entityMap|blocks|key|7i1sv|text|GoogleToolboxForMac是Firebase/Messaging的依赖项。详细信息请参阅|type|unstyled|depth|inlineStyleRanges|entityRanges|data|64ahs|播客规范|flc5o|..。当做"pod更新“时，Cocoapods应该设置你的工作区来构建和链接GoogleToolboxForMac。|a9597|听起来你的工作区有些地方不太好。产品->清洁有帮助吗？如何删除派生数据和ModuleCache+(Xcode+->首选项->+Locations+->派生数据)？|qfv6|这应该不是必需的，但您也可以尝试显式地将pod+'GoogleToolboxForMac/Logger‘添加到您的Podfile中。^0|0|0|0|0^^$0|$]|1|@$2|3|4|5|6|7|8|K|9|@]|A|@]|B|$]]|$2|C|4|D|6|7|8|L|9|@]|A|@]|B|$]]|$2|E|4|F|6|7|8|M|9|@]|A|@]|B|$]]|$2|G|4|H|6|7|8|N|9|@]|A|@]|B|$]]|$2|I|4|J|6|7|8|O|9|@]|A|@]|B|$]]]]

GoogleToolboxForMac is a dependency of Firebase/Messaging. Details in the <a href="https://github.com/CocoaPods/Specs/blob/f543c44ff4693ce9b223116f74cb6d4a0288dbba/Specs/2/d/6/FirebaseMessaging/2.0.6/FirebaseMessaging.podspec.json" rel="noreferrer">podspec</a>. When doing "pod update", Cocoapods should set up your workspace to build and link GoogleToolboxForMac.

It sounds like something about your workspace is in a bad state. Does Product -> Clean help? What about deleting Derived Data and the ModuleCache (Xcode -> Preferences -> Locations -> Derived Data)?

It shouldn't be necessary, but you could also try explicitly adding pod 'GoogleToolboxForMac/Logger' to your Podfile.

entityMap|blocks|key|69in4|text|我也犯了同样的错误。安装pods后，您将看到以下消息。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|93qma|4p4q4|啊！|4ed9g|请关闭所有当前的Xcode会话，并从现在开始对此项目使用MyApp.xcworkspace。|2baqd|e80li|我第一次没有注意到这一点，并试图使用常规的xcodeproj文件构建项目。在我看到这条消息后，我打开了正确的项目，它工作得很好。|cebtl|打开此项目后，您会注意到有两个子项目。一个是你的项目，另一个是Pods项目。^0|0|0|0|0|0|0^^$0|$]|1|@$2|3|4|5|6|7|8|M|9|@]|A|@]|B|$]]|$2|C|4|-4|6|7|8|N|9|@]|A|@]|B|$]]|$2|D|4|E|6|7|8|O|9|@]|A|@]|B|$]]|$2|F|4|G|6|7|8|P|9|@]|A|@]|B|$]]|$2|H|4|-4|6|7|8|Q|9|@]|A|@]|B|$]]|$2|I|4|J|6|7|8|R|9|@]|A|@]|B|$]]|$2|K|4|L|6|7|8|S|9|@]|A|@]|B|$]]]]

I had the same error. Once you install the pods, you'll see the following message.

<blockquote>
 [!] Please close any current Xcode sessions and use MyApp.xcworkspace
 for this project from now on.
</blockquote>

I didn't notice this for the first time and was trying to build the project using the regular xcodeproj file. After I saw this message, I opened the right project and it worked fine.

Once you open this project you'll notice that you have two subprojects. One would be your project, and another would be the Pods project.

entityMap|blocks|key|19du1|text|在我的例子中，所有的集成都做得很好，也确实尝试了这么多时间来删除和重新安装pod，但没有成功。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2n538|最后尝试以下步骤|82fss|项目box+>管理方案->选择复选框“Pods我的项目名称”|ct8lb|q3g5|并获得成功。^0|0|0|0|0^^$0|$]|1|@$2|3|4|5|6|7|8|J|9|@]|A|@]|B|$]]|$2|C|4|D|6|7|8|K|9|@]|A|@]|B|$]]|$2|E|4|F|6|7|8|L|9|@]|A|@]|B|$]]|$2|G|4|-4|6|7|8|M|9|@]|A|@]|B|$]]|$2|H|4|I|6|7|8|N|9|@]|A|@]|B|$]]]]

In my case all integration are well-done and also did try so many time to remove and reinstall pod but did not get success.

