blocks|key|1038309|text|str.Substring(str.Length+-+5)|type|code-block|depth|inlineStyleRanges|entityRanges|data|syntax|javascript|1038310|unstyled|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|G|8|@]|9|@]|A|$B|C]]|$1|D|3|-4|5|E|7|H|8|@]|9|@]|A|$]]]|F|$]]

<pre><code>str.Substring(str.Length - 5)
</code></pre>

blocks|key|1253367|text|检查错误：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1253368|Dim+result+As+String+=+str
If+str.Length+>+5+Then
++++result+=+str.Substring(str.Length+-+5)
End+If|code-block|syntax|javascript|1253369|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

Checks for errors:

<pre><code>Dim result As String = str
If str.Length &gt; 5 Then
 result = str.Substring(str.Length - 5)
End If
</code></pre>

blocks|key|1038362|text|错误检查：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1038363|result+=+str.Substring(Math.Max(0,+str.Length+-+5))|code-block|syntax|javascript|1038364|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

Error check:

<pre><code>result = str.Substring(Math.Max(0, str.Length - 5))
</code></pre>

blocks|key|1253429|text|在VB+2008+(VB+9.0)及更高版本中，将Right()前缀设置为Microsoft.VisualBasic.Right(字符串，字符数)|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1253430|Dim+str+as+String+=+"Hello+World“|1253431|消息框(Microsoft.VisualBasic.Right(str，5))|1253432|“世界”|1253433|Left()也是如此。|1253434|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|M|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|N|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|O|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|P|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|K|$]]

in VB 2008 (VB 9.0) and later, prefix Right() as Microsoft.VisualBasic.Right(string, number of characters)

Dim str as String = "Hello World"

Msgbox(Microsoft.VisualBasic.Right(str,5))

'World"

Same goes for Left() too.

blocks|key|1038521|text|我打开这个帖子寻找一个简单问题的快速解决方案，但我发现这里的答案要么没有帮助，要么过于复杂。获取字符串最后5个字符的最好方法实际上是使用Right()方法。下面是一个简单的例子：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1038522|Dim+sMyString,+sLast5+As+String

sMyString+=+"I+will+be+going+to+school+in+2011!"
sLast5+=+Right(sMyString,+-+5)
MsgBox("sLast5+=+"+&+sLast5)|code-block|syntax|javascript|1038523|如果你得到一个错误，那么可能是你的语法有问题。而且，使用正确的()方法，您不需要过多地担心字符串长度是否超过或低于字符串长度。在我的示例中，您可以输入10000而不是5，它将只输入整个字符串，或者如果sMyString为MsgBox或""，则消息框将弹出，但不显示任何内容。|1038524|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

I opened this thread looking for a quick solution to a simple question, but I found that the answers here were either not helpful or overly complicated. The best way to get the last 5 chars of a string is, in fact, to use the Right() method. Here is a simple example:

<pre><code>Dim sMyString, sLast5 As String

sMyString = "I will be going to school in 2011!"
sLast5 = Right(sMyString, - 5)
MsgBox("sLast5 = " &amp; sLast5)
</code></pre>

If you're getting an error then there is probably something wrong with your syntax. 
Also, with the Right() method you don't need to worry much about going over or under the string length. In my example you could type in 10000 instead of 5 and it would just MsgBox the whole string, or if sMyString was NULL or "", the message box would just pop up with nothing.

blocks|key|1038540|text|Dim+a+As+String+=+Microsoft.VisualBasic.right("I+will+be+going+to+school+in+2011!",+5)
MsgBox("the+value+is:"+&+a)|type|code-block|depth|inlineStyleRanges|entityRanges|data|syntax|javascript|1038541|unstyled|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|G|8|@]|9|@]|A|$B|C]]|$1|D|3|-4|5|E|7|H|8|@]|9|@]|A|$]]]|F|$]]

<pre><code>Dim a As String = Microsoft.VisualBasic.right("I will be going to school in 2011!", 5)
MsgBox("the value is:" &amp; a)
</code></pre>

blocks|key|1253576|text|老线程，但只是说:要使用经典的Left()，Right()，Mid()，现在你不需要写完整路径(Microsoft.VisualBasic.Strings)。您可以像这样快速、轻松地使用：|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1253577|Strings.Right(yourString,+5)|code-block|syntax|javascript|1253578|entityMap^0|F|6|M|7|U|5|1C|T|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@$9|N|A|O|B|C]|$9|P|A|Q|B|C]|$9|R|A|S|B|C]|$9|T|A|U|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|V|8|@]|D|@]|E|$I|J]]|$1|K|3|-4|5|6|7|W|8|@]|D|@]|E|$]]]|L|$]]

Old thread, but just only to say: to use the classic <code>Left()</code>, <code>Right()</code>, <code>Mid()</code> right now you don't need to write the full path (<code>Microsoft.VisualBasic.Strings</code>). You can use fast and easily like this:

<pre><code>Strings.Right(yourString, 5)
</code></pre>

I want to get the last 5 digits/characters from a string. For example, from <code>"I will be going to school in 2011!"</code>, I would like to get <code>"2011!"</code>.

Any ideas? I know Visual Basic has <code>Right(string, 5)</code>; this didn't work for me and gave me an error.

Get last 5 characters in a string

我想从字符串中获取最后5个数字/字符。例如，我想从"I will be going to school in 2011!"获取"2011!"。有什么想法吗？我知道Visual Basic有Right(string, 5)；这对我不起作用，并给了我一个错误。

问获取字符串中的最后5个字符
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问获取字符串中的最后5个字符EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问获取字符串中的最后5个字符
EN