blocks|key|557455|text|试试这样的东西|type|unstyled|depth|inlineStyleRanges|entityRanges|data|557456|echo+"yours+ip+addresses+are:"
ifconfig+%7C+grep+"inet+addr"+%7C+cut+-d':'+-f2+%7C+cut+-d'+'+-f1|code-block|syntax|javascript|557457|类似linux的系统|557458|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

try something like this

<pre><code>echo "yours ip addresses are:"
ifconfig | grep "inet addr" | cut -d':' -f2 | cut -d' ' -f1
</code></pre>

linux like systems

blocks|key|2459019|text|假设您提到的windows操作系统是I+p配置|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|2459020|如果你愿意安装一些Unixy工具，比如windows-port+of+grep和cut，你可以这样做。然而，在使用ipconfig的示例中，如果机器有多个NIC或VMWare，情况会变得一团糟。|2459021|Powershell可能是你想要的工具，看看here的例子。|2459022|entityMap|0|LINK|mutability|MUTABLE|url|http://www.computerperformance.co.uk/powershell/powershell_ipconfig.htm^0|K|1|0|0|M|4|0|0^^$0|@$1|2|3|4|5|6|7|R|8|@$9|S|A|T|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|U|8|@]|D|@]|E|$]]|$1|H|3|I|5|6|7|V|8|@]|D|@$9|W|A|X|1|Y]]|E|$]]|$1|J|3|-4|5|6|7|Z|8|@]|D|@]|E|$]]]|K|$L|$5|M|N|O|E|$P|Q]]]]

Assuming a windows OS as you mention i p config

If you're willing to install some Unixy utilities like a windows-port of grep and cut you can do that. However, in cases like your example with ipconfig it will be a mess in machines with multiple NICs or e.g VMWare.

Powershell might be the tool you want, look <a href="http://www.computerperformance.co.uk/powershell/powershell_ipconfig.htm" rel="nofollow">here</a> for a example.

blocks|key|557520|text|单独提取地址有点困难，但您可以很容易地获得整个IP地址行。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|557521|要在任何英语Windows操作系统上显示所有IP地址，请执行以下操作：|557522|ipconfig+%7C+findstr+/R+/C:"IP.*+Address"|code-block|syntax|javascript|557523|要在addresses+7%2B上仅显示IPv4或IPv6地址：|557524|ipconfig+%7C+findstr+/R+/C:"IPv4+Address"

ipconfig+%7C+findstr+/R+/C:"IPv6+Address"|557525|以下是带有3个网络适配器的XP机器的一些示例输出。|557526|++++++++IP+Address.+.+.+.+.+.+.+.+.+.+.+.+:+192.168.1.10
++++++++IP+Address.+.+.+.+.+.+.+.+.+.+.+.+:+10.6.102.205
++++++++IP+Address.+.+.+.+.+.+.+.+.+.+.+.+:+192.168.56.1|557527|entityMap^0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|T|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|U|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|V|8|@]|9|@]|A|$]]|$1|K|3|L|5|F|7|W|8|@]|9|@]|A|$G|H]]|$1|M|3|N|5|6|7|X|8|@]|9|@]|A|$]]|$1|O|3|P|5|F|7|Y|8|@]|9|@]|A|$G|H]]|$1|Q|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|R|$]]

Extracting the address all by itself is a bit difficult, but you can get the entire IP Address line easily.

To show all IP addresses on any English-language Windows OS:

<pre><code>ipconfig | findstr /R /C:"IP.* Address"
</code></pre>

To show only IPv4 or IPv6 addresses on Windows 7+:

<pre><code>ipconfig | findstr /R /C:"IPv4 Address"

ipconfig | findstr /R /C:"IPv6 Address"
</code></pre>

Here's some sample output from an XP machine with 3 network adapters.

<pre><code> IP Address. . . . . . . . . . . . : 192.168.1.10
 IP Address. . . . . . . . . . . . : 10.6.102.205
 IP Address. . . . . . . . . . . . : 192.168.56.1
</code></pre>

blocks|key|4252322|text|这将在ipconfig的输出中打印IP地址|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|4252323|@echo+off
set+ip_address_string="IPv4+Address"
rem+Uncomment+the+following+line+when+using+older+versions+of+Windows+without+IPv6+support+(by+removing+"rem")
rem+set+ip_address_string="IP+Address"
echo+Network+Connection+Test
for+/f+"usebackq+tokens=2+delims=:"+%25%25f+in+(`ipconfig+%5E%7C+findstr+/c:%25ip_address_string%25`)+do+echo+Your+IP+Address+is:+%25%25f|code-block|syntax|javascript|4252324|要只打印第一个IP地址，只需在回显后面添加goto+:eof+(或其他要跳转到的标签，而不是:eof)，或者以更易读的形式添加：|4252325|set+ip_address_string="IPv4+Address"
rem+Uncomment+the+following+line+when+using+older+versions+of+Windows+without+IPv6+support+(by+removing+"rem")
rem+set+ip_address_string="IP+Address"
for+/f+"usebackq+tokens=2+delims=:"+%25%25f+in+(`ipconfig+%5E%7C+findstr+/c:%25ip_address_string%25`)+do+(
++++echo+Your+IP+Address+is:+%25%25f
++++goto+:eof
)|4252326|一种更具可配置性的方法是实际解析一下ipconfig+/all的输出，这样您甚至可以指定想要其IP地址的适配器：|4252327|@echo+off
setlocal+enabledelayedexpansion
::just+a+sample+adapter+here:
set+"adapter=Ethernet+adapter+VirtualBox+Host-Only+Network"
set+adapterfound=false
echo+Network+Connection+Test
for+/f+"usebackq+tokens=1-2+delims=:"+%25%25f+in+(`ipconfig+/all`)+do+(
++++set+"item=%25%25f"
++++if+/i+"!item!"=="!adapter!"+(
++++++++set+adapterfound=true
++++)+else+if+not+"!item!"=="!item:IP+Address=!"+if+"!adapterfound!"=="true"+(
++++++++echo+Your+IP+Address+is:+%25%25g
++++++++set+adapterfound=false
++++)
)|4252328|entityMap^0|3|8|0|0|L|9|1A|4|0|0|I|D|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@$9|V|A|W|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|X|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|Y|8|@$9|Z|A|10|B|C]|$9|11|A|12|B|C]]|D|@]|E|$]]|$1|M|3|N|5|H|7|13|8|@]|D|@]|E|$I|J]]|$1|O|3|P|5|6|7|14|8|@$9|15|A|16|B|C]]|D|@]|E|$]]|$1|Q|3|R|5|H|7|17|8|@]|D|@]|E|$I|J]]|$1|S|3|-4|5|6|7|18|8|@]|D|@]|E|$]]]|T|$]]