Finally try with below step

<blockquote>
 Projetc->Manage Schemes -> Select check box "Pods-MyProjectName" 
</blockquote>

And get success.

entityMap|blocks|key|cefur|text|在完成pod安装后，关闭我正在尝试构建的项目，然后打开.workspace，然后一切都会完美构建。|type|unstyled|depth|inlineStyleRanges|entityRanges|data^0^^$0|$]|1|@$2|3|4|5|6|7|8|C|9|@]|A|@]|B|$]]]]

Closed the project that I was trying to build after I did pod install then opened the .workspace and then everything builds perfectly.

entityMap|blocks|key|bres6|text|这是通过添加|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4je76|$(继承)|9on1k|在生成设置->搜索库中|at928|_|a68tn|搜索|cbk05|665or|路径。|ejpjp|这是可以理解的，因为在为项目所依赖的最新版本的库更新pod文件时，调试输出将告诉您需要在何处添加所有$(继承)标志:+LIBRARY|7k33q|6hv8k|5rk48|6gsid|其他路径|3lr8j|9vfqh|LD|5shvo|88m8h|标志GCC|6kjdp|bqmae|预处理器|5m9t9|5r138|定义^0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0^^$0|$]|1|@$2|3|4|5|6|7|8|16|9|@]|A|@]|B|$]]|$2|C|4|D|6|7|8|17|9|@]|A|@]|B|$]]|$2|E|4|F|6|7|8|18|9|@]|A|@]|B|$]]|$2|G|4|H|6|7|8|19|9|@]|A|@]|B|$]]|$2|I|4|J|6|7|8|1A|9|@]|A|@]|B|$]]|$2|K|4|H|6|7|8|1B|9|@]|A|@]|B|$]]|$2|L|4|M|6|7|8|1C|9|@]|A|@]|B|$]]|$2|N|4|O|6|7|8|1D|9|@]|A|@]|B|$]]|$2|P|4|H|6|7|8|1E|9|@]|A|@]|B|$]]|$2|Q|4|J|6|7|8|1F|9|@]|A|@]|B|$]]|$2|R|4|H|6|7|8|1G|9|@]|A|@]|B|$]]|$2|S|4|T|6|7|8|1H|9|@]|A|@]|B|$]]|$2|U|4|H|6|7|8|1I|9|@]|A|@]|B|$]]|$2|V|4|W|6|7|8|1J|9|@]|A|@]|B|$]]|$2|X|4|H|6|7|8|1K|9|@]|A|@]|B|$]]|$2|Y|4|Z|6|7|8|1L|9|@]|A|@]|B|$]]|$2|10|4|H|6|7|8|1M|9|@]|A|@]|B|$]]|$2|11|4|12|6|7|8|1N|9|@]|A|@]|B|$]]|$2|13|4|H|6|7|8|1O|9|@]|A|@]|B|$]]|$2|14|4|15|6|7|8|1P|9|@]|A|@]|B|$]]]]

This was fixed by adding $(inherited) in the Build Settings -> Search for LIBRARY_SEARCH_PATHS. 

This is understandable, since when updating your pod file for the latest versions of libraries which your project depends on, the debug output tells you where you need to add all the $(inherited) flags:
LIBRARY_SEARCH_PATHS
OTHER_LD_FLAGS
GCC_PREPROCESSOR_DEFINITIONS

entityMap|blocks|key|22ca|text|Friends,+you+must+be+confused+with+the+exact+result,+as+i+was.+So,+i+feel+to+share+the+
screenshot+that+might+be+helpful.+We+all+had+to+be+careful+that+we+need+to+change+the+flag+for+property+**"Build+Active+architecture+Only"**+for+**pod+target**+to+**NO**+And+build,+it+would+not+show+the+linking+error.

++++See+the+attached+screenshot.
++++Screen+Shot+1,+Screen+Shot+2,+Screen+Shot+3
++++[Select+Pods][1]
++++[Select+Targets+in+the+pod][2]
++++[Change+flag+to+No][3]


++[1]:+https://i.stack.imgur.com/E7mjX.png
++[2]:+https://i.stack.imgur.com/wCwET.png
++[3]:+https://i.stack.imgur.com/KVGKM.png|type|code-block|depth|inlineStyleRanges|entityRanges|data|syntax|javascript^0^^$0|$]|1|@$2|3|4|5|6|7|8|E|9|@]|A|@]|B|$C|D]]]]

<pre><code> Friends, you must be confused with the exact result, as i was. So, i feel to share the 
screenshot that might be helpful. We all had to be careful that we need to change the flag for property **"Build Active architecture Only"** for **pod target** to **NO** And build, it would not show the linking error.

