blocks|key|1136912|text|以下命令|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1136913|git+clone+git://github.com/username/projectname.git|code-block|syntax|javascript|1136914|满足了我的需求，但我假设您想要的不仅仅是只读访问，对吧？|1136915|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

The following command

<pre><code>git clone git://github.com/username/projectname.git
</code></pre>

worked for my needs, but I assume you want more than read-only access, right?

blocks|key|1136958|text|git+config+--system+http.sslcainfo+/bin/curl-ca-bundle.crt|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1136959|这是可行的。你不必给出完整的路径。|1136960|​|1136961|entityMap^0|0|1M|0|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@$9|M|A|N|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|O|8|@]|D|@]|E|$]]|$1|H|3|I|5|6|7|P|8|@]|D|@]|E|$]]|$1|J|3|-4|5|6|7|Q|8|@]|D|@]|E|$]]]|K|$]]

<code> git config --system http.sslcainfo /bin/curl-ca-bundle.crt </code>
 This works. You don't have to give full path.

blocks|key|1137008|text|如果您使用MSYS2...|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1137009|只需使用以下命令安装证书包即可：|1137010|32位|1137011|pacman+-S+mingw-w64-i686-ca-certificates+ca-certificates|code-block|syntax|javascript|1137012|64位|1137013|pacman+-S+mingw-w64-x86_64-ca-certificates+ca-certificates|1137014|entityMap^0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|R|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|S|8|@]|9|@]|A|$]]|$1|F|3|G|5|H|7|T|8|@]|9|@]|A|$I|J]]|$1|K|3|L|5|6|7|U|8|@]|9|@]|A|$]]|$1|M|3|N|5|H|7|V|8|@]|9|@]|A|$I|J]]|$1|O|3|-4|5|6|7|W|8|@]|9|@]|A|$]]]|P|$]]

<h1>If you use MSYS2...</h1>

Just install the certificate packages with the following commands:

<h3>32 bits</h3>

<pre><code>pacman -S mingw-w64-i686-ca-certificates ca-certificates
</code></pre>

<h3>64 bits</h3>

<pre><code>pacman -S mingw-w64-x86_64-ca-certificates ca-certificates
</code></pre>

blocks|key|1137044|text|在Linux上，我遇到了这个错误，并通过运行sudo+update-ca-certificates修复了它。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1137045|entityMap^0|M|R|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|K|8|@]|D|@]|E|$]]]|G|$]]

On Linux, I had this error and fixed it by running <code>sudo update-ca-certificates</code>.

blocks|key|922648|text|在使用msysgit的Windows上，我遇到了这个错误，原因是我添加了公司代理证书。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|922649|如果您编辑curl-ca-bundle.crt，您必须确定您的线条结尾。对于curl-ca-bundle，您必须使用Linux风格的线条结尾。|922650|>+git+ls-remote+--tags+--heads+https://github.com/oblador/angular-scroll.git
fatal:+unable+to+access+'https://github.com/oblador/angular-scroll.git/':+error+setting+certificate+verify+locations:
++CAfile:+C:\Program+Files+(x86)\Git\bin\curl-ca-bundle.crt
++CApath:+none|code-block|syntax|javascript|922651|您可以使用notepad%2B%2B将换行符转换为Linux+(换行符)。|922652|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|N|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|O|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|P|8|@]|9|@]|A|$]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

On Windows using msysgit I had this error and the cause was my additions of our corporate proxy certificates.

If you edit your curl-ca-bundle.crt you have to get sure about your lineendings. In case of the curl-ca-bundle you have to use Linux-Style lineendings.

<pre><code>&gt; git ls-remote --tags --heads https://github.com/oblador/angular-scroll.git
fatal: unable to access 'https://github.com/oblador/angular-scroll.git/': error setting certificate verify locations:
 CAfile: C:\Program Files (x86)\Git\bin\curl-ca-bundle.crt
 CApath: none
</code></pre>

You can use notepad++ to convert the lineendings to Linux (linefeed).

blocks|key|922729|text|这对我很有效(我使用的是Manjaro+linux)。我运行cmd来查看ca证书：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|922730|$+curl-config+--ca
**/etc/ssl/certs/ca-certificates.crt**|code-block|syntax|javascript|922731|但实际上我在path中找到了证书：|922732|**/etc/ca-certificates/extracted/ca-bundle.trust.crt**|922733|然后将配置添加到~/.gitconfig中(如果不存在，请创建它)：|922734|**vim+~/.gitconfig**
[http]
++++sslVerify+=+true
++++sslCAinfo+=+/etc/ca-certificates/extracted/ca-bundle.trust.crt

