blocks|key|157353|text|现在是2014年中期，据我所知还没有很好的解决方案，但我喜欢在你的应用程序的初始化代码中添加一个简短的setTimeout暂停的想法。如果不能添加setTimeout调用，您还可以从Safari控制台发出window.location.reload()命令来重新启动应用程序，从而获得完全调试的好处。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|157354|entityMap^0|1F|A|21|A|2U|O|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]|$9|M|A|N|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|O|8|@]|D|@]|E|$]]]|G|$]]

It's mid-2014 and there's still no elegant solution to this that I know of, but I like the idea of adding a short pause with <code>setTimeout</code> to your app's init code. If adding a <code>setTimeout</code> call isn't possible, you can also issue <code>window.location.reload()</code> from the Safari console to restart your application with the benefit of full debugging.

blocks|key|154777|text|这是一个部分解决方案。这将通过一次单击打开Safari的调试窗口，这要好得多，但不是自动的。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|154778|在mac上打开Script+Editor+(Command+%2B空格键并在脚本编辑器中键入)|offset|length|style|CODE|154779|粘贴以下代码：|154780|--+`menu_click`,+by+Jacob+Rus,+September+2006
--+
--+Accepts+a+list+of+form:+`{"Finder",+"View",+"Arrange+By",+"Date"}`
--+Execute+the+specified+menu+item.++In+this+case,+assuming+the+Finder+
--+is+the+active+application,+arranging+the+frontmost+folder+by+date.

on+menu_click(mList)
++++local+appName,+topMenu,+r

++++--+Validate+our+input
++++if+mList's+length+<+3+then+error+"Menu+list+is+not+long+enough"

++++--+Set+these+variables+for+clarity+and+brevity+later+on
++++set+{appName,+topMenu}+to+(items+1+through+2+of+mList)
++++set+r+to+(items+3+through+(mList's+length)+of+mList)

++++--+This+overly-long+line+calls+the+menu_recurse+function+with
++++--+two+arguments:+r,+and+a+reference+to+the+top-level+menu
++++tell+application+"System+Events"+to+my+menu_click_recurse(r,+((process+appName)'s+¬
++++++++(menu+bar+1)'s+(menu+bar+item+topMenu)'s+(menu+topMenu)))
end+menu_click

on+menu_click_recurse(mList,+parentObject)
++++local+f,+r

++++--+`f`+=+first+item,+`r`+=+rest+of+items
++++set+f+to+item+1+of+mList
++++if+mList's+length+>+1+then+set+r+to+(items+2+through+(mList's+length)+of+mList)

++++--+either+actually+click+the+menu+item,+or+recurse+again
++++tell+application+"System+Events"
++++++++if+mList's+length+is+1+then
++++++++++++click+parentObject's+menu+item+f
++++++++else
++++++++++++my+menu_click_recurse(r,+(parentObject's+(menu+item+f)'s+(menu+f)))
++++++++end+if
++++end+tell
end+menu_click_recurse

menu_click({"Safari",+"Develop",+"IOS+Simulator",+"index.html"})|code-block|syntax|javascript|154781|模拟器打开后，在脚本上单击run+(您可能需要在第一次设置中允许脚本编辑器)。|154782|(可选)您可以将脚本保存为应用程序，这样就不必打开脚本编辑器。|154783|(这个答案是Galatin之前答案的更详细的版本)|154784|entityMap^0|0|7|D|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|W|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|X|8|@$D|Y|E|Z|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|10|8|@]|9|@]|A|$]]|$1|J|3|K|5|L|7|11|8|@]|9|@]|A|$M|N]]|$1|O|3|P|5|6|7|12|8|@]|9|@]|A|$]]|$1|Q|3|R|5|6|7|13|8|@]|9|@]|A|$]]|$1|S|3|T|5|6|7|14|8|@]|9|@]|A|$]]|$1|U|3|-4|5|6|7|15|8|@]|9|@]|A|$]]]|V|$]]

This is a partial solution. This opens the debug window of Safari with one click which is a lot better but not automatic.

