blocks|key|4512209|text|尝试从模拟器中删除该应用程序(按住该应用程序的图标进入抖动模式，然后单击该应用程序旁边的X)并从设备中删除该应用程序。然后让Xcode重新安装它。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4512210|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Try deleting the app from the simulator (hold down on the app's icon to get to jiggle mode, then click the X by the app) and from your device. Then let Xcode reinstall it.

blocks|key|1068102|text|我最终从头开始重新创建了xibs，并成功了。非常令人沮丧。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1068103|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I ended up recreating the xibs from scratch and that worked. Very frustrating.

blocks|key|1816336|text|不知道这有没有帮助，但我刚拿到这个。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1816337|我花了好几天才弄明白。在我的示例中，我增强了现有的Xib文件。我在界面生成器中应用的更改从未出现在应用程序中。|1816338|最终我找到了原因。我将FilesOwner视图出口设置为顶视图下方的子视图。当我增强视图时，我将其作为顶部视图的扩展。因此，在运行应用程序时，这些更改从未出现过。|1816339|将视图出口更改为正确的视图(在我的例子中是顶视图)成功了，而且一切都很好……|1816340|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|J|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|K|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|L|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|M|8|@]|9|@]|A|$]]|$1|H|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|I|$]]

Not sure whether this helps, but I just had this. 

It took me days to work it out. In my case I enhanced an existing Xib file. The changes I applied in interface builder never appeared in the app.

Eventually I found the cause. I had my FilesOwner view outlet set to a subview below the top view. When I enhanced the view I did this as an extension to th top view. Thus the changes never appeared when running the app. 

Changing the view outlet to the correct view ( the top view in my case ) did the trick and it all worked fine ...

blocks|key|1070115|text|只需修改您的XIB文件，然后保存它们，xCode将检测到修改(文件系统中的最后修改日期)，然后从其实际路径加载xib，而不是从缓存路径:P|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1070116|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Just modify your XIB files a bit, then save them, xCode will detect a modification (last modified date in the file system) then load the xib from its actual path, and not from a cache-path :P

blocks|key|3101515|text|您可以尝试对XIB进行一些修改，这样xCode就可以在文件系统中的最后修改日期之前检测到修改。然后，它将从实际路径加载xib，而不是从xCode缓存。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3101516|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

you can try to modify your XIBs a bit, so xCode will detect a modification through the last modified date in file system. then it will load the xib from its actual path, an not from xCode cache.

blocks|key|1816396|text|我知道steve已经找到了解决方法，但问题根本不在XIB文件中。Xcode不会将YouApplication-info.plist文件更新为|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1816397|如果您打开它，您将看到行：主nib文件基本名称。必须更改该值以反映所需的NIB文件名|offset|length|style|BOLD|1816398|entityMap^0|0|D|A|0^^$0|@$1|2|3|4|5|6|7|J|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|K|8|@$D|L|E|M|F|G]]|9|@]|A|$]]|$1|H|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|I|$]]

I know steve has found a work around but the problem is not in the XIB files at all. Xcode does not update the YouApplication-info.plist file to 

If you open it up you will see the line: Main nib file base name. You must change the value to reflect your desired NIB file name

blocks|key|1070145|text|我也有同样的问题，但我通过将系统的日期时间更改为今天来解决它。并重新保存了xib。我在测试本地通知。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1070146|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I had the same problem, but i solved it by changing the datetime of my system to today. And re-saved the xib. I was testing the local notification.

blocks|key|3101600|text|我遇到了这个问题，这是xcode继续复制以前编译过的xib的结果-即使源文件被删除了，构建缓存没有被删除。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3101601|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I had this problem, and it was a result of xcode continuing to copy previously compiled xib's - even though the source file was deleted, the build cache wasn't. Product > Clean and then recompiling solved it.

blocks|key|1070198|text|我刚刚遇到这个问题，只需从模拟器中删除应用程序即可。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1070199|然后对你的项目做一次彻底的清理。|1070200|在xCode中，转到产品菜单，选择清理。|1070201|或者直接按Shift%2BCommand%2BK键！|1070202|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|J|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|K|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|L|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|M|8|@]|9|@]|A|$]]|$1|H|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|I|$]]

I just had this issue, just delete the app from the simulator. 
Then do a clean on your project. 
In xCode,
go to the Product menu,
select Clean.

