blocks|key|4713949|text|我认为你可能误解了git设计的工作流程。(为了澄清/纠正我在评论中的意思，你不需要git+add+.，因为commit+-a通常服务于相同的目的-如果文件已经添加，则添加任何尚未暂存的更改)|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|4713950|通常，您将执行以下操作：|4713951|#+make+some+changes
$+git+commit+-a+-m+"Changed+something"
#+make+some+more+changes
$+git+commit+-a+-m+"Changed+something+else"|code-block|syntax|javascript|4713952|清洗，冲洗，重复，直到你完成了特征X，或者你在一个停止点，或者你只是想让其他人看到你所做的事情。然后你就做了|4713953|$+git+push|4713954|Git不是SVN+--但看起来您正试图这样使用它。您可能会在文章here的末尾找到一些有用的参考资料。|4713955|entityMap|0|LINK|mutability|MUTABLE|url|http://www.ibm.com/developerworks/library/l-git-subversion-1/^0|15|9|1H|9|0|0|0|0|0|W|4|0|0^^$0|@$1|2|3|4|5|6|7|10|8|@$9|11|A|12|B|C]|$9|13|A|14|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|15|8|@]|D|@]|E|$]]|$1|H|3|I|5|J|7|16|8|@]|D|@]|E|$K|L]]|$1|M|3|N|5|6|7|17|8|@]|D|@]|E|$]]|$1|O|3|P|5|J|7|18|8|@]|D|@]|E|$K|L]]|$1|Q|3|R|5|6|7|19|8|@]|D|@$9|1A|A|1B|1|1C]]|E|$]]|$1|S|3|-4|5|6|7|1D|8|@]|D|@]|E|$]]]|T|$U|$5|V|W|X|E|$Y|Z]]]]

I think you might misunderstand the workflow that git was designed for. (To clarify/correct what I meant in the comment, you don't need the <code>git add .</code>, since <code>commit -a</code> usually serves the same purpose - adding any changes that have not yet been staged, if the files have already been added)

Typically you'll do something like this:

<pre><code># make some changes
$ git commit -a -m "Changed something"
# make some more changes
$ git commit -a -m "Changed something else"
</code></pre>

wash, rinse, repeat, until you've finished feature X, or you're at a stopping point, or you just want other people to see what you've done. Then you do

<pre><code>$ git push
</code></pre>

Git is not SVN - but it appears that you're trying to use it as such. You might find some of the resources at the end of the article <a href="http://www.ibm.com/developerworks/library/l-git-subversion-1/">here</a> to be of some use.

blocks|key|4713999|text|如果文件已经被跟踪，那么您不需要运行git+add，您可以简单地编写git+commit+-am+'your+message'|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|4714000|如果您不想编写提交消息，可以考虑这样做|4714001|git+commit+--allow-empty-message+-am+''|4714002|entityMap^0|I|7|Y|T|0|0|0|13|0^^$0|@$1|2|3|4|5|6|7|L|8|@$9|M|A|N|B|C]|$9|O|A|P|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|Q|8|@]|D|@]|E|$]]|$1|H|3|I|5|6|7|R|8|@$9|S|A|T|B|C]]|D|@]|E|$]]|$1|J|3|-4|5|6|7|U|8|@]|D|@]|E|$]]]|K|$]]

If the file is already being tracked then you do not need to run <code>git add</code>, you can simply write <code>git commit -am 'your message'</code>

If you do not want to write a commit message you might consider doing something like

<code>git commit --allow-empty-message -am ''</code>

blocks|key|207988|text|在bash中设置为别名：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|207989|$+alias+lazygit="git+add+.;+git+commit+-a+-m+'...';+git+push;";|code-block|syntax|javascript|207990|就叫它：|207991|$+lazygit|207992|(要使此别名永久存在，您必须将其包含在.bashrc或.bash_profile中)|207993|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Q|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|R|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|S|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

Set as an alias in bash:

<pre><code>$ alias lazygit="git add .; git commit -a -m '...'; git push;";
</code></pre>

Call it:

<pre><code>$ lazygit
</code></pre>

(To make this alias permanent, you'd have to include it in your .bashrc or .bash_profile)

blocks|key|208042|text|基于@Gavin的答案：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|208043|将lazygit设置为函数而不是别名允许您向其传递参数。我已经将以下内容添加到我的.bashrc+(如果是Mac，则为.bash_profile+)：|208044|function+lazygit()+{
++++git+add+.
++++git+commit+-a+-m+"$1"
++++git+push
}|code-block|syntax|javascript|208045|这允许您提供提交消息，例如|208046|lazygit+"My+commit+msg"|208047|当然，您可以通过接受更多的参数来进一步强化这一点，例如推送到哪个远程位置，或者哪个分支。|208048|entityMap^0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|R|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|S|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|T|8|@]|9|@]|A|$]]|$1|K|3|L|5|F|7|U|8|@]|9|@]|A|$G|H]]|$1|M|3|N|5|6|7|V|8|@]|9|@]|A|$]]|$1|O|3|-4|5|6|7|W|8|@]|9|@]|A|$]]]|P|$]]

Building off of @Gavin's answer:

Making lazygit a function instead of an alias allows you to pass it an argument. I have added the following to my .bashrc (or .bash_profile if Mac):

<pre><code>function lazygit() {
 git add .
 git commit -a -m "$1"
 git push
}
</code></pre>

This allows you to provide a commit message, such as 

<pre><code>lazygit "My commit msg"
</code></pre>

You could of course beef this up even more by accepting even more arguments, such as which remote place to push to, or which branch.

blocks|key|208065|text|您可以使用bash脚本，设置别名来启动任何命令或一组命令|type|unstyled|depth|inlineStyleRanges|entityRanges|data|208066|git+commit+-am+"your+message"+&&+git+push+|code-block|syntax|javascript|208067|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

You can use bash script , set alias to launch any command or group of commands

<pre><code>git commit -am "your message" &amp;&amp; git push 
</code></pre>

blocks|key|208099|text|我在我的.bash_profile中使用了这个|type|unstyled|depth|inlineStyleRanges|entityRanges|data|208100|gitpush()+{
++++git+add+.
++++git+commit+-m+"$*"
++++git+push
}
alias+gp=gitpush|code-block|syntax|javascript|208101|它的执行方式如下|208102|gp+A+really+long+commit+message|208103|别忘了在保存别名后运行source+~/.bash_profile。|offset|length|style|CODE|208104|entityMap^0|0|0|0|0|B|M|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|T|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|U|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|V|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|W|8|@$M|X|N|Y|O|P]]|9|@]|A|$]]|$1|Q|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|R|$]]

I use this in my .bash_profile

<pre><code>gitpush() {
 git add .
 git commit -m "$*"
 git push
}
alias gp=gitpush
</code></pre>

It executes like

<pre><code>gp A really long commit message
</code></pre>

Don't forget to run <code>source ~/.bash_profile</code> after saving the alias.

blocks|key|208149|text|我最终向我的.gitconfig文件添加了一个别名：|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|208150|[alias]
++++cmp+=+"!f()+{+git+add+-A+&&+git+commit+-m+\"$@\"+&&+git+push;+};+f"|code-block|syntax|javascript|208151|用法：git+cmp+"Long+commit+message+goes+here"|208152|添加所有文件，然后使用提交消息的注释并将其推送到源位置。|208153|我认为这是一个更好的解决方案，因为您可以控制提交消息是什么。|208154|也可以从命令行定义别名，这会将其添加到.gitconfig中|208155|git+config+--global+alias.cmp+'!f()+{+git+add+-A+&&+git+commit+-m+"$@"+&&+git+push;+};+f'|208156|entityMap^0|6|A|0|0|3|13|0|0|0|J|A|0|0^^$0|@$1|2|3|4|5|6|7|W|8|@$9|X|A|Y|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|Z|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|10|8|@$9|11|A|12|B|C]]|D|@]|E|$]]|$1|M|3|N|5|6|7|13|8|@]|D|@]|E|$]]|$1|O|3|P|5|6|7|14|8|@]|D|@]|E|$]]|$1|Q|3|R|5|6|7|15|8|@$9|16|A|17|B|C]]|D|@]|E|$]]|$1|S|3|T|5|H|7|18|8|@]|D|@]|E|$I|J]]|$1|U|3|-4|5|6|7|19|8|@]|D|@]|E|$]]]|V|$]]

I ended up adding an alias to my <code>.gitconfig</code> file:

<pre><code>[alias]
 cmp = "!f() { git add -A &amp;&amp; git commit -m \"$@\" &amp;&amp; git push; }; f"
</code></pre>

Usage: <code>git cmp "Long commit message goes here"</code>

Adds all files, then uses the comment for the commit message and pushes it up to origin.

I think it's a better solution because you have control over what the commit message is.