 See the attached screenshot.
 Screen Shot 1, Screen Shot 2, Screen Shot 3
 [Select Pods][1]
 [Select Targets in the pod][2]
 [Change flag to No][3]


 [1]: https://i.stack.imgur.com/E7mjX.png
 [2]: https://i.stack.imgur.com/wCwET.png
 [3]: https://i.stack.imgur.com/KVGKM.png
</code></pre>

entityMap|0|type|IMAGE|mutability|IMMUTABLE|data|imageUrl|https://ask.qcloudimg.com/http-save/actteam/a0da38273af43a6e33cb6b34d79f534a.png|imageAlt|1|https://ask.qcloudimg.com/http-save/actteam/5a0d14e302797554e756391cb36174df.png|blocks|key|9c36g|text|找不到框架|unstyled|depth|inlineStyleRanges|entityRanges|38q29|在使用Pod时，我们通常会遇到这个问题。|8vdgn|这主要有两个原因|6gq7v|当我们打开|8vpb2|.xcodeproj|9l038|文件，而不是|3gimq|.xcworkspace|6vd76|正如izaaz-尤努斯在这篇文章中提到的|4mf9d|答案|7gs8h|anb7j|何时|713bp|仅构建活动体系结构|e447m|设置为|bbmco|是的|2o8ee|在|4finb|生成设置|9hoem|7s261|这适用于项目目标，也适用于pod项目中的所有目标|6481f|主项目屏幕截图|9c7ns|a5a0f|62nus|?|atomic|offset|length|2ogad|v5b|​|f9bct|Pod项目截图|a5kp6|cb6du|d4heg|ckjsq|82ge9|84un9|选择|80d63|6v5c7|(主项目、pod项目都有)|fb966|选择每个|71vng|目标|es4fc|一个接一个|3cips|设置|22bup|构建活动架构|5sgu3|至|k48n|没有|4kgts|对于每个目标|99to8|最后，清理并重新构建您的项目。^0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|1|1|0|0|0|0|0|0|0|0|0|0|0|0|0|0^^$0|$1|$2|3|4|5|6|$7|8|9|-4]]|A|$2|3|4|5|6|$7|B|9|-4]]]|C|@$D|E|F|G|2|H|I|2N|J|@]|K|@]|6|$]]|$D|L|F|M|2|H|I|2O|J|@]|K|@]|6|$]]|$D|N|F|O|2|H|I|2P|J|@]|K|@]|6|$]]|$D|P|F|Q|2|H|I|2Q|J|@]|K|@]|6|$]]|$D|R|F|S|2|H|I|2R|J|@]|K|@]|6|$]]|$D|T|F|U|2|H|I|2S|J|@]|K|@]|6|$]]|$D|V|F|W|2|H|I|2T|J|@]|K|@]|6|$]]|$D|X|F|Y|2|H|I|2U|J|@]|K|@]|6|$]]|$D|Z|F|10|2|H|I|2V|J|@]|K|@]|6|$]]|$D|11|F|-4|2|H|I|2W|J|@]|K|@]|6|$]]|$D|12|F|13|2|H|I|2X|J|@]|K|@]|6|$]]|$D|14|F|15|2|H|I|2Y|J|@]|K|@]|6|$]]|$D|16|F|17|2|H|I|2Z|J|@]|K|@]|6|$]]|$D|18|F|19|2|H|I|30|J|@]|K|@]|6|$]]|$D|1A|F|1B|2|H|I|31|J|@]|K|@]|6|$]]|$D|1C|F|1D|2|H|I|32|J|@]|K|@]|6|$]]|$D|1E|F|-4|2|H|I|33|J|@]|K|@]|6|$]]|$D|1F|F|1G|2|H|I|34|J|@]|K|@]|6|$]]|$D|1H|F|1I|2|H|I|35|J|@]|K|@]|6|$]]|$D|1J|F|-4|2|H|I|36|J|@]|K|@]|6|$]]|$D|1K|F|-4|2|H|I|37|J|@]|K|@]|6|$]]|$D|1L|F|1M|2|1N|I|38|J|@]|K|@$1O|39|1P|3A|D|3B]]|6|$]]|$D|1Q|F|-4|2|H|I|3C|J|@]|K|@]|6|$]]|$D|1R|F|1S|2|H|I|3D|J|@]|K|@]|6|$]]|$D|1T|F|1U|2|H|I|3E|J|@]|K|@]|6|$]]|$D|1V|F|-4|2|H|I|3F|J|@]|K|@]|6|$]]|$D|1W|F|-4|2|H|I|3G|J|@]|K|@]|6|$]]|$D|1X|F|1M|2|1N|I|3H|J|@]|K|@$1O|3I|1P|3J|D|3K]]|6|$]]|$D|1Y|F|-4|2|H|I|3L|J|@]|K|@]|6|$]]|$D|1Z|F|1S|2|H|I|3M|J|@]|K|@]|6|$]]|$D|20|F|21|2|H|I|3N|J|@]|K|@]|6|$]]|$D|22|F|1D|2|H|I|3O|J|@]|K|@]|6|$]]|$D|23|F|24|2|H|I|3P|J|@]|K|@]|6|$]]|$D|25|F|26|2|H|I|3Q|J|@]|K|@]|6|$]]|$D|27|F|28|2|H|I|3R|J|@]|K|@]|6|$]]|$D|29|F|2A|2|H|I|3S|J|@]|K|@]|6|$]]|$D|2B|F|2C|2|H|I|3T|J|@]|K|@]|6|$]]|$D|2D|F|2E|2|H|I|3U|J|@]|K|@]|6|$]]|$D|2F|F|2G|2|H|I|3V|J|@]|K|@]|6|$]]|$D|2H|F|2I|2|H|I|3W|J|@]|K|@]|6|$]]|$D|2J|F|2K|2|H|I|3X|J|@]|K|@]|6|$]]|$D|2L|F|2M|2|H|I|3Y|J|@]|K|@]|6|$]]]]

