blocks|key|719860|text|您安装了哪些JavaHL提供程序？听起来你需要64位JavaHL支持。你试过SlikSVN吗？|type|unstyled|depth|inlineStyleRanges|entityRanges|data|719861|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

What JavaHL provider have you installed? It sounds like you need 64 bit JavaHL support. Have you tried SlikSVN?

blocks|key|935658|text|对于ubuntu+12.04+amd64|type|unstyled|depth|inlineStyleRanges|entityRanges|data|935659|sudo+apt-get+install+libsvn-java|code-block|syntax|javascript|935660|在-vmargs之后将此代码添加到eclipse.ini：|935661|-vmargs
-Djava.library.path=/usr/lib/jni:/usr/lib/x86_64-linux-gnu/jni
...|935662|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|N|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|O|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

For ubuntu 12.04 amd64

<pre><code>sudo apt-get install libsvn-java
</code></pre>

add this to eclipse.ini after -vmargs:

<pre><code>-vmargs
-Djava.library.path=/usr/lib/jni:/usr/lib/x86_64-linux-gnu/jni
...
</code></pre>

blocks|key|935579|text|我用最简单的方法解决了这个问题：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|935580|sudo+apt-get+install+libsvn-java

sudo+cp+/usr/lib/jni/*+/usr/lib|code-block|syntax|javascript|935581|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

I solved this with easiest way: 

<pre><code>sudo apt-get install libsvn-java

sudo cp /usr/lib/jni/* /usr/lib
</code></pre>

blocks|key|935742|text|在eclipse+marketplace安装了Subclipse1.8后，遇到了同样的问题，并通过以下步骤得到了解决:+1.安装subversion+client+(必需)+2.安装Subversion+JavaHL本地库适配器(必需)|type|unstyled|depth|inlineStyleRanges|entityRanges|data|935743|现在它起作用了。|935744|P/S:+Eclipse+Indigo|935745|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|H|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|I|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|J|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|G|$]]

Faced the same problem after installed subclipse 1.8 from eclipse marketplace and resolved thru following steps:
1. Install subversion client (required)
2. Install Subversion JavaHL Native Library Adapter (required)

And it works now.

P/S: Eclipse Indigo

blocks|key|935700|text|我在Subcliess1.8中也遇到了类似的问题。由于许可证限制，SVN客户端不再与SVN捆绑。所以我发现消息"Unable+to+load+default+SVN+Client“。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|935701|我的解决方案是安装SVN客户端。再简单不过了。转到Eclispe+Marketplace，键入Subclipse，然后单击以再次安装Subclipse，选择所有选项。当重启Eclipse时，它将提示我们安装一个SVN客户端，选择SVNKit或JavaHL+(我选择JavaHL)。重新启动一次后，一切正常。|935702|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

I have a similar problem with Subclipse 1.8. Due to licenses limitations, SVN client aren't bundled with SVN any more. So I find the message "Unable to load default SVN Client". 

My solutions is to install SVN client. It can't be easier. Go to Eclispe Marketplace, type Subclipse and click to install Subclipse again, select all options. When restarting Eclipse, it will prompt us to install an SVN client, choose SVNKit or JavaHL (I choose JavaHL). After restarting one more time, it all works.

blocks|key|719926|text|在我遇到的x64上的fedora+16中，我通过从here下载Subversion1.7并安装：|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|719927|yum+install+subversion-javahl-1.7.1-1.fc16.x86_64.rpm++subversion-libs-1.7.1-1.fc16.x86_64.rpm+subversion-1.7.1-1.fc16.x86_64.rpm|code-block|syntax|javascript|719928|entityMap|0|LINK|mutability|MUTABLE|url|http://koji.fedoraproject.org/koji/buildinfo?buildID=276745^0|P|4|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@$A|R|B|S|1|T]]|C|$]]|$1|D|3|E|5|F|7|U|8|@]|9|@]|C|$G|H]]|$1|I|3|-4|5|6|7|V|8|@]|9|@]|C|$]]]|J|$K|$5|L|M|N|C|$O|P]]]]

In fedora 16 on x64 i meet also, i solved by downloading subversion 1.7 from <a href="http://koji.fedoraproject.org/koji/buildinfo?buildID=276745" rel="nofollow">here</a> and installing:

<pre><code>yum install subversion-javahl-1.7.1-1.fc16.x86_64.rpm subversion-libs-1.7.1-1.fc16.x86_64.rpm subversion-1.7.1-1.fc16.x86_64.rpm
</code></pre>

blocks|key|720069|text|使用更新站点http://subclipse.tigris.org/update_1.8.x在Eclipse+Juno上安装SVN|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|720070|转到帮助->安装新软件，然后添加更新站点。|720071|entityMap|0|LINK|mutability|MUTABLE|url|http://subclipse.tigris.org/update_1.8.x^0|6|14|0|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@$A|O|B|P|1|Q]]|C|$]]|$1|D|3|E|5|6|7|R|8|@]|9|@]|C|$]]|$1|F|3|-4|5|6|7|S|8|@]|9|@]|C|$]]]|G|$H|$5|I|J|K|C|$L|M]]]]

Install SVN on Eclipse Juno using the update site at <a href="http://subclipse.tigris.org/update_1.8.x" rel="nofollow">http://subclipse.tigris.org/update_1.8.x</a>

Go to Help -> Install new software, then Add update site.

blocks|key|720176|text|Zend+Studio+9如果你升级/更新到9.0.3，你也会得到这个错误。您需要卸载所有subEclipse和JavaHL程序，然后再次按照安装过程进行操作，并重新启动Zend+studio。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|720177|在Zend版本9.0.3中构建20120625|720178|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

Zend Studio 9 if you upgrade/update to 9.0.3 you will get this error as well. You need to uninstall all subEclipse and JavaHL stuff then follow the install procedures again and restart Zend studio.