The alias can be also defined from command line, this adds it to your <code>.gitconfig</code>:

<pre><code>git config --global alias.cmp '!f() { git add -A &amp;&amp; git commit -m "$@" &amp;&amp; git push; }; f'
</code></pre>

blocks|key|4714190|text|我使用批处理文件：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4714191|@ECHO+OFF
SET+/p+comment=Comment:
git+add+*
git+commit+-a+-m+"%25comment%25"
git+push|code-block|syntax|javascript|4714192|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

I use a batch file:

<pre><code>@ECHO OFF
SET /p comment=Comment:
git add *
git commit -a -m "%comment%"
git push
</code></pre>

blocks|key|4714234|text|当您想要git+commit的svn式行为时，可以在.gitconfig中的git别名中使用它。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4714235|commit+=+"!f()+{+git+commit+\"$@\"+&&+git+push;+};f"|offset|length|style|CODE|4714236|entityMap^0|0|0|1G|0^^$0|@$1|2|3|4|5|6|7|J|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|K|8|@$D|L|E|M|F|G]]|9|@]|A|$]]|$1|H|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|I|$]]

When you want svn-like behavior of git commit, use this in your git aliases in your .gitconfig

<code>commit = "!f() { git commit \"$@\" &amp;&amp; git push; };f"</code>

blocks|key|208207|text|我为命令编写了这个.sh脚本|type|unstyled|depth|inlineStyleRanges|entityRanges|data|208208|#!/bin/sh
cd+LOCALDIRECTORYNAME/++
git+config+--global+user.email+"YOURMAILADDRESS"
git+config+--global+user.name+"YOURUSERNAME"
git+init
git+status
git+add+-A+&&+git+commit+-m+"MASSAGEFORCOMMITS"
git+push+origin+master|code-block|syntax|javascript|208209|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

I did this .sh script for command 

<pre><code>#!/bin/sh
cd LOCALDIRECTORYNAME/ 
git config --global user.email "YOURMAILADDRESS"
git config --global user.name "YOURUSERNAME"
git init
git status
git add -A &amp;&amp; git commit -m "MASSAGEFORCOMMITS"
git push origin master
</code></pre>

blocks|key|208242|text|由于问题没有指定是哪个shell，因此这里是基于先前答案的eshell版本。这放在eshell别名文件中，它可能在~/.emacs.d/eshell/alias中我已经添加了第一部分z+https://github.com/rupa/z/，它可以让你快速cd到一个目录中，所以无论你当前的目录是什么，它都可以运行。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|208243|alias+census+z+cens;+git+add+.;+git+commit+-m+"fast";+git+push|code-block|syntax|javascript|208244|entityMap|0|LINK|mutability|MUTABLE|url|https://github.com/rupa/z/^0|2L|Q|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@$A|R|B|S|1|T]]|C|$]]|$1|D|3|E|5|F|7|U|8|@]|9|@]|C|$G|H]]|$1|I|3|-4|5|6|7|V|8|@]|9|@]|C|$]]]|J|$K|$5|L|M|N|C|$O|P]]]]

Since the question doesn't specify which shell, here's the eshell version based on the earlier answers. This goes in the eshell alias file, which might be in ~/.emacs.d/eshell/alias I've added the first part z <a href="https://github.com/rupa/z/" rel="nofollow noreferrer">https://github.com/rupa/z/</a> which let's you quickly cd to a directory, so that this can be run no matter what your current directory is.

<pre><code>alias census z cens; git add .; git commit -m "fast"; git push
</code></pre>

