blocks|key|4202875|text|您需要将TraceEnable+Off放在httpd.conf中|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|4202876|entityMap^0|4|F|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|K|8|@]|D|@]|E|$]]]|G|$]]

You need to put <code>TraceEnable Off</code> in httpd.conf

blocks|key|5620663|text|在Apache2中，您可以只在httpd.conf中添加TraceEnable+Off+(文件末尾)|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|5620664|TraceEnable+Off|code-block|syntax|javascript|5620665|要检查跟踪是否处于打开/关闭状态，可以使用Curl：|5620666|curl+-v+-X+TRACE+http://www.yourserver.com|5620667|entityMap^0|S|F|0|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@$9|R|A|S|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|T|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|U|8|@]|D|@]|E|$]]|$1|M|3|N|5|H|7|V|8|@]|D|@]|E|$I|J]]|$1|O|3|-4|5|6|7|W|8|@]|D|@]|E|$]]]|P|$]]

In Apache2 you can just add <code>TraceEnable Off</code> in httpd.conf (end of file)

<pre><code>TraceEnable Off
</code></pre>

To check if Trace is On/Off you can use Curl: 

<pre><code>curl -v -X TRACE http://www.yourserver.com
</code></pre>

blocks|key|4202955|text|要禁用这些方法，请在配置文件中为每个虚拟主机添加以下行：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4202956|RewriteEngine+on

RewriteCond+%25{REQUEST_METHOD}+%5E(TRACE%7CTRACK)

RewriteRule+.*+-+[F]|code-block|syntax|javascript|4202957|nessus说))|4202958|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

To disable these methods, add the following lines for each virtual
host in your configuration file :

<pre><code>RewriteEngine on

RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK)

RewriteRule .* - [F]
</code></pre>

nessus said)))

blocks|key|2092366|text|对于Apache+HTTPD+2.4：Require+not+method+TRACE+TRACK|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2092367|请参阅Require+Directive|2092368|entityMap|0|LINK|mutability|MUTABLE|url|http://httpd.apache.org/docs/2.4/mod/mod_authz_core.html#require^0|J|U|0|3|H|0|0^^$0|@$1|2|3|4|5|6|7|P|8|@$9|Q|A|R|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|S|8|@]|D|@$9|T|A|U|1|V]]|E|$]]|$1|H|3|-4|5|6|7|W|8|@]|D|@]|E|$]]]|I|$J|$5|K|L|M|E|$N|O]]]]

For Apache HTTPD 2.4:
<code>Require not method TRACE TRACK</code>

see <a href="http://httpd.apache.org/docs/2.4/mod/mod_authz_core.html#require" rel="nofollow noreferrer">Require Directive</a>

blocks|key|1663748|text|除非安装了支持TRACK的模块，否则Apache默认不支持TRACK，因此只需使用以下指令：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1663749|TraceEnable+Off|code-block|syntax|javascript|1663750|但是，对于腰带和吊带方法，还需要添加：|1663751|RewriteCond+%25{REQUEST_METHOD}+%5E(TRACE%7CTRACK)+[NC]
RewriteRule+%5E.*+-+[F]|1663752|这将禁用跟踪和跟踪。|1663753|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Q|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|R|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|S|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

Unless a module is installed which supports TRACK, then TRACK is not supported by default by Apache, hence the only need to have the directive:

<pre><code>TraceEnable Off
</code></pre>

However, for a belt-and-suspenders approach, also add:

<pre><code>RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK) [NC]
RewriteRule ^.* - [F]
</code></pre>

This will disable both TRACE and TRACK.