Open <code>Script Editor</code> on your mac (Command + Space Bar and type in Script Editor)

Paste in this code:

<pre><code>-- `menu_click`, by Jacob Rus, September 2006
-- 
-- Accepts a list of form: `{"Finder", "View", "Arrange By", "Date"}`
-- Execute the specified menu item. In this case, assuming the Finder 
-- is the active application, arranging the frontmost folder by date.

on menu_click(mList)
 local appName, topMenu, r

 -- Validate our input
 if mList's length &lt; 3 then error "Menu list is not long enough"

 -- Set these variables for clarity and brevity later on
 set {appName, topMenu} to (items 1 through 2 of mList)
 set r to (items 3 through (mList's length) of mList)

 -- This overly-long line calls the menu_recurse function with
 -- two arguments: r, and a reference to the top-level menu
 tell application "System Events" to my menu_click_recurse(r, ((process appName)'s ¬
 (menu bar 1)'s (menu bar item topMenu)'s (menu topMenu)))
end menu_click

on menu_click_recurse(mList, parentObject)
 local f, r

 -- `f` = first item, `r` = rest of items
 set f to item 1 of mList
 if mList's length &gt; 1 then set r to (items 2 through (mList's length) of mList)

 -- either actually click the menu item, or recurse again
 tell application "System Events"
 if mList's length is 1 then
 click parentObject's menu item f
 else
 my menu_click_recurse(r, (parentObject's (menu item f)'s (menu f)))
 end if
 end tell
end menu_click_recurse

menu_click({"Safari", "Develop", "IOS Simulator", "index.html"})
</code></pre>

Once the simulator has opened, click run on your script (you might need to allow the script editor in the settings the first time). 

(Optional) You can save your the scripts as an app so that you don't have to have the script editor open.

(this answer is a more detailed version of Galatin's previous answer)

blocks|key|302793|text|1)在OnDeviceReady处理程序中添加调试器；|type|unstyled|depth|inlineStyleRanges|entityRanges|data|302794|onDeviceReady:+function()+{
++++debugger;
++++//+the+rest+of+your+device+ready+code
}|code-block|syntax|javascript|302795|2)通过xcode或cmdline运行应用程序。|302796|3)通过Safari+->+Develop>Simulator->Appname->索引文件附加调试器|302797|4)打开safari的控制台视图，输入：|302798|Window.location+=+"";|302799|5)应用程序将重新加载，调试器将附加到onDeviceReady()的第一行。|302800|6)正常调试。|302801|entityMap^0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|V|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|W|8|@]|9|@]|A|$]]|$1|I|3|J|5|6|7|X|8|@]|9|@]|A|$]]|$1|K|3|L|5|6|7|Y|8|@]|9|@]|A|$]]|$1|M|3|N|5|D|7|Z|8|@]|9|@]|A|$E|F]]|$1|O|3|P|5|6|7|10|8|@]|9|@]|A|$]]|$1|Q|3|R|5|6|7|11|8|@]|9|@]|A|$]]|$1|S|3|-4|5|6|7|12|8|@]|9|@]|A|$]]]|T|$]]

1) Inside your OnDeviceReady handler add debugger;

<pre><code>onDeviceReady: function() {
 debugger;
 // the rest of your device ready code
}
</code></pre>

2) Run the application via xcode or cmdline.

3) Attach the debugger via Safari->Develop->Simulator->Appname -> index file

4) Open the console view of safari and enter:

<pre><code>Window.location = "";
</code></pre>

5) The app will reload and the debugger will attach on the first line of onDeviceReady().

6) Debug as normal.

I'm using iOS 6 simulator with the shiny new Web Inspector in Safari.

Question: Is it possible to automatically load the Web Inspector when the iOS 6 web application loads?

I'm using PhoneGap/Cordova and have a lot of javascript loading on startup. I use <code>console.log()</code> extensively for debugging and would like it to load Web Inspector once the application starts.

Currently when I hit Run on Xcode, the app loads and I <code>setTimeout</code> on my first function so I can rush over to Safari and attach the Web Inspector on that page.

I'd much prefer to remove this step and add an automated step that would load the Web Inspector directly.

Any other solutions?

When iOS simulator starts, is it possible to automatically load the Web Inspector?

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

我使用Safari6模拟器和iOS中闪亮的新Web Inspector。问:当iOS 6 Web应用程序加载时，是否可以自动加载web Inspector？我使用的是PhoneGap/Cordova，并在启动时加载了大量的javascript。我经常使用console.log()进行调试，并希望它在应用程序启动时加载W...

问当iOS模拟器启动时，是否可以自动加载Web Inspector？
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问当iOS模拟器启动时，是否可以自动加载Web Inspector？EN