blocks|key|4714320|text|添加~/.bash_profile，通过一个命令put完成添加、提交和推送操作：|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|4714321|function+g()+{+git+commit+-a+-m+"$*";+git+push;+}|code-block|syntax|javascript|4714322|用法：|4714323|g+your+commit+message
g+your+commit+message+'message'|4714324|不需要引号，尽管您不能在提交消息中使用分号或括号(允许使用单引号)。如果你想要其中的任何一个，只需在你的消息中加双引号，例如：|4714325|g+"your+commit+message;+(message)"|4714326|要在邮件中创建评论，请执行以下操作：|4714327|g+"your+commit+message:
>+your+note"|4714328|还有一个以类似的方式添加和提交的函数：|4714329|function+c()+{+git+add+--all;+git+commit+-m+"$*";+}|4714330|与g的工作方式完全相同，并且具有相同的约束。只需放入c即可。例如。|4714331|c+your+commit+message|4714332|您也可以添加别名推送到遥控器：|4714333|alias+p='git+push'|4714334|4714335|p|4714336|这相当于两个字母，c和p，您可以在使用git存储库时使用它们。或者，您也可以使用g，只需一个字母即可完成所有操作。|4714337|别名和函数的完整列表：https://gist.github.com/matt360/0c5765d6f0579a5aa74641bc47ae50ac|4714338|entityMap|0|LINK|mutability|MUTABLE|url|https://gist.github.com/matt360/0c5765d6f0579a5aa74641bc47ae50ac^0|2|F|0|0|0|0|0|0|0|0|0|0|1|1|Q|1|0|0|0|0|0|0|9|1|B|1|14|1|0|B|1S|0|0^^$0|@$1|2|3|4|5|6|7|1N|8|@$9|1O|A|1P|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|1Q|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|1R|8|@]|D|@]|E|$]]|$1|M|3|N|5|H|7|1S|8|@]|D|@]|E|$I|J]]|$1|O|3|P|5|6|7|1T|8|@]|D|@]|E|$]]|$1|Q|3|R|5|H|7|1U|8|@]|D|@]|E|$I|J]]|$1|S|3|T|5|6|7|1V|8|@]|D|@]|E|$]]|$1|U|3|V|5|H|7|1W|8|@]|D|@]|E|$I|J]]|$1|W|3|X|5|6|7|1X|8|@]|D|@]|E|$]]|$1|Y|3|Z|5|H|7|1Y|8|@]|D|@]|E|$I|J]]|$1|10|3|11|5|6|7|1Z|8|@$9|20|A|21|B|C]|$9|22|A|23|B|C]]|D|@]|E|$]]|$1|12|3|13|5|H|7|24|8|@]|D|@]|E|$I|J]]|$1|14|3|15|5|6|7|25|8|@]|D|@]|E|$]]|$1|16|3|17|5|H|7|26|8|@]|D|@]|E|$I|J]]|$1|18|3|L|5|6|7|27|8|@]|D|@]|E|$]]|$1|19|3|1A|5|H|7|28|8|@]|D|@]|E|$I|J]]|$1|1B|3|1C|5|6|7|29|8|@$9|2A|A|2B|B|C]|$9|2C|A|2D|B|C]|$9|2E|A|2F|B|C]]|D|@]|E|$]]|$1|1D|3|1E|5|6|7|2G|8|@]|D|@$9|2H|A|2I|1|2J]]|E|$]]|$1|1F|3|-4|5|6|7|2K|8|@]|D|@]|E|$]]]|1G|$1H|$5|1I|1J|1K|E|$1L|1M]]]]

Add in <code>~/.bash_profile</code> for adding, committing and pushing with one command put:

<pre><code>function g() { git commit -a -m "$*"; git push; }
</code></pre>

Usage:

<pre><code>g your commit message
g your commit message 'message'
</code></pre>

No quotes are needed although you can't use semicolons or parenthesis in your commit messages (single quotes are allowed). If you want to any of these just simply put double quotes in you message, e.g.:

<pre><code>g "your commit message; (message)"
</code></pre>

To create a comment in your message do:

<pre><code>g "your commit message:
&gt; your note"
</code></pre>

There's also a function for adding and committing in a similar way:

<pre><code>function c() { git add --all; git commit -m "$*"; }
</code></pre>

Works exactly the same way that <code>g</code> function and has the same constraints. Just put <code>c</code> instead.
E.g.

<pre><code>c your commit message
</code></pre>

You can also add an alias for pushing to the remote:

<pre><code>alias p='git push'
</code></pre>

Usage:

<pre><code>p
</code></pre>

That amounts into 2 letters, <code>c</code> and <code>p</code> you use while working with your git repository. Or you can use <code>g</code> instead to do it all with only one letter.

Full list of aliases and functions:
<a href="https://gist.github.com/matt360/0c5765d6f0579a5aa74641bc47ae50ac" rel="nofollow noreferrer">https://gist.github.com/matt360/0c5765d6f0579a5aa74641bc47ae50ac</a>

