blocks|key|2430664|text|你有没有试过在重新开瓶前清洗过溶液？|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2430665|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Have you tried to clean the solution befor rebiuld it?

blocks|key|2430696|text|这是如果我是你，我会做的检查和事情的列表(尝试在每一步之后构建)：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2430697|2430698|是否激活了错误列表？(有时我忘了激活，在清除所有已从调试文件夹中删除的内容后，我只能看到error+messages..|unordered-list-item|2430699|Clean+solution.|2430700|Double+check的warnings+&+messages)|2430701|Check+output窗口。|2430702|在发布模式下生成它。在隔离有问题的project.|2430703|Remove+COM和注释代码以查看这是否是problem.|2430704|Restart+VS2010.|2430705|Restart窗口的源代码之前，|2430706|将解决方案项目生成到项目。|2430707|2430708|entityMap^0|0|0|0|0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|Y|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|10|8|@]|9|@]|A|$]]|$1|F|3|G|5|E|7|11|8|@]|9|@]|A|$]]|$1|H|3|I|5|E|7|12|8|@]|9|@]|A|$]]|$1|J|3|K|5|E|7|13|8|@]|9|@]|A|$]]|$1|L|3|M|5|E|7|14|8|@]|9|@]|A|$]]|$1|N|3|O|5|E|7|15|8|@]|9|@]|A|$]]|$1|P|3|Q|5|E|7|16|8|@]|9|@]|A|$]]|$1|R|3|S|5|E|7|17|8|@]|9|@]|A|$]]|$1|T|3|U|5|E|7|18|8|@]|9|@]|A|$]]|$1|V|3|-4|5|6|7|19|8|@]|9|@]|A|$]]|$1|W|3|-4|5|6|7|1A|8|@]|9|@]|A|$]]]|X|$]]

This is the list of checks &amp; things I would do if I were you (try to build after each step):

<ul>
<li>Is error list activated? (Sometimes I forgot to activate and I can see only warnings &amp; messages)</li>
<li>Check output window for error messages..</li>
<li>Clean solution.</li>
<li>Double check after clean that everything is deleted from debug folders.</li>
<li>Build it in release mode.</li>
<li>Build solution project to project until you isolate problematic project.</li>
<li>Remove COM and comment code to see if is this the source of problem.</li>
<li>Restart VS2010.</li>
<li>Restart windows.</li>
</ul>

blocks|key|2430750|text|本质上不是答案-但你最好看看输出窗口，看看它在那里显示了什么。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2430751|此外，为了帮助解决这个问题，您可能需要查看您的MSBuild详细信息-如此屏幕截图(最后两个选项)所示：|2430752|​|2430753|📷|atomic|offset|length|2430754|2430755|当心--最高级别会产生大量信息。|2430756|最后-在命令提示符下从解决方案文件夹中运行msbuild将真正解决问题-因为错误消息和警告分别以红色和黄色出现。|style|CODE|2430757|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/eae49af34bb76c051e6729e012e10d53.png|imageAlt^0|0|0|0|0|1|0|0|0|0|L|7|0^^$0|@$1|2|3|4|5|6|7|10|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|11|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|12|8|@]|9|@]|A|$]]|$1|F|3|G|5|H|7|13|8|@]|9|@$I|14|J|15|1|16]]|A|$]]|$1|K|3|E|5|6|7|17|8|@]|9|@]|A|$]]|$1|L|3|M|5|6|7|18|8|@]|9|@]|A|$]]|$1|N|3|O|5|6|7|19|8|@$I|1A|J|1B|P|Q]]|9|@]|A|$]]|$1|R|3|-4|5|6|7|1C|8|@]|9|@]|A|$]]]|S|$T|$5|U|V|W|A|$X|Y|Z|-4]]]]

Not an answer per se - but you're better off looking at the output window and seeing what it says there.

Also, to help with that you might want to look at your MSBuild verbosity - as shown on this screenshot (last two options):

<img src="https://i.stack.imgur.com/s5mGK.png" alt="Build options - Visual Studio">

Beware - the highest level generates a MASSIVE amount of information.

