entityMap|blocks|key|a5qt6|text|请与您为安装的AWS+CLI配置的AWS区域进行核对。AWS+EKS仅在美国东部(弗吉尼亚州北部)和美国西部(俄勒冈州)提供。请务必对其进行正确检查，并为AWS+CLI进行相同的配置。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|cimm^0|0^^$0|$]|1|@$2|3|4|5|6|7|8|D|9|@]|A|@]|B|$]]|$2|C|4|-4|6|7|8|E|9|@]|A|@]|B|$]]]]

Please check with the AWS region you configured for the AWS CLI you installed.
AWS EKS is available only on US East (N. Virginia) and US West (Oregon).
Do check it properly and configure the same for AWS CLI.

entityMap|blocks|key|b24jk|text|我正在尝试从不同的aws配置文件连接到群集。因此，理想情况下，我们应该使用相同的IAM配置文件从本地运行kubectl，这样heptio-authenticator-aws就会满意。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1rqlk^0|0^^$0|$]|1|@$2|3|4|5|6|7|8|D|9|@]|A|@]|B|$]]|$2|C|4|-4|6|7|8|E|9|@]|A|@]|B|$]]]]

I was trying to connect to the cluster from a diff aws profile. So ideally we should use the same IAM profile for running kubectl from local so that the heptio-authenticator-aws will be happy.

entityMap|0|type|LINK|mutability|MUTABLE|data|url|https://github.com/aws/aws-cli#installation|blocks|key|dr7at|text|我在El+Capitan+10.11.6上也遇到了同样的问题，唯一有效的解决方案是：|unstyled|depth|inlineStyleRanges|entityRanges|960b3|sudo+pip+install+awscli+--ignore-installed+six|offset|length|style|CODE|25nk8|版本6在El+Capitan中提供了distutils|alpiu|参考：https://github.com/aws/aws-cli#installation|30eg7^0|0|0|1A|0|0|3|17|0|0^^$0|$1|$2|3|4|5|6|$7|8]]]|9|@$A|B|C|D|2|E|F|T|G|@]|H|@]|6|$]]|$A|I|C|J|2|E|F|U|G|@$K|V|L|W|M|N]]|H|@]|6|$]]|$A|O|C|P|2|E|F|X|G|@]|H|@]|6|$]]|$A|Q|C|R|2|E|F|Y|G|@]|H|@$K|Z|L|10|A|11]]|6|$]]|$A|S|C|-4|2|E|F|12|G|@]|H|@]|6|$]]]]

I had the same issue on El Capitan 10.11.6 and the only one worked solution was this:

<code>sudo pip install awscli --ignore-installed six</code>

Version 6 comes with distutils in El Capitan

Reference: <a href="https://github.com/aws/aws-cli#installation" rel="noreferrer">https://github.com/aws/aws-cli#installation</a>

entityMap|0|type|LINK|mutability|MUTABLE|data|url|https://github.com/awslabs/amazon-eks-ami/issues/14|1|https://docs.aws.amazon.com/cli/latest/userguide/installing.html|2|https://docs.aws.amazon.com/cli/latest/userguide/awscli-install-linux.html#awscli-install-linux-path|blocks|key|6f7ut|text|上面提到的解决方案并没有解决我的问题--+this+link帮助我解决了这个问题。|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|eerms|aws+--version|code-block|syntax|javascript|ao7r1|显示的版本不是最新版本。EKS是在1.15.32版本中引入的--这意味着我的版本根本不知道EKS。卸载和重新安装也不起作用，路径指的是以前在其他地方安装的旧版本。该解决方案遵循的是安装说明here，然后是updating+the+path+variable|1l86q|在aws+--version命令显示低于1.15.32的任何版本之前，无法解决此问题。|style|CODE|b0132|其他解决方案可能是之后需要的额外修复，但它们也不能与早期版本一起工作。|pttf^0|L|9|0|0|0|2M|4|1|2U|Q|2|0|1|D|0|0^^$0|$1|$2|3|4|5|6|$7|8]]|9|$2|3|4|5|6|$7|A]]|B|$2|3|4|5|6|$7|C]]]|D|@$E|F|G|H|2|I|J|12|K|@]|L|@$M|13|N|14|E|15]]|6|$]]|$E|O|G|P|2|Q|J|16|K|@]|L|@]|6|$R|S]]|$E|T|G|U|2|I|J|17|K|@]|L|@$M|18|N|19|E|1A]|$M|1B|N|1C|E|1D]]|6|$]]|$E|V|G|W|2|I|J|1E|K|@$M|1F|N|1G|X|Y]]|L|@]|6|$]]|$E|Z|G|10|2|I|J|1H|K|@]|L|@]|6|$]]|$E|11|G|-4|2|I|J|1I|K|@]|L|@]|6|$]]]]

