blocks|key|304408|text|我也面临着同样的问题。然而，在我进入Project->Clean...之后，它工作了。我不知道为什么会这样。希望这能有所帮助|type|unstyled|depth|inlineStyleRanges|entityRanges|data|304409|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I faced the same problem. However, it worked after i went to Project->Clean...
Don't know why it happened though.
Hope this helps

blocks|key|3037327|text|对我有效的解决方案是，当你收到消息时：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3037328|3037329|正在等待启动主页('android.process.acore')+...|blockquote|3037330|3037331|3037332|等待几秒钟，然后右键单击项目并再次单击run+as+Android+application。|3037333|entityMap^0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|M|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|N|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|O|8|@]|9|@]|A|$]]|$1|G|3|-4|5|6|7|P|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|Q|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|R|8|@]|9|@]|A|$]]]|K|$]]

The solution which worked for me is, when you get the message:

<blockquote>
 Waiting for HOME ('android.process.acore') to be launched...
</blockquote>

Wait for few seconds and then right click on the project and click run as Android application once again.

blocks|key|305280|text|出现这个问题的原因是，当在"Create+new+Android+virtual+device(+AVD+)“对话框窗口中创建AVD管理器时，"Snapshot”被我标记为"Enabled“。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|305281|解决方案：|305282|创建一个新的AVD管理器而不选中"Enabled“复选框，然后尝试使用新创建的AVD管理器作为"Target”来运行项目，该问题不会再发生|305283|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|H|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|I|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|J|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|G|$]]

This problem occurs because while creating the AVD manager in the "Create new Android virtual device(AVD)" dialog window ,"Snapshot" was marked as "Enabled" by me. 

<h2>Solution:</h2>

Create a new AVD manager with the "Enabled" checkbox not checked and then try running the project with the newly created AVD manager as "Target" , the problem will not occur anymore

blocks|key|302193|text|我将虚拟设备SD卡的大小从500MB增加到2GiB，问题就解决了。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|302194|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I increased the virtual device SD card size from 500MB to 2GiB, the problem solved.

blocks|key|3251705|text|对我来说起作用的是从AVD管理器中删除AVD并创建一个新的。然后转到|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3251706|Run+>Run+Configurations，选择目标选项卡，然后选择新的AVD。|3251707|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

What worked for me was to delete the AVD from the AVD manager and create a new one. Then go to 
Run >Run Configurations, select the target tab and choose the new AVD.

blocks|key|307401|text|我总是遇到这个问题，在我试图解决这个问题的过程中，我失去了很多潜在的生产力和教育时间。对我来说唯一有效的是其他三个好答案的组合：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|307402|307403|项目->清理|ordered-list-item|307404|删除所有的and并创建新的|307405|如果尝试运行仍然挂起太长时间的‘等待回家’(超过两分钟)或仿真器保持重启每分钟左右，尝试作为安卓应用程序运行几次，选择相同的现有仿真器实例(我总是选择手动运行)。|307406|307407|奇怪的是，没有人知道为什么会出现这个问题，是什么导致了这个问题，或者是内部发生了什么。我能提供的唯一线索是，在“等待回家”暂停期间，DDMS显示了几行类似于“未找到预加载的类:+libcore.base.CollectionUtils”的行。|307408|entityMap^0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|P|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|Q|8|@]|9|@]|A|$]]|$1|F|3|G|5|E|7|R|8|@]|9|@]|A|$]]|$1|H|3|I|5|E|7|S|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|T|8|@]|9|@]|A|$]]|$1|K|3|L|5|6|7|U|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|V|8|@]|9|@]|A|$]]]|N|$]]

I get this problem all the time and have lost many hours of potential productivity and education while I try to fix it. The only thing that works for me is the combination of three other good answers:

<ol>
<li>Project -> Clean</li>
<li>Delete all the AVDs and create new ones</li>
<li>If an attempt to run still hangs too long on 'Waiting for HOME' (over two minutes) or the emulator keeps rebooting every minute or so, try Run as Android App several times, choosing the same existing emulator instance (I always choose runs manually). </li>
</ol>

It's odd that no one has a clue why this problem comes up, what causes it or what is going on internally. The only clue I can supply is that DDMS shows a few lines like "Class not found for preloading: libcore.base.CollectionUtils" during the 'Waiting for HOME' pause.

blocks|key|304485|text|以下步骤对我有效:+1.转到项目->清理。2.删除之前的AVD并创建新的AVD。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|304486|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Following steps worked for me:
1. Goto Project -> Clean.
2. Delete your previous AVD and create a new one.

blocks|key|3251778|text|以下步骤对我有效:+1.转到项目->清理。2.删除之前的AVD并创建新的AVD。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3251779|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Following steps worked for me: 1. Goto Project -> Clean. 2. Delete your previous AVD and create a new one.

