blocks|key|4673491|text|上面的这些都没有帮到我，但这件事帮了我：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4673492|npm+config+rm+proxy
npm+config+rm+https-proxy|code-block|syntax|javascript|4673493|来源：http://jonathanblog2000.blogspot.ch/2013/11/set-and-reset-proxy-for-git-and-npm.html|offset|length|4673494|entityMap|0|LINK|mutability|MUTABLE|url|http://jonathanblog2000.blogspot.ch/2013/11/set-and-reset-proxy-for-git-and-npm.html^0|0|0|3|2C|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|T|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|U|8|@]|9|@$I|V|J|W|1|X]]|A|$]]|$1|K|3|-4|5|6|7|Y|8|@]|9|@]|A|$]]]|L|$M|$5|N|O|P|A|$Q|R]]]]

None of the above helped me, but this did: 

<pre><code>npm config rm proxy
npm config rm https-proxy
</code></pre>

Source: <a href="http://jonathanblog2000.blogspot.ch/2013/11/set-and-reset-proxy-for-git-and-npm.html">http://jonathanblog2000.blogspot.ch/2013/11/set-and-reset-proxy-for-git-and-npm.html</a>

blocks|key|4673353|text|尝试使用以下命令删除它们：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4673354|npm+config+delete+proxy
npm+config+delete+https-proxy|code-block|syntax|javascript|4673355|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

Try deleting them with:

<pre><code>npm config delete proxy
npm config delete https-proxy
</code></pre>

blocks|key|167644|text|npm+config+rm+proxy
npm+config+rm+https-proxy
unset+HTTP_PROXY
unset+HTTPS_PROXY
unset+http_proxy
unset+https_proxy|type|code-block|depth|inlineStyleRanges|entityRanges|data|syntax|javascript|167645|该死的，终于在安装了privoxy+(ad+remover)的Debian+Jessie中成功了，谢谢你:-)|unstyled|167646|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$B|C]]|$1|D|3|E|5|F|7|J|8|@]|9|@]|A|$]]|$1|G|3|-4|5|F|7|K|8|@]|9|@]|A|$]]]|H|$]]

<pre><code>npm config rm proxy
npm config rm https-proxy
unset HTTP_PROXY
unset HTTPS_PROXY
unset http_proxy
unset https_proxy
</code></pre>

Damn finally this does the trick in Debian Jessie with privoxy (ad remover) installed, Thank you :-)

blocks|key|4674110|text|在最新版本中，npm+rm+proxy不起作用。请改用npm+rm+http-proxy|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|4674111|npm+config+rm+proxy++npm+config+rm+https-proxy|4674112|entityMap^0|7|C|R|H|0|0|1A|0^^$0|@$1|2|3|4|5|6|7|J|8|@$9|K|A|L|B|C]|$9|M|A|N|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|O|8|@$9|P|A|Q|B|C]]|D|@]|E|$]]|$1|H|3|-4|5|6|7|R|8|@]|D|@]|E|$]]]|I|$]]

In the latest version <code>npm rm proxy</code> does not work. Instead use <code>npm rm http-proxy</code>

<code>npm config rm proxy
 npm config rm https-proxy</code>

blocks|key|4673454|text|默认情况下，npm从https://registry.npmjs.org中查找包。您还需要覆盖registry和strict-ssl的值。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|4673455|npm+config+set+registry+"http://registry.npmjs.org"
npm+config+set+strict-ssl+false|code-block|syntax|javascript|4673456|entityMap^0|6|3|A|Q|1B|8|1K|A|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@$9|N|A|O|B|C]|$9|P|A|Q|B|C]|$9|R|A|S|B|C]|$9|T|A|U|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|V|8|@]|D|@]|E|$I|J]]|$1|K|3|-4|5|6|7|W|8|@]|D|@]|E|$]]]|L|$]]

By the default value <code>npm</code> is looking for packages from <code>https://registry.npmjs.org</code>. What you also need to do is override the <code>registry</code> and <code>strict-ssl</code> values.

<pre><code>npm config set registry "http://registry.npmjs.org"
npm config set strict-ssl false
</code></pre>

blocks|key|168068|text|我使用了以下命令来删除任何代理集：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|168069|++++npm+config+rm+proxy
++++npm+config+rm+https-proxy|code-block|syntax|javascript|168070|它解决了我的问题:)|168071|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

I have used the below commands for removing any proxy set:

<pre><code> npm config rm proxy
 npm config rm https-proxy
</code></pre>

And it solved my problem :)

blocks|key|4673829|text|有一种删除或移除npm代理的简单方法。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4673830|npm+config+delete+proxy
npm+config+delete+https-proxy|code-block|syntax|javascript|4673831|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

there is a simple way of deleting or removing the npm proxies. 

