blocks|key|482798|text|您确定是使用ssh+url克隆的吗？|type|unstyled|depth|inlineStyleRanges|entityRanges|data|482799|源的url是url+=+https://Nicolas_Raoul@bitbucket.org/Nicolas_Raoul/therepo.git，所以如果它使用https，它将要求输入密码，而不管您的ssh密钥是什么。|offset|length|style|CODE|482800|因此，您要做的是：|482801|在当前存储库中打开配置文件。|482802|vim+.git/config|482803|中的url更改行|482804|[remote+"origin"]
++++++++fetch+=+%2Brefs/heads/*:refs/remotes/origin/*
++++++++url+=+https://Nicolas_Raoul@bitbucket.org/Nicolas_Raoul/therepo.git|code-block|syntax|javascript|482805|至|482806|[remote+"origin"]
++++++++fetch+=+%2Brefs/heads/*:refs/remotes/origin/*
++++++++url+=+git@bitbucket.org:Nicolas_Raoul/therepo.git|482807|entityMap^0|0|6|1V|0|0|0|0|F|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|10|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|11|8|@$D|12|E|13|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|14|8|@]|9|@]|A|$]]|$1|J|3|K|5|6|7|15|8|@]|9|@]|A|$]]|$1|L|3|M|5|6|7|16|8|@$D|17|E|18|F|G]]|9|@]|A|$]]|$1|N|3|O|5|6|7|19|8|@]|9|@]|A|$]]|$1|P|3|Q|5|R|7|1A|8|@]|9|@]|A|$S|T]]|$1|U|3|V|5|6|7|1B|8|@]|9|@]|A|$]]|$1|W|3|X|5|R|7|1C|8|@]|9|@]|A|$S|T]]|$1|Y|3|-4|5|6|7|1D|8|@]|9|@]|A|$]]]|Z|$]]

Are you sure you cloned it using the ssh url?

The url for origin says <code>url = https://Nicolas_Raoul@bitbucket.org/Nicolas_Raoul/therepo.git</code> so if it is using https it will ask for password irrespective of your ssh keys.

So what you want to do is the following:

open your config file in your current repo ..

<code>vim .git/config</code>

and change the line with the url from

<pre><code>[remote "origin"]
 fetch = +refs/heads/*:refs/remotes/origin/*
 url = https://Nicolas_Raoul@bitbucket.org/Nicolas_Raoul/therepo.git
</code></pre>

to 

<pre><code>[remote "origin"]
 fetch = +refs/heads/*:refs/remotes/origin/*
 url = git@bitbucket.org:Nicolas_Raoul/therepo.git
</code></pre>

blocks|key|482834|text|在HTTP请求的情况下，也可以将凭据(带有密码)直接粘贴到url中：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|482835|http://username:password@bitbucket.org/...|code-block|syntax|javascript|482836|这将省去每次提供凭据的痛苦。只需修改.git/config+(+url)即可。|482837|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

In the HTTP request case, it is also and alternatively possible to paste the credentials (with password) directly into the url:

<pre><code>http://username:password@bitbucket.org/...
</code></pre>

This will save the pain to give your credentials every times again. Simple modify your .git/config (the url).

blocks|key|482868|text|上面已经回答了这个问题。我将总结上面要检查的步骤。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|482869|在项目目录中运行git+remote+-v。如果输出显示远程url以https://abc开头，那么您可能每次都需要用户名和密码。|offset|length|style|CODE|482870|因此，要更改远程url，请运行git+remote+set-url+origin+{ssh+remote+url+address+starts+with+mostly+git@bitbucket.org:}。|482871|现在运行git+remote+-v来验证更改后的远程url。|482872|参考：https://help.github.com/articles/changing-a-remote-s-url/|482873|entityMap|0|LINK|mutability|MUTABLE|url|https://help.github.com/articles/changing-a-remote-s-url/^0|0|8|D|Y|B|0|F|2G|0|4|D|0|3|1L|0|0^^$0|@$1|2|3|4|5|6|7|V|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|W|8|@$D|X|E|Y|F|G]|$D|Z|E|10|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|11|8|@$D|12|E|13|F|G]]|9|@]|A|$]]|$1|J|3|K|5|6|7|14|8|@$D|15|E|16|F|G]]|9|@]|A|$]]|$1|L|3|M|5|6|7|17|8|@]|9|@$D|18|E|19|1|1A]]|A|$]]|$1|N|3|-4|5|6|7|1B|8|@]|9|@]|A|$]]]|O|$P|$5|Q|R|S|A|$T|U]]]]

Its already answered above. I will summarise the steps to check above.

run <code>git remote -v</code> in project dir. If the output shows remote url starting with <code>https://abc</code> then you may need username password everytime.