Build 20120625 in Zend Version 9.0.3

blocks|key|936020|text|如果您使用的是Subversive插件(它比Subclipse更新，两者很容易混淆)，那么即使在eclipse.ini中配置了库路径，也可能会遇到查找库的问题。要解决整个问题，您可能还需要将此设置添加到文件中：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|936021|-Dsubversion.native.library=C:/SlikSVN_JavaHL/libsvnjavahl-1.dll|code-block|syntax|javascript|936022|阅读http://www.eclipse.org/subversive/installation-instructions.php以获得更多帮助，这是对所有内容的高质量解释。|offset|length|936023|entityMap|0|LINK|mutability|MUTABLE|url|http://www.eclipse.org/subversive/installation-instructions.php^0|0|0|2|1R|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|T|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|U|8|@]|9|@$I|V|J|W|1|X]]|A|$]]|$1|K|3|-4|5|6|7|Y|8|@]|9|@]|A|$]]]|L|$M|$5|N|O|P|A|$Q|R]]]]

If you are using the Subversive plugin (which is newer than the Subclipse one, and the two are easily confused with one another), you might run into problems finding the library even after configuring the library path in eclipse.ini. To fix the entire problem, you might need to add this setting to the file as well:

<pre><code>-Dsubversion.native.library=C:/SlikSVN_JavaHL/libsvnjavahl-1.dll
</code></pre>

Read <a href="http://www.eclipse.org/subversive/installation-instructions.php" rel="nofollow">http://www.eclipse.org/subversive/installation-instructions.php</a> for more help, it's a good-quality explanation of everything.

blocks|key|720386|text|我在Spring+STS+3.5.1和版本1.6上也遇到了同样的问题。升级到subeclipse的1.10版本，一切工作正常。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|720387|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I had same problem with Spring STS 3.5.1 and Sub eclipse version 1.6. Upgraded to version 1.10 of subeclipse and everything is working fine.

blocks|key|720462|text|以上问题是由自定义eclipse安装和更新版本的subclipse引起的。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|720463|您必须手动安装较旧版本的subclipse。|720464|为此，我做了以下工作：|720465|在“帮助”菜单下，单击“安装新软件...”从下拉菜单中选择"http://subclipse.tigris.org/update_1.6.x“，如果任何其他高级版本的网址可用，请将其更改为如上所示。|offset|length|720466|检查所选选项是否合理，例如“隐藏已安装的项目”单击“全选”单击下一步/完成完成。|720467|安装完成后，在windows菜单下转到preferences，然后单击Team和SVN。现在将客户端从Java+HL更改为SVN纯工具包。|720468|就这样。|720469|这个问题为我解决了|720470|entityMap|0|LINK|mutability|MUTABLE|url|http://subclipse.tigris.org/update_1.6.x^0|0|0|0|U|14|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|Z|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|10|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|11|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|12|8|@]|9|@$H|13|I|14|1|15]]|A|$]]|$1|J|3|K|5|6|7|16|8|@]|9|@]|A|$]]|$1|L|3|M|5|6|7|17|8|@]|9|@]|A|$]]|$1|N|3|O|5|6|7|18|8|@]|9|@]|A|$]]|$1|P|3|Q|5|6|7|19|8|@]|9|@]|A|$]]|$1|R|3|-4|5|6|7|1A|8|@]|9|@]|A|$]]]|S|$T|$5|U|V|W|A|$X|Y]]]]

The above problem arises with custom eclipse installation and due to updated version of subclipse.

You have to install the older version of subclipse manually.

For this i have done as following:

Under Help menu click "Install New Software..."
Select "<a href="http://subclipse.tigris.org/update_1.6.x" rel="nofollow">http://subclipse.tigris.org/update_1.6.x</a>" from the drop down menu
If URL of any other advanced version of are available change it to look as above.

Check the options selected are sensible e.g. "Hide items that are already installed"
Click "Select All"
Click Next/Finish through to completion.

After finishing the installation,under windows menu go to preferences,click on Team and on SVN.
Now change the client from Java HL to SVN pure kit.

That's it.

This resolved problem for me

I am constantly getting this error when working with eclispe and the subclipse plugin:

<pre><code>Unable to load default SVN Client
</code></pre>

I have already installed both the SVNKit and the JavaHL provider, but it can't be found in the preferences:

<a href="https://web.archive.org/web/20141224141632/http://www.deviantsart.com/upload/1otap6n.png" rel="nofollow noreferrer"><img src="https://web.archive.org/web/20141224141632if_/http://www.deviantsart.com/upload/1otap6n.png" alt="enter image description here"></a>

I am using eclipse for win64bit

subclipse: Unable to load default SVN Client

Eclipse

Java

在使用eclispe和subclipse插件时，我经常收到这个错误：Unable to load default SVN Client我已经安装了SVNKit和JavaHL提供程序，但在首选项中找不到它：​​我正在使用eclipse for win64bit

问子剪辑:无法加载默认的SVN客户端
EN

回答 11

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问子剪辑:无法加载默认的SVN客户端EN

回答 11

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问子剪辑:无法加载默认的SVN客户端
EN