<pre><code>npm config delete proxy
npm config delete https-proxy
</code></pre>

blocks|key|4673932|text|我曾经遇到过同样的问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4673933|按照以下步骤删除代理值：|4673934|1.要在npm中删除代理：|4673935|(-g很重要)|4673936|npm+config+delete+proxy+-g|offset|length|style|CODE|4673937|npm+config+delete+http-proxy+-g|4673938|npm+config+delete+https-proxy+-g|4673939|使用以下命令检查npm配置文件：|4673940|npm+config+list|4673941|2.删除系统代理：set+HTTP_PROXY=null+set+HTTPS_PROXY=null|4673942|现在关闭命令行并打开它以刷新变量(代理)。|4673943|entityMap^0|0|0|0|0|0|Q|0|0|V|0|0|W|0|0|0|F|0|9|J|T|K|0|0^^$0|@$1|2|3|4|5|6|7|11|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|12|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|13|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|14|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|15|8|@$J|16|K|17|L|M]]|9|@]|A|$]]|$1|N|3|O|5|6|7|18|8|@$J|19|K|1A|L|M]]|9|@]|A|$]]|$1|P|3|Q|5|6|7|1B|8|@$J|1C|K|1D|L|M]]|9|@]|A|$]]|$1|R|3|S|5|6|7|1E|8|@]|9|@]|A|$]]|$1|T|3|U|5|6|7|1F|8|@$J|1G|K|1H|L|M]]|9|@]|A|$]]|$1|V|3|W|5|6|7|1I|8|@$J|1J|K|1K|L|M]|$J|1L|K|1M|L|M]]|9|@]|A|$]]|$1|X|3|Y|5|6|7|1N|8|@]|9|@]|A|$]]|$1|Z|3|-4|5|6|7|1O|8|@]|9|@]|A|$]]]|10|$]]

I had the same problem once. 
Follow these steps to delete proxy values: 
 
1.To delete proxy in npm: 
(-g is Important) 
<code>npm config delete proxy -g</code> 
<code>npm config delete http-proxy -g</code> 
<code>npm config delete https-proxy -g</code> 
 
Check the npm config file using: 
<code>npm config list</code>

2.To delete system proxy:
<code>set HTTP_PROXY=null</code> 
<code>set HTTPS_PROXY=null</code>

Now close the command line and open it to refresh the variables(proxy).

blocks|key|4673807|text|以上这些对我来说都不起作用。我必须编辑文件".npmrc“，该文件将位于用户主目录下(例如:+c:\users\abcuser)：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4673808|http_proxy=null
registry=https://registry.npmjs.org/
strict-ssl=true
proxy=null|code-block|syntax|javascript|4673809|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

Nothing above worked for me. I had to edit the file ".npmrc" which will be under user home directory (ex: c:\users\abcuser) :

<pre><code>http_proxy=null
registry=https://registry.npmjs.org/
strict-ssl=true
proxy=null
</code></pre>

blocks|key|4673694|text|在Windows7中运行npm版本2.10.1时，我使用：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4673695|npm+config+delete+proxy
npm+config+delete+https-proxy|code-block|syntax|javascript|4673696|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

Running npm version 2.10.1 in windows 7, I used:

<pre><code>npm config delete proxy
npm config delete https-proxy
</code></pre>

blocks|key|167829|text|这是可行的|type|unstyled|depth|inlineStyleRanges|entityRanges|data|167830|npm+config+delete+http-proxy
npm+config+delete+https-proxy

npm+config+rm+proxy
npm+config+rm+https-proxy

set+HTTP_PROXY=null
set+HTTPS_PROXY=null|code-block|syntax|javascript|167831|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

This works 

<pre><code>npm config delete http-proxy
npm config delete https-proxy

npm config rm proxy
npm config rm https-proxy

set HTTP_PROXY=null
set HTTPS_PROXY=null
</code></pre>

blocks|key|168322|text|尝尝这个,|type|unstyled|depth|inlineStyleRanges|entityRanges|data|168323|npm配置删除http-proxy|168324|npm+config+delete+https-proxy|168325|npm配置rm代理|168326|npm配置rm+https-代理|168327|设置HTTP_PROXY=null|168328|设置HTTPS_PROXY=null|168329|entityMap^0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|P|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|Q|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|R|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|S|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|T|8|@]|9|@]|A|$]]|$1|J|3|K|5|6|7|U|8|@]|9|@]|A|$]]|$1|L|3|M|5|6|7|V|8|@]|9|@]|A|$]]|$1|N|3|-4|5|6|7|W|8|@]|9|@]|A|$]]]|O|$]]

