blocks|key|145898|text|在命令提示符下使用以下命令：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|145899|java+-jar+jenkins.war+--httpPort=9090|code-block|syntax|javascript|145900|如果您想使用https，请使用以下命令：|145901|java+-jar+jenkins.war+--httpsPort=9090|145902|详情请参阅here|offset|length|145903|entityMap|0|LINK|mutability|MUTABLE|url|https://www.jenkins.io/doc/book/installing/initial-settings/^0|0|0|0|0|5|4|0|0^^$0|@$1|2|3|4|5|6|7|W|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|X|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Y|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|Z|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|10|8|@]|9|@$M|11|N|12|1|13]]|A|$]]|$1|O|3|-4|5|6|7|14|8|@]|9|@]|A|$]]]|P|$Q|$5|R|S|T|A|$U|V]]]]

Use the following command at command prompt:
<pre><code>java -jar jenkins.war --httpPort=9090
</code></pre>
If you want to use https use the following command:
<pre><code>java -jar jenkins.war --httpsPort=9090
</code></pre>
Details are <a href="https://www.jenkins.io/doc/book/installing/initial-settings/" rel="nofollow noreferrer">here</a>

blocks|key|145921|text|打开jenkins主文件夹中的jenkins.xml+(通常为C:\Program+Files+(x86)\Jenkins)，然后更改端口号：|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|145922|httpPort=xxxx|145923|至|145924|httpPort=yyyy|145925|然后重新启动服务。它应该永久地更改设置。|145926|entityMap^0|F|B|V|U|0|0|D|0|0|0|D|0|0^^$0|@$1|2|3|4|5|6|7|P|8|@$9|Q|A|R|B|C]|$9|S|A|T|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|U|8|@$9|V|A|W|B|C]]|D|@]|E|$]]|$1|H|3|I|5|6|7|X|8|@]|D|@]|E|$]]|$1|J|3|K|5|6|7|Y|8|@$9|Z|A|10|B|C]]|D|@]|E|$]]|$1|L|3|M|5|6|7|11|8|@]|D|@]|E|$]]|$1|N|3|-4|5|6|7|12|8|@]|D|@]|E|$]]]|O|$]]

Open the <code>jenkins.xml</code> in the jenkins home folder (usually <code>C:\Program Files (x86)\Jenkins</code>) and change the port number: 
<code>httpPort=xxxx</code>
 to 
<code>httpPort=yyyy</code>
 
then restart the service. it should change the setting permanently.

blocks|key|146072|text|在CentOS/RedHat下(假设您安装了jenkins包)|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|146073|vim+/etc/sysconfig/jenkins|146074|....
#+Port+Jenkins+is+listening+on.
#+Set+to+-1+to+disable
#
JENKINS_PORT="8080"|code-block|syntax|javascript|146075|将其更改为您想要的任何端口。|146076|entityMap^0|M|7|0|0|Q|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@$9|R|A|S|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|T|8|@$9|U|A|V|B|C]]|D|@]|E|$]]|$1|H|3|I|5|J|7|W|8|@]|D|@]|E|$K|L]]|$1|M|3|N|5|6|7|X|8|@]|D|@]|E|$]]|$1|O|3|-4|5|6|7|Y|8|@]|D|@]|E|$]]]|P|$]]

In CentOS/RedHat (assuming you installed the <code>jenkins</code> package)

<code>vim /etc/sysconfig/jenkins</code>

<pre><code>....
# Port Jenkins is listening on.
# Set to -1 to disable
#
JENKINS_PORT="8080"
</code></pre>

change it to any port you want.

blocks|key|146012|text|为了方便在这里找到自己的Linux用户:我发现/etc/sysconfig/jenkins有一个JENKINS_PORT="8080"，您可能也应该修改它。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|146013|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

For the benefit of Linux users who find themselves here: I found /etc/sysconfig/jenkins has a JENKINS_PORT="8080", which you should probably change too.