This will print the IP addresses in the output of <code>ipconfig</code>:

<pre><code>@echo off
set ip_address_string="IPv4 Address"
rem Uncomment the following line when using older versions of Windows without IPv6 support (by removing "rem")
rem set ip_address_string="IP Address"
echo Network Connection Test
for /f "usebackq tokens=2 delims=:" %%f in (`ipconfig ^| findstr /c:%ip_address_string%`) do echo Your IP Address is: %%f
</code></pre>

To only print the first IP address, just add <code>goto :eof</code> (or another label to jump to instead of <code>:eof</code>) after the echo, or in a more readable form:

<pre><code>set ip_address_string="IPv4 Address"
rem Uncomment the following line when using older versions of Windows without IPv6 support (by removing "rem")
rem set ip_address_string="IP Address"
for /f "usebackq tokens=2 delims=:" %%f in (`ipconfig ^| findstr /c:%ip_address_string%`) do (
 echo Your IP Address is: %%f
 goto :eof
)
</code></pre>

A more configurable way would be to actually parse the output of <code>ipconfig /all</code> a little bit, that way you can even specify the adapter whose IP address you want:

<pre><code>@echo off
setlocal enabledelayedexpansion
::just a sample adapter here:
set "adapter=Ethernet adapter VirtualBox Host-Only Network"
set adapterfound=false
echo Network Connection Test
for /f "usebackq tokens=1-2 delims=:" %%f in (`ipconfig /all`) do (
 set "item=%%f"
 if /i "!item!"=="!adapter!" (
 set adapterfound=true
 ) else if not "!item!"=="!item:IP Address=!" if "!adapterfound!"=="true" (
 echo Your IP Address is: %%g
 set adapterfound=false
 )
)
</code></pre>

blocks|key|2459100|text|我知道这是一个更老的帖子，但我在尝试用vbscript解决同样的问题时遇到了这个问题。我还没有在多个网络适配器上测试过这一点，但我希望它能有所帮助。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2459101|for+/f+"delims=:+tokens=2"+%25%25a+in+('ipconfig+%5E%7C+findstr+/R+/C:"IPv4+Address"')+do+(set+tempip=%25%25a)++
set+tempip=%25tempip:+=%25++
echo+%25tempip%25|code-block|syntax|javascript|2459102|这里假设是Win7。对于XP，请用IP+Address替换IPv4+Address。|offset|length|style|CODE|2459103|entityMap^0|0|0|H|A|T|C|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Q|8|@$I|R|J|S|K|L]|$I|T|J|U|K|L]]|9|@]|A|$]]|$1|M|3|-4|5|6|7|V|8|@]|9|@]|A|$]]]|N|$]]

I know this is an older post but I ran across this while trying to solve the same problem in vbscript. I haven't tested this with mulitple network adapters but hope that it's helpful nonetheless.

<pre><code>for /f "delims=: tokens=2" %%a in ('ipconfig ^| findstr /R /C:"IPv4 Address"') do (set tempip=%%a) 
set tempip=%tempip: =% 
echo %tempip%
</code></pre>

This assumes Win7. For XP, replace <code>IPv4 Address</code> with <code>IP Address</code>.

blocks|key|557640|text|使用IPCONFIG是很好的，除非您想要获得除本地主机之外的远程主机的IP。要使用PING从www.google.com之类的东西获取它，请尝试：|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|557641|for+/f+"tokens=2+delims=[]"+%25%25f+in+('ping+-4+-n+1+www.google.com+%5E%7Cfind+/i+"pinging"')+do+echo+IP=%25%25f|code-block|syntax|javascript|557642|该示例的结果为：|557643|IP=173.194.73.106|557644|要获取本地主机的第一个IP，请将"www.google.com“替换为"%25computername%25”，不带引号。注意:前面的"-4“将始终获得IPv4地址，而不是可能的IPv6地址。根据需要省略。另请注意，此技术不能获取多个IP地址。如果这是您的目标，您将需要使用NSLOOKUP和一些额外的代码。|557645|请注意，如果您使用NSLOOKUP而不是PING，并且主机有多个IP地址，那么您的变量末尾将有一个逗号，因为每个地址将由逗号分隔。|557646|entityMap^0|2|8|15|4|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@$9|V|A|W|B|C]|$9|X|A|Y|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|Z|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|10|8|@]|D|@]|E|$]]|$1|M|3|N|5|H|7|11|8|@]|D|@]|E|$I|J]]|$1|O|3|P|5|6|7|12|8|@]|D|@]|E|$]]|$1|Q|3|R|5|6|7|13|8|@]|D|@]|E|$]]|$1|S|3|-4|5|6|7|14|8|@]|D|@]|E|$]]]|T|$]]

Using <code>IPCONFIG</code> is good, unless you want the flexibility of getting the IP of a remote host in addition to the local host. To get it from something like www.google.com using <code>PING</code> try:

<pre><code>for /f "tokens=2 delims=[]" %%f in ('ping -4 -n 1 www.google.com ^|find /i "pinging"') do echo IP=%%f
</code></pre>

The result for that example is:

<pre><code>IP=173.194.73.106
</code></pre>

To get the first IP of your local host, replace "www.google.com" with "%computername%" without the quotes. Note the "-4" in front will always get the IPv4 address instead of a possible IPv6 address. Omit as needed. Note also that this technique cannot get more than one IP address. If that is your goal, you'll need to use NSLOOKUP with some extra code.