Try This,

npm config delete http-proxy

npm config delete https-proxy

npm config rm proxy

npm config rm https-proxy

set HTTP_PROXY=null

set HTTPS_PROXY=null

blocks|key|167733|text|npm+config+delete+proxy+-g|type|code-block|depth|inlineStyleRanges|entityRanges|data|syntax|javascript|167734|对我很管用。|unstyled|167735|-g很重要，因为它最初是使用该选项设置的。您可以使用以下命令检查设置的配置：|offset|length|style|CODE|167736|npm+config+list|167737|entityMap^0|0|0|0|2|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@]|A|$B|C]]|$1|D|3|E|5|F|7|R|8|@]|9|@]|A|$]]|$1|G|3|H|5|F|7|S|8|@$I|T|J|U|K|L]]|9|@]|A|$]]|$1|M|3|N|5|6|7|V|8|@]|9|@]|A|$B|C]]|$1|O|3|-4|5|F|7|W|8|@]|9|@]|A|$]]]|P|$]]

<pre><code>npm config delete proxy -g
</code></pre>

worked for me.

<code>-g</code> was important as initially it was set with that option.
You can check configurations set with :

<pre><code>npm config list
</code></pre>

blocks|key|167695|text|npm+config+rm+proxy
npm+config+rm+https-proxy|type|code-block|depth|inlineStyleRanges|entityRanges|data|syntax|javascript|167696|对我很管用|unstyled|167697|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$B|C]]|$1|D|3|E|5|F|7|J|8|@]|9|@]|A|$]]|$1|G|3|-4|5|F|7|K|8|@]|9|@]|A|$]]]|H|$]]

<pre><code>npm config rm proxy
npm config rm https-proxy
</code></pre>

Worked for me

blocks|key|4673369|text|我认为它不是http-proxy，而是proxy：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4673370|npm+config+set+proxy="http://yourproxyhere"|code-block|syntax|javascript|4673371|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

I think it's not http-proxy but proxy:

<pre><code>npm config set proxy="http://yourproxyhere"
</code></pre>

blocks|key|4673399|text|得到完全相同的问题，我仍然看到我的代理配置，即使在删除npmrc文件和删除密钥。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4673400|我发现npm默认使用的是windows环境密钥http-proxy。|4673401|因此，在计算机->属性->高级系统设置->环境变量中，检查是否配置了http-proxy密钥。|4673402|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|H|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|I|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|J|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|G|$]]

Got exactly the same problem, I keep seeing my proxy configuration even after removing the npmrc file and deleting the keys.

I found out that npm were using windows env key http-proxy by default. 

So go in Computer->Properties->Advanced system settings->Environement variables and check there is no http-proxy key configured.

blocks|key|167808|text|请参阅文件C:\Users\myusers.npmrc文件中的npm设置。有时npm代理配置设置不适用。所以这是值得一查的。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|167809|entityMap^0|5|M|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|K|8|@]|D|@]|E|$]]]|G|$]]

See the npm Settings in file <code>C:\Users\myusers.npmrc</code> file. Sometime the npm proxy config settings does not apply. so its worth checking in there.

blocks|key|168115|text|执行npm配置列表它将列出所有代理值。在我的例子中，代理值是从全局npmrc文件中获取的，删除了它，并且能够在我的windows机器上完成npm安装。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|168116|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

execute npm config list
it will list down all proxy values.. in my case proxy value was fetched form global npmrc file, removed it and was able to complete npm install on my windows machine

blocks|key|168183|text|好吧，我把这个留在这里，因为我在NPM上遇到了很大的麻烦。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|168184|我正在尝试使用npm+config+set+proxy+"http://.../"更改代理设置，然后运行npm+config+get+proxy。它总是返回一个错误的值，与我设置的值不同。|offset|length|style|CODE|168185|我发现我在试图运行npm+install的项目上提交了一个.npmrc，并且这个文件覆盖了我自己的配置。|168186|所以它清除了代理值，但我还需要更改文件夹项目中的.npmrc。|168187|在那之后，一切都运行得很好。|168188|entityMap^0|0|7|Y|1G|K|0|9|B|T|6|0|O|6|0|0^^$0|@$1|2|3|4|5|6|7|P|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|Q|8|@$D|R|E|S|F|G]|$D|T|E|U|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|V|8|@$D|W|E|X|F|G]|$D|Y|E|Z|F|G]]|9|@]|A|$]]|$1|J|3|K|5|6|7|10|8|@$D|11|E|12|F|G]]|9|@]|A|$]]|$1|L|3|M|5|6|7|13|8|@]|9|@]|A|$]]|$1|N|3|-4|5|6|7|14|8|@]|9|@]|A|$]]]|O|$]]

Well, I'm gonna leave this here because I was having a big trouble with NPM.