blocks|key|4714369|text|在lazygit答案的基础上，下面的解决方案添加了一个用户检查，以在推送之前验证更改。如果取消，它将恢复命令。当且仅当本地存储库中有更改时，才会发生所有这些情况。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|4714370|###+SAFER+LAZY+GIT
function+lazygit()+{
++git+add+.
++if+git+commit+-a+-m+"$1";+then
++++read+-r+-p+"Are+you+sure+you+want+to+push+these+changes?+[y/N]}+"+response
++++case+"$response"+in
++++++[yY][eE][sS]%7C[yY])
++++++++git+push
++++++++;;
++++++*)
++++++++git+reset+HEAD~1+--soft
++++++++echo+"Reverted+changes."
++++++++;;
++++esac
++fi
}|code-block|syntax|javascript|4714371|entityMap|0|LINK|mutability|MUTABLE|url|https://stackoverflow.com/a/23328996/1071884^0|1|7|1|7|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@$9|T|A|U|B|C]]|D|@$9|V|A|W|1|X]]|E|$]]|$1|F|3|G|5|H|7|Y|8|@]|D|@]|E|$I|J]]|$1|K|3|-4|5|6|7|Z|8|@]|D|@]|E|$]]]|L|$M|$5|N|O|P|E|$Q|R]]]]

Building off the <a href="https://stackoverflow.com/a/23328996/1071884"><code>lazygit</code></a> answer, the following solution adds a user check to verify the changes before pushing. It will revert the commands if cancelled. And all that will happen if and only if there are changes in the local repo.

<pre><code>### SAFER LAZY GIT
function lazygit() {
 git add .
 if git commit -a -m "$1"; then
 read -r -p "Are you sure you want to push these changes? [y/N]} " response
 case "$response" in
 [yY][eE][sS]|[yY])
 git push
 ;;
 *)
 git reset HEAD~1 --soft
 echo "Reverted changes."
 ;;
 esac
 fi
}
</code></pre>

blocks|key|208316|text|如果您正在使用fish+shell+(基于btse的答案构建)：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|208317|在'~/.config/fish/functions‘中将此文件另存为'quickgit.fish’。如果该目录不存在，请创建该目录。'--+git+-dir=$PWD/.git‘确保我们对调用函数的git项目运行git命令|208318|function+quickgit+#+This+is+the+function+name+and+command+we+call
++++git+--git-dir=$PWD/.git+add+.+#+Stage+all+unstaged+files
++++git+--git-dir=$PWD/.git+commit+-a+-m+$argv+#+Commit+files+with+the+given+argument+as+the+commit+message
++++git+--git-dir=$PWD/.git+push+#+Push+to+remote
end|code-block|syntax|javascript|208319|重新启动终端，导航到项目，进行更改，现在您可以调用'quickgit+"example+message“。现在将添加、提交和推送更改:)。|208320|也可以在这里找到要点：https://gist.github.com/Abushawish/3440a6087c212bd67ce1e93f8d283a69|offset|length|208321|entityMap|0|LINK|mutability|MUTABLE|url|https://gist.github.com/Abushawish/3440a6087c212bd67ce1e93f8d283a69^0|0|0|0|0|B|1V|0|0^^$0|@$1|2|3|4|5|6|7|W|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|X|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|Y|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|Z|8|@]|9|@]|A|$]]|$1|K|3|L|5|6|7|10|8|@]|9|@$M|11|N|12|1|13]]|A|$]]|$1|O|3|-4|5|6|7|14|8|@]|9|@]|A|$]]]|P|$Q|$5|R|S|T|A|$U|V]]]]

If you're using fish shell (building off of btse's answer):

Save this file within '~/.config/fish/functions' as 'quickgit.fish'. Create the directory if it does not exist.
'--git-dir=$PWD/.git' Ensures that we run the git commands against the git project where we called the function

<pre><code>function quickgit # This is the function name and command we call
 git --git-dir=$PWD/.git add . # Stage all unstaged files
 git --git-dir=$PWD/.git commit -a -m $argv # Commit files with the given argument as the commit message
 git --git-dir=$PWD/.git push # Push to remote
end
</code></pre>

Restart terminal, navigate to project, make changes, and now you can call 'quickgit "example message"'.
Changes will now be added, committed, and push :).

Also can be found as a Gist here: <a href="https://gist.github.com/Abushawish/3440a6087c212bd67ce1e93f8d283a69" rel="nofollow noreferrer">https://gist.github.com/Abushawish/3440a6087c212bd67ce1e93f8d283a69</a>

blocks|key|208334|text|最简单的解决方案是：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|208335|git+commit+-a+-m+"commit"+&&+git+push|code-block|syntax|javascript|208336|git+add已经包含在提交的-a参数中，但如果需要，您可以将它们全部连接起来：|offset|length|style|CODE|208337|git+add+.+&&+git+commit+-a+-m+"commit"+&&+git+push|208338|entityMap^0|0|0|0|7|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|R|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|S|8|@$I|T|J|U|K|L]]|9|@]|A|$]]|$1|M|3|N|5|D|7|V|8|@]|9|@]|A|$E|F]]|$1|O|3|-4|5|6|7|W|8|@]|9|@]|A|$]]]|P|$]]