blocks|key|3251786|text|选项：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3251787|3251788|单击仿真器上的主页按钮。等待时间可能是2秒....这对我来说总是有效的！|unordered-list-item|3251789|3251790|或|3251791|3251792|采纳了史瑞亚的建议(建议最多的一个，由格雷编辑)。|3251793|3251794|entityMap^0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|P|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|Q|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|R|8|@]|9|@]|A|$]]|$1|G|3|H|5|6|7|S|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|T|8|@]|9|@]|A|$]]|$1|J|3|K|5|E|7|U|8|@]|9|@]|A|$]]|$1|L|3|-4|5|6|7|V|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|W|8|@]|9|@]|A|$]]]|N|$]]

Options:

<ul>
<li>Click on the HOME Button on the Emulator. Wait for may be 2
seconds.... 
 This always works for me!!!</li>
</ul>

or

<ul>
<li>Go with Shreya's suggestion (one with most suggestions and edited by
Gray).</li>
</ul>

blocks|key|305328|text|我在AVD设备中只有12+Mb的SD卡。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|305329|将其增加到2+Gb解决了这个问题。|305330|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

I had only 12 Mb for the SD Card in the AVD device.

Increasing it to 2 Gb solved the issue.

blocks|key|3251841|text|解决方案：|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|3251842|从命令行运行模拟器：|3251843|sdk/tools>+./emulator-x86+-avd+<DeviceName>+-partition-size+1024+-gpu+on|code-block|syntax|javascript|3251844|然后我也从命令行启动了应用程序(使用内置的Cordova/PhoneGap工具)：|3251845|myapp/cordova>+./run|3251846|背景|3251847|我认为这是某种硬件兼容性问题。我在使用时遇到了这个问题。我按照他们的建议安装了Intel+Hardware+Accelerated+Execution+Manager，我认为这就是我的问题所在。Eclipse使用(在sdk/tools文件夹中)+emulator64-x86程序来启动仿真器。我在Eclipse中找不到任何方法来改变这一点，但是我发现通过遵循的“提示和技巧”部分，我可以通过使用emulator-x86程序从命令行成功地运行模拟器。我不确定为什么emulator64-x86程序不能在我的系统上运行。I+。|CODE|3251848|我的系统：|3251849|英特尔至强10.6.8|3251850|2x2.26+v21.1.0-569685|unordered-list-item|3251851|
|3251852|Eclipse四核|3251853|+GHx+|3251854|6+GB内存|3251855|ADT|3251856|+3.8.0|3251857|3251858|我的AVD：|3251859|3251860|设备:+Nexus+One|3251861|目标:安卓4.2.2+-+API+Level+17|3251862|处理器:英特尔凌动(X86)|3251863|内存:512|3251864|内部存储:256|3251865|SD卡:+128|3251866|3251867|entityMap^0|0|5|0|0|0|0|0|0|2|0|30|9|3F|E|5H|C|6F|E|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|1X|8|@$9|1Y|A|1Z|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|20|8|@]|D|@]|E|$]]|$1|H|3|I|5|J|7|21|8|@]|D|@]|E|$K|L]]|$1|M|3|N|5|6|7|22|8|@]|D|@]|E|$]]|$1|O|3|P|5|J|7|23|8|@]|D|@]|E|$K|L]]|$1|Q|3|R|5|6|7|24|8|@$9|25|A|26|B|C]]|D|@]|E|$]]|$1|S|3|T|5|6|7|27|8|@$9|28|A|29|B|U]|$9|2A|A|2B|B|U]|$9|2C|A|2D|B|U]|$9|2E|A|2F|B|U]]|D|@]|E|$]]|$1|V|3|W|5|6|7|2G|8|@]|D|@]|E|$]]|$1|X|3|Y|5|6|7|2H|8|@]|D|@]|E|$]]|$1|Z|3|10|5|11|7|2I|8|@]|D|@]|E|$]]|$1|12|3|13|5|6|7|2J|8|@]|D|@]|E|$]]|$1|14|3|15|5|11|7|2K|8|@]|D|@]|E|$]]|$1|16|3|17|5|11|7|2L|8|@]|D|@]|E|$]]|$1|18|3|19|5|11|7|2M|8|@]|D|@]|E|$]]|$1|1A|3|1B|5|11|7|2N|8|@]|D|@]|E|$]]|$1|1C|3|1D|5|6|7|2O|8|@]|D|@]|E|$]]|$1|1E|3|-4|5|6|7|2P|8|@]|D|@]|E|$]]|$1|1F|3|1G|5|6|7|2Q|8|@]|D|@]|E|$]]|$1|1H|3|-4|5|6|7|2R|8|@]|D|@]|E|$]]|$1|1I|3|1J|5|11|7|2S|8|@]|D|@]|E|$]]|$1|1K|3|1L|5|11|7|2T|8|@]|D|@]|E|$]]|$1|1M|3|1N|5|11|7|2U|8|@]|D|@]|E|$]]|$1|1O|3|1P|5|11|7|2V|8|@]|D|@]|E|$]]|$1|1Q|3|1R|5|11|7|2W|8|@]|D|@]|E|$]]|$1|1S|3|1T|5|11|7|2X|8|@]|D|@]|E|$]]|$1|1U|3|-4|5|6|7|2Y|8|@]|D|@]|E|$]]|$1|1V|3|-4|5|6|7|2Z|8|@]|D|@]|E|$]]]|1W|$]]