Framework Not Found

When using Pods, we usually face this issue.

There are two main reasons for this 

<ol>
<li>When we open the .xcodeproj file instead of .xcworkspace as mentioned by izaaz-yunus in this <a href="https://stackoverflow.com/a/40373045/2024878">Answer</a>
 
 </li>
<li>When Build Active Architecture Only is set to Yes in Build Settings 

This applies to the projects target and also to all the targets in the pod project</li>
</ol>

Main Project Screenshot
 <a href="https://i.stack.imgur.com/LRxm7.png" rel="noreferrer"><img src="https://i.stack.imgur.com/LRxm7.png" alt="Set Build Active Architecture Only to No"></a>

Pod Project Screenshot
 <a href="https://i.stack.imgur.com/VT86F.png" rel="noreferrer"><img src="https://i.stack.imgur.com/VT86F.png" alt="enter image description here"></a>

<ol>
<li>Select Build Settings (of main project, pod project both)</li>
<li>Select each Target one by one </li>
<li>Set Build Active Architectures to No for each target</li>
</ol>

Finally clean and rebuild your project.

entityMap|blocks|key|6bf6v|text|在项目目标中打开your-project.xcworkspace。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|882ad|1)打开终端->+2)+$cd+/project|6ddsr|_|4lte3|destination+->+3)+$open+-project.xcworkspace|91o3e|或者直接在finder中打开文件^0|0|0|0|0^^$0|$]|1|@$2|3|4|5|6|7|8|K|9|@]|A|@]|B|$]]|$2|C|4|D|6|7|8|L|9|@]|A|@]|B|$]]|$2|E|4|F|6|7|8|M|9|@]|A|@]|B|$]]|$2|G|4|H|6|7|8|N|9|@]|A|@]|B|$]]|$2|I|4|J|6|7|8|O|9|@]|A|@]|B|$]]]]

Open the your-project.xcworkspace in your project destination. 