[user]
++++email+=+<email+of+github+account>
++++name+=+<username+of+github+account>|922735|它起作用了!|922736|.rbenv]$+git+pull

remote:+Counting+objects:+70,+done.
remote:+Compressing+objects:+100%25+(47/47),+done.
remote:+Total+70+(delta+39),+reused+12+(delta+12),+pack-reused+6
Unpacking+objects:+100%25+(70/70),+done.
From+https://github.com/sstephenson/rbenv
+++c43928a..efb187f++master+++++->+origin/master
+%2B+37ec781...7e57b52+user-gems++->+origin/user-gems++(forced+update)
Updating+c43928a..efb187f
Fast-forward
+libexec/rbenv-init+++++++++%7C++4+%2B%2B--
+libexec/rbenv-version-file+%7C++1+%2B
+test/init.bats+++++++++++++%7C++2+%2B-
+test/test_helper.bash++++++%7C+25+%2B%2B%2B%2B%2B%2B%2B%2B%2B%2B%2B%2B%2B%2B%2B----------
+4+files+changed,+19+insertions(%2B),+13+deletions(-)|922737|entityMap^0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|V|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|W|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|X|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|Y|8|@]|9|@]|A|$]]|$1|M|3|N|5|D|7|Z|8|@]|9|@]|A|$E|F]]|$1|O|3|P|5|6|7|10|8|@]|9|@]|A|$]]|$1|Q|3|R|5|D|7|11|8|@]|9|@]|A|$E|F]]|$1|S|3|-4|5|6|7|12|8|@]|9|@]|A|$]]]|T|$]]

This worked for me (I'm using Manjaro linux). I run the cmd to view ca-certificates:

<pre><code>$ curl-config --ca
**/etc/ssl/certs/ca-certificates.crt**
</code></pre>

But actually i found the certificates at the path:

<pre><code>**/etc/ca-certificates/extracted/ca-bundle.trust.crt**
</code></pre>

Then add the config into ~/.gitconfig (if not existing, create it):

<pre><code>**vim ~/.gitconfig**
[http]
 sslVerify = true
 sslCAinfo = /etc/ca-certificates/extracted/ca-bundle.trust.crt

[user]
 email = &lt;email of github account&gt;
 name = &lt;username of github account&gt;
</code></pre>

It works!

<pre><code>.rbenv]$ git pull

remote: Counting objects: 70, done.
remote: Compressing objects: 100% (47/47), done.
remote: Total 70 (delta 39), reused 12 (delta 12), pack-reused 6
Unpacking objects: 100% (70/70), done.
From https://github.com/sstephenson/rbenv
 c43928a..efb187f master -&gt; origin/master
 + 37ec781...7e57b52 user-gems -&gt; origin/user-gems (forced update)
Updating c43928a..efb187f
Fast-forward
 libexec/rbenv-init | 4 ++--
 libexec/rbenv-version-file | 1 +
 test/init.bats | 2 +-
 test/test_helper.bash | 25 +++++++++++++++----------
 4 files changed, 19 insertions(+), 13 deletions(-)
</code></pre>

blocks|key|1137325|text|另外，如果尝试使用git的用户与安装git的用户不同，则在Windows中可能会发生此问题。该错误可能表示git无法访问证书文件。以管理员身份安装git并使用@roger今天的答案解决了我的问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1137326|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

On a side note, this issue can happen in Windows if the user who is trying to use git is different than the user who installed it. The error may indicate that git cannot access the certificate files. Installing git as the administrator and using @rogertoday's answer resolved my issue.

blocks|key|1137390|text|解决方法:当我安装一个Git+windows安装程序的更新时，我得到了这个错误。发生的事情是，我没有以管理员权限安装它，所以Git被安装在"C:\Users\my_name\AppData\Local\Programs“而不是"C:\program+Files”中。以管理员身份重新安装Git，然后将其放在C:\program+Files中，一切都会恢复正常！|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1137391|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

SOLVED:
I got this error when I installed an update to the Git windows installer. What happened is that I did not install it with administrator rights, so Git was installed in "C:\Users\my_name\AppData\Local\Programs" instead of "C:\program Files". re-installing Git as administrator allowed to put it in C:\program Files and everything went fine again !