Mind you, if you use NSLOOKUP instead of PING, and the host has more than one IP address, then your variable will have a comma at the end, since each address will be separated by a comma.

blocks|key|2459154|text|在Windows+7中：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2459155|for+/f+"tokens=1-2+delims=:"+%25%25a+in+('ipconfig%5E%7Cfind+"IPv4"')+do+set+ip=%25%25b
set+ip=%25ip:~1%25
echo+%25ip%25
pause|code-block|syntax|javascript|2459156|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

In Windows 7:

<pre><code>for /f "tokens=1-2 delims=:" %%a in ('ipconfig^|find "IPv4"') do set ip=%%b
set ip=%ip:~1%
echo %ip%
pause
</code></pre>

blocks|key|557691|text|这是对@mousio答案的修改。我的网络连接不是持久的，因此如果ipconfig中缺少字符串"IPv4+Address“，则会显示下一个适配器的IP地址。ipconfig的结果是适配器之间有两个空格。在找到适配器并且在"IPv4+Address“文本之前出现两个空白行后，它会认为它丢失了。仅在64位Windows+7上测试。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|557692|处理@dbenham的答案中的空行：DOS+batch+FOR+loop+with+FIND.exe+is+stripping+out+blank+lines?|offset|length|557693|@echo+off

rem+---+complete+adapter+name+to+find+without+the+ending+":"+---
set+adapter=Wireless+LAN+adapter+Wireless+Network+Connection

rem+---+token+under+an+adapter+to+extract+IP+address+from+---
set+IPAddrToken=IPv4+Address

setlocal+enableextensions+enabledelayedexpansion
set+adapterfound=false
set+emptylines=0
set+ipaddress=

for+/f+"usebackq+tokens=1-3+delims=:"+%25%25e+in+(`ipconfig+%5E%7C+findstr+/n+"%5E"`)+do+(

++++set+"item=%25%25f"

++++if+/i+"!item!"=="!adapter!"+(
++++++++set+adapterfound=true
++++++++set+emptylines=0
++++)+else+if+not+"!item!"==""+if+not+"!item!"=="!item:%25IPAddrToken%25=!"+if+"!adapterfound!"=="true"+(
++++++++@rem+"!item:%25IPAddrToken%25=!"+-->+item+with+"IPv4+Address"+removed
++++++++set+ipaddress=%25%25g
++++++++goto+:result
++++)
++++if+"%25%25f-%25%25g-!adapterfound!-!emptylines!"=="--true-1"+(
++++++++@rem+2nd+blank+line+after+adapter+found
++++++++goto+:result
++++)
++++if+"%25%25f-%25%25g-!adapterfound!-!emptylines!"=="--true-0"+(
++++++++@rem+1st+blank+line+after+adapter+found
++++++++set+emptylines=1
++++)
)

endlocal

:result
++++echo+%25adapter%25
++++echo.
++++if+not+"%25ipaddress%25"==""+(
++++++++echo++++%25IPAddrToken%25+=%25ipaddress%25
++++)+else+(
++++++++if+"%25adapterfound%25"=="true"+(
++++++++++++echo++++%25IPAddrToken%25+Not+Found
++++++++)+else+(
++++++++++++echo++++Adapter+Not+Found
++++++++)
++++)
++++echo.

pause|code-block|syntax|javascript|557694|entityMap|0|LINK|mutability|MUTABLE|url|https://stackoverflow.com/questions/8811992/dos-batch-for-loop-with-find-exe-is-stripping-out-blank-lines^0|0|I|1Q|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|T|8|@]|9|@$D|U|E|V|1|W]]|A|$]]|$1|F|3|G|5|H|7|X|8|@]|9|@]|A|$I|J]]|$1|K|3|-4|5|6|7|Y|8|@]|9|@]|A|$]]]|L|$M|$5|N|O|P|A|$Q|R]]]]

This is a modification of @mousio's answer. My network connection is not persistent hence the IP address of the next adapter gets displayed if the string "IPv4 Address" is missing from ipconfig. The result of ipconfig has 2 blank spaces between adapters. After an adapter is found and 2 blank lines occurs before the "IPv4 Address" text, it assumes it is missing. Tested on Windows 7 64-bit only.

Processing blank lines from @dbenham's answer in:
<a href="https://stackoverflow.com/questions/8811992/dos-batch-for-loop-with-find-exe-is-stripping-out-blank-lines">DOS batch FOR loop with FIND.exe is stripping out blank lines?</a>

<pre><code>@echo off

rem --- complete adapter name to find without the ending ":" ---
set adapter=Wireless LAN adapter Wireless Network Connection

rem --- token under an adapter to extract IP address from ---
set IPAddrToken=IPv4 Address

setlocal enableextensions enabledelayedexpansion
set adapterfound=false
set emptylines=0
set ipaddress=

for /f "usebackq tokens=1-3 delims=:" %%e in (`ipconfig ^| findstr /n "^"`) do (

 set "item=%%f"

 if /i "!item!"=="!adapter!" (
 set adapterfound=true
 set emptylines=0
 ) else if not "!item!"=="" if not "!item!"=="!item:%IPAddrToken%=!" if "!adapterfound!"=="true" (
 @rem "!item:%IPAddrToken%=!" --&gt; item with "IPv4 Address" removed
 set ipaddress=%%g
 goto :result
 )
 if "%%f-%%g-!adapterfound!-!emptylines!"=="--true-1" (
 @rem 2nd blank line after adapter found
 goto :result
 )
 if "%%f-%%g-!adapterfound!-!emptylines!"=="--true-0" (
 @rem 1st blank line after adapter found
 set emptylines=1
 )
)

endlocal

:result
 echo %adapter%
 echo.
 if not "%ipaddress%"=="" (
 echo %IPAddrToken% =%ipaddress%
 ) else (
 if "%adapterfound%"=="true" (
 echo %IPAddrToken% Not Found
 ) else (
 echo Adapter Not Found
 )
 )
 echo.