Solutions mentioned did not resolve my issue - <a href="https://github.com/awslabs/amazon-eks-ami/issues/14" rel="nofollow noreferrer">this link</a> helped me out in figuring the issue. 

<pre><code>aws --version
</code></pre>

displayed a version which was not the latest. EKS was introduced with version 1.15.32 - which means my version did not know EKS at all. Uninstalling and reinstalling did not work either, path was referring to some older version previously installed somewhere else. The solution was following installation instructions <a href="https://docs.aws.amazon.com/cli/latest/userguide/installing.html" rel="nofollow noreferrer">here</a> followed by <a href="https://docs.aws.amazon.com/cli/latest/userguide/awscli-install-linux.html#awscli-install-linux-path" rel="nofollow noreferrer">updating the path variable</a>

the issue cannot be resolved until the 
<code>aws --version</code> command shows you any version less than 1.15.32.

The other solutions may be additional fixes needed afterwards, yet they will not work with an earlier version either.

entityMap|0|type|LINK|mutability|MUTABLE|data|url|https://docs.aws.amazon.com/cli/latest/userguide/install-linux-al2017.html|blocks|key|7g6d6|text|我遇到了同样的问题，因为我当前的aws+cli版本太旧了(如下所示)|unstyled|depth|inlineStyleRanges|entityRanges|e16bt|$aws+--version
aws-cli/1.14.44+Python/3.6.8+Linux/4.15.0-58-generic+botocore/1.8.4|code-block|syntax|javascript|dmqc3|升级awscli版本有助于解决此问题|88jkg|$pip3+install+--upgrade+--user+awscli
$aws+--version
aws-cli/1.16.252+Python/3.6.8+Linux/4.15.0-58-generic+botocore/1.12.242|4t4ph|这里是升级awscli+https://docs.aws.amazon.com/cli/latest/userguide/install-linux-al2017.html的链接|offset|length|b4jct^0|0|0|0|0|C|22|0|0^^$0|$1|$2|3|4|5|6|$7|8]]]|9|@$A|B|C|D|2|E|F|W|G|@]|H|@]|6|$]]|$A|I|C|J|2|K|F|X|G|@]|H|@]|6|$L|M]]|$A|N|C|O|2|E|F|Y|G|@]|H|@]|6|$]]|$A|P|C|Q|2|K|F|Z|G|@]|H|@]|6|$L|M]]|$A|R|C|S|2|E|F|10|G|@]|H|@$T|11|U|12|A|13]]|6|$]]|$A|V|C|-4|2|E|F|14|G|@]|H|@]|6|$]]]]

I faced the same issue because my current aws cli version was old (as shown below) 

<pre><code>$aws --version
aws-cli/1.14.44 Python/3.6.8 Linux/4.15.0-58-generic botocore/1.8.4
</code></pre>

Upgrading the awscli version helped to resolve the issue

<pre><code>$pip3 install --upgrade --user awscli
$aws --version
aws-cli/1.16.252 Python/3.6.8 Linux/4.15.0-58-generic botocore/1.12.242
</code></pre>