Simpliest solution would be to:

<pre><code>git commit -a -m "commit" &amp;&amp; git push
</code></pre>

<code>git add</code> is already contained in -a parameter of commit, but if you want you can connect them all:

<pre><code>git add . &amp;&amp; git commit -a -m "commit" &amp;&amp; git push
</code></pre>

blocks|key|208396|text|用以下几行编写一个名为gitpush.sh的小脚本，并将其添加到~目录中。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|208397|echo+$1
git+add+.
git+commit+-m+"$1"
git+push|code-block|syntax|javascript|208398|现在在~/.bashrc中添加一个别名，如下所示：|208399|alias+gitpush='~/gitpush'|208400|现在，在任何git库中，只需编写gitpush+"message“即可。|208401|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Q|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|R|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|S|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

Write a small script named gitpush.sh with below lines and add it your ~ directory. 

<pre><code>echo $1
git add .
git commit -m "$1"
git push
</code></pre>

Now add an alias in ~/.bashrc like below : 

<pre><code>alias gitpush='~/gitpush'
</code></pre>

Now from any git repository just write gitpush "message" .

blocks|key|208409|text|我喜欢运行以下命令：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|208410|git+commit+-am+"message";git+push|code-block|syntax|javascript|208411|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

I like to run the following:

<pre><code>git commit -am "message";git push
</code></pre>

blocks|key|4714542|text|我发现this+yolo别名很神奇，在我懒惰的时候，甚至可以向提交提交一个随机的评论。它开箱即用，所以我只需执行git+yolo，所有的更改都会自动推送。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|4714543|entityMap|0|LINK|mutability|MUTABLE|url|https://github.com/atongen/yolo^0|8|4|1K|8|3|4|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@$9|O|A|P|B|C]|$9|Q|A|R|B|C]]|D|@$9|S|A|T|1|U]]|E|$]]|$1|F|3|-4|5|6|7|V|8|@]|D|@]|E|$]]]|G|$H|$5|I|J|K|E|$L|M]]]]

I found <a href="https://github.com/atongen/yolo" rel="nofollow noreferrer">this</a> <code>yolo</code> alias to be amazing to even submit a random comment to the commit while I am being lazy. It works really well out of the box, so I just do <code>git yolo</code> and all my changes are pushed automatically.

blocks|key|4714571|text|如果你使用VSCode，你可以下载this扩展，它可以让你在一个简单的键盘快捷键中做到这一点。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|4714572|entityMap|0|LINK|mutability|MUTABLE|url|https://marketplace.visualstudio.com/items?itemName=alfredbirk.git-add-commit-push^0|H|4|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@$A|M|B|N|1|O]]|C|$]]|$1|D|3|-4|5|6|7|P|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]]]

If you use VSCode, you can download <a href="https://marketplace.visualstudio.com/items?itemName=alfredbirk.git-add-commit-push" rel="nofollow noreferrer">this</a> extension which will let you do it in one simple keyboard shortcut.

blocks|key|208480|text|在.bashrc中定义函数|type|unstyled|depth|inlineStyleRanges|entityRanges|data|208481|function+gitall()+{
++++file=${1:-.}
++++comment=${2:-update}
++++echo+$file
++++echo+$comment
++++git+add+$file+&&+git+commit+-m+'$comment'+&&+git+push+origin+master
}|code-block|syntax|javascript|208482|在你的终端|208483|gitall|208484|默认gitall将在当前git存储库中添加所有内容|208485|gitall+some-file-to-add+'update+file'|208486|将添加某些要更改的文件，并使用自定义提交消息|208487|entityMap^0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|T|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|U|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|V|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|W|8|@]|9|@]|A|$]]|$1|M|3|N|5|D|7|X|8|@]|9|@]|A|$E|F]]|$1|O|3|P|5|6|7|Y|8|@]|9|@]|A|$]]|$1|Q|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|R|$]]

define function in .bashrc

<pre><code>function gitall() {
 file=${1:-.}
 comment=${2:-update}
 echo $file
 echo $comment
 git add $file &amp;&amp; git commit -m '$comment' &amp;&amp; git push origin master
}
</code></pre>