blocks|key|922915|text|我能够用下面的命令解决这个问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|922916|git配置--系统http.sslverify为假|922917|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

I was able to solve this issue with the following command.

git config --system http.sslverify false

blocks|key|922955|text|如果你使用的是随GitHub+for+Windows应用程序一起安装的Git命令外壳，那么在更新之后可能会出现这个问题和其他各种问题。只需启动Git+Hub窗口应用程序，然后再次关闭它。然后，shell将再次正常工作。问题是，在运行windows应用程序之前，更新不会完成。仅在其上使用shell并不会触发更新完成。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|922956|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

If you are using the Git command shell that installs with the GitHub for Windows app then this and various other problems can show after an update. Just start the Git Hub windows app and shut it down again. The shell will then work OK again. The problem is that the update does not complete until the windows application is run. Just using the shell on its does not trigger the update to complete.

blocks|key|922997|text|我在我的Windows版Github上看到过这个。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|922998|我建议卸载Github+for+Windows，然后重新安装。|922999|在此之前，我尝试了几种方法都没有成功，但这个解决方案对我有效！|923000|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|H|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|I|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|J|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|G|$]]

I've seen this on my Github for Windows.

I recommend uninstalling Github for Windows and installing it again.

Before this, I tried several ways with no success, but this solution worked for me!

blocks|key|1137568|text|我为adding/updating+the+CA+certificates+on+RHEL/CentOS+6找到了一个很好的解决方案，这是报告的问题的根本原因。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|1137569|由于它们已成为过时的发行版，因此该系统中的证书颁发机构直到执行命令sudo+yum+update后才会更新。|style|CODE|1137570|直到GIT_CURL_VERBOSE模式显示证书路径问题时，我才意识到这个问题。|1137571|entityMap|0|LINK|mutability|MUTABLE|url|https://techjourney.net/update-add-ca-certificates-bundle-in-redhat-centos/^0|2|1G|0|0|X|F|0|0^^$0|@$1|2|3|4|5|6|7|R|8|@]|9|@$A|S|B|T|1|U]]|C|$]]|$1|D|3|E|5|6|7|V|8|@$A|W|B|X|F|G]]|9|@]|C|$]]|$1|H|3|I|5|6|7|Y|8|@]|9|@]|C|$]]|$1|J|3|-4|5|6|7|Z|8|@]|9|@]|C|$]]]|K|$L|$5|M|N|O|C|$P|Q]]]]

I found a good solution for <a href="https://techjourney.net/update-add-ca-certificates-bundle-in-redhat-centos/" rel="nofollow">adding/updating the CA certificates on RHEL/CentOS 6</a> which is the root cause reported issue. 

Since they become outdated distros, the cacert authorities in that system has not been updated until executing the command <code>sudo yum update</code>. 

Didn't realize the issue until the GIT_CURL_VERBOSE mode shows the cacert path issue.

blocks|key|923102|text|对我来说，解决问题的是在我的Windows10机器上，我尝试卸载git并重新安装，默认使用windows+Cmd而不是Git+Bash|type|unstyled|depth|inlineStyleRanges|entityRanges|data|923103|打开CMD并运行以下命令|923104|//Once+installed+try+to+resintall+the+bin+folder+
git+config+--system+http.sslcainfo+\bin/curl-ca-bundle.crt

//disable+ssl+verification
git+config+--global+http.sslverify+"false"

//Then+try+to+clone+repo+again
git+clone+git@github.com:account/someproject.git|code-block|syntax|javascript|923105|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|L|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|M|8|@]|9|@]|A|$G|H]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

For me what solved the problem was when on my windows 10 box, I tried uninstalling git and resintalling, using Windows Cmd as default not Git Bash 

Open CMD and run the following 

<pre><code>//Once installed try to resintall the bin folder 
git config --system http.sslcainfo \bin/curl-ca-bundle.crt

//disable ssl verification
git config --global http.sslverify "false"

//Then try to clone repo again
git clone git@github.com:account/someproject.git
</code></pre>

blocks|key|1137656|text|git+config+--global+http.sslverify+"false"+|type|code-block|depth|inlineStyleRanges|entityRanges|data|syntax|javascript|1137657|将会解决这个问题。然后弹出一个窗口，输入您的用户名和密码|unstyled|1137658|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$B|C]]|$1|D|3|E|5|F|7|J|8|@]|9|@]|A|$]]|$1|G|3|-4|5|F|7|K|8|@]|9|@]|A|$]]]|H|$]]

