blocks|key|106246|text|我已经找到了我的问题的解决方案：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|106247|OVF模板步骤1:在连接到OVF时，从vSphere客户端中选择虚拟机，然后从“|106248|”菜单中选择“"Export"->"Export+vCenter1+|unordered-list-item|offset|length|style|BOLD|106249|”(注意:确保虚拟机已关闭，否则此功能不可用-它将显示为灰色)。此操作将允许您在计算机/笔记本电脑上保存VM+(作为.vmdk、.ovf和.mf文件)。|106250|第2步:使用vSphere客户端连接到OVF，从“+vCenter2+”菜单中选择"Deploy+OVF+Template...“，然后选择上一步中保存虚拟机的位置。|106251|106252|这就是全部！|106253|谢谢!|106254|entityMap^0|0|0|8|6|I|G|0|0|P|A|16|M|0|0|0|0^^$0|@$1|2|3|4|5|6|7|V|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|W|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|X|8|@$G|Y|H|Z|I|J]|$G|10|H|11|I|J]]|9|@]|A|$]]|$1|K|3|L|5|F|7|12|8|@]|9|@]|A|$]]|$1|M|3|N|5|F|7|13|8|@$G|14|H|15|I|J]|$G|16|H|17|I|J]]|9|@]|A|$]]|$1|O|3|-4|5|6|7|18|8|@]|9|@]|A|$]]|$1|P|3|Q|5|6|7|19|8|@]|9|@]|A|$]]|$1|R|3|S|5|6|7|1A|8|@]|9|@]|A|$]]|$1|T|3|-4|5|6|7|1B|8|@]|9|@]|A|$]]]|U|$]]

I've figure it out the solution to my problem: 

<ul>
<li>Step 1: from within the vSphere client, while connected to vCenter1, select the VM and then from "File" menu select "Export"->"Export OVF Template" (Note: make sure the VM is Powered Off otherwise this feature is not available - it will be gray). This action will allow you to save on your machine/laptop the VM (as an .vmdk, .ovf and a .mf file). </li>
<li>Step 2: Connect to the vCenter2 with your vSphere client and from "File" menu select "Deploy OVF Template..." and then select the location where the VM was saved in the previous step.</li>
</ul>

That was all! 
Thanks!

blocks|key|3647606|text|是的，你可以做到。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3647607|3647608|从其目录中拷贝所有克隆虚拟机的文件，并将其放在其目标数据存储区中。|ordered-list-item|3647609|在连接到目标vCenter的VI客户端中，转至Inventory->datastore视图。|3647610|打开您放置虚拟机文件的数据存储区的数据存储区浏览器。|3647611|找到您复制的.vmx文件并右键单击该文件。|3647612|选择“注册虚拟机”，然后按照随后出现的任何提示进行操作。(根据您的vCenter版本，这可能是“添加到库存”或其他变体)|3647613|3647614|虚拟机注册过程应该完成，克隆的虚拟机在新的vCenter中可用！|3647615|祝好运!|3647616|entityMap^0|0|0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|V|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|W|8|@]|9|@]|A|$]]|$1|F|3|G|5|E|7|X|8|@]|9|@]|A|$]]|$1|H|3|I|5|E|7|Y|8|@]|9|@]|A|$]]|$1|J|3|K|5|E|7|Z|8|@]|9|@]|A|$]]|$1|L|3|M|5|E|7|10|8|@]|9|@]|A|$]]|$1|N|3|-4|5|6|7|11|8|@]|9|@]|A|$]]|$1|O|3|P|5|6|7|12|8|@]|9|@]|A|$]]|$1|Q|3|R|5|6|7|13|8|@]|9|@]|A|$]]|$1|S|3|-4|5|6|7|14|8|@]|9|@]|A|$]]]|T|$]]

Yes, you can do this. 

<ol>
<li>Copy all of the cloned VM's files from its directory, and place it on its destination datastore.</li>
<li>In the VI client connected to the destination vCenter, go to the Inventory->Datastores view. </li>
<li>Open the datastore browser for the datastore where you placed the VM's files.</li>
<li>Find the .vmx file that you copied over and right-click it.</li>
<li>Choose 'Register Virtual Machine', and follow whatever prompts ensue. (Depending on your version of vCenter, this may be 'Add to Inventory' or some other variant)</li>
</ol>

The VM registration process should finish with the cloned VM usable in the new vCenter!