in your terminal

<pre><code>gitall
</code></pre>

default gitall will add all in current git repo

<pre><code>gitall some-file-to-add 'update file'
</code></pre>

will add certain file to change, and use custom commit message

blocks|key|4714681|text|对于MAC+VSC用户，最佳设置为：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4714682|1)按'shift%2Bcmd%2BP‘并键入：|4714683|Shell+Command:+install+'code'+command+in+PATH|code-block|syntax|javascript|4714684|按ENTER+(这将安装代码命令以轻松访问bash_profile+)|4714685|2)现在可以运行：code+~/.bash_profile来打开空的bash_profile|offset|length|style|CODE|4714686|3)在其中输入一个新函数：|4714687|function+lazygit()+{
++++git+add+.
++++git+commit+-m+"$*"
++++git+push
}|4714688|4)现在重启VSC|4714689|5)进行更改，保存并键入lazygit+message以同时运行这三个命令|4714690|entityMap^0|0|0|0|0|9|K|0|0|0|0|C|F|0^^$0|@$1|2|3|4|5|6|7|10|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|11|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|12|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|13|8|@]|9|@]|A|$]]|$1|K|3|L|5|6|7|14|8|@$M|15|N|16|O|P]]|9|@]|A|$]]|$1|Q|3|R|5|6|7|17|8|@]|9|@]|A|$]]|$1|S|3|T|5|F|7|18|8|@]|9|@]|A|$G|H]]|$1|U|3|V|5|6|7|19|8|@]|9|@]|A|$]]|$1|W|3|X|5|6|7|1A|8|@$M|1B|N|1C|O|P]]|9|@]|A|$]]|$1|Y|3|-4|5|6|7|1D|8|@]|9|@]|A|$]]]|Z|$]]

For MAC VSC users the best setup is:

1) press 'shift+cmd+P' and type:

<pre><code>Shell Command: install 'code' command in PATH
</code></pre>

Press ENTER (this will install code command to get to the bash_profile easily)

2 ) you can now run: <code>code ~/.bash_profile</code> to open the empty bash_profile 

3) enter a new function in there:

<pre><code>function lazygit() {
 git add .
 git commit -m "$*"
 git push
}
</code></pre>

4) now restart VSC

5) make a change, save it and type <code>lazygit message</code> to run the three commands concurrently

blocks|key|208623|text|请看我的答案，我把所有东西都加到一行里了。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|208624|alias+gitcomm="echo+'Please+enter+commit+message';read+MSG+;git+add+--all;git+commit+-am=$MSG;git+push"|code-block|syntax|javascript|208625|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

Please see my answer,I added everything into a single line
<pre><code>alias gitcomm=&quot;echo 'Please enter commit message';read MSG ;git add --all;git commit -am=$MSG;git push&quot;
</code></pre>

blocks|key|208652|text|1)首先初始化:+git+init|type|unstyled|depth|inlineStyleRanges|entityRanges|data|208653|2)第二步在登台区添加文件:+git+add。|208654|3)执行git提交:+git+commit+-m+"message“|208655|4)最终推送:+git推送-all|208656|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|J|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|K|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|L|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|M|8|@]|9|@]|A|$]]|$1|H|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|I|$]]

1)first of all initialized : git init
2)secondly add file in staging area : git add .
3)to do git commit : git commit -m &quot;message&quot;
4)finally push : git push -all

blocks|key|4714836|text|我创建了一个专用的bash脚本来自动执行所有这些操作，因为它每次都会给我带来很多麻烦。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4714837|它看起来像这样|4714838|#!/bin/sh
#+Shell+Script+to+add+all+files,+commit+them+with+a+commit+message+from+user+and+then+push+them+to+remote+GitHub+repo
echo+"***+Automating+Git+Add,+Commit+and+Push+***"

#Ask+for+Username
echo+"Enter+your+GitHub+username:+"
read+username

#Ask+for+User+Github's+personal+access+token
echo+"Enter+your+GitHub+personal+access+token:+"
read+token

#+Ask+for+repository+name
echo+"Enter+repository+name"
read+repoName
#+Check+if+repository+exists+at+GitHub
curl+"https://api.github.com/repos/${username}/${repoName}.git"
#+If+repository+exits+then

if+[+$?+-eq+0+];+then
++++cd+$repoName
++++#+Display+unstaged+files
++++git+status
++++git+remote+set-url+origin+https://${token}@github.com/${username}/${repoName}.git
++++#+If+there+are+any+uncommited+and+unstatged+files,+ask+user+to+commit+them
++++if+[+"$(git+status+--porcelain)"+];+then
++++++++echo+"There+are+uncommited+and+unstatged+files.+Commit+them+before+pushing"
++++++++echo+"Enter+commit+message"
++++++++read+commitMessage
++++++++git+add+.
++++++++git+commit+-m+"$commitMessage"
++++++++git+push
++++++++echo+"Files+pushed+to+GitHub"
++++++++#+else+push+all+commited+and+staged+files+to+remote+repo
++++else
++++++++git+push
++++++++echo+"Files+pushed+to+GitHub"
++++++++
++++fi
++++#Echo+message+if+there+is+no+files+to+commit,+stage+or+push
++++if+[+"$(git+status+--porcelain)"+];+then
++++++++echo+"There+are+no+files+to+commit,+stage+or+push"
++++fi
else
++++echo+"Repository+does+not+exist"
fi