I was trying to change a proxy setting using <code>npm config set proxy "http://.../"</code> and then running <code>npm config get proxy</code>. It was ALWAYS returning a wrong value, different from the one that I'd set.

I found out that I had a <code>.npmrc</code> COMMITED on the project I was trying to run <code>npm install</code> and that this file was overriding my own config. 

So it was cleaning the proxy value, but I needed to also change the <code>.npmrc</code> inside the folder's project.

After that, everything worked fine.

blocks|key|4674146|text|如果您想在公司网络代理和家庭/个人网络删除代理之间切换，您可以使用--no-proxy|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|4674147|示例用法：|4674148|npm+install+--save-dev+"@angular/animations@8.2.14"+--no-proxy|code-block|syntax|javascript|4674149|entityMap^0|X|A|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@$9|P|A|Q|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|R|8|@]|D|@]|E|$]]|$1|H|3|I|5|J|7|S|8|@]|D|@]|E|$K|L]]|$1|M|3|-4|5|6|7|T|8|@]|D|@]|E|$]]]|N|$]]

If you want to switch between proxy for company network and remove proxy for home/personal network you can use <code>--no-proxy</code>

Sample usage: 

<pre><code>npm install --save-dev "@angular/animations@8.2.14" --no-proxy
</code></pre>

blocks|key|4673722|text|我用过|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4673723|npm+config+set+proxy+null
npm+config+set+https-proxy+null|code-block|syntax|javascript|4673724|这对我很管用。|4673725|诚挚的问候|4673726|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|N|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|O|8|@]|9|@]|A|$]]|$1|I|3|J|5|6|7|P|8|@]|9|@]|A|$]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

I've used 

<pre><code>npm config set proxy null
npm config set https-proxy null
</code></pre>

and it worked for me.

Best regards

blocks|key|4673772|text|这对我很管用|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4673773|proxy=http://<username>:<pass>@proxyhost:<port>

https-proxy=http://<uname>:<pass>@proxyhost:<port>|code-block|syntax|javascript|4673774|我的实例中的示例用户名:uname和密码:pword|4673775|npm+config+set+proxy=http://uname:pword@192.168.5.8:8080

npm+config+set+https-proxy=http://uname:pword@192.168.5.8:8080|4673776|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|N|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|O|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

this works for me fime

<pre><code>proxy=http://&lt;username&gt;:&lt;pass&gt;@proxyhost:&lt;port&gt;

https-proxy=http://&lt;uname&gt;:&lt;pass&gt;@proxyhost:&lt;port&gt;
</code></pre>

sample in my instance username:uname and password:pword

<pre><code>npm config set proxy=http://uname:pword@192.168.5.8:8080

npm config set https-proxy=http://uname:pword@192.168.5.8:8080
</code></pre>

blocks|key|4674053|text|我为此苦苦挣扎了很长时间。我最后做的是进入.npmrc文件(它可以在用户的目录中找到，后面跟着用户的名字，即.C:\Users\erikj/.npmrc)，使用文本编辑器打开它，手动删除所有代理设置，并将http://设置更改为https://.在这种情况下，这是一个实验的问题，是否http或https将为您工作。在我的例子中，https起作用了。去想一想。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4674054|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I was struggling with this for ages. What I finally did was go into the .npmrc file (which can be found in the user's directory followed by the user's name, ie. C:\Users\erikj/.npmrc), opened it with a text editor, manually removed any proxy settings and changed the http:// setting to https://. In this case, it is a matter of experimenting whether http or https will work for you. In my case, https worked. Go figure.