1)Open terminal -> 2) $cd /project_destination -> 3) $open your-project.xcworkspace

or just open the file in finder

entityMap|blocks|key|fhair|text|its+work's
1.+select+your+project+in+directories
2.+select+General
3.+Add+"GoogleToolboxForMac.framework"+to+the+Linked+"frameworks+and+Libraries"|type|code-block|depth|inlineStyleRanges|entityRanges|data|syntax|javascript^0^^$0|$]|1|@$2|3|4|5|6|7|8|E|9|@]|A|@]|B|$C|D]]]]

<pre>
its work's
1. select your project in directories
2. select General
3. Add "GoogleToolboxForMac.framework" to the Linked "frameworks and Libraries"
</pre>

entityMap|blocks|key|f3ubf|text|确保您的项目目标和pod的“构建活动架构设置”是相同的。在这两种情况下设置NO都解决了我的问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data^0^^$0|$]|1|@$2|3|4|5|6|7|8|C|9|@]|A|@]|B|$]]]]

Make sure your "Build Active Architecture settings" for both your project target and the pod are same. Setting NO in both these cases fixed my issue.

entityMap|blocks|key|1k8gp|text|当我试图在我的设备上运行它时，我也遇到了同样的问题。在模拟器上，它工作得很好。我尝试了上面的一些方法，但对我来说不起作用。我检查了我正在做的|type|unstyled|depth|inlineStyleRanges|entityRanges|data|deipu|而不是|9chc|文件，所以我尝试了这个。请按照以下步骤执行以下操作：|err9i|使用.xc打开Xcode项目(cocoapods项目)...文件。|3ndjb|在项目导航器中选择Pods项目(左侧的蓝色图标)。|3u7d|在Targets下，确保选中Pods-ProjectName+(蓝色图标)。|c3o9c|导航到“生成设置”，并设置要在其上运行项目的iOS版本的iOS部署目标。|au80f|注意:它与您在中设置的内容相同|elmnj|..。|cglbf|也许有人会从中受益。^0|0|0|0|0|0|0|0|0|0^^$0|$]|1|@$2|3|4|5|6|7|8|U|9|@]|A|@]|B|$]]|$2|C|4|D|6|7|8|V|9|@]|A|@]|B|$]]|$2|E|4|F|6|7|8|W|9|@]|A|@]|B|$]]|$2|G|4|H|6|7|8|X|9|@]|A|@]|B|$]]|$2|I|4|J|6|7|8|Y|9|@]|A|@]|B|$]]|$2|K|4|L|6|7|8|Z|9|@]|A|@]|B|$]]|$2|M|4|N|6|7|8|10|9|@]|A|@]|B|$]]|$2|O|4|P|6|7|8|11|9|@]|A|@]|B|$]]|$2|Q|4|R|6|7|8|12|9|@]|A|@]|B|$]]|$2|S|4|T|6|7|8|13|9|@]|A|@]|B|$]]]]

I had the same issue when I tried to run it on my device. On the simulator it was working fine. I tried some of the above but it didn't work for me. I checked that I was working on <code>.xcworkspace</code> instead of <code>.xcodeproj</code> file, so I tried this one. Follow these steps to:

<ol>
<li>Open Xcode project (cocoapods project) using .xc... file.</li>
<li>Select Pods project in the project navigator (blue icon on left).</li>
<li>Under Targets, ensure Pods-ProjectName (blue icon) is selected.</li>
<li>Navigate to Build Settings and set the iOS Deployment Target on which iOS version you are going to run project.</li>
</ol>

Note:It is same as what you set in <code>Project-&gt;Targets-&gt;Deployment info-&gt;Deployment Target</code>.

Maybe someone get benefitted from this.

entityMap|blocks|key|1tt34|text|请访问：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|7f13n|并构建项目。^0|0^^$0|$]|1|@$2|3|4|5|6|7|8|E|9|@]|A|@]|B|$]]|$2|C|4|D|6|7|8|F|9|@]|A|@]|B|$]]]]

Go to : <code>target -&gt; Build Settings -&gt; Other Linker Flags -&gt; remove framework "GoogleToolboxforMAC"</code> and build the project.

entityMap|blocks|key|eo1tl|text|我的问题是，我有一个/bin/sh脚本，它复制了不存在的特定Pod。这是其中之一。删除脚本解决了生成问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data^0^^$0|$]|1|@$2|3|4|5|6|7|8|C|9|@]|A|@]|B|$]]]]

My issue was that I had a /bin/sh script that copied specific Pods which didn't exist. This was one of them. Removing the script resolved the build issue.

