blocks|key|4701042|text|“一行一行”的问题我已经遇到过无数次了。我不知道为什么会发生这种情况，但有一个非常简单的修复方法，每次都对我有效。只需点击清除日志按钮。简单和容易。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4701043|我也遇到过Logcat无法显示消息的情况。通常，这是由于仿真器的问题造成的，需要重新启动仿真器。|4701044|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

I've had that "one line at a time" problem numerous times. I don't know why exactly it happens but there is a very simple fix that works for me every time. Just hit the clear log button. Simple and easy.

I've also had Logcat fail to show messages. Generally this has been due to a problem with the emulator and it required an emulator restart.

blocks|key|3100643|text|是的，我可以通过清除日志来恢复正常的logcat。另外，我在Run/Debug->Console中取消选中"Limit+console+output“。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3100644|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Yes, I can get the normal logcat back by clear the log. Also I uncheck the "Limit console output" in Run/Debug->Console.

blocks|key|3100677|text|在一个真实的设备上(我的是一个有问题的HTC需求)，我发现简单地禁用然后启用ADB并不总是能解决问题。更常用的方法是禁用ADB，关闭页面(可能是后退)，然后重新进入Development页面，然后重新启用调试模式。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3100678|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

On a real Device (mine is an HTC Desire in question) I've found simply disabling then enabling ADB does not always solve it. What works more often is to disable ADB, close the page (perhaps by back) then to renter the Development page, and re-enable debug mode.

blocks|key|3100724|text|我遇到了同样的问题，这里的解决方案对我不起作用。我找到的解决方案是打开DDMS透视图，然后在Devices窗口中选择设备和正在运行的进程。完成此操作后，LogCat将恢复正常运行。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3100725|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I was with the same problem and the solutions here didn't work for me. The solution I found is open the DDMS perspective and select the device and the running process on the Devices window. With that done, the LogCat returns to life.

blocks|key|1870181|text|我用两种不同的方法解决这些LogCat问题：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1870182|1870183|清除日志以一次修复一行问题|ordered-list-item|1870184|打开设备窗口(Window+->+Show+View+->+Other+->+Android+->+Devices)，然后单击我要查看其日志的设备。这似乎会迫使安卓更新该设备上的LogCat。|offset|length|style|CODE|1870185|1870186|这些都是比重启eclipse或搞乱adb简单得多的选择。|1870187|entityMap^0|0|0|0|7|6|H|9|U|5|13|7|1E|7|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|R|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|S|8|@]|9|@]|A|$]]|$1|F|3|G|5|E|7|T|8|@$H|U|I|V|J|K]|$H|W|I|X|J|K]|$H|Y|I|Z|J|K]|$H|10|I|11|J|K]|$H|12|I|13|J|K]]|9|@]|A|$]]|$1|L|3|-4|5|6|7|14|8|@]|9|@]|A|$]]|$1|M|3|N|5|6|7|15|8|@]|9|@]|A|$]]|$1|O|3|-4|5|6|7|16|8|@]|9|@]|A|$]]]|P|$]]

I solve these LogCat issues in two different ways:

<ol>
<li>Clearing the log to fix the one line at a time issue</li>
<li>Opening the devices window (<code>Window</code> -> <code>Show View</code> -> <code>Other</code> -> <code>Android</code> -> <code>Devices</code>), and clicking on the device that I want to view the log for. This seems to force Android to refresh LogCat on that device.</li>
</ol>

These are much easier options than restarting eclipse, or messing with adb.

blocks|key|1034210|text|在eclipse中你需要给日志缓冲区更多的空间，默认是5,000，我将它设置为50000，没有任何问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1034211|窗口->首选项->android>logcat要缓冲的日志消息的最大数量__设置为50k即可|offset|length|style|BOLD|1034212|entityMap^0|0|10|2|0^^$0|@$1|2|3|4|5|6|7|J|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|K|8|@$D|L|E|M|F|G]]|9|@]|A|$]]|$1|H|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|I|$]]

In eclipse you need to give more space to log buffer, default is 5000, i set it to 50000 and no have any problems.

Window->preference->android>logcat
maximum num of log message to buffer __ set some number 50k is ok

blocks|key|3100854|text|我建议在您的首选项中调整Logcat缓冲区大小并启用工作区应用程序消息监控，我的设置如下所示。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3100855|​|3100856|📷|atomic|offset|length|3100857|3100858|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/e329bded9b4a10e1471221dbba6f8855.png|imageAlt^0|0|0|0|1|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|T|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|U|8|@]|9|@$G|V|H|W|1|X]]|A|$]]|$1|I|3|C|5|6|7|Y|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|K|$L|$5|M|N|O|A|$P|Q|R|-4]]]]

I'd recommend adjusting the Logcat buffer size and enable workspace application message monitoring in your preferences, mine are set as seen below.

<img src="https://i.stack.imgur.com/uJRJt.png" alt="eclipse Logcat preferences">

blocks|key|1870238|text|单击“显示保存的过滤器视图”按钮，通过显示LogCat的两个窗格视图，您将能够在左侧窗格中检查活动过滤器。我曾经通过选择“所有消息”来修复空的LogCat。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1870239|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Click "Display saved filters view" button By showing the two-pane view of your LogCat you'll be able to check the active filter in the left-pane. I once fixed the empty LogCat by selecting "All messages".

blocks|key|1866312|text|当logcat停止显示日志条目时，我发现关闭Eclipse并重新打开它为我解决了这个问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1866313|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

When logcat stops displaying log entries, I find that closing Eclipse and re-opening it solves the problem for me.

blocks|key|1866328|text|我也是！我使用的方法是打开DDMS透视图，然后在devices窗格中单击reset+adb|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1866329|entityMap^0|10|9|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|K|8|@]|D|@]|E|$]]]|G|$]]

Same here! What worked for me is open DDMS perspective and on devices pane I clicked 
<code>reset adb</code>

Periodically LogCat will stop showing messages even though I am in debug mode. At other times it will display only one line at a time! I have a solution, restart eclipse. But I would like to understand this better. It takes too much time to restart eclipse when this happens. I have seen this behavior on the emulator and connected to a device. Either the LogCat shows one line with no history or nothing.

LogCat Stops Running in Eclipse Needs Restart

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

即使我处于调试模式，LogCat也会定期停止显示消息。在其他时候，它一次只显示一行！我有一个解决方案，重启eclipse。但我想更好地理解这一点。当发生这种情况时，重新启动eclipse需要花费太多的时间。我已经在模拟器上看到了这种行为，并连接到了一个设备。要么LogCat显示一行没有历史记录，要么什么都没有。

问LogCat在Eclipse中停止运行需要重新启动
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问LogCat在Eclipse中停止运行需要重新启动EN