pause
</code></pre>

blocks|key|2177488|text|以下所有操作都是在Windows+XP机器上用cygwin完成的。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2177489|这将获得您的IP地址。请注意，hostname命令两边有反引号，而不是单引号。|2177490|ping+-n+1+`hostname`+%7C+grep+"Reply+from+"+%7C+cut+-f+3+-d+"+"+%7C+cut+-f+1+-d+":"|code-block|syntax|javascript|2177491|这将获得您的子网。|2177492|ping+-n+1+`hostname`+%7C+grep+"Reply+from+"+%7C+cut+-f+3+-d+"+"+%7C+cut+-f+"1+2+3"+-d+"."|2177493|下面将列出本地网络上的所有主机(将其放入名为“netmap”的脚本中)。我将上面的子网行放入一个名为“getsubnet.”的可执行文件中，然后从下面的脚本中调用它。|2177494|MINADDR=0
MAXADDR=255
SUBNET=`getsubnet`

hostcnt=0

echo+Pinging+all+addresses+in+${SUBNET}.${MINADDR}-${MAXADDR}

for+i+in+`seq+$MINADDR+$MAXADDR`;+do
addr=${SUBNET}.$i
ping+-n+1+-w+0+$addr+>+/dev/null

if+[+$?+-ne+1+]++++
then++++
echo+$addr+UP++++
hostcnt=$((hostcnt%2B1))++++
fi

done

echo+Found+$hostcnt+hosts+on+subnet+${SUBNET}.${MINADDR}-${MAXADDR}|2177495|entityMap^0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|T|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|U|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|V|8|@]|9|@]|A|$]]|$1|K|3|L|5|F|7|W|8|@]|9|@]|A|$G|H]]|$1|M|3|N|5|6|7|X|8|@]|9|@]|A|$]]|$1|O|3|P|5|F|7|Y|8|@]|9|@]|A|$G|H]]|$1|Q|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|R|$]]

The following was all done in cygwin on a Windows XP box.

This will get your IP address. Note that there are backquotes around the hostname command, not single quotes.

<pre><code>ping -n 1 `hostname` | grep "Reply from " | cut -f 3 -d " " | cut -f 1 -d ":"
</code></pre>

This will get your subnet.

<pre><code>ping -n 1 `hostname` | grep "Reply from " | cut -f 3 -d " " | cut -f "1 2 3" -d "."
</code></pre>

The following will list all hosts on your local network (put it into a script called "netmap"). I had taken the subnet line above and put it into an executable called "getsubnet", which I then called from the following script.

<pre><code>MINADDR=0
MAXADDR=255
SUBNET=`getsubnet`

hostcnt=0

echo Pinging all addresses in ${SUBNET}.${MINADDR}-${MAXADDR}

for i in `seq $MINADDR $MAXADDR`; do
addr=${SUBNET}.$i
ping -n 1 -w 0 $addr &gt; /dev/null

if [ $? -ne 1 ] 
then 
echo $addr UP 
hostcnt=$((hostcnt+1)) 
fi

done

echo Found $hostcnt hosts on subnet ${SUBNET}.${MINADDR}-${MAXADDR}
</code></pre>

blocks|key|4252498|text|下面的脚本将ip地址存储到变量ip_address中|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4252499|@echo+off

call+:get_ip_address
echo+%25ip_address%25

goto+:eof

REM
REM+get+the+ip+address
REM
:get_ip_address
FOR+/f+"tokens=1+delims=:"+%25%25d+IN+('ping+%25computername%25+-4+-n+1+%5E%7C+find+/i+"reply"')+do+(FOR+/F+"tokens=3+delims=+"+%25%25g+IN+("%25%25d")+DO+set+ip_address=%25%25g)

goto+:eof|code-block|syntax|javascript|4252500|来自this+blog+post的想法。|offset|length|4252501|entityMap|0|LINK|mutability|MUTABLE|url|http://ayesamson.com/2011/06/13/get-ip-address-from-windows-command-line/^0|0|0|2|E|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|T|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|U|8|@]|9|@$I|V|J|W|1|X]]|A|$]]|$1|K|3|-4|5|6|7|Y|8|@]|9|@]|A|$]]]|L|$M|$5|N|O|P|A|$Q|R]]]]

Below script will store the ip address to the variable ip_address

<pre><code>@echo off

call :get_ip_address
echo %ip_address%

goto :eof

REM
REM get the ip address
REM
:get_ip_address
FOR /f "tokens=1 delims=:" %%d IN ('ping %computername% -4 -n 1 ^| find /i "reply"') do (FOR /F "tokens=3 delims= " %%g IN ("%%d") DO set ip_address=%%g)

goto :eof
</code></pre>

Ideas from <a href="http://ayesamson.com/2011/06/13/get-ip-address-from-windows-command-line/" rel="nofollow">this blog post</a>.

blocks|key|2459304|text|下面的代码可以在从Windows+XP开始的任何平台的任何区域设置上工作，它会从(或多或少)随机的网卡中查找网络IP。它永远不会超过几毫秒。|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|2459305|for+/f+"delims=[]+tokens=2"+%25%25a+in+('ping+-4+-n+1+%25ComputerName%25+%5E%7C+findstr+[')+do+set+NetworkIP=%25%25a
echo+Network+IP:+%25NetworkIP%25|code-block|syntax|javascript|2459306|下面的代码将查找您的公网IP，并在Windows7及更新版本的机器上运行。|2459307|for+/f+%25%25a+in+('powershell+Invoke-RestMethod+api.ipify.org')+do+set+PublicIP=%25%25a
echo+Public+IP:+%25PublicIP%25++|2459308|您可以在my+blog上找到这些命令的详细说明。|2459309|entityMap|0|LINK|mutability|MUTABLE|url|https://blog.fabioiotti.com/ip-address-batch/^0|1I|4|0|0|A|4|0|0|4|7|0|0^^$0|@$1|2|3|4|5|6|7|Y|8|@$9|Z|A|10|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|11|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|12|8|@$9|13|A|14|B|C]]|D|@]|E|$]]|$1|M|3|N|5|H|7|15|8|@]|D|@]|E|$I|J]]|$1|O|3|P|5|6|7|16|8|@]|D|@$9|17|A|18|1|19]]|E|$]]|$1|Q|3|-4|5|6|7|1A|8|@]|D|@]|E|$]]]|R|$S|$5|T|U|V|E|$W|X]]]]

The following code works on any locale of any platform since Windows XP and it looks for the network IP from a (more or less) random of your network cards. It will never take longer than a few milliseconds.