Finally - running <code>msbuild</code> from the solution folder in a command prompt will really nail the issue - because error messages and warnings come up in red and yellow respectively.

blocks|key|4542850|text|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4542851|清理解决方案|ordered-list-item|4542852|尝试构建每个项目并查看问题所在。|4542853|检查(每个项目的)每个引用，以确保没有黄色警告标记|4542854|4542855|这个解决方案已经构建好了吗？|4542856|entityMap^0|0|0|0|0|0|0^^$0|@$1|2|3|-4|4|5|6|M|7|@]|8|@]|9|$]]|$1|A|3|B|4|C|6|N|7|@]|8|@]|9|$]]|$1|D|3|E|4|C|6|O|7|@]|8|@]|9|$]]|$1|F|3|G|4|C|6|P|7|@]|8|@]|9|$]]|$1|H|3|-4|4|5|6|Q|7|@]|8|@]|9|$]]|$1|I|3|J|4|5|6|R|7|@]|8|@]|9|$]]|$1|K|3|-4|4|5|6|S|7|@]|8|@]|9|$]]]|L|$]]

<ol>
<li>clean the solution</li>
<li>Try and build each project and see where the issue is.</li>
<li>Check each of the references (of each project) to make sure not have the yellow warning sign</li>
</ol>

Has the solution ever built?

blocks|key|1836503|text|几分钟前，我修复了.NET框架安装(在我的例子中是.NET框架v4.0扩展)。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1836504|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Few moments ago I fix it with repair of .NET Framework installation (.NET Framework v4.0 Extended in my case).

blocks|key|1832548|text|我刚刚遇到了这种情况，并意识到我在代码中留下了一个'#error‘行，然后忘记了它。当我尝试构建时，构建失败了，但是#error行没有出现在我的错误中。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1832549|尝试搜索所有“#error”|1832550|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

I just had this happen to me, and realized that I left a '#error' line in my code and forgot about it. When I tried to build, the build failed but the #error line didn't show up in my errors.

Try searching all for '#error'

blocks|key|5958895|text|我找到了自己的解决方案，很简单：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|5958896|当出现此错误时，保存项目并关闭VS+2013。之后，重新打开VS2013并打开最后一个项目。|offset|length|style|BOLD|5958897|它就像一种护身符。但每次都很烦人！|5958898|很多人在VS2010、VS2012和VS2013上报告了这个问题。|5958899|entityMap^0|0|0|1A|0|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|O|8|@$D|P|E|Q|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|R|8|@]|9|@]|A|$]]|$1|J|3|K|5|6|7|S|8|@]|9|@]|A|$]]|$1|L|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|M|$]]

I found my own solution and it is simple:

When this error occurs, save the project and close VS 2013. After that, re-open VS2013 and open the last project. 

It works like a charm. But it is very annoying every time!

Many people reported this problem in VS2010, VS2012 and VS2013.

blocks|key|4542916|text|可能是损坏的解决方案用户选项文件。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4542917|关闭该解决方案，删除其.suo+(VS2012%2B的.v12.suo)，重新打开该解决方案，Visual+Studio将构建一个新的解决方案。您将丢失StartUp项目、断点、书签、打开的文件、展开的项目/文件夹等。但与未构建的解决方案相比，这些都是次要的。|4542918|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

Could be a corrupt Solution User Options file.

Close the solution, delete its .suo (.v12.suo for VS2012+), reopen the solution, and Visual Studio will build a new one. You will lose the StartUp Project, breakpoints, bookmarks, which files are open, which projects/folders are expanded, etc. But that's all minor compared to the solution not building!

blocks|key|1836535|text|我在Visual+Studio+2013的新实现中修复了这个问题，方法是转到数据库项目/项目设置，并注意到目标平台是SQL+Server+2014，而不是应该的2012。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1836536|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I fixed it on my new implementation of Visual Studio 2013 by going to the database project / Project Settings and noticing that the Target Platform was SQL Server 2014 instead of 2012 like it should be.