blocks|key|146221|text|在CentOS/RedHat中的*nix|type|unstyled|depth|inlineStyleRanges|entityRanges|data|146222|vim+/etc/sysconfig/jenkins|146223|#+Port+Jenkins+is+listening+on.
#+Set+to+-1+to+disable
#
JENKINS_PORT="8080"|code-block|syntax|javascript|146224|在windows中打开XML文件C:\Program+Files+(x86)\Jenkins\jenkins.xml|146225|<executable>%25BASE%25\jre\bin\java</executable>
++<arguments>-Xrs+-Xmx256m+-Dhudson.lifecycle=hudson.lifecycle.WindowsServiceLifecycle+-jar+"%25BASE%25\jenkins.war"+--**httpPort=8083**</arguments>
+i+made++above+bold++to+show+you+change+then+
+<executable>%25BASE%25\jre\bin\java</executable>
++<arguments>-Xrs+-Xmx256m+-Dhudson.lifecycle=hudson.lifecycle.WindowsServiceLifecycle+-jar+"%25BASE%25\jenkins.war"+--httpPort=8083</arguments>|146226|现在你必须重启它不工作，除非你重启http://localhost:8080/restart，然后在重启http://localhost:8083/之后，一切都应该很好，所以看起来像上面的所有响应，它不工作，我们有重启。|offset|length|146227|entityMap|0|LINK|mutability|MUTABLE|url|http://localhost:8080/restart|1|http://localhost:8083/^0|0|0|0|0|0|H|T|0|1G|M|1|0^^$0|@$1|2|3|4|5|6|7|10|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|11|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|12|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|13|8|@]|9|@]|A|$]]|$1|K|3|L|5|F|7|14|8|@]|9|@]|A|$G|H]]|$1|M|3|N|5|6|7|15|8|@]|9|@$O|16|P|17|1|18]|$O|19|P|1A|1|1B]]|A|$]]|$1|Q|3|-4|5|6|7|1C|8|@]|9|@]|A|$]]]|R|$S|$5|T|U|V|A|$W|X]]|Y|$5|T|U|V|A|$W|Z]]]]

In *nix 
In CentOS/RedHat

vim /etc/sysconfig/jenkins

<pre><code># Port Jenkins is listening on.
# Set to -1 to disable
#
JENKINS_PORT="8080"
</code></pre>

In windows open XML file 
C:\Program Files (x86)\Jenkins\jenkins.xml

<pre><code>&lt;executable&gt;%BASE%\jre\bin\java&lt;/executable&gt;
 &lt;arguments&gt;-Xrs -Xmx256m -Dhudson.lifecycle=hudson.lifecycle.WindowsServiceLifecycle -jar "%BASE%\jenkins.war" --**httpPort=8083**&lt;/arguments&gt;
 i made above bold to show you change then 
 &lt;executable&gt;%BASE%\jre\bin\java&lt;/executable&gt;
 &lt;arguments&gt;-Xrs -Xmx256m -Dhudson.lifecycle=hudson.lifecycle.WindowsServiceLifecycle -jar "%BASE%\jenkins.war" --httpPort=8083&lt;/arguments&gt;
</code></pre>

now you have to restart it doesnot work unless you restart
<a href="http://localhost:8080/restart" rel="noreferrer">http://localhost:8080/restart</a>
then after restart 
<a href="http://localhost:8083/" rel="noreferrer">http://localhost:8083/</a>
all should be well so looks like the all above response which says it does not work We have restart.

blocks|key|364326|text|对于Fedora、RedHat、CentOS等，任何自定义都应该在/etc/sysconfig/jenkins中完成，而不是在/etc/init.d/jenkins中。第一个文件的目的就是定制第二个文件。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|364327|因此，在/etc/sysconfig/jenkins中，有一个JENKINS_PORT变量，它保存运行Jenkins的端口号。|364328|entityMap^0|2|6|9|6|G|6|X|M|1R|J|0|4|M|V|C|0^^$0|@$1|2|3|4|5|6|7|J|8|@$9|K|A|L|B|C]|$9|M|A|N|B|C]|$9|O|A|P|B|C]|$9|Q|A|R|B|C]|$9|S|A|T|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|U|8|@$9|V|A|W|B|C]|$9|X|A|Y|B|C]]|D|@]|E|$]]|$1|H|3|-4|5|6|7|Z|8|@]|D|@]|E|$]]]|I|$]]

For <code>Fedora</code>, <code>RedHat</code>, <code>CentOS</code> and alike, any customization should be done within <code>/etc/sysconfig/jenkins</code> instead of <code>/etc/init.d/jenkins</code>. The purpose of the first file is exactly the customization of the second file.

So, within <code>/etc/sysconfig/jenkins</code>, there is a the <code>JENKINS_PORT</code> variable that holds the port number on which Jenkins is running.

blocks|key|146171|text|正确，请使用--httpPort参数。如果您还想指定$JENKINS_HOME，可以这样做：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|146172|java+-DJENKINS_HOME=/Users/Heros/jenkins+-jar+jenkins.war++--httpPort=8484|code-block|syntax|javascript|146173|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

Correct, use --httpPort parameter. If you also want to specify the $JENKINS_HOME, you can do like this: 