So to change the remote url run <code>git remote set-url origin {ssh remote url address starts with mostly git@bitbucket.org:}</code>.

Now run <code>git remote -v</code> to verify the changed remote url.

Refer : <a href="https://help.github.com/articles/changing-a-remote-s-url/" rel="noreferrer">https://help.github.com/articles/changing-a-remote-s-url/</a>

blocks|key|482933|text|您可能需要仔细检查您的SSH身份文件。您可能正在引导BitBucket查看与您在BitBucket上保存的等效公钥不同/不正确的私钥。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|482934|使用tail+~/.ssh/config进行检查-您将看到类似以下内容：|offset|length|style|CODE|482935|Host+bitbucket.org
+HostName+bitbucket.org
+IdentityFile+~/.ssh/personal-bitbucket-ssh-key|code-block|syntax|javascript|482936|请记住，添加其他身份(如工作和家庭)可以使用ssh-add命令来完成，例如：|482937|ssh-keygen+-t+rsa+-C+"companyName"+-f+"companyName"
ssh-add+~/.ssh/companyName|482938|一旦确认了本地查看的是哪个私钥，您就可以获取您的公钥，在本例中为：|482939|cat+~/.ssh/personal-bitbucket-ssh-key.pub+%7C+pbcopy|482940|然后把密码粘贴到BitBucket上。你的git推送现在将被允许(假设你使用的是前面提到的SSH克隆)而不需要密码，因为你的设备是公认的友好设备。|482941|希望这能帮助某些人澄清这一点。|482942|entityMap^0|0|2|I|0|0|M|7|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|10|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|11|8|@$D|12|E|13|F|G]]|9|@]|A|$]]|$1|H|3|I|5|J|7|14|8|@]|9|@]|A|$K|L]]|$1|M|3|N|5|6|7|15|8|@$D|16|E|17|F|G]]|9|@]|A|$]]|$1|O|3|P|5|J|7|18|8|@]|9|@]|A|$K|L]]|$1|Q|3|R|5|6|7|19|8|@]|9|@]|A|$]]|$1|S|3|T|5|J|7|1A|8|@]|9|@]|A|$K|L]]|$1|U|3|V|5|6|7|1B|8|@]|9|@]|A|$]]|$1|W|3|X|5|6|7|1C|8|@]|9|@]|A|$]]|$1|Y|3|-4|5|6|7|1D|8|@]|9|@]|A|$]]]|Z|$]]

You may need to double-check your SSH identities file. You may be guiding BitBucket to look at a different/incorrect private key to the equivalent public key that you have saved on BitBucket.

Check it with <code>tail ~/.ssh/config</code> - you will see something similar to:

<pre><code>Host bitbucket.org
 HostName bitbucket.org
 IdentityFile ~/.ssh/personal-bitbucket-ssh-key
</code></pre>

Remember, that adding additional identities (such as work and home) can be done with the <code>ssh-add</code> command, for example:

<pre><code>ssh-keygen -t rsa -C "companyName" -f "companyName"
ssh-add ~/.ssh/companyName
</code></pre>

Once you have confirmed which private key is being looked at locally, you can then take your public equivalent, in this case:

<pre><code>cat ~/.ssh/personal-bitbucket-ssh-key.pub | pbcopy
</code></pre>

And paste that cipher onto BitBucket. Your git pushes will now (provided you are using the SSH clone as aforementioned answers have pointed out) be allowed without a password, as your device is a recognised friendly.

Hopefully this helps clear it up for someone.

blocks|key|698871|text|大家好，来自未来的谷歌人。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|698872|在MacOS+>=高SSH上，KeyChain密钥不再保存到because+of+reasons。|offset|length|698873|使用ssh-add+-K也无法在重启中幸存下来。|style|CODE|698874|这里是3+possible+solutions。|698875|我已经成功地使用了第一种方法。我在~/.ssh中创建了一个名为config的文件|698876|Host+*
++AddKeysToAgent+yes
++UseKeychain+yes
++IdentityFile+~/.ssh/id_rsa|code-block|syntax|javascript|698877|entityMap|0|LINK|mutability|MUTABLE|url|https://jira.atlassian.com/browse/SRCTREE-4499|1|https://github.com/jirsbek/SSH-keys-in-macOS-Sierra-keychain^0|0|U|I|0|0|2|A|0|3|K|1|0|H|6|V|6|0|0^^$0|@$1|2|3|4|5|6|7|12|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|13|8|@]|9|@$D|14|E|15|1|16]]|A|$]]|$1|F|3|G|5|6|7|17|8|@$D|18|E|19|H|I]]|9|@]|A|$]]|$1|J|3|K|5|6|7|1A|8|@]|9|@$D|1B|E|1C|1|1D]]|A|$]]|$1|L|3|M|5|6|7|1E|8|@$D|1F|E|1G|H|I]|$D|1H|E|1I|H|I]]|9|@]|A|$]]|$1|N|3|O|5|P|7|1J|8|@]|9|@]|A|$Q|R]]|$1|S|3|-4|5|6|7|1K|8|@]|9|@]|A|$]]]|T|$U|$5|V|W|X|A|$Y|Z]]|10|$5|V|W|X|A|$Y|11]]]]

Hello Googlers from the future.