blocks|key|1836548|text|我今天遇到了一个类似的问题，并修复了它。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1836549|1836550|Start+|ordered-list-item|1836551|Run…对已安装的Visual+Studio+version)|1836552|Right+click|1836553|Change|1836554|Repair|1836555|执行|1836556|Appwiz.cpl|unordered-list-item|offset|length|style|CODE|1836557|
|1836558|(Find|1836559|1836560|​|1836561|📷|atomic|1836562|1836563|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/bdda7116e5f1f3be9e0a79f3f8d5f25b.png|imageAlt^0|0|0|0|0|0|0|0|0|0|A|0|0|0|0|0|0|1|0|0|0^^$0|@$1|2|3|4|5|6|7|1G|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|1H|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|1I|8|@]|9|@]|A|$]]|$1|F|3|G|5|E|7|1J|8|@]|9|@]|A|$]]|$1|H|3|I|5|E|7|1K|8|@]|9|@]|A|$]]|$1|J|3|K|5|E|7|1L|8|@]|9|@]|A|$]]|$1|L|3|M|5|E|7|1M|8|@]|9|@]|A|$]]|$1|N|3|O|5|6|7|1N|8|@]|9|@]|A|$]]|$1|P|3|Q|5|R|7|1O|8|@$S|1P|T|1Q|U|V]]|9|@]|A|$]]|$1|W|3|X|5|6|7|1R|8|@]|9|@]|A|$]]|$1|Y|3|Z|5|R|7|1S|8|@]|9|@]|A|$]]|$1|10|3|-4|5|6|7|1T|8|@]|9|@]|A|$]]|$1|11|3|12|5|6|7|1U|8|@]|9|@]|A|$]]|$1|13|3|14|5|15|7|1V|8|@]|9|@$S|1W|T|1X|1|1Y]]|A|$]]|$1|16|3|12|5|6|7|1Z|8|@]|9|@]|A|$]]|$1|17|3|-4|5|6|7|20|8|@]|9|@]|A|$]]]|18|$19|$5|1A|1B|1C|A|$1D|1E|1F|-4]]]]

I got a similar issue today, and fixed it with repair. 

<ol>
<li>Start </li>
<li>Run&hellip;</li>
<li><code>Appwiz.cpl</code></li>
<li>(Find your installed Visual Studio version)</li>
<li>Right click</li>
<li>Change</li>
<li>Repair</li>
</ol>

<a href="https://i.stack.imgur.com/m6mlb.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/m6mlb.png" alt="Screenshot of empty error list with &quot;Rebuild All failed&quot;"></a>

blocks|key|5959017|text|当我们尝试重新命名服务引用名称时，可能会出现此错误，我们在服务引用中提供了其他名称，但在命名空间中的某些地方将引用旧名称，因此，如果您删除并添加服务引用，则保留相同的名称，否则我们可能会遇到此错误，但我们可以在输出窗口中看到错误。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|5959018|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Once chance of getting this error is when we try re naming the service reference name, we give some other name in the service reference, but in the namespace some where it will be referring the old name, so if you delete and add a service reference then keep the same name, else we may face this error, but we can see the error in the Output window.

blocks|key|2430991|text|显然，造成这种情况的原因很多。我只是找到了问题的原因:我创建的一个新项目的.NET版本高于顶级项目的版本。(4.5.2+vs+4.0)|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2430992|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

There are apparently many causes of this. I just found the cause of my issue: the .NET version of a new project I created was higher than the version of the top-level project. (4.5.2 vs 4.0)

blocks|key|5959106|text|我在VS+2015中也遇到了同样的问题。我尝试了以下几种方法，但没有成功：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|5959107|5959108|关闭VS项目，然后重新打开|ordered-list-item|5959109|关闭所有打开的VS项目，然后仅重新打开出现问题的项目:清除并清除|5959110|\|5959111|bin\|5959112|5959113|中的所有文件|5959114|最后，我尝试了Keith+Robertson's+answer,+.suo+(\Visual+Studio+2015\Projects\[ProjectName]\.vs\[ProjectName]\v14\.suo)。尽管这并没有给我一个好的构建，但它最终给了我一条错误消息，指出我的应用程序有两个入口点。我转到应用程序属性(Alt+%2B+Enter)并从下拉菜单中选择一个Startup对象。|offset|length|style|CODE|5959115|entityMap|0|LINK|mutability|MUTABLE|url|https://stackoverflow.com/a/27572028/241211^0|0|0|0|0|0|0|0|0|X|4|13|1X|7|P|0|0^^$0|@$1|2|3|4|5|6|7|12|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|13|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|14|8|@]|9|@]|A|$]]|$1|F|3|G|5|E|7|15|8|@]|9|@]|A|$]]|$1|H|3|I|5|E|7|16|8|@]|9|@]|A|$]]|$1|J|3|K|5|E|7|17|8|@]|9|@]|A|$]]|$1|L|3|-4|5|E|7|18|8|@]|9|@]|A|$]]|$1|M|3|N|5|6|7|19|8|@]|9|@]|A|$]]|$1|O|3|P|5|6|7|1A|8|@$Q|1B|R|1C|S|T]|$Q|1D|R|1E|S|T]]|9|@$Q|1F|R|1G|1|1H]]|A|$]]|$1|U|3|-4|5|6|7|1I|8|@]|9|@]|A|$]]]|V|$W|$5|X|Y|Z|A|$10|11]]]]