<pre><code>for /f "delims=[] tokens=2" %%a in ('ping -4 -n 1 %ComputerName% ^| findstr [') do set NetworkIP=%%a
echo Network IP: %NetworkIP%
</code></pre>

The following one looks for your public IP instead and works on Windows 7 and newer machines.

<pre><code>for /f %%a in ('powershell Invoke-RestMethod api.ipify.org') do set PublicIP=%%a
echo Public IP: %PublicIP% 
</code></pre>

You can find detailed explanations of these commands on <a href="https://blog.fabioiotti.com/ip-address-batch/" rel="noreferrer">my blog</a>.

blocks|key|2177608|text|即使您有虚拟网络适配器或VPN连接，也可以这样做：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2177609|FOR+/F+"tokens=4+delims=+"+%25%25i+in+('route+print+%5E%7C+find+"+0.0.0.0"')+do+set+localIp=%25%25i
echo+Your+IP+Address+is:+%25localIp%25|code-block|syntax|javascript|2177610|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

This work even if you have a virtual network adapters or VPN connections:

<pre><code>FOR /F "tokens=4 delims= " %%i in ('route print ^| find " 0.0.0.0"') do set localIp=%%i
echo Your IP Address is: %localIp%
</code></pre>

blocks|key|4252591|text|@echo+off

FOR+/F+"tokens=4+delims=+"+%25%25i+in+('route+print+%5E%7C+find+"+0.0.0.0"')+do+set+localIp=%25%25i

echo+Your+IP+Address+is:+%25localIp%25|type|code-block|depth|inlineStyleRanges|entityRanges|data|syntax|javascript|4252592|unstyled|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|G|8|@]|9|@]|A|$B|C]]|$1|D|3|-4|5|E|7|H|8|@]|9|@]|A|$]]]|F|$]]

<pre><code>@echo off

FOR /F "tokens=4 delims= " %%i in ('route print ^| find " 0.0.0.0"') do set localIp=%%i

echo Your IP Address is: %localIp%
</code></pre>

blocks|key|557848|text|如果你只想要ip地址，试试这个：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|557849|#Variable+to+store+ip+address
ipaddr=$(hostname+-I)

echo+"$ipaddr"|code-block|syntax|javascript|557850|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

if you just want the ip address try this:

<pre><code>#Variable to store ip address
ipaddr=$(hostname -I)

echo "$ipaddr"
</code></pre>

blocks|key|2459410|text|在linux环境下：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2459411|ip="$(ifconfig+eth0+%7C+grep+"inet+addr:"+%7C+awk+'{print+$2}'+%7C+cut+-d+':'+-f+2)"|code-block|syntax|javascript|2459412|或|2459413|ip="$(ifconfig+eth0+%7C+grep+"inet+addr:"+%7C+awk+'{print+$2}'+%7C+cut+-d+':'+-f+2)"+%7C+echo+$ip|2459414|FreeBSD中的示例：|2459415|ifconfig+re0+%7C+grep+-v+"inet6"+%7C+grep+-i+"inet"+%7C+awk+'{print+$2}'|2459416|如果您配置了多个IP地址，则在stdout中将有多个IP地址。|2459417|entityMap^0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|T|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|U|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|V|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|W|8|@]|9|@]|A|$]]|$1|M|3|N|5|D|7|X|8|@]|9|@]|A|$E|F]]|$1|O|3|P|5|6|7|Y|8|@]|9|@]|A|$]]|$1|Q|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|R|$]]

In linux environment:

<pre><code>ip="$(ifconfig eth0 | grep "inet addr:" | awk '{print $2}' | cut -d ':' -f 2)"
</code></pre>

or

<pre><code>ip="$(ifconfig eth0 | grep "inet addr:" | awk '{print $2}' | cut -d ':' -f 2)" | echo $ip
</code></pre>

example in FreeBSD:

<pre><code>ifconfig re0 | grep -v "inet6" | grep -i "inet" | awk '{print $2}'
</code></pre>

If you have more than one IP address configured, you will have more than one IP address in stdout.

blocks|key|4252688|text|在Windows中使用一行命令来获取IP地址。|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|4252689|for+/F+"tokens=14"+%25%25i+in+('"ipconfig+%7C+findstr+IPv4"')+do+SET+LOCAL_IP=%25%25i|code-block|syntax|javascript|4252690|执行此命令后，echo+%25LOCAL_IP%25将打印ip地址。或者，您可以在批处理脚本中使用%25LOCAL_IP%25作为引用变量|CODE|4252691|entityMap^0|B|C|0|0|0|1P|7|F|19|A|0^^$0|@$1|2|3|4|5|6|7|P|8|@$9|Q|A|R|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|S|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|T|8|@$9|U|A|V|B|C]|$9|W|A|X|B|M]|$9|Y|A|Z|B|M]]|D|@]|E|$]]|$1|N|3|-4|5|6|7|10|8|@]|D|@]|E|$]]]|O|$]]

One line command in Windows to get the IP Address.