<pre><code>git config --global http.sslverify "false" 
</code></pre>

Will solve the problem.
After that a Pop-up window appears to enter your username and password

blocks|key|1137699|text|在硬盘上移动git后，我收到了这个错误。在新位置删除和重新安装固定的东西|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1137700|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I received this error after moving git across hard drives. Deleting and reinstalling in the new location fixed things

blocks|key|1137741|text|我已经在Windows+Server+2016上解决了这个问题，方法是重新安装它，并在“选择HTTPS传输后端”安装步骤中选择“本地Windows安全通道库”。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1137742|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I've solved this problem on a Windows Server 2016 by reinstalling it and by choosing "native Windows Secure Channel library" on the "Choosing HTTPS transport backend" install step.

blocks|key|923311|text|在更新到Visual+Studio+2019+16.10.2+(从16.10.0)之后，我遇到了这个错误，而之前的Git工作正常。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|923312|我没有单独安装Git。(或者，换句话说，我只使用Git作为Visual+Studio的一部分。)|923313|我解决了这个问题，方法是在"C:\Program+Files+(x86)\Microsoft+Visual+Studio\2019\Professional\Common7\IDE\CommonExtensions\Microsoft\TeamFoundation\Team+Explorer\Git\mingw32\ssl\certs\ca-bundle.crt"中找到文件"ca-bundle.crt"，然后将其复制到它指示找不到的文件夹"C:\Program+Files\Git\mingw64\ssl\certs\ca-bundle.crt"中。|offset|length|style|CODE|923314|请注意，我必须创建"\mingw64\ssl\certs“目录，因为它们以前并不存在。|923315|在将文件复制到那里后，Git能够立即再次同步，而无需重新启动Visual+Studio。|923316|entityMap^0|0|0|D|4Q|58|F|65|1I|0|0|0^^$0|@$1|2|3|4|5|6|7|P|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|Q|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|R|8|@$F|S|G|T|H|I]|$F|U|G|V|H|I]|$F|W|G|X|H|I]]|9|@]|A|$]]|$1|J|3|K|5|6|7|Y|8|@]|9|@]|A|$]]|$1|L|3|M|5|6|7|Z|8|@]|9|@]|A|$]]|$1|N|3|-4|5|6|7|10|8|@]|9|@]|A|$]]]|O|$]]

I encountered this error after updating to Visual Studio 2019 16.10.2 (from 16.10.0), whereas previously Git was working correctly.
I do not have Git installed separately. (Or, put another way, I only use Git as part of Visual Studio.)
I solved this problem by locating the file <code>&quot;ca-bundle.crt&quot;</code> at <code>&quot;C:\Program Files (x86)\Microsoft Visual Studio\2019\Professional\Common7\IDE\CommonExtensions\Microsoft\TeamFoundation\Team Explorer\Git\mingw32\ssl\certs\ca-bundle.crt&quot;</code>, and then copying it to the folder it was indicating it couldn't be found at, <code>&quot;C:\Program Files\Git\mingw64\ssl\certs\ca-bundle.crt&quot;</code>.
Do note that I had to create the &quot;\mingw64\ssl\certs&quot; directories, as they did not previously exist.
After copying the file there, Git was able to sync once again immediately without restarting Visual Studio.

I'm trying to clone my GitHub project using the https-URL, but it fails with an error:

<pre><code>$ git clone https://foo@github.com/foo/foo-private.git
Cloning into foo-private...
Password:
error: error setting certificate verify locations:
 CAfile: /bin/curl-ca-bundle.crt
 CApath: none
 while accessing https://foo@github.com/foo/foo-private.git/info/refs

fatal: HTTP request failed
</code></pre>

What am I doing wrong?

Github: error cloning my private repository

Windows Server

Visual Studio

Windows

Manjaro

GitHub

Linux

我正在尝试使用https-URL克隆我的GitHub项目，但失败了，并显示了一个错误：$ git clone https://foo@github.com/foo/foo-private.gitCloning into foo-private...Password:error: error setting certif...

问Github:克隆私有存储库时出错
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Github:克隆私有存储库时出错EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Github:克隆私有存储库时出错
EN