SOLUTION:

Run the emulator from the command line:

<pre><code>sdk/tools&gt; ./emulator-x86 -avd &lt;DeviceName&gt; -partition-size 1024 -gpu on
</code></pre>

Then I launched the app from the command line as well (using built-in Cordova/PhoneGap tools):

<pre><code>myapp/cordova&gt; ./run
</code></pre>

BACKGROUND

I believe this is some sort of hardware compatibility issue. I came across this problem when following the <a href="http://docs.phonegap.com/en/2.4.0/guide_getting-started_android_index.md.html#Getting%20Started%20with%20Android" rel="nofollow">PhoneGap 2.4.0 Getting Started Instructions</a>. I followed their advice to install the Intel Hardware Accelerated Execution Manager, and I think this is the source of my trouble. Eclipse uses the <code>emulator64-x86</code> program (in the <code>sdk/tools</code> folder) to launch the emulator. I could not find any way inside of Eclipse to change this but I found by following the "Tips &amp; Tricks" section of the <a href="http://software.intel.com/en-us/articles/installation-instructions-for-intel-hardware-accelerated-execution-manager-mac-os-x" rel="nofollow">Intel HAXM web page</a> that I could get the emulator to run successfully from the command line by using the <code>emulator-x86</code> program instead. I'm not sure why the <code>emulator64-x86</code> program doesn't work on my system. I <a href="http://support.apple.com/kb/ht3696" rel="nofollow">confirmed at the Apple website that I do have a 64-bit processor</a>.

My system:

<ul>
<li>OSX 10.6.8</li>
<li>2x2.26 GHx Quad-core Intel Xeon</li>
<li>6 GB RAM</li>
<li>ADT v21.1.0-569685</li>
<li>Eclipse 3.8.0</li>
</ul>

My AVD:

<ul>
<li>Device: Nexus One</li>
<li>Target: Android 4.2.2 - API Level 17</li>
<li>CPU: Intel Atom (x86)</li>
<li>RAM: 512</li>
<li>Internal Storage: 256</li>
<li>SD Card: 128</li>
</ul>

blocks|key|3037626|text|这些解决方案对我都不起作用。相反，有效的方法是转到命令行工具(或Mac中的终端)，CD进入SDK/platform-tools目录，然后运行以下命令：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3037627|adb+kill-server|code-block|syntax|javascript|3037628|然后运行以下命令：|3037629|adb+start-server|3037630|在我这样做之后，一切又都正常了。为什么？谁知道呢。|3037631|在我的MAC上，platform-tools文件夹的路径是$HOME/Installations/adt-bundle-mac-x86_64-20130522/sdk/platform-tools，它可能位于您机器上的其他位置。|3037632|我还发现了这个页面，其中提供了一些有用的步骤：|3037633|http://android.okhelp.cz/android-emulator-wont-run-application-started-from-eclipse/|offset|length|3037634|entityMap|0|LINK|mutability|MUTABLE|url^0|0|0|0|0|0|0|0|0|2C|0|0^^$0|@$1|2|3|4|5|6|7|11|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|12|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|13|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|14|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|15|8|@]|9|@]|A|$]]|$1|M|3|N|5|6|7|16|8|@]|9|@]|A|$]]|$1|O|3|P|5|6|7|17|8|@]|9|@]|A|$]]|$1|Q|3|R|5|6|7|18|8|@]|9|@$S|19|T|1A|1|1B]]|A|$]]|$1|U|3|-4|5|6|7|1C|8|@]|9|@]|A|$]]]|V|$W|$5|X|Y|Z|A|$10|R]]]]

None of these solutions worked for me. Instead, what worked was to go to a command line tool (or terminal in Mac), CD into the SDK/platform-tools directory, and then run this:

<pre><code>adb kill-server
</code></pre>

then run this:

<pre><code>adb start-server
</code></pre>

After I did this everything worked again. Why? Who knows.

On my MAC the path to the platform-tools folder was $HOME/Installations/adt-bundle-mac-x86_64-20130522/sdk/platform-tools
It will probably be somewhere else on your machine.