I had the same issue in VS 2015. I tried the following with no success:

<ol>
<li>Close VS project and reopen</li>
<li>Close all open VS projects and reopen just the project that had the issue</li>
<li>Clean solution</li>
<li>Rebuild solution</li>
<li>Delete all files in bin\debug and bin\release</li>
</ol>

Lastly I tried <a href="https://stackoverflow.com/a/27572028/241211">Keith Robertson's answer,</a> delete <code>.suo</code> (<code>\Visual Studio 2015\Projects\[ProjectName]\.vs\[ProjectName]\v14\.suo</code>). Although this didn't get me a good build, it did finally give me an error message stating that I had two entry points to my application. I went to application properties (Alt + Enter) and select a Startup object from the drop down.

blocks|key|5959151|text|我也有同样的问题。我试图引用一个较高的.net框架版本(4.5.2)到较低的.net框架版本(4.5)，这会导致构建错误。我在两个项目中使用了相同的版本，并且它起作用了。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|5959152|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I had the same problem. I was trying to refrence a higher .net framework version(4.5.2) to lower .net framework version(4.5) which was causing build error. I made the version same in both projects and it worked.

blocks|key|5959162|text|在我的情况下，这是错误的日期和时间的计算机。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|5959163|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

In my case it was the wrong date and time of computer.

blocks|key|4543217|text|检查查看输出窗口(查看->输出)，因为它会告诉您出了什么问题。有时可能缺少引用，或者解决方案中某个项目的.NET目标版本有问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4543218|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Check the Output Window (View -> Output) as that will tell you what's going wrong. Sometimes a reference might be missing or there is an issue with the targeted version of .NET for one project in a solution.

blocks|key|1836676|text|这个错误对我来说似乎有点普遍。我也经历过这种情况，但我设法以不同于这里提到的任何一个的方式解决了它。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1836677|我有一个项目和几个依赖项。其中一个依赖关系已经发生了变化。|1836678|📷|atomic|offset|length|1836679|​|1836680|在调试模式下编译主项目时，我验证了一切正常。但是，切换到发布模式并重新编译了该问题。Rebuild+all+failed和0+Errors|style|CODE|1836681|1836682|1836683|1836684|通过分析调试输出，我遇到了一个错误：|1836685|1836686|1836687|1836688|1836689|尽管构建依赖项配置正确。在发布模式下编译时，主项目找不到在辅助项目中创建的新方法。因此，我不得不在发布模式下逐个重新编译每个次要项目。在那之后，我重新编译了主项目，一切都正常了。|1836690|希望它能帮助一些人！|1836691|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/29193fcfaf923768b049893cc8f706d0.png|imageAlt|1|https://ask.qcloudimg.com/http-save/yehe-900000/58eb3bdbe69abed6454474004e92b316.png|2|https://ask.qcloudimg.com/http-save/yehe-900000/5b7422e77c310f1bb242831a0f933d02.png|3|https://ask.qcloudimg.com/http-save/yehe-900000/ff2ed9d68d6e06ecd2d5af4ae57300f5.png^0|0|0|0|1|0|0|0|16|I|1P|8|0|0|0|1|1|0|0|0|0|0|1|2|0|0|1|3|0|0|0|0^^$0|@$1|2|3|4|5|6|7|1G|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|1H|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|1I|8|@]|9|@$G|1J|H|1K|1|1L]]|A|$]]|$1|I|3|J|5|6|7|1M|8|@]|9|@]|A|$]]|$1|K|3|L|5|6|7|1N|8|@$G|1O|H|1P|M|N]|$G|1Q|H|1R|M|N]]|9|@]|A|$]]|$1|O|3|J|5|6|7|1S|8|@]|9|@]|A|$]]|$1|P|3|E|5|F|7|1T|8|@]|9|@$G|1U|H|1V|1|1W]]|A|$]]|$1|Q|3|J|5|6|7|1X|8|@]|9|@]|A|$]]|$1|R|3|S|5|6|7|1Y|8|@]|9|@]|A|$]]|$1|T|3|J|5|6|7|1Z|8|@]|9|@]|A|$]]|$1|U|3|E|5|F|7|20|8|@]|9|@$G|21|H|22|1|23]]|A|$]]|$1|V|3|E|5|F|7|24|8|@]|9|@$G|25|H|26|1|27]]|A|$]]|$1|W|3|J|5|6|7|28|8|@]|9|@]|A|$]]|$1|X|3|Y|5|6|7|29|8|@]|9|@]|A|$]]|$1|Z|3|10|5|6|7|2A|8|@]|9|@]|A|$]]|$1|11|3|-4|5|6|7|2B|8|@]|9|@]|A|$]]]|12|$13|$5|14|15|16|A|$17|18|19|-4]]|1A|$5|14|15|16|A|$17|1B|19|-4]]|1C|$5|14|15|16|A|$17|1D|19|-4]]|1E|$5|14|15|16|A|$17|1F|19|-4]]]]