Good luck!

blocks|key|106108|text|要移动虚拟机，您无需克隆VM，只需将VM文件(在VM断电后)复制到外部HDD并在目标主机上注册。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|106109|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

For moving a virtual machine you need not clone the VM, just copy the VM files (after powering the VM off) to external HDD and register the same on destination host.

blocks|key|106155|text|一种简单得多的方法是使用vCenter转换器独立客户端并执行P2V，但在本例中是V2V。这比将整个VM文件复制到某个位置并将其复制到您的新vCenter上要快得多。将其复制或导出到OVF模板，然后再将其导入，需要很长时间。您可以在一步中将vCenter转换器独立客户端设置为V2V，然后进行同步，然后在新的vCenter上启动虚拟机并在旧的Vcenter上关闭。很简单。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|106156|对于我来说，使用这种方法，我能够在大约30分钟内将VM从一个vCenter移动到另一个vCenter，而复制或导出则需要2小时以上。您的结果可能有所不同。|106157|106158|如果您可以将该数据存储区呈现给vCenter上的ESXi服务器，然后按照步骤2进行操作，则下面来自另一个响应者的此过程会工作得更好。您不必拷贝所有虚拟机，然后再执行该过程的其余部分。|106159|106160|从其目录中拷贝所有克隆虚拟机的文件，并将其放在其目标数据存储区中。|ordered-list-item|106161|在连接到目标vCenter的VI客户端中，转至Inventory->datastore视图。|106162|打开您放置虚拟机文件的数据存储区的数据存储区浏览器。|106163|找到您复制的.vmx文件并右键单击该文件。|106164|选择“注册虚拟机”，然后按照随后出现的任何提示进行操作。(根据您的vCenter版本，这可能是“添加到库存”或其他变体)|106165|106166|entityMap^0|0|0|0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|V|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|W|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|X|8|@]|9|@]|A|$]]|$1|E|3|F|5|6|7|Y|8|@]|9|@]|A|$]]|$1|G|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]|$1|H|3|I|5|J|7|10|8|@]|9|@]|A|$]]|$1|K|3|L|5|J|7|11|8|@]|9|@]|A|$]]|$1|M|3|N|5|J|7|12|8|@]|9|@]|A|$]]|$1|O|3|P|5|J|7|13|8|@]|9|@]|A|$]]|$1|Q|3|R|5|J|7|14|8|@]|9|@]|A|$]]|$1|S|3|-4|5|6|7|15|8|@]|9|@]|A|$]]|$1|T|3|-4|5|6|7|16|8|@]|9|@]|A|$]]]|U|$]]

A much simpler way to do this is to use vCenter Converter Standalone Client and do a P2V but in this case a V2V. It is much faster than copying the entire VM files onto some storage somewhere and copy it onto your new vCenter. It takes a long time to copy or exporting it to an OVF template and then import it. You can set your vCenter Converter Standalone Client to V2V in one step and synchronize and then have it power up the VM on the new Vcenter and shut off on the old vCenter. Simple. 

For me using this method I was able to move a VM from one vCenter to another vCenter in about 30 minutes as compared to copying or exporting which took over 2hrs. Your results may vary.

<hr>

This process below, from another responder, would work even better if you can present that datastore to ESXi servers on the vCenter and then follow step 2. Eliminating having to copy all the VMs then follow rest of the process.

<ol>
<li>Copy all of the cloned VM's files from its directory, and place it on its destination datastore.</li>
<li>In the VI client connected to the destination vCenter, go to the Inventory->Datastores view. </li>
<li>Open the datastore browser for the datastore where you placed the VM's files.</li>
<li>Find the .vmx file that you copied over and right-click it.</li>
<li>Choose 'Register Virtual Machine', and follow whatever prompts ensue. (Depending on your version of vCenter, this may be 'Add to Inventory' or some other variant)</li>
</ol>

blocks|key|3362613|text|将VM文件复制到外部HDD上，然后将其带到目标位置将需要更长的时间，并且需要多个步骤。使用vCenter转换器独立客户端将为您做所有的事情，而且速度快得多。不需要外置硬盘。不知道你从哪里弄到的克隆部分。vCenter转换器独立客户端只需通过从源导入和导出到目标来复制虚拟机文件，关闭源虚拟机，然后在目标上注册虚拟机并开机。只需一步即可完成。设置vCenter转换器独立客户端大约需要1分钟。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3362614|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Copying the VM files onto an external HDD and then bringing it in to the destination will take a lot longer and requires multiple steps. Using vCenter Converter Standalone Client will do everything for you and is much faster. No external HDD required. Not sure where you got the cloning part from. vCenter Converter Standalone Client is simply copying the VM files by importing and exporting from source to destination, shutdown the source VM, then register the VM at destination and power on. All in one step. Takes about 1 min to set that up vCenter Converter Standalone Client.

blocks|key|106213|text|您根本不需要导出VM。您可以将虚拟机移动并克隆到vCenter+1中的出租车主机。然后将该主机添加到vCenter+2，并将任何虚拟机vMotion到以前由vCenter+2管理的其他主机。完成后，您可以将出租车主机添加回vCenter+1。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|106214|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

You don't have to export your VMs at all. You can move the VM and clone to a TAXI host in vCenter 1. Then add the host to vCenter 2, and vMotion away whatever VMs to other hosts previously managed by vCenter 2. When done, you can add the TAXI host back to vCenter 1.