On MacOS >= High Sierra, the SSH key is no longer saved to the KeyChain <a href="https://jira.atlassian.com/browse/SRCTREE-4499" rel="noreferrer">because of reasons</a>.

Using <code>ssh-add -K</code> no longer survives restarts as well.

Here are <a href="https://github.com/jirsbek/SSH-keys-in-macOS-Sierra-keychain" rel="noreferrer">3 possible solutions</a>. 

I've used the first method successfully. I've created a file called <code>config</code> in <code>~/.ssh</code>:

<pre><code>Host *
 AddKeysToAgent yes
 UseKeychain yes
 IdentityFile ~/.ssh/id_rsa
</code></pre>

blocks|key|483086|text|对于我来说，尽管我运行了'git+clone+ssh://git@stash.xxx.com:7999/projName/projA.git‘，我仍然被提示为我克隆的这个新的存储库输入密码，所以通过将它的.git/config文件与其他可用的存储库进行比较，它原来是远程“源”部分下的url，它被设置为上面的新存储库的ssh路径，但对于正在运行的存储库，它被设置为https:xxx。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|483087|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

With me, although I ran 'git clone ssh://git@stash.xxx.com:7999/projName/projA.git'
I was still being prompted for password for this new repo that I cloned, so by comparing its .git/config file to other repos that work, It turned out to be the url under the [remote "origin"] section, it was set to the ssh path above for the new repo, but was set to https:xxx for the working one.

blocks|key|699020|text|我在登录时还有其他奇怪的地方。我遇到了一些看起来完全愚蠢但在我的情况下有效的东西。只需转到MacOS的keychain即可。在侧边栏中找到登录锁图标。单击它以注销，然后单击以登录。听起来很傻，但它解决了我的问题。值得一试。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|699021|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I was having other weirdness around logging in. I came across something that seemed totally dumb but worked in my case. Simply go to MacOS's keychain. Find the login lock icon in the sidebar. Click it to logout and then click to login. Sounds dumb but it solved my issues. Worth a shot.

blocks|key|483277|text|我使用HTTPS+URL而不是SSH+URL克隆了存储库，因此，即使在添加了SSH密钥之后，它仍然要求我在Bash+Shell上输入密码。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|483278|我刚刚编辑了./.git/config文件，并通过简单地将https://替换为ssh://来更改url变量的值|offset|length|style|CODE|483279|例如。|483280|[core]
++++++++...
++++++++...
++++++++...
[remote+"origin"]
++++++++url+=+https://<username>@bitbucket.org/<username>/<repository_name>.git
++++++++fetch+=+%2Brefs/heads/*:refs/remotes/origin/*
++++++++...
++++++++...
++++++++...|code-block|syntax|javascript|483281|更改为：|483282|[core]
++++++++...
++++++++...
++++++++...
[remote+"origin"]
++++++++url+=+ssh://<username>@bitbucket.org/<username>/<repository_name>.git
++++++++fetch+=+%2Brefs/heads/*:refs/remotes/origin/*
++++++++...
++++++++...
++++++++...|483283|entityMap^0|0|6|D|T|8|14|6|1D|3|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|V|8|@$D|W|E|X|F|G]|$D|Y|E|Z|F|G]|$D|10|E|11|F|G]|$D|12|E|13|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|14|8|@]|9|@]|A|$]]|$1|J|3|K|5|L|7|15|8|@]|9|@]|A|$M|N]]|$1|O|3|P|5|6|7|16|8|@]|9|@]|A|$]]|$1|Q|3|R|5|L|7|17|8|@]|9|@]|A|$M|N]]|$1|S|3|-4|5|6|7|18|8|@]|9|@]|A|$]]]|T|$]]

I cloned the repository with HTTPS URL instead of SSH URL hence even after adding the SSH Key it was asking me for password on Bash Shell.

I just edited the <code>./.git/config</code> file and changed the value of <code>url</code> variable by simply replacing the <code>https://</code> to <code>ssh://</code>

E.g.