This error seems a bit generic to me. I also went through this situation, but I managed to solve it differently than any of the ones mentioned here. 
I have a project and several dependencies. And one of these dependencies has undergone a change. 
<a href="https://i.stack.imgur.com/CS7hk.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/CS7hk.png" alt="enter image description here"></a>

When compiling the main project in debug mode, I verified that everything was ok.
However, switching to release mode and recompiling the problem occurred.<code>Rebuild all failed</code> and <code>0 Errors</code> 

<a href="https://i.stack.imgur.com/sFRSi.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/sFRSi.png" alt="enter image description here"></a>

By analyzing the debug output, I encountered an error:

<a href="https://i.stack.imgur.com/qR92y.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/qR92y.png" alt="enter image description here"></a>
<a href="https://i.stack.imgur.com/Er1ug.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/Er1ug.png" alt="enter image description here"></a>

Although the build dependencies are configured correctly. When compiling in release mode, the main project did not find the new method created in the secondary project.
So I had to recompile each secondary project one by one in release mode. After that, I recompiled the main project and everything worked.

Hope it helps someone!

blocks|key|1832792|text|我没有收到任何反馈/消息/错误。只是所有的项目都无法构建。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1832793|我关闭并再次尝试--我注意到一个错误，提示“您无权访问...”|1832794|我单击了我的帐户，重新输入了我的凭据，并重新构建了解决方案。|1832795|瞧！当我构建一个解决方案时，我得到了我所习惯看到的东西--大量的错误。|1832796|希望这对某些人有帮助。|1832797|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|M|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|N|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|O|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|P|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|K|$]]

I was getting no feedback/messages/errors. Just that all projects failed to build.

I closed and tried again--I noticed an error saying "you are not authorized to access..."

I clicked on my account, re-entered my credentials, and rebuilt the solution.

Voila! I got what I am used to seeing when I build a solution -- plenty of errors in all their glory.

Hope this helps someone.

blocks|key|5959348|text|选择适当的目标框架|type|unstyled|depth|inlineStyleRanges|entityRanges|data|5959349|应用程序右键单击project|5959350|Properties|unordered-list-item|5959351|In+|5959352|选项卡，选择目标框架|5959353|5959354|entityMap^0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|O|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|P|8|@]|9|@]|A|$]]|$1|G|3|H|5|F|7|Q|8|@]|9|@]|A|$]]|$1|I|3|J|5|F|7|R|8|@]|9|@]|A|$]]|$1|K|3|-4|5|6|7|S|8|@]|9|@]|A|$]]|$1|L|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|M|$]]

Select the appropriate target framework 
- Right click on project 
- Properties 
- In application tab, Select the target framework

blocks|key|5959366|text|我也有同样的感觉。对我来说，重启VS并以管理员身份运行它是有帮助的。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|5959367|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I just had the same thing. For me, it helped to restart VS and run it as Administrator.

blocks|key|1836731|text|这是另一个对一些人来说可能听起来很熟悉的原因。我已经将一些代码集成到我的解决方案中，包装了一个DLL。随附的C#代码文件提供了一个很好的托管应用程序接口，并处理了访问该动态链接库的低级LoadLibrary内容。两者都有相同的基本名称，所以我有SomeName.cs和SomeName.dll。我只需将它放入任何项目中，它就会工作。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1836732|当我开始在不同的项目中使用它时，这并不是很好。我在多个项目中得到了DLL和包装器代码的副本。因此，我认为最好将包装器代码和DLL放到一个新的类库项目中，然后从其他项目中引用该新项目。|1836733|在我做完这些之后，我开始得到这个问题。构建进行得很顺利，直到最后一个阶段，然后就失败了，没有出现错误。输出只显示了成功。|1836734|问题出在包装类库项目的名称上。我对此使用了相同的基本名称(SomeName)。默认情况下，程序集名称是SomeName.dll，而我已经有一个这样的文件(要包装的DLL+)，因此我与输出文件有冲突。|1836735|将包装项目及其输出程序集重命名为SomeNameWrapper后，问题就消失了。|1836736|这可能不是您的确切原因，但似乎您也有一些名称冲突或部署问题。编译器不会给你一个错误也就不足为奇了，因为在编译阶段没有问题，问题从部署开始，显然这不是以一种明显的方式出现的。|1836737|entityMap^0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|O|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|P|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|Q|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|R|8|@]|9|@]|A|$]]|$1|J|3|K|5|6|7|S|8|@]|9|@]|A|$]]|$1|L|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|M|$]]