#+End+of+script|code-block|syntax|javascript|4714839|你可以通过创建一个script.sh+(或者任何你想在其中命名的)+BASH脚本来使用它，它使用GitHub的个人访问令牌进行身份验证，如果你还没有，你可以通过this官方文档找到如何继续使用它。|offset|length|4714840|我希望它能解决你的问题。|4714841|entityMap|0|LINK|mutability|MUTABLE|url|https://docs.github.com/en/authentication/keeping-your-account-and-data-secure/creating-a-personal-access-token^0|0|0|0|28|4|0|0|0^^$0|@$1|2|3|4|5|6|7|W|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|X|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|Y|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|Z|8|@]|9|@$K|10|L|11|1|12]]|A|$]]|$1|M|3|N|5|6|7|13|8|@]|9|@]|A|$]]|$1|O|3|-4|5|6|7|14|8|@]|9|@]|A|$]]]|P|$Q|$5|R|S|T|A|$U|V]]]]

I created a dedicated bash script for automating these all, as it gives me a lot of trouble every time.
It looks like this
<pre class="lang-sh prettyprint-override"><code>#!/bin/sh
# Shell Script to add all files, commit them with a commit message from user and then push them to remote GitHub repo
echo &quot;*** Automating Git Add, Commit and Push ***&quot;

#Ask for Username
echo &quot;Enter your GitHub username: &quot;
read username

#Ask for User Github's personal access token
echo &quot;Enter your GitHub personal access token: &quot;
read token

# Ask for repository name
echo &quot;Enter repository name&quot;
read repoName
# Check if repository exists at GitHub
curl &quot;https://api.github.com/repos/${username}/${repoName}.git&quot;
# If repository exits then

if [ $? -eq 0 ]; then
 cd $repoName
 # Display unstaged files
 git status
 git remote set-url origin https://${token}@github.com/${username}/${repoName}.git
 # If there are any uncommited and unstatged files, ask user to commit them
 if [ &quot;$(git status --porcelain)&quot; ]; then
 echo &quot;There are uncommited and unstatged files. Commit them before pushing&quot;
 echo &quot;Enter commit message&quot;
 read commitMessage
 git add .
 git commit -m &quot;$commitMessage&quot;
 git push
 echo &quot;Files pushed to GitHub&quot;
 # else push all commited and staged files to remote repo
 else
 git push
 echo &quot;Files pushed to GitHub&quot;
 
 fi
 #Echo message if there is no files to commit, stage or push
 if [ &quot;$(git status --porcelain)&quot; ]; then
 echo &quot;There are no files to commit, stage or push&quot;
 fi
else
 echo &quot;Repository does not exist&quot;
fi


# End of script

</code></pre>
You can simply use it by making a script.sh (or whatever you want to name in) BASH Script, it uses GitHub's Personal Acces Token to authenticate, if you don't have one already, you can find how to get on using <a href="https://docs.github.com/en/authentication/keeping-your-account-and-data-secure/creating-a-personal-access-token" rel="nofollow noreferrer">this</a> official Documentation.
I hope it solves your problem.

Is there any way to use these three commands in one?

<pre><code>git add .
git commit -a -m "commit" (do not need commit message either)
git push
</code></pre>

Sometimes I'm changing only one letter, CSS padding or something. Still, I have to write all three commands to push the changes. There are many projects where I'm only one pusher, so this command would be awesome!

git add, commit and push commands in one?

身份验证

GitHub

有没有办法同时使用这三个命令呢？git add .git commit -a -m "commit" (do not need commit message either)git push有时我只更改一个字母，CSS填充或其他什么。尽管如此，我仍然必须编写所有这三个命令来推动更改。在很多项目中，我只是一个推动者，所以这...

问git将添加、提交和推送命令合二为一？
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问git将添加、提交和推送命令合二为一？EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问git将添加、提交和推送命令合二为一？
EN