<pre><code>for /F "tokens=14" %%i in ('"ipconfig | findstr IPv4"') do SET LOCAL_IP=%%i
</code></pre>

After this command <code>echo %LOCAL_IP%</code> will print the ip address. Or you can use <code>%LOCAL_IP%</code> as reference variable in your batch script

blocks|key|557986|text|tldr；|type|unstyled|depth|inlineStyleRanges|entityRanges|data|557987|我无法在我的用例中使用上述答案中的任何一个，所以我使用以下命令来获取我的以太网适配器的ip地址，并回显上面问题中提到的ip地址。|557988|在命令行中：|557989|for+/f+"tokens=3+delims=:+"+%25i++in+('netsh+interface+ip+show+config+name%5E="Ethernet"+%5E%7C+findstr+"IP+Address"')+do+echo+Your+IP+Address+is:+%25i|code-block|syntax|javascript|557990|或在批处理文件中：|557991|for+/f+"tokens=3+delims=:+"+%25%25i++in+('netsh+interface+ip+show+config+name%5E="Wi-Fi"+%5E%7C+findstr+"IP+Address"+%5E%7C+findstr+[0-9]')+do+set+IP=%25%25i|557992|对于那些想知道这一切意味着什么的人，请继续阅读|557993|例如，使用ipconfig的大多数命令只是打印出所有的IP地址，而我需要一个特定的IP地址，在我的例子中是用于我的以太网适配器的。|offset|length|style|CODE|557994|您可以使用netsh+interface+ipv4+show+interfaces命令查看您的网络适配器列表。大多数人需要Wi-Fi或以太网。|557995|您将在命令提示符的输出中看到如下所示的表：|557996|Idx+++++Met+++++++++MTU++++++++++State++++++++++++++++Name
---++----------++----------++------------++---------------------------
++1++++++++++75++4294967295++connected+++++Loopback+Pseudo-Interface+1
+15++++++++++25++++++++1500++connected+++++Ethernet
+17++++++++5000++++++++1500++connected+++++vEthernet+(Default+Switch)
+32++++++++++15++++++++1500++connected+++++vEthernet+(DockerNAT)|557997|在名称栏中，您应该可以找到所需的网络适配器(如以太网、Wi-Fi等)。|557998|如前所述，在我的案例中，我对Ethernet很感兴趣。|557999|要获取该适配器的IP，我们可以使用netsh命令：|558000|netsh+interface+ip+show+config+name="Ethernet"|558001|这将为我们提供以下输出：|558002|Configuration+for+interface+"Ethernet"
++++DHCP+enabled:+++++++++++++++++++++++++Yes
++++IP+Address:+++++++++++++++++++++++++++169.252.27.59
++++Subnet+Prefix:++++++++++++++++++++++++169.252.0.0/16+(mask+255.255.0.0)
++++InterfaceMetric:++++++++++++++++++++++25
++++DNS+servers+configured+through+DHCP:++None
++++Register+with+which+suffix:+++++++++++Primary+only
++++WINS+servers+configured+through+DHCP:+None|558003|(出于安全考虑，我伪造了上面的实际IP地址)|558004|我可以在ms-dos命令提示符下使用findstr命令进一步指定我想要的行。在这里，我想要包含字符串IP+Address的行。|558005|netsh+interface+ip+show+config+name="Ethernet"+%7C+findstr+"IP+Address"|558006|这将产生以下输出：|558007|+IP+Address:+++++++++++++++++++++++++++169.252.27.59|558008|然后，我可以使用for命令解析文件(在本例中是多行字符串)，并根据分隔符和我感兴趣的项目编号拆分字符串的内容。|558009|请注意，我正在查找第三项(tokens=3)，并且我使用空格字符和:作为分隔符(delims=:+)。|558010|for+/f+"tokens=3+delims=:+"+%25i++in+('netsh+interface+ip+show+config+name%5E="Ethernet"+%5E%7C+findstr+"IP+Address"')+do+echo+Your+IP+Address+is:+%25i|558011|循环中的每个值或标记都打印为变量%25i，但我只对第三个“标记”或项感兴趣(因此是tokens=3)。请注意，我必须使用%5E来转义%7C和=|558012|在for命令的末尾，您可以指定要与返回的内容一起运行的命令。在本例中，我使用echo将其与其他一些文本一起打印出来，但是您也可以使用do+set+IP=%25i或您喜欢的任何方式将该值赋给一个环境变量。|558013|很整洁，是吧？|558014|如果你有任何改进的想法，请留下评论。我很想听你说:)或者你可以直接编辑。|558015|entityMap^0|0|0|0|0|0|0|0|5|8|0|5|10|0|0|0|0|E|8|0|0|0|1A|0|0|0|0|I|7|1E|A|0|0|0|0|8|3|0|X|1|14|8|0|0|13|8|1M|1|1Q|1|1S|1|0|1|3|12|4|1U|C|0|0|0^^$0|@$1|2|3|4|5|6|7|24|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|25|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|26|8|@]|9|@]|A|$]]|$1|F|3|G|5|H|7|27|8|@]|9|@]|A|$I|J]]|$1|K|3|L|5|6|7|28|8|@]|9|@]|A|$]]|$1|M|3|N|5|H|7|29|8|@]|9|@]|A|$I|J]]|$1|O|3|P|5|6|7|2A|8|@]|9|@]|A|$]]|$1|Q|3|R|5|6|7|2B|8|@$S|2C|T|2D|U|V]]|9|@]|A|$]]|$1|W|3|X|5|6|7|2E|8|@$S|2F|T|2G|U|V]]|9|@]|A|$]]|$1|Y|3|Z|5|6|7|2H|8|@]|9|@]|A|$]]|$1|10|3|11|5|H|7|2I|8|@]|9|@]|A|$I|J]]|$1|12|3|13|5|6|7|2J|8|@]|9|@]|A|$]]|$1|14|3|15|5|6|7|2K|8|@$S|2L|T|2M|U|V]]|9|@]|A|$]]|$1|16|3|17|5|6|7|2N|8|@]|9|@]|A|$]]|$1|18|3|19|5|6|7|2O|8|@$S|2P|T|2Q|U|V]]|9|@]|A|$]]|$1|1A|3|1B|5|6|7|2R|8|@]|9|@]|A|$]]|$1|1C|3|1D|5|H|7|2S|8|@]|9|@]|A|$I|J]]|$1|1E|3|1F|5|6|7|2T|8|@]|9|@]|A|$]]|$1|1G|3|1H|5|6|7|2U|8|@$S|2V|T|2W|U|V]|$S|2X|T|2Y|U|V]]|9|@]|A|$]]|$1|1I|3|1J|5|H|7|2Z|8|@]|9|@]|A|$I|J]]|$1|1K|3|1L|5|6|7|30|8|@]|9|@]|A|$]]|$1|1M|3|1N|5|H|7|31|8|@]|9|@]|A|$I|J]]|$1|1O|3|1P|5|6|7|32|8|@$S|33|T|34|U|V]]|9|@]|A|$]]|$1|1Q|3|1R|5|6|7|35|8|@$S|36|T|37|U|V]|$S|38|T|39|U|V]]|9|@]|A|$]]|$1|1S|3|1T|5|H|7|3A|8|@]|9|@]|A|$I|J]]|$1|1U|3|1V|5|6|7|3B|8|@$S|3C|T|3D|U|V]|$S|3E|T|3F|U|V]|$S|3G|T|3H|U|V]|$S|3I|T|3J|U|V]]|9|@]|A|$]]|$1|1W|3|1X|5|6|7|3K|8|@$S|3L|T|3M|U|V]|$S|3N|T|3O|U|V]|$S|3P|T|3Q|U|V]]|9|@]|A|$]]|$1|1Y|3|1Z|5|6|7|3R|8|@]|9|@]|A|$]]|$1|20|3|21|5|6|7|3S|8|@]|9|@]|A|$]]|$1|22|3|-4|5|6|7|3T|8|@]|9|@]|A|$]]]|23|$]]