<pre><code>[core]
 ...
 ...
 ...
[remote "origin"]
 url = https://&lt;username&gt;@bitbucket.org/&lt;username&gt;/&lt;repository_name&gt;.git
 fetch = +refs/heads/*:refs/remotes/origin/*
 ...
 ...
 ...
</code></pre>

Changed to:

<pre><code>[core]
 ...
 ...
 ...
[remote "origin"]
 url = ssh://&lt;username&gt;@bitbucket.org/&lt;username&gt;/&lt;repository_name&gt;.git
 fetch = +refs/heads/*:refs/remotes/origin/*
 ...
 ...
 ...
</code></pre>

blocks|key|699181|text|我用我的用户名而不是电子邮件登录，它开始工作了。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|699182|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I logged in using my username instead of email and it started working.

blocks|key|483397|text|如果您使用的是Ubuntu系统，请使用以下内容永久存储密码：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|483398|git+config+--global+credential.helper+store|code-block|syntax|javascript|483399|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

If you are using a Ubuntu system, use the following to Store Password Permanently:
<pre><code>git config --global credential.helper store
</code></pre>

blocks|key|699322|text|如果您仍然收到too+many+authentication+failures错误：|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|699323|nano+~/.ssh/config|code-block|syntax|javascript|699324|然后粘贴：|699325|Host+bitbucket_james
++++HostName+bitbucket.org
++++User+james
++++Port+22
++++IdentitiesOnly=yes
++++IdentityFile=~/.ssh/id_rsa_bitbucket_james|699326|最重要的是-当你设置远程网址时，你应该使用bitbucket_james别名而不是bitbucket.org：|699327|git+remote+set-url+origin+git@bitbucket_james:repo_owner_user/repo_name.git|699328|entityMap^0|7|W|0|0|0|0|L|F|15|D|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@$9|V|A|W|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|X|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|Y|8|@]|D|@]|E|$]]|$1|M|3|N|5|H|7|Z|8|@]|D|@]|E|$I|J]]|$1|O|3|P|5|6|7|10|8|@$9|11|A|12|B|C]|$9|13|A|14|B|C]]|D|@]|E|$]]|$1|Q|3|R|5|H|7|15|8|@]|D|@]|E|$I|J]]|$1|S|3|-4|5|6|7|16|8|@]|D|@]|E|$]]]|T|$]]

If you still get <code>too many authentication failures</code> errors:
<pre class="lang-sh prettyprint-override"><code>nano ~/.ssh/config
</code></pre>
And paste:
<pre><code>Host bitbucket_james
 HostName bitbucket.org
 User james
 Port 22
 IdentitiesOnly=yes
 IdentityFile=~/.ssh/id_rsa_bitbucket_james
</code></pre>
And most important - you should <code>bitbucket_james</code> alias instead of <code>bitbucket.org</code> when you set up your remote URL:
<pre class="lang-sh prettyprint-override"><code>git remote set-url origin git@bitbucket_james:repo_owner_user/repo_name.git
</code></pre>

I uploaded my <code>~/.ssh/id_rsa.pub</code> to <a href="https://bitbucket.org/account/ssh-keys/" rel="noreferrer">Bitbucket's SSH keys</a> as <a href="https://confluence.atlassian.com/bitbucket/use-the-ssh-protocol-with-bitbucket-cloud-221449711.html" rel="noreferrer">explained</a>, but Git still asks me for my password at every operation (such as <code>git pull</code>). Did I miss something?

It is a private repository (fork of another person's private repository) and I cloned it like this:

<pre><code>git clone git@bitbucket.org:Nicolas_Raoul/therepo.git
</code></pre>

Here is my local <code>.git/config</code>:

<pre><code>[core]
 repositoryformatversion = 0
 filemode = true
 bare = false
 logallrefupdates = true
[remote "origin"]
 fetch = +refs/heads/*:refs/remotes/origin/*
 url = https://Nicolas_Raoul@bitbucket.org/Nicolas_Raoul/therepo.git
[branch "master"]
 remote = origin
 merge = refs/heads/master
</code></pre>

In the same environment with the same public key, Git on Github works fine. 
<code>.ssh</code> is <code>rwx------</code>, <code>.ssh/id_rsa</code> is <code>-rw-------</code>, <code>.ssh/id_rsa.pub</code> is <code>-rw-r--r--</code>

Git on Bitbucket: Always asked for password, even after uploading my public SSH key

Ubuntu

MacOS

我将我的~/.ssh/id_rsa.pub作为上传到了上，但每次操作(比如git pull)时，Git还是会要求我提供密码。我错过了什么吗？它是一个私有存储库(另一个人的私有存储库的分支)，我是这样克隆它的：git clone git@bitbucket.org:Nicolas_Raoul/therepo.git这是我...

问Bitbucket上的Git :总是要求提供密码，即使在上传我的公共SSH密钥之后也是如此
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Bitbucket上的Git :总是要求提供密码，即使在上传我的公共SSH密钥之后也是如此EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Bitbucket上的Git :总是要求提供密码，即使在上传我的公共SSH密钥之后也是如此
EN