Or just press Shift+Command+K!

blocks|key|1816467|text|只需使用以下命令清理构建|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1816468|1816469|产品->干净|blockquote|1816470|1816471|1816472|菜单。|1816473|entityMap^0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|M|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|N|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|O|8|@]|9|@]|A|$]]|$1|G|3|-4|5|6|7|P|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|Q|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|R|8|@]|9|@]|A|$]]]|K|$]]

just clean the build using

<blockquote>
 Product -> Clean
</blockquote>

menu.

blocks|key|1816488|text|我刚刚发现(并修复)了一个相关的问题-一个表现出类似症状但其根本原因略有不同的问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1816489|特别是，我观察到的症状是，我的iPad应用程序最初会在第一页显示一个旧的故事板图像，在短暂的延迟之后，会显示最近编辑的故事板内容。我经历了上面大多数的诡计，但都没有效果。|1816490|问题是，iPad加载程序首先只是将应用程序的启动图像静默加载到屏幕上。您通常将此图像设置为XCode中应用程序早期管理设置的一部分。在启动时，当最终用户正在考虑内容并考虑在哪里触摸屏幕时，应用程序同时正在疯狂地准备自己，解压xib/nib/故事板，并做真正的准备工作。|1816491|在理想情况下，提供的启动图像是逐个像素的，与nib-unarchiving+process生成的启动图像相同。但是，如果您在更新故事板之后忘记更新启动图像，您将在解压完成时看到图像偏移。|1816492|我不会怀疑这是一个问题，除非我读过Jef+Raskin的描述，他是如何在Canon+Cat字处理器上做到这一点的，以提供即时就绪的应用程序的错觉:它利用了这样一个事实，即典型的人类对应用程序启动的响应时间大约为7秒-即使是基于软盘的系统也有足够的时间来加载和覆盖加载程序设置的位图外观。有时，阅读一些晦涩难懂的历史是很好的。当然，Jef后来创建了一个名为Macintosh的项目，剩下的就是历史了--还有这个bug。|1816493|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|M|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|N|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|O|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|P|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|K|$]]

I just found (and fixed) a related problem — one that demonstrates similar symptoms but whose root cause is slightly different.

In particular, the symptoms I observed were that my iPad app would initially display an old storyboard image for the first page and, after a short delay, would bring up the most recently edited story board contents. I went through most of the above machinations to no avail.

The problem is that the iPad loader first just dumbly loads your app's launch image into the screen. You usually set up this image as part of the early administrative setup of the app in XCode. At launch time, while the end user is considering the content and cogitating about where to touch the screen, the application is in the mean time madly getting itself ready, un-archiving the xib/nib/storyboard, and doing the real work of getting ready.

In the ideal situation the provided launch image is pixel-for-pixel the same as the one generated by the nib-unarchiving-process. However, if you forgot to update your launch image after updating the story board, you'll see an image shift at the completion of the unarchiving.

I wouldn't have suspected this as the problem except that I had read Jef Raskin's description of how he did exactly this on the Canon Cat word processor to provide the illusion of an instantly ready application: it takes advantage of the fact that the typical human response time to an application startup is on the order of seven seconds — plenty of time for even a floppy-based system to load and overwrite the bitmap facade that the loader sets up. Sometimes, it's good to have read a bit of arcane history. Jef would of course later go on to found a project whose name was Macintosh, and the rest is history — and this bug.

blocks|key|3101784|text|这只是一个假设，不确定这是否是真正的原因:我完成了一个在模拟器和实际设备上都工作得很好的XIB。然后我将其更改为在Xcode+4.5.1中进行本地化。之后我所做的更改没有同步到设备上，直到我手动删除设备上的应用程序并通过Xcode重新安装。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3101785|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Just an assumption, not sure if that really caused it: I finished a XIB that worked fine in the simulator and on an actual device. I then changed it to be localised in Xcode 4.5.1. The changes I did after that were not synced to the device until I manually deleted the app from the device and reinstalled via Xcode.

blocks|key|3101802|text|删除了派生数据，清理了项目和生成。旧的xib被神奇地移除了。:D|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3101803|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Deleted derived data, cleaned project and build. Old xib was magically removed. :D

I've searched all over and haven't found any help...

I built a small test app with two <code>UIViewControllers</code> and their corresponding <code>xibs.</code> Things were fine, then I made some changes to both <code>xibs</code> but when I build and run, I get the old views. I've tried deleting the build folders, running in the simulator and device, cleaning all targets and still the same, old, broke-down <code>xibs</code> that I totally changed are still showing up. I've restarted all the Xcode apps and even my computer.

Getting pretty irritated!

EDIT: I never did figure out what the problem was. Basically, once I had built a project, it remembered the first xibs I made and wouldn't recognize changes to them. If I told a view controller to load from a different, valid nib name, it'd complain that the old one wasn't there.

I reinstalled Xcode and now it all works again. Sheesh.

Xcode shows old, deleted xib files

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

我找遍了也没找到任何帮助...我用两个UIViewControllers和它们对应的xibs.构建了一个小的测试应用程序，然后我对这两个xibs做了一些修改，但当我构建并运行时，我得到了旧的视图。我尝试删除构建文件夹，在模拟器和设备中运行，清除所有目标，但我完全更改的旧的、故障的xibs仍在显示。我已经重启了所有的Xc...

问Xcode显示旧的、已删除的xib文件
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Xcode显示旧的、已删除的xib文件EN