Here's yet another reason which may sound familiar to some. I had integrated some code into my solution that wrapped a DLL. The C# code file that came with it offered a nice managed API and handled the low-level LoadLibrary stuff to access the DLL. Both had the same base name, so I had SomeName.cs and SomeName.dll. I could just drop it into any project and it would work.

This wasn't so nice after a while as I started using it in different projects. I got copies of both the DLL and the wrapper code in multiple projects. So I figured it would be better to drop the wrapper code and the DLL into a new class library project and then reference that new project from other projects.

After I had done that, I started to get this issue. The build went well up until the very last stage and then failed without error. Output showed nothing but successes.

The problem was the name of the wrapping class library project. I used the same base name (SomeName) for this. By default the assembly name would be SomeName.dll and I already had one such file (the DLL to be wrapped), thus I had a conflict with output files.

After renaming the wrapping project and its output assembly to SomeNameWrapper, the problem went away.

This may not be your exact cause but it seems likely you have some name clash or deployment issue as well. And it is not surprising the compiler won't give you an error because there is no problem in the compilation phase, the trouble starts with deployment and apparently this does not come out in an obvious way.

blocks|key|5959421|text|我有相同的问题，原来的海报是显示0错误和重建所有成功。Output选项卡显示一条消息，指出引用的dll是使用更高版本的.NET框架生成的。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|5959422|更改.NET框架以匹配解决了我遇到的0个错误的问题，并且所有重建都成功了。|5959423|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

I had the same problem the original poster was displaying with 0 errors and Rebuild all succeeded. The Output tab showed a message that a referenced dll was built with a higher version of the .NET Framework. 

Changing the .NET framework to match resolved the issue I was having with 0 Errors and Rebuild All succeeded.

blocks|key|2431401|text|解决方案:因为没有为调试设置先决条件仅为版本01设置-更改解决方案配置(在主屏幕中)设置(调试为发布)将解决方案平台设置为(任何CPU)+02-为调试设置先决条件(如果要继续调试模式)03-为所有项目设置目标平台版本|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2431402|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

The solution:
Because Prerequisites not set for debug set only for release
01-Change solution configuration ( in main screen )
set (debug to release)
set solution platform to (Any CPU)
02-Set Prerequisites for debug ( If you want to continue in debug mode )
03-set target platform version for all Projects

blocks|key|4543505|text|解决方案中包含的某些文件不在正确的目录中，或者您更改了应用程序中一个或多个目录的名称。在“解决方案资源管理器”的“设置”下，检查所有文件的列表，并删除SourcePath属性中未正确列出的文件。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4543506|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Some of the files included in your solution are not in the correct directories, or you have changed the name of one or more directories in your application. In the solution explorer under Setup review the list of all files and remove those that are not properly listed in the SourcePath Property.

Why does Rebuild fail with no errors?
Since this morning, this error keeps showing up. I build the entire solution (25 C# managed projects) and a &quot;Rebuild All failed&quot; appears, but without any errors! (I have 13 warnings about COM not supporting Generics, but it's &quot;normal&quot; because one dll is exposed as COM.)
<img src="https://i.stack.imgur.com/Ty2n6.png" alt="Screenshot of 0 Errors with &quot;Rebuild All failed&quot;" />

Visual Studio "Rebuild all failed"

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

为什么重建失败而没有错误？从今天早上开始，这个错误就一直出现。我构建了整个解决方案(25个C#托管项目)，出现了一个“全部重建失败”，但没有任何错误！(我有13个关于COM不支持泛型的警告，但这是“正常的”，因为一个dll被公开为COM。)​​

问Visual Studio“全部重建失败”
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Visual Studio“全部重建失败”EN