Here is the link to upgrade awscli 
<a href="https://docs.aws.amazon.com/cli/latest/userguide/install-linux-al2017.html" rel="nofollow noreferrer">https://docs.aws.amazon.com/cli/latest/userguide/install-linux-al2017.html</a>

entityMap|blocks|key|ehfaq|text|当我们使用apt包安装aws-cli时，会发生这种情况，如下所示。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|8i37t|sudo+apt-get+install+awscli|code-block|syntax|javascript|93b80|因为默认情况下，它将安装1.14+aws-cli版本。因此，我的建议是使用pip3在您的机器上安装aws-cli。它总是安装最新的aws-cli版本。|5iivj|pip3+install+--upgrade+--user+awscli|2je70^0|B|7|0|0|H|7|1D|7|1T|7|0|0^^$0|$]|1|@$2|3|4|5|6|7|8|Q|9|@$A|R|B|S|C|D]]|E|@]|F|$]]|$2|G|4|H|6|I|8|T|9|@]|E|@]|F|$J|K]]|$2|L|4|M|6|7|8|U|9|@$A|V|B|W|C|D]|$A|X|B|Y|C|D]|$A|Z|B|10|C|D]]|E|@]|F|$]]|$2|N|4|O|6|I|8|11|9|@]|E|@]|F|$J|K]]|$2|P|4|-4|6|7|8|12|9|@]|E|@]|F|$]]]]

This happens when we install <code>aws-cli</code> using apt packages as below.

<pre><code>sudo apt-get install awscli
</code></pre>

because by default it will install 1.14 <code>aws-cli</code> version. Therefore my recommendation is to use pip3 to install <code>aws-cli</code> to your machine. It always installs the latest <code>aws-cli</code> version.

<pre><code>pip3 install --upgrade --user awscli
</code></pre>

entityMap|blocks|key|85gtv|text|所有这些对你来说都不起作用|type|unstyled|depth|inlineStyleRanges|entityRanges|data|nm8f|pip+uninstall+awscli+

sudo+rm+-rf+/usr/local/aws

pip3+install+awscli+--upgrade+--user++++++|code-block|syntax|javascript|dadjt|aws+--版本aws-cli/1.18.39+Python/3.6.9+Linux/4.15.0-1065-aws+botocore/1.15.39|7fr1d|如果这是旧版本(aws-cli/1.18.39)，那么它将不适用于您|2adm4^0|0|0|0|0^^$0|$]|1|@$2|3|4|5|6|7|8|M|9|@]|A|@]|B|$]]|$2|C|4|D|6|E|8|N|9|@]|A|@]|B|$F|G]]|$2|H|4|I|6|7|8|O|9|@]|A|@]|B|$]]|$2|J|4|K|6|7|8|P|9|@]|A|@]|B|$]]|$2|L|4|-4|6|7|8|Q|9|@]|A|@]|B|$]]]]

All this not worked for you then 

<pre><code>pip uninstall awscli 

sudo rm -rf /usr/local/aws

pip3 install awscli --upgrade --user 
</code></pre>

aws --version
aws-cli/1.18.39 Python/3.6.9 Linux/4.15.0-1065-aws botocore/1.15.39

if this is older version(aws-cli/1.18.39) then it won't work for you

I have installed the AWS CLI around 6 moths back and upgraded using the following command today.

<code>pip install --upgrade awscli</code>

The current version on my Ubuntu 18.04 machine is:

<pre><code>aws-cli/1.14.44 Python/3.6.5 Linux/4.15.0-23-generic botocore/1.8.48
</code></pre>

When I try aws eks command, I am getting the following error:

<pre><code>Invalid choice: 'eks', maybe you meant:
 * es 
</code></pre>

Is my aws cli is upgraded properly or should I install something else for EKS service?

eks option is not available in AWS CLI. How to install it?

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

 我已经在大约6个月前安装了AWS CLI，并在今天使用以下命令进行了升级。 pip install --upgrade awscli 我的Ubuntu 18.04机器上的当前版本是： aws-cli/1.14.44 Python/3.6.5 Linux/4.15.0-23-generic botocore/1.8.4...

问eks选项在AWS CLI中不可用。如何安装？
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问eks选项在AWS CLI中不可用。如何安装？EN