blocks|key|4674177|text|在我的例子中(windows+OS)，在列出了所有这些命令之后，npm继续在windows注册表的设置中使用代理|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4674178|\+HKEY_CURRENT_USER+\环境|4674179|只需删除那里的代理设置，在那之后，我重新启动pc，然后"npm+install“为我工作|4674180|Example|offset|length|4674181|entityMap|0|LINK|mutability|MUTABLE|url|https://i.stack.imgur.com/vadvU.png^0|0|0|0|0|7|0|0^^$0|@$1|2|3|4|5|6|7|R|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|S|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|T|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|U|8|@]|9|@$H|V|I|W|1|X]]|A|$]]|$1|J|3|-4|5|6|7|Y|8|@]|9|@]|A|$]]]|K|$L|$5|M|N|O|A|$P|Q]]]]

In my case, (windows OS), after put all those commands listed, npm kept taking
the proxy in the setting of windows registry

\ HKEY_CURRENT_USER \ Environment

just remove the proxy settings there, after that, I restarted the pc and then "npm install" worked for me

<a href="https://i.stack.imgur.com/vadvU.png" rel="nofollow noreferrer">Example</a>

blocks|key|4674242|text|这将从本地和全局配置中清除代理，而不使用--global它将仅从当前用户配置文件中清除：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4674243|npm+config+rm+proxy+npm+config+rm+https-proxy+npm+config+--全局rm代理npm+config+--全局rm+https-proxy|4674244|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

this will clean-up proxies from both local and global configs without --global it will clear only from the current user profile:
npm config rm proxy
npm config rm https-proxy
npm config --global rm proxy
npm config --global rm https-proxy

blocks|key|4673588|text|您将从服务器管理员或支持人员处获得代理主机和端口。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4673589|在那之后设置|4673590|npm+config+set+http_proxy+http://username:password@proxyofmycomp.com:itsport+npm+config+set+proxy+http://username:password@proxyofmycomp.com:itsport如果密码中有任何特殊字符，请使用%25+urlencode进行尝试。例如：-井号(散列)应替换为%2523。|offset|length|4673591|这对我很有效..。|4673592|entityMap|0|LINK|mutability|MUTABLE|url|http://username:password@proxyofmycomp.com:itsport|1^0|0|0|Q|1E|0|2Q|1E|1|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|T|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|U|8|@]|9|@$F|V|G|W|1|X]|$F|Y|G|Z|1|10]]|A|$]]|$1|H|3|I|5|6|7|11|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|12|8|@]|9|@]|A|$]]]|K|$L|$5|M|N|O|A|$P|Q]]|R|$5|M|N|O|A|$P|Q]]]]

You will get the proxy host and port from your server administrator or support.

After that set up

npm config set http_proxy <a href="http://username:password@proxyofmycomp.com:itsport" rel="nofollow">http://username:password@proxyofmycomp.com:itsport</a>
npm config set proxy <a href="http://username:password@proxyofmycomp.com:itsport" rel="nofollow">http://username:password@proxyofmycomp.com:itsport</a>
If there any special character in password try with % urlencode. Eg:- pound(hash) shuold be replaced by %23.

This worked for me...

blocks|key|167755|text|好的，"NPM配置删除...“是Windows环境的正确命令，反之亦然"NPM+config+rm+...“它适用于类Unix环境。此外，至少对我来说，添加选项"-g“是强制性的，因为该命令可以正常工作|type|unstyled|depth|inlineStyleRanges|entityRanges|data|167756|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

ok, "NPM config delete ..." is the right command for Windows environment, viceversa "NPM config rm ..." it is for Unix-like environment.
Moreover, at least for me, it was mandatory to add the option "-g" because the command worked properly

How can I clear the previous ssl proxy setting of NPM? 
well, I search a lot, but all post I got is mainly about how to <code>set</code> proxy in corporate network.

I try to set proxy to nothing:

<pre><code>npm config set http-proxy
npm config set https-proxy
</code></pre>

the first command pass yet the second one warn that:

<pre><code>npm WARN invalid config proxy=""
npm WARN invalid config Must be a full url with 'http://'
</code></pre>

is the warning neglectable and I have successfully clear the proxy setting?

How to clear https proxy setting of NPM?

服务器

Windows

Debian

Unix

如何清除NPM以前的ssl代理设置？嗯，我搜索了很多，但我得到的所有帖子都是关于如何在企业网络中set代理的。我尝试将代理设置为nothing：npm config set http-proxynpm config set https-proxy第一个命令传递，但第二个命令警告：npm WARN invalid config proxy=""npm WARN invalid config Must

问如何清除NPM的https proxy设置？
EN

回答 27

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何清除NPM的https proxy设置？EN

回答 27

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何清除NPM的https proxy设置？
EN