这个问题了。从Arduino Dev Board移除所有导线，仅在上传完成后将草图上传到dev board。再次重新连接所有电线并完成连接。
Stack Overflow用户
发布于 2017-11-17 02:20:39
Stack Overflow用户
发布于 2018-06-03 01:53:42
希望这能帮助到一些人。我得到了同样的错误"avrdude: stk500_recv()：programmer is not responding“，因为我的COM端口没有正确连接，尽管它显示为我的主板通过COM1端口连接。我的详细信息是Arduino: 1.8.5 (Windows 8.1)，Board："Arduino/Genuino Uno“
我不得不在Windows8.1中禁用驱动程序签名强制，之后我从device manager.Once安装了驱动程序，我重启了我的PC，然后在Arduino IDE的端口列表中只显示了COM4。
页面原文内容由Stack Overflow提供。腾讯云小微IT领域专用引擎提供翻译支持
原文链接：
https://stackoverflow.com/questions/47334139
复制相关文章
相似问题