entityMap|blocks|key|albai|text|在硬盘驱动器中搜索GoogleToolboxForMac文件，可在以下位置找到:+/Users/Marco/Documents/iosapps/BomRetiro/Bom+Retiro/Pod/Target+Support+files|type|unstyled|depth|inlineStyleRanges|entityRanges|data|e47e5|然后我将文件复制到这个文件夹:+/Users/YourHomeFolder/Library/Developer/Xcode/DerivedData/Bom|89tbs|_|8jrs8|Retiro-bsfjbazzzuwmuidqurdmjvdtnnsb/Build/Products|6i5rn|然后对我来说，解决的问题是使用.xcworkspace文件打开项目。^0|0|0|0|0^^$0|$]|1|@$2|3|4|5|6|7|8|K|9|@]|A|@]|B|$]]|$2|C|4|D|6|7|8|L|9|@]|A|@]|B|$]]|$2|E|4|F|6|7|8|M|9|@]|A|@]|B|$]]|$2|G|4|H|6|7|8|N|9|@]|A|@]|B|$]]|$2|I|4|J|6|7|8|O|9|@]|A|@]|B|$]]]]

-I search in harddrive for the GoogleToolboxForMac files, found in :
 /Users/Marco/Documents/iosapps/BomRetiro/Bom Retiro/Pods/Target Support Files

<ul>
<li>And then i copied the files to this folder : 
/Users/YourHomeFolder/Library/Developer/Xcode/DerivedData/Bom_Retiro-bsfjbazzzuwmuidqurdmjvdtnnsb/Build/Products</li>
</ul>

And then for me is resolved opening the project usinf .xcworkspace file.

entityMap|0|type|IMAGE|mutability|IMMUTABLE|data|imageUrl|https://ask.qcloudimg.com/http-save/actteam/38a17b24babbddee0116a2bc7d14f4cf.png|imageAlt|blocks|key|2oc6t|text|如果您在XCode中遇到相同的错误，请转到：|unstyled|depth|inlineStyleRanges|entityRanges|9k6pi|你的项目|58u4s|>|7h7p5|你的目标|8hu2|>向下滚动到|f0r7t|链接的框架和库|c9c35|并检查Library条目是否变暗：|6h7sq|​|frkuv|d1fjr|?|atomic|offset|length|9redc|8vue3|fism5|如果是，请删除并重新添加。在我的例子中，我有重复的条目，其中一个是灰显的(当XCode在磁盘上找不到它们时)。^0|0|0|0|0|0|0|0|0|0|0|1|0|0|0|0^^$0|$1|$2|3|4|5|6|$7|8|9|-4]]]|A|@$B|C|D|E|2|F|G|17|H|@]|I|@]|6|$]]|$B|J|D|K|2|F|G|18|H|@]|I|@]|6|$]]|$B|L|D|M|2|F|G|19|H|@]|I|@]|6|$]]|$B|N|D|O|2|F|G|1A|H|@]|I|@]|6|$]]|$B|P|D|Q|2|F|G|1B|H|@]|I|@]|6|$]]|$B|R|D|S|2|F|G|1C|H|@]|I|@]|6|$]]|$B|T|D|U|2|F|G|1D|H|@]|I|@]|6|$]]|$B|V|D|W|2|F|G|1E|H|@]|I|@]|6|$]]|$B|X|D|-4|2|F|G|1F|H|@]|I|@]|6|$]]|$B|Y|D|Z|2|10|G|1G|H|@]|I|@$11|1H|12|1I|B|1J]]|6|$]]|$B|13|D|-4|2|F|G|1K|H|@]|I|@]|6|$]]|$B|14|D|W|2|F|G|1L|H|@]|I|@]|6|$]]|$B|15|D|16|2|F|G|1M|H|@]|I|@]|6|$]]]]

If you're facing the same error, in your XCode, go to:

Your Project > your target > Scroll down to Linked Framework and Libraries and check if the Library entry is dimmed:

<a href="https://i.stack.imgur.com/Igago.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/Igago.png" alt="XCode Linked Framework and Libraries screenshot"></a>

If so, remove and add it again. In my case, I had duplicated entries and one of them was dimmed (when XCode can't find them on disk).

