blocks|key|3393603|text|正如@user132447指出的，您需要将驱动器重新格式化为MacOS扩展(区分大小写)。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3393604|rpm是CentOS的一部分，它与RPM5版本不同。两者是两个不同的项目。以后可能会在MacOS上运行，但我建议您使用虚拟机(或单独的系统)，它们只基于RPM。这肯定会为你节省很长的时间来修复和关心不太有用的问题。|offset|length|3393605|来自rpm.org的RPM还不支持MacOS+(我猜它构建了--至少是最新版本)，这是CentOS使用的rpm。|3393606|entityMap|0|LINK|mutability|MUTABLE|url|http://rpm.org/|1|http://rpm5.org/^0|0|0|3|0|H|4|1|0|0^^$0|@$1|2|3|4|5|6|7|R|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|S|8|@]|9|@$D|T|E|U|1|V]|$D|W|E|X|1|Y]]|A|$]]|$1|F|3|G|5|6|7|Z|8|@]|9|@]|A|$]]|$1|H|3|-4|5|6|7|10|8|@]|9|@]|A|$]]]|I|$J|$5|K|L|M|A|$N|O]]|P|$5|K|L|M|A|$N|Q]]]]

As @user132447 pointed out, you will need to reformat the drive to MacOS extended (case sensitive).

The <a href="http://rpm.org" rel="nofollow">rpm</a> which is part of CentOS is different then the <a href="http://rpm5.org" rel="nofollow">RPM5</a> build. Both are two different projects. And later may work on MacOS, but I would recommend you to go using VMs (or separate systems) which are RPM based only. That will surely save you long hours of fixing and caring about not so useful issues. 

RPM from rpm.org doesn't support MacOS yet (it builds I guess - at least the latest version), and this is the rpm which CentOS uses.

blocks|key|2013523|text|我今天也遇到了同样的情况，但我刚刚成功地构建并运行了rpm，首先安装了MacPorts，然后从那里安装。在构建之前，它需要绝对可笑的1.8+at下载，因为它需要从Apple+Store安装1.6+at的(免费)+Xcode开发人员工具包，然后再安装另一个140MB的命令行工具包。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2013524|因此，首先要仔细地按照这里的清晰说明安装MacPorts：http://www.macports.org/install.php|offset|length|2013525|完成所有这些操作后，请确保运行update命令(如安装说明中所述)，以便它下载可用的软件端口包(如果不这样做，它将显示"can't+find+rpm“)：|2013526|sudo+port+-v+selfupdate|code-block|syntax|javascript|2013527|完成所有操作后，运行以下命令来获取rpm并构建它：|2013528|sudo+port+install+rpm|2013529|在我2011年的早些时候使用Lion的MacBook专业版上，下载所有内容并构建需要大约10分钟。|2013530|整个过程需要一段时间，但它是有效的。祝好运!|2013531|entityMap|0|LINK|mutability|MUTABLE|url|http://www.macports.org/install.php^0|0|T|Z|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|12|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|13|8|@]|9|@$D|14|E|15|1|16]]|A|$]]|$1|F|3|G|5|6|7|17|8|@]|9|@]|A|$]]|$1|H|3|I|5|J|7|18|8|@]|9|@]|A|$K|L]]|$1|M|3|N|5|6|7|19|8|@]|9|@]|A|$]]|$1|O|3|P|5|J|7|1A|8|@]|9|@]|A|$K|L]]|$1|Q|3|R|5|6|7|1B|8|@]|9|@]|A|$]]|$1|S|3|T|5|6|7|1C|8|@]|9|@]|A|$]]|$1|U|3|-4|5|6|7|1D|8|@]|9|@]|A|$]]]|V|$W|$5|X|Y|Z|A|$10|11]]]]

I was in this same situation today, but I've just successfully built and run rpm by first installing MacPorts and then installing from there. It requires an absolutely ludicrous 1.8GB of downloads before you can even build because it requires installing the (free) Xcode developer tools package from the Apple Store at 1.6GB, then another 140MB package of command line tools.

So, first carefully follow every step of the clear instructions here to install MacPorts:
<a href="http://www.macports.org/install.php">http://www.macports.org/install.php</a>

After doing all that, be sure to run the update command (as mentioned in the install instructions) so that it downloads the available software ports package (it'll say "can't find rpm" if you don't):

<pre><code>sudo port -v selfupdate
</code></pre>

Once all that is done, run the following to fetch rpm and build it:

<pre><code>sudo port install rpm
</code></pre>

On my early 2011 MacBook Pro with Lion, it took about 10 minutes to download everything and build.

The whole process takes a while, but it works. Good luck!

blocks|key|2016197|text|我一直在使用RPM+for+Darwin来构建基于maven的项目，这些项目可以创建RPM工件。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|2016198|entityMap|0|LINK|mutability|MUTABLE|url|http://rpm4darwin.sourceforge.net/^0|6|E|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@$A|M|B|N|1|O]]|C|$]]|$1|D|3|-4|5|6|7|P|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]]]

I've been using <a href="http://rpm4darwin.sourceforge.net/" rel="nofollow">RPM for Darwin</a> for building maven based projects that create RPM artifacts.

blocks|key|1326600|text|您可以使用Homebrew包管理器在MacOS上安装rpmbuild。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1326601|brew+install+rpm|code-block|syntax|javascript|1326602|这将安装一系列包，包括用于构建rpm的rpmbuild。然后，您可以运行以下命令来创建rpm|1326603|rpmbuild+<specfile>|1326604|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|N|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|O|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

You can install rpmbuild on MacOS using Homebrew package manager. 

<pre><code>brew install rpm
</code></pre>

This installs a bunch of packages including rpmbuild which is used to build an rpm. You can then run the following command to create an rpm

<pre><code>rpmbuild &lt;specfile&gt;
</code></pre>

I'm running Mac OS X 10.6.6. I have some data-only RPMs that I'd like to build.

Until recently I've done most of my development on a VM running CentOS, but one by one I've been able to transition these tasks to the Mac proper. I've been using <a href="http://www.finkproject.org/">Fink</a> to access the Open/Free tools I need, but I'm not ready to go to Fink unstable, where the RPM5 package has been for a while.

I've also tried to build the RPM utilities from source, with little luck so far.

Is anyone else building RPMs natively on a Mac? If so, how?

How can I build an RPM on my MacOS system?

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋 

腾讯云代码助手

CODING DevOps

Cloud Studio

SDK中心

API中心

命令行工具

我运行的是Mac OS X 10.6.6。我有一些仅限数据的RPM，我想构建它们。直到最近，我的大部分开发都是在运行CentOS的虚拟机上完成的，但我已经能够一个接一个地将这些任务转移到Mac上。我一直在使用访问我需要的开放/免费工具，但我还没有准备好去Fink unstable，RPM5包已经存在了一段时间了。我还尝...

问如何在我的MacOS系统上构建一个RPM？
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何在我的MacOS系统上构建一个RPM？EN