I also found this page that presents some helpful steps:

<a href="http://android.okhelp.cz/android-emulator-wont-run-application-started-from-eclipse/" rel="nofollow">http://android.okhelp.cz/android-emulator-wont-run-application-started-from-eclipse/</a>

blocks|key|3251918|text|我创造了一个新设备。删除了前一个。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3251919|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I created a new device. Deleted the previous one.

blocks|key|302303|text|对我来说起作用的是在创建或编辑AVD+(Android虚拟设备)时启用“使用主机GPU”复选框。默认情况下，此复选框未启用。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|302304|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

What worked for me was enabling the checkbox "Use Host GPU" when creating or editing the AVD (Android Virtual Device). This checkbox was not enabled by default.

blocks|key|3037668|text|我通过创建一个新的虚拟设备并从AVD管理器启动它解决了这个问题。设备需要几分钟才能启动，您只需等待。然后，您可以在已经启动的设备上运行您的应用程序。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3037669|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I solved this issue by creating a new virtual device and launching it from the AVD manager. The device takes a few minutes to start, you just have to wait. Then you can run your application on the already started device.

blocks|key|3251968|text|我注意到这是一个老帖子。然而，我只是遇到了同样的问题，并找到了解决方案。A)确保您的CPU/ABI为atom+B)Ram为2048+C)VM+Heap为256+D)内部存储为200+E)确保检查使用主机GPU+F)设备为Nexus+5(我个人选择)+G)Android+4.4.2+API+Level+19|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3251969|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I noticed this is an old post. However I just ran into the same problem and found a solution. A) Make sure you have the CPU/ABI is atom
B)Ram is 2048
C)VM Heap is 256
D)Internal Storage is 200 
E)Make sure to check the Use Host GPU
F)Device is Nexus 5 (My personal choice)
G)Android 4.4.2 API Level 19

blocks|key|3037729|text|当我选择“Emulation+Options：”下的“Use+Host+GPU”选项时，它对我起作用了。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3037730|您可以在虚拟设备的编辑窗口中找到该选项。|3037731|​|3037732|📷|atomic|offset|length|3037733|3037734|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/a83bd24884c3e481cf406836ac91d39d.png|imageAlt^0|0|0|0|0|1|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|V|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|W|8|@]|9|@]|A|$]]|$1|F|3|G|5|H|7|X|8|@]|9|@$I|Y|J|Z|1|10]]|A|$]]|$1|K|3|E|5|6|7|11|8|@]|9|@]|A|$]]|$1|L|3|-4|5|6|7|12|8|@]|9|@]|A|$]]]|M|$N|$5|O|P|Q|A|$R|S|T|-4]]]]

It worked for me when I selected 'Use Host GPU' option under 'Emulation Options:'.

You can find the option under Edit window of the virtual device.

<img src="https://i.stack.imgur.com/PYswM.png" alt="enter image description here">

I tried working the Hello World application and the emulator freezes after it flashes the Android start screen. The home page is not shown. The last display on the console is 

<blockquote>
 Waiting for HOME ('android.process.acore') to be launched...
</blockquote>

I tried reinstalling Eclipse and Android again. It still did not work. Also the console does not show any errors. The log cat has the following errors:

<blockquote>
 06-18 20:39:11.543: ERROR/flash_image(544): can't find recovery partition
 06-18 20:39:11.843: ERROR/vold(538): Error opening switch name path '/sys/class/switch/test2' (No such file or directory)
 06-18 20:39:11.843: ERROR/vold(538): Error bootstrapping switch '/sys/class/switch/test2' (m)
 06-18 20:39:11.843: ERROR/vold(538): Error opening switch name path '/sys/class/switch/test' (No such file or directory)
 06-18 20:39:11.843: ERROR/vold(538): Error bootstrapping switch '/sys/class/switch/test' (m)
 06-18 20:46:31.842: ERROR/MemoryHeapBase(578): error opening /dev/pmem: No such file or directory
 06-18 20:46:31.892: ERROR/SurfaceFlinger(578): Couldn't open /sys/power/wait_for_fb_sleep or /sys/power/wait_for_fb_wake
 06-18 20:46:32.313: ERROR/GLLogger(578): couldn't load library (Cannot find library)
 06-18 20:46:33.634: ERROR/GLLogger(578): couldn't load library (Cannot find library)
</blockquote>

Waiting for HOME ('android.process.acore') to be launched

命令行工具

PhoneGap

Android

Cordova

Eclipse

我尝试使用Hello World应用程序，但模拟器在Android开始屏幕闪烁后冻结。主页不显示。控制台上的最后一个显示是正在等待启动主页('android.process.acore') ...我再次尝试重新安装Eclipse和Android。它仍然不起作用。此外，控制台不会显示任何错误。日志cat有以下错误： 06...

问等待主页('android.process.acore')启动
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问等待主页('android.process.acore')启动EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问等待主页('android.process.acore')启动
EN