blocks|key|1853149|text|我也有同样的问题。当我向其中一个存储库添加新用户组时，发生了此问题。我不小心将我的最高UserGroup设置为只读，而没有意识到我在其中。由于SVN+access的工作方式，我最终无法突然提交任何文件或创建任何新文件夹。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1853150|首先，确保你的网址与存储库完全匹配，这似乎是最常见的问题，然后按照伯纳德的建议使用read+this检查你的访问权限。|offset|length|1853151|entityMap|0|LINK|mutability|MUTABLE|url|http://www.visualsvn.com/support/topic/00033/^0|0|15|9|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|O|8|@]|9|@$D|P|E|Q|1|R]]|A|$]]|$1|F|3|-4|5|6|7|S|8|@]|9|@]|A|$]]]|G|$H|$5|I|J|K|A|$L|M]]]]

I had the same problem. It occurred when I was adding a new User Group to one of the Repositories. I accidently set my highest UserGroup to Read-Only, without realising I was in it. I ended up being unable to suddenly commit any file or creating any new folder, because of the way SVN access works. 

First make sure your URL exactly matches the Repository, that seems to be the most common problem, then <a href="http://www.visualsvn.com/support/topic/00033/" rel="nofollow noreferrer">read this</a> and check your access as Bernard suggested.

blocks|key|5993695|text|请确保您输入了正确的用户名，因为它是case-sensitive。当用户名与wordpress.org上的大小写不匹配时，通常会发生这种情况。我已经花了几个小时来解决这个问题。|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|5993696|entityMap^0|I|E|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|K|8|@]|D|@]|E|$]]]|G|$]]

Please Make sure that you have entered the correct username as it is case-sensitive it usually happens when username doesn't match the case on wordpress.org . I've already lost hours to fix this issue.

blocks|key|4576861|text|我们在使用CollabNet+Subversion+Edge时遇到了这个问题。修复方法是确保存储库访问规则中定义的组通过使用@前缀引用其他组。最好用一个例子来解释：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4576862|存储库访问规则：|4576863|[MyRepository:/branches/dev]
*+=+r
@admin+=+rw
@dev+=+rw|code-block|syntax|javascript|4576864|[groups]之前：|offset|length|style|CODE|4576865|admin=user1,user2
dev=user3,user4|4576866|[groups]之后：|4576867|admin=user1,user2
dev=@admin,user3,user4|4576868|entityMap^0|0|0|0|0|8|0|0|0|8|0|0^^$0|@$1|2|3|4|5|6|7|W|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|X|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|Y|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|Z|8|@$K|10|L|11|M|N]]|9|@]|A|$]]|$1|O|3|P|5|F|7|12|8|@]|9|@]|A|$G|H]]|$1|Q|3|R|5|6|7|13|8|@$K|14|L|15|M|N]]|9|@]|A|$]]|$1|S|3|T|5|F|7|16|8|@]|9|@]|A|$G|H]]|$1|U|3|-4|5|6|7|17|8|@]|9|@]|A|$]]]|V|$]]

We had this problem when using CollabNet Subversion Edge. The fix was to make sure that the groups defined in our Repository Access Rules had references to other groups by using the @ prefix. Better explained with an example:

Repository access rule:

<pre><code>[MyRepository:/branches/dev]
* = r
@admin = rw
@dev = rw
</code></pre>

<code>[groups]</code> before:

<pre><code>admin=user1,user2
dev=user3,user4
</code></pre>

<code>[groups]</code> after:

<pre><code>admin=user1,user2
dev=@admin,user3,user4
</code></pre>

blocks|key|2465785|text|我也有同样的问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2465786|我使用的是乌龟SVN。在我的例子中，我有两个组，例如'a-grp‘和'b-grp’。提交访问被拒绝的用户id+(例如1234)在两个组中都可用。|2465787|'rw‘权限被授予根文件夹级别的组'a-grp’。|2465788|'r‘权限授予根文件夹中子文件夹级别的组'b-grp’。这就是问题所在。|2465789|我的故障存储库访问规则：|2465790|reqdocs=1234,+5696,+7458
testdocs=1234,+5525,+9969,+4444
 
[MyRepository:/branches/rootfolder]
@reqdocs=+rw
 
[MyRepository:/branches/rootfolder/subfolder]
@testdocs=+r|code-block|syntax|javascript|2465791|因此，我从'testdocs‘组中删除了用户id+(1234)。现在它起作用了。|2465792|希望能有所帮助。谢谢。|2465793|entityMap^0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|V|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|W|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|X|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|Y|8|@]|9|@]|A|$]]|$1|J|3|K|5|L|7|Z|8|@]|9|@]|A|$M|N]]|$1|O|3|P|5|6|7|10|8|@]|9|@]|A|$]]|$1|Q|3|R|5|6|7|11|8|@]|9|@]|A|$]]|$1|S|3|-4|5|6|7|12|8|@]|9|@]|A|$]]]|T|$]]

I had the same problem. I am using Tortoise SVN. In my case, I have two groups say for example 'a-grp' and 'b-grp'. The user id (say for example 1234) for which the commit access is denied is available in both the groups. The 'rw' permission is given to the group 'a-grp' for the root folder level. The 'r' permission is given to the group 'b-grp' for the subfolder level in the root folder.
That is the issue.
 
 
My fault Repository access rule:

<pre><code>reqdocs=1234, 5696, 7458
testdocs=1234, 5525, 9969, 4444
&lt;br&gt;
[MyRepository:/branches/rootfolder]
@reqdocs= rw
&lt;br&gt;
[MyRepository:/branches/rootfolder/subfolder]
@testdocs= r
</code></pre>

 
Hence I removed the user id (1234) from the 'testdocs' group. Now its working. 
Hope it helps. Thank you.

Recently a bunch of renaming changes were made into a folder that I checked out a while ago. Once I updated all of the renaming changes, I am having a problem of not being able to commit anything. It says the following:

<img src="https://i.stack.imgur.com/q3jSO.jpg" alt="enter image description here">

I am able to read, write, and update new files. I just cannot commit.

I think I tried almost everything - doing a cleanup, deleting and rechecking out the folder...

I have googled this problem and someone mentioned a case-sensitive issue when checking out the repository, but I am sure I have the svn repository url correct. Note that everything was working (commits and all) before the whole renaming changes.

Does anyone have any clues ?

Thanks!

TortoiseSVN cannot commit, says "forbidden by server"

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋 

腾讯云代码助手

CODING DevOps

Cloud Studio

SDK中心

API中心

命令行工具

最近，我之前签出的一个文件夹中进行了一些重命名更改。一旦我更新了所有的重命名更改，我就遇到了无法提交任何内容的问题。它说了以下内容：​​我能够读、写和更新新文件。我只是不能承诺。我想我几乎什么都试过了--清理、删除和重新签出文件夹……我用谷歌搜索了这个问题，有人在签出存储库时提到了一个区分大小写的问题，但我确信我的sv...

问TortoiseSVN无法提交，显示“已被服务器禁止”
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问TortoiseSVN无法提交，显示“已被服务器禁止”EN