entityMap|blocks|key|citpl|text|Swift+5简单答案|type|unstyled|depth|inlineStyleRanges|entityRanges|data|9sj88|Shift%2BAlt%2BCmd%2BK++//Clean+the+project+and+Run+again!+
//if+not+work+restart+Xcode+and+again+clean+it+
//Its+will+work+happy+coding|code-block|syntax|javascript^0|0^^$0|$]|1|@$2|3|4|5|6|7|8|H|9|@]|A|@]|B|$]]|$2|C|4|D|6|E|8|I|9|@]|A|@]|B|$F|G]]]]

Swift 5 Simple Answer

<pre><code>Shift+Alt+Cmd+K //Clean the project and Run again! 
//if not work restart Xcode and again clean it 
//Its will work happy coding
</code></pre>

entityMap|blocks|key|a0n7r|text|对于那些在经历了这一切之后仍然有问题的人。我正在做一个科尔多瓦项目，在升级到XCode+11.5之后，这个问题突然出现了。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|6j06a|最后，我能够通过打开项目根目录中的库文件并删除属于"FirebaseMessaging“的”pods.json“中的条目来解决这个问题。我们没有使用它，我不知道它是怎么做到的。此外，我已经将"Build+Setting“->+"Build+Active+Architecture+Only”更改为"No“。|6avq|然后，我再次打开.xcworkspace文件，构建遍历了整个过程。^0|0|0^^$0|$]|1|@$2|3|4|5|6|7|8|G|9|@]|A|@]|B|$]]|$2|C|4|D|6|7|8|H|9|@]|A|@]|B|$]]|$2|E|4|F|6|7|8|I|9|@]|A|@]|B|$]]]]

For those still having issues after all this.
I am working on a cordova project and the issue suddenly appeared after upgrading to XCode 11.5.
Finally I was able to solve it by opening the pods.json file in the project root and remove the entry in &quot;libraries&quot; which belongs to &quot;FirebaseMessaging&quot;.
We were not using that and I dont know how it got there.
Additionally I have changed the &quot;Build Setting&quot; -&gt; &quot;Build Active Architecture Only&quot; to &quot;No&quot; everywhere.
Afterwards I opened the .xcworkspace file again and the build ran through.

entityMap|blocks|key|9icub|text|有效的解决方案是|type|unstyled|depth|inlineStyleRanges|entityRanges|data|dm7cq|搜索|366em|在xcodeproj中|f9n4o|从生成配置中移除所有引用^0|0|0|0^^$0|$]|1|@$2|3|4|5|6|7|8|I|9|@]|A|@]|B|$]]|$2|C|4|D|6|7|8|J|9|@]|A|@]|B|$]]|$2|E|4|F|6|7|8|K|9|@]|A|@]|B|$]]|$2|G|4|H|6|7|8|L|9|@]|A|@]|B|$]]]]

Worked solution is
<ul>
<li>Search <code>GoogleToolboxForMa</code> in xcodeproj</li>
<li>Remove all references from the build configurations</li>
</ul>

After I update my Firebase via "pod update", I got error like this :

<pre><code>ld: warning: directory not found for option '-F/Users/bennysantoso/Library/Developer/Xcode/DerivedData/FCM-atfcxuircoryufazlomgwfgmvaqm/Build/Products/Debug-iphonesimulator/GoogleToolboxForMac'
ld: framework not found GoogleToolboxForMac
clang: error: linker command failed with exit code 1 (use -v to see invocation)
</code></pre>

Here my Podfile :

<pre><code># Uncomment this line to define a global platform for your project
# platform :ios, '9.0'
pod 'Firebase/Core'
pod 'Firebase/Messaging'

target 'BB' do
 # Comment this line if you're not using Swift and don't want to use dynamic frameworks
 use_frameworks!

 # Pods for BB

 target 'BBTests' do
 inherit! :search_paths
 # Pods for testing
 end

 target 'BBUITests' do
 inherit! :search_paths
 # Pods for testing
 end

end
</code></pre>

Does anybody know about this error?

I seek out relationships GoogleToolboxForMac and Firebase, but I just get a little bit of information.

FYI, I use Swift 2.3 and Firebase 3.8.0.

I will be grateful for any help you can provide. Thanks!

Framework not found GoogleToolboxForMac

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

 在我通过"pod update“更新我的Firebase后，我得到了这样的错误： ld: warning: directory not found for option '-F/Users/bennysantoso/Library/Developer/Xcode/DerivedData/FCM-atfcxuircor...

问找不到框架GoogleToolboxForMac
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问找不到框架GoogleToolboxForMacEN