blocks|key|5620856|text|View+Demo+Trace+Using+SSH+Command|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|5620857|在apache安装中，默认情况下启用跟踪。有两种方法可以补救。如果您运行的是Apache+1.3.34、2.0.55或2.2版本中的任何版本，则可以使用第一种方法。只需将TraceEnable指令添加到httpd.conf中，并将值设置为Off。|5620858|5620859|+TraceEnable关闭|blockquote|5620860|5620861|5620862|在httpd.conf中添加此行|5620863|要做的第一件事是确保加载了mod_rewrite。如果您的apache配置中缺少mod_rewrite.so，但您已经安装了它(并且您的安装位置是/usr/local/apache)，则将以下语句添加到您的httpd.conf中：|5620864|LoadModule++rewrite_module++"/usr/local/apache/modules/mod_rewrite.so"|code-block|syntax|javascript|5620865|然后将以下内容也添加到httpd.conf文件中：|5620866|RewriteEngine+On
RewriteCond+%25{REQUEST_METHOD}+%5E(TRACE%7CTRACK)
RewriteRule+.*+-+[F]|5620867|使用Curl命令进行测试|5620868|5620869|+curl+-v+-X+TRACE+http://localhost|5620870|5620871|entityMap|0|LINK|mutability|MUTABLE|url|https://i.stack.imgur.com/mwQgs.png|1|http://localhost/^0|0|X|0|0|0|0|0|0|0|0|0|0|0|0|0|0|I|G|1|0|0^^$0|@$1|2|3|4|5|6|7|1E|8|@]|9|@$A|1F|B|1G|1|1H]]|C|$]]|$1|D|3|E|5|6|7|1I|8|@]|9|@]|C|$]]|$1|F|3|-4|5|6|7|1J|8|@]|9|@]|C|$]]|$1|G|3|H|5|I|7|1K|8|@]|9|@]|C|$]]|$1|J|3|-4|5|6|7|1L|8|@]|9|@]|C|$]]|$1|K|3|-4|5|6|7|1M|8|@]|9|@]|C|$]]|$1|L|3|M|5|6|7|1N|8|@]|9|@]|C|$]]|$1|N|3|O|5|6|7|1O|8|@]|9|@]|C|$]]|$1|P|3|Q|5|R|7|1P|8|@]|9|@]|C|$S|T]]|$1|U|3|V|5|6|7|1Q|8|@]|9|@]|C|$]]|$1|W|3|X|5|R|7|1R|8|@]|9|@]|C|$S|T]]|$1|Y|3|Z|5|6|7|1S|8|@]|9|@]|C|$]]|$1|10|3|-4|5|6|7|1T|8|@]|9|@]|C|$]]|$1|11|3|12|5|I|7|1U|8|@]|9|@$A|1V|B|1W|1|1X]]|C|$]]|$1|13|3|-4|5|6|7|1Y|8|@]|9|@]|C|$]]|$1|14|3|-4|5|6|7|1Z|8|@]|9|@]|C|$]]]|15|$16|$5|17|18|19|C|$1A|1B]]|1C|$5|17|18|19|C|$1A|1D]]]]

<a href="https://i.stack.imgur.com/mwQgs.png" rel="nofollow noreferrer" title="demo">View Demo Trace Using SSH Command</a>
TRACE is enabled by default in an apache installation. There are two ways to remediate. The first can be used if you are running Apache 1.3.34, 2.0.55, or anything in the 2.2 release. Simply add the TraceEnable directive into your httpd.conf and set the value to Off.
<blockquote>
<pre><code>TraceEnable Off
</code></pre>
</blockquote>
add this line in httpd.conf
The first thing to do is make sure that mod_rewrite is loaded. If mod_rewrite.so is missing from your apache configuration but you have it installed, (and your install location is /usr/local/apache), then add the following statement to your httpd.conf:
<pre><code>LoadModule rewrite_module &quot;/usr/local/apache/modules/mod_rewrite.so&quot;
</code></pre>
Then add the following as well to your httpd.conf file:
<pre><code>RewriteEngine On
RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK)
RewriteRule .* - [F]
</code></pre>
Test With Curl Command
<blockquote>
curl -v -X TRACE http://localhost
</blockquote>

I have Apache 2.2.22 in suse Linux. I want to disable track &amp; trace in Apache and use 1- TraceEnable Off and 2- RewriteEngine on

<pre><code>RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK)
RewriteRule .* - [F] .
</code></pre>

but of 2 way don't work.

Disable Track and Trace in apache

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

我在suse Linux中安装了Apache 2.2.22。我想在Apache中禁用跟踪和跟踪，并使用1- TraceEnable Off和2- RewriteEngine onRewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK)RewriteRule .* - [F] .但是两种方...

问在apache中禁用跟踪和跟踪
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问在apache中禁用跟踪和跟踪EN