<h1>tldr;</h1>
I wasn't able use any of the above answers in my use case so I used the following command to get the ip address of my Ethernet network adapter and echo it as mentioned in the above question.
In a command line:
<pre class="lang-sh prettyprint-override"><code>for /f &quot;tokens=3 delims=: &quot; %i in ('netsh interface ip show config name^=&quot;Ethernet&quot; ^| findstr &quot;IP Address&quot;') do echo Your IP Address is: %i
</code></pre>
Or in a batch file:
<pre class="lang-sh prettyprint-override"><code>for /f &quot;tokens=3 delims=: &quot; %%i in ('netsh interface ip show config name^=&quot;Wi-Fi&quot; ^| findstr &quot;IP Address&quot; ^| findstr [0-9]') do set IP=%%i
</code></pre>
<h3>For those who are curious to know what all that means, read on</h3>
Most commands using <code>ipconfig</code> for example just print out all your IP addresses and I needed a specific one which in my case was for my Ethernet network adapter.
You can see your list of network adapters by using the <code>netsh interface ipv4 show interfaces</code> command. Most people need Wi-Fi or Ethernet.
You'll see a table like so in the output to the command prompt:
<pre class="lang-sh prettyprint-override"><code>Idx Met MTU State Name
--- ---------- ---------- ------------ ---------------------------
 1 75 4294967295 connected Loopback Pseudo-Interface 1
 15 25 1500 connected Ethernet
 17 5000 1500 connected vEthernet (Default Switch)
 32 15 1500 connected vEthernet (DockerNAT)
</code></pre>
In the name column you should find the network adapter you want (i.e. Ethernet, Wi-Fi etc.).
As mentioned, I was interested in <code>Ethernet</code> in my case.
To get the IP for that adapter we can use the netsh command:
<code>netsh interface ip show config name=&quot;Ethernet&quot;</code>
This gives us this output:
<pre class="lang-sh prettyprint-override"><code>Configuration for interface &quot;Ethernet&quot;
 DHCP enabled: Yes
 IP Address: 169.252.27.59
 Subnet Prefix: 169.252.0.0/16 (mask 255.255.0.0)
 InterfaceMetric: 25
 DNS servers configured through DHCP: None
 Register with which suffix: Primary only
 WINS servers configured through DHCP: None
</code></pre>
(I faked the actual IP number above for security reasons )
I can further specify which line I want using the <code>findstr</code> command in the ms-dos command prompt.
Here I want the line containing the string <code>IP Address</code>.
<pre><code>netsh interface ip show config name=&quot;Ethernet&quot; | findstr &quot;IP Address&quot;
</code></pre>
This gives the following output:
<pre class="lang-sh prettyprint-override"><code> IP Address: 169.252.27.59
</code></pre>
I can then use the <code>for</code> command that allows me to parse files (or multiline strings in this case) and split out the strings' contents based on a delimiter and the item number that I'm interested in.
Note that I am looking for the third item (tokens=3) and that I am using the space character and <code>:</code> as my delimiters (<code>delims=: </code>).
<pre class="lang-sh prettyprint-override"><code>for /f &quot;tokens=3 delims=: &quot; %i in ('netsh interface ip show config name^=&quot;Ethernet&quot; ^| findstr &quot;IP Address&quot;') do echo Your IP Address is: %i
</code></pre>
Each value or token in the loop is printed off as the variable %i but I'm only interested in the third &quot;token&quot; or item (hence <code>tokens=3</code>). Note that I had to escape the <code>|</code> and <code>=</code> using a <code>^</code>
At the end of the <code>for</code> command you can specify a command to run with the content that is returned. In this case I am using <code>echo</code> to print it out with some other text but you could also assign the value to an environment variable with <code>do set IP=%i</code> for example or what ever you like.
Pretty neat, huh?
If you have any ideas for improving please leave a comment. I'd love to hear it :) Or you could just edit.

blocks|key|558036|text|对于我的系统，我有许多IPv4地址，其中只有一个是正确的。一种简单的排序和检查方法如下：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|558037|for+/f+"tokens=1,2*+delims=:"+%25%25A+in+('ipconfig+%5E%7C+find+"IPv4+Address"')+do+(
++++set+"tempip=%25%25~B"
++++set+"tempip=!tempip:+=!"
++++ping+!tempip!+-n+1+-w+50
++++if+!errorlevel!==0+(
++++++++set+localip=!tempip!
++++++++goto+foundlocal
++++)
)
:foundlocal|code-block|syntax|javascript|558038|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

For my system, I had numerous IPv4 Addresses, only one of which was correct. A simple way to sort out and check it is as follows:

<pre><code>for /f "tokens=1,2* delims=:" %%A in ('ipconfig ^| find "IPv4 Address"') do (
 set "tempip=%%~B"
 set "tempip=!tempip: =!"
 ping !tempip! -n 1 -w 50
 if !errorlevel!==0 (
 set localip=!tempip!
 goto foundlocal
 )
)
:foundlocal
</code></pre>

blocks|key|4252867|text|如果您想要PowerShell或WSL2+bash：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4252868|我只是在this+answer+on+superuser的基础上构建，|offset|length|4252869|但我发现以下选项可以更清晰地获取我的LAN+IP地址：|4252870|4252871|查找要了解的接口的名称|ordered-list-item|4252872|4252873|对我来说，是Configuration+for+interface+"Wi-Fi"|style|CODE|4252874|所以对我来说，它的名字是Wi-Fi。|4252875|(将下面命令中的"Wi-Fi"替换为您的接口名称)|4252876|4252877|PowerShell：|4252878|4252879|$myip+=+netsh接口ip显示地址"Wi-Fi“%7C+where+{+$\_+-match+"IP+Address"}+%7C+%25{+$_+-replace+"%5E.*IP地址：\W*”，""}+echo+$myip|4252880|输出：192.168.1.10|4252881|4252882|或者，在WSL2中执行命令：|4252883|4252884|netsh.exe接口ip显示地址"Wi-Fi“\%7C+grep+'IP地址‘\%7C+sed+-r+'s/%5E.*IP地址：\W*//’#例如导出REACT_NATIVE_PACKAGER_HOSTNAME=$(netsh.exe接口ip显示地址"Wi-Fi”\%7C+grep+'IP地址‘\%7C+sed+-r+'s/%5E.*IP+Address:\W*//')|4252885|entityMap|0|LINK|mutability|MUTABLE|url|https://superuser.com/a/719274/93731^0|0|4|O|0|0|0|0|0|0|6|Z|0|C|5|0|8|7|0|0|0|0|S|Y|0|3|C|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|1G|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|1H|8|@]|9|@$D|1I|E|1J|1|1K]]|A|$]]|$1|F|3|G|5|6|7|1L|8|@]|9|@]|A|$]]|$1|H|3|-4|5|6|7|1M|8|@]|9|@]|A|$]]|$1|I|3|J|5|K|7|1N|8|@]|9|@]|A|$]]|$1|L|3|-4|5|6|7|1O|8|@]|9|@]|A|$]]|$1|M|3|N|5|6|7|1P|8|@$D|1Q|E|1R|O|P]]|9|@]|A|$]]|$1|Q|3|R|5|6|7|1S|8|@$D|1T|E|1U|O|P]]|9|@]|A|$]]|$1|S|3|T|5|6|7|1V|8|@$D|1W|E|1X|O|P]]|9|@]|A|$]]|$1|U|3|-4|5|6|7|1Y|8|@]|9|@]|A|$]]|$1|V|3|W|5|K|7|1Z|8|@]|9|@]|A|$]]|$1|X|3|-4|5|6|7|20|8|@]|9|@]|A|$]]|$1|Y|3|Z|5|6|7|21|8|@$D|22|E|23|O|P]]|9|@]|A|$]]|$1|10|3|11|5|6|7|24|8|@$D|25|E|26|O|P]]|9|@]|A|$]]|$1|12|3|-4|5|6|7|27|8|@]|9|@]|A|$]]|$1|13|3|14|5|K|7|28|8|@]|9|@]|A|$]]|$1|15|3|-4|5|6|7|29|8|@]|9|@]|A|$]]|$1|16|3|17|5|6|7|2A|8|@]|9|@]|A|$]]|$1|18|3|-4|5|6|7|2B|8|@]|9|@]|A|$]]]|19|$1A|$5|1B|1C|1D|A|$1E|1F]]]]

If you want PowerShell or WSL2 bash:
I'm just building off of <a href="https://superuser.com/a/719274/93731">this answer on superuser</a>, 
but I found the following options much clearer way to get my LAN IP address:
<ol>
<li>Find the name of the interface you want to know about 
For me, it was <code>Configuration for interface &quot;Wi-Fi&quot;</code>, 
so for me the name is <code>Wi-Fi</code>. 
(Replace <code>&quot;Wi-Fi&quot;</code> in the command below with your interface name)
</li>
<li>PowerShell:
<pre><code>$myip = netsh interface ip show address &quot;Wi-Fi&quot; `
 | where { $_ -match &quot;IP Address&quot;} `
 | %{ $_ -replace &quot;^.*IP Address:\W*&quot;, &quot;&quot;}

echo $myip
</code></pre>
Output: <code>192.168.1.10</code>
</li>
<li>Or, my edge case, executing command in WSL2:
<pre class="lang-sh prettyprint-override"><code>netsh.exe interface ip show address &quot;Wi-Fi&quot; \
 | grep 'IP Address' \
 | sed -r 's/^.*IP Address:\W*//'

# e.g.
export REACT_NATIVE_PACKAGER_HOSTNAME=$(netsh.exe interface ip show address &quot;Wi-Fi&quot; \
 | grep 'IP Address' \
 | sed -r 's/^.*IP Address:\W*//')
</code></pre>
</li>
</ol>

I have an odd question, not sure if its possible.

I'd like to write a script, and for example I'm going to use ipconfig as my command.

Now when you normally run this command theres a ton of output.

What I'd like to have is a script that would show only the IP address, for example.

<pre><code>echo Network Connection Test
ipconfig &lt;---This would run in the background
echo Your IP Address is: (INSERT IP ADDRESS HERE)
</code></pre>

The output would be

<pre><code>Network Connection Test

Your IP Address is: 192.168.1.1
</code></pre>

Is this even possible?

How do I get the IP address into a batch-file variable?

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

我有一个奇怪的问题，不确定是否可能。我想写一个脚本，例如，我将使用ipconfig作为我的命令。现在，当你正常运行这个命令时，会有大量的输出。我想要的是一个脚本，将只显示IP地址，例如。echo Network Connection Testipconfig <---This would run in the back...

问如何将IP地址放入批处理文件变量？
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何将IP地址放入批处理文件变量？EN