blocks|key|1748208|text|如果您希望使用命令行执行此操作，则可以在if+you+have+ESXi+6.0+(or+possibly+even+ESXi+5.5)运行时使用govc执行此操作，这是一个非常有用的实用工具，可用于与vCenter及其相关资源进行交互。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1748209|根据您的设置，您可以|1748210|#+setup+your+credentials
export+GOVC_USERNAME=YOUR_USERNAME+GOVC_PASSWORD=YOUR_PASSWORD
govc+export.ovf+-u+your-vcsa-url.example.com+-vm+VM_NAME+-dc+VMS_DATACENTER+export-folder|code-block|syntax|javascript|1748211|然后，您将在文件夹export-folder中导出VM+VM_NAME。从那里，您可以|1748212|govc+import.ovf+-u+your-other-vcsa-url.example.com+-vm+NEW_VM_NAME+-dc+NEW_DATACENTER+export-folder/VM_NAME.ovf|1748213|这将把它导入到你的另一个vCenter中。如果您有多个可用的数据存储，则可能还必须指定-ds+NEW_DATASTORE，但如果需要，govc会告诉您。|1748214|您应该使用上面的require+that+govc+is+installed命令，因为无论哪种方式，它都比ovftool好得多。|1748215|entityMap|0|LINK|mutability|MUTABLE|url|https://github.com/vmware/govmomi#compatibility|1|https://github.com/vmware/govmomi/tree/master/govc^0|21|4|K|1C|0|0|0|0|9|D|S|7|0|0|17|H|1V|4|0|L|4|1H|7|8|U|1|0^^$0|@$1|2|3|4|5|6|7|14|8|@$9|15|A|16|B|C]]|D|@$9|17|A|18|1|19]]|E|$]]|$1|F|3|G|5|6|7|1A|8|@]|D|@]|E|$]]|$1|H|3|I|5|J|7|1B|8|@]|D|@]|E|$K|L]]|$1|M|3|N|5|6|7|1C|8|@$9|1D|A|1E|B|C]|$9|1F|A|1G|B|C]]|D|@]|E|$]]|$1|O|3|P|5|J|7|1H|8|@]|D|@]|E|$K|L]]|$1|Q|3|R|5|6|7|1I|8|@$9|1J|A|1K|B|C]|$9|1L|A|1M|B|C]]|D|@]|E|$]]|$1|S|3|T|5|6|7|1N|8|@$9|1O|A|1P|B|C]|$9|1Q|A|1R|B|C]]|D|@$9|1S|A|1T|1|1U]]|E|$]]|$1|U|3|-4|5|6|7|1V|8|@]|D|@]|E|$]]]|V|$W|$5|X|Y|Z|E|$10|11]]|12|$5|X|Y|Z|E|$10|13]]]]

If you'd like to do this using the command line, you can do this <a href="https://github.com/vmware/govmomi#compatibility" rel="nofollow noreferrer">if you have ESXi 6.0 (or possibly even ESXi 5.5)</a> running, by using <code>govc</code>, which is a very helpful utility for interacting with both your vCenter and its associated resources.

Depending on your setup, you can 

<pre><code># setup your credentials
export GOVC_USERNAME=YOUR_USERNAME GOVC_PASSWORD=YOUR_PASSWORD
govc export.ovf -u your-vcsa-url.example.com -vm VM_NAME -dc VMS_DATACENTER export-folder
</code></pre>

Then, you'll have your VM <code>VM_NAME</code> exported in the folder <code>export-folder</code>. From there, you can then 

<pre><code>govc import.ovf -u your-other-vcsa-url.example.com -vm NEW_VM_NAME -dc NEW_DATACENTER export-folder/VM_NAME.ovf
</code></pre>

That'll import it into your other vCenter. You might have to specify <code>-ds NEW_DATASTORE</code> too, if you have more than one datastore available, but <code>govc</code> will tell you so if you need to.

The commands above <a href="https://github.com/vmware/govmomi/tree/master/govc" rel="nofollow noreferrer">require that <code>govc</code> is installed</a>, which you should, because it's far better than <code>ovftool</code> either way.

I have the following problem: 
There two separate vCenters (ESXi). They cannot see each other or communicate in any way.
I can create a Clone of a VM in vCenter1 but then I want to move that Clone in vCenter2.
 Is there a way that I can copy the Cloned VM (files) on an external HDD and move them in the other vCenter?

move a virtual machine from one vCenter to another vCenter

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

我有以下问题:有两个独立的vCenters (ESXi)。他们不能以任何方式见面或交流。我可以在vCenter1中创建虚拟机的克隆，但随后我想在vCenter2中移动该克隆。有没有一种方法可以将克隆的虚拟机(文件)复制到外部硬盘上，并将它们移动到其他vCenter中？

问将虚拟机从一个vCenter移动到另一个vCenter
EN

回答 7

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问将虚拟机从一个vCenter移动到另一个vCenterEN

回答 7

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问将虚拟机从一个vCenter移动到另一个vCenter
EN