<pre><code>java -DJENKINS_HOME=/Users/Heros/jenkins -jar jenkins.war --httpPort=8484
</code></pre>

blocks|key|146293|text|如果您已经在带有linux+AMI的ec2实例上配置了jenkins，并且希望更改端口。编辑位于的文件|type|unstyled|depth|inlineStyleRanges|entityRanges|data|146294|sudo+vi+/etc/sysconfig/jenkins|code-block|syntax|javascript|146295|编辑|146296|JENKINS_PORT="your+port+number"|146297|退出vim|146298|:wq|146299|重启jenkins|146300|sudo+service+jenkins+restart|146301|或者简单地启动它，如果它还没有运行|146302|sudo+service+jenkins+start|146303|验证您的jenkins是否在上述端口上运行|146304|netstat+-lntu+%7C+grep+"your+port+number"|146305|entityMap^0|0|0|0|0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|12|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|13|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|14|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|15|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|16|8|@]|9|@]|A|$]]|$1|M|3|N|5|D|7|17|8|@]|9|@]|A|$E|F]]|$1|O|3|P|5|6|7|18|8|@]|9|@]|A|$]]|$1|Q|3|R|5|D|7|19|8|@]|9|@]|A|$E|F]]|$1|S|3|T|5|6|7|1A|8|@]|9|@]|A|$]]|$1|U|3|V|5|D|7|1B|8|@]|9|@]|A|$E|F]]|$1|W|3|X|5|6|7|1C|8|@]|9|@]|A|$]]|$1|Y|3|Z|5|D|7|1D|8|@]|9|@]|A|$E|F]]|$1|10|3|-4|5|6|7|1E|8|@]|9|@]|A|$]]]|11|$]]

If you have configured jenkins on ec2 instance with linux AMI and looking to change the port.
Edit the file at 

<pre><code>sudo vi /etc/sysconfig/jenkins
</code></pre>

Edit 

<pre><code>JENKINS_PORT="your port number"
</code></pre>

Exit vim

<pre><code>:wq
</code></pre>

Restart jenkins

<pre><code>sudo service jenkins restart
</code></pre>

Or simply start it, if its not already running

<pre><code>sudo service jenkins start
</code></pre>

To verify if your jenkins is running on mentioned port

<pre><code>netstat -lntu | grep "your port number"
</code></pre>

blocks|key|146045|text|你可以打电话给|type|unstyled|depth|inlineStyleRanges|entityRanges|data|146046|java+-jar+jenkins.war+--help|code-block|syntax|javascript|146047|以查看所有可用参数的列表。|146048|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

You can call

<pre><code>java -jar jenkins.war --help
</code></pre>

to see a list of all available parameters.

blocks|key|146098|text|在文件/etc/init.d/jenkins中的DAEMON_ARGS之后添加以下两行|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|146099|HTTP_PORT=8010|146100|JENKINS_ARGS="--httpPort=$HTTP_PORT“|146101|entityMap^0|3|J|0|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@$9|M|A|N|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|O|8|@]|D|@]|E|$]]|$1|H|3|I|5|6|7|P|8|@]|D|@]|E|$]]|$1|J|3|-4|5|6|7|Q|8|@]|D|@]|E|$]]]|K|$]]

Add the following two lines after DAEMON_ARGS in the file <code>/etc/init.d/jenkins</code> 

HTTP_PORT=8010 
JENKINS_ARGS="--httpPort=$HTTP_PORT"

blocks|key|146252|text|在OSX编辑文件中：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|146253|/usr/local/Cellar/jenkins-lts/2.46.1/homebrew.mxcl.jenkins-lts.plist|code-block|syntax|javascript|146254|并根据需要编辑端口。|146255|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

On OSX edit file:

<pre><code>/usr/local/Cellar/jenkins-lts/2.46.1/homebrew.mxcl.jenkins-lts.plist
</code></pre>

and edit port to you needs.

blocks|key|364149|text|更改'/etc/init.d/jenkins‘shell|type|unstyled|depth|inlineStyleRanges|entityRanges|data|364150|check_tcp_port+"http"+"$HTTP_PORT"+"8080"+%7C%7C+return+1|code-block|syntax|javascript|364151|将8080更改为您想要的任何值|offset|length|style|CODE|364152|entityMap^0|0|0|1|4|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Q|8|@$I|R|J|S|K|L]]|9|@]|A|$]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

Change the '/etc/init.d/jenkins' shell

<pre><code>check_tcp_port "http" "$HTTP_PORT" "8080" || return 1
</code></pre>

Change <code>8080</code> to whichever you want

I have jenkins.war and I started it from command prompt in Windows as:

<pre><code>java -jar jenkins.war
</code></pre>

It was started well and easily browsed as <code>http://localhost:8080</code>

I want to start on 9090 port. How can I do that?

How to start jenkins on different port rather than 8080 using command prompt in Windows?

CentOS

Fedora

Linux

我有jenkins.war，我从命令提示符窗口启动它，如下所示：java -jar jenkins.war它启动得很好，并且作为http://localhost:8080很容易浏览。我想从9090端口开始。我该怎么做呢？

问如何使用Windows中的命令提示符在不同的端口而不是8080上启动jenkins？
EN

回答 12

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何使用Windows中的命令提示符在不同的端口而不是8080上启动jenkins？EN

回答 12

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何使用Windows中的命令提示符在不同的端口而不是8080上启动jenkins？
EN