blocks|key|1483980|text|Currently+not.|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|1483981|我认为不管怎样，用代码来组织你的代码是更好的。正如在C#中发现的那样，区域是正确结构和保持可维护性的一个糟糕的替代品。|1483982|entityMap|0|LINK|mutability|MUTABLE|url|https://bugreports.qt-project.org/browse/QTCREATORBUG-5170^0|0|E|0|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@$A|O|B|P|1|Q]]|C|$]]|$1|D|3|E|5|6|7|R|8|@]|9|@]|C|$]]|$1|F|3|-4|5|6|7|S|8|@]|9|@]|C|$]]]|G|$H|$5|I|J|K|C|$L|M]]]]

<a href="https://bugreports.qt-project.org/browse/QTCREATORBUG-5170" rel="noreferrer">Currently not.</a>

I think it is better to structure your code by using code anyways. The regions as also found in C# are imho a bad substitute for proper structuring and keeping things maintainable.

blocks|key|3208955|text|我认为你可以这样做：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3208956|重新格式化您的someclass.cpp|3208957|namespace+ns
{
++CClass::CClass()+{}
++CClass::~CClass()+{}
++void+CClass::Test()+{}
++void+CClass::Test2()+{}
++void+CClass::Test3()+{}
}|code-block|syntax|javascript|3208958|例如，作为|3208959|namespace+ns+//+construction-destruction
{
++CClass::CClass()+{}
++CClass::~CClass()+{}
}
namespace+ns+//+test-region
{
++void+CClass::Test()+{}
++void+CClass::Test2()+{}
++void+CClass::Test3()+{}
}|3208960|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|P|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|Q|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|R|8|@]|9|@]|A|$]]|$1|K|3|L|5|F|7|S|8|@]|9|@]|A|$G|H]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

I think you can do this:

Reformat your someclass.cpp

<pre><code>namespace ns
{
 CClass::CClass() {}
 CClass::~CClass() {}
 void CClass::Test() {}
 void CClass::Test2() {}
 void CClass::Test3() {}
}
</code></pre>

for example as

<pre><code>namespace ns // construction-destruction
{
 CClass::CClass() {}
 CClass::~CClass() {}
}
namespace ns // test-region
{
 void CClass::Test() {}
 void CClass::Test2() {}
 void CClass::Test3() {}
}
</code></pre>

blocks|key|1484035|text|您可以将代码放在{}中，并为其名称编写注释。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1484036|{+//+RegionName+
++++void+Test()+{}
++++void+Test2()+{}
++++void+Test3()+{}
}|code-block|syntax|javascript|1484037|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

you can place your code in {} and write a comment for its name.

<pre><code>{ // RegionName 
 void Test() {}
 void Test2() {}
 void Test3() {}
}
</code></pre>

blocks|key|1794562|text|您可以将代码放在{}中，并为其名称编写注释。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1794563|这将抛出"EXPECTED+UN-QUALIFIED+ID"错误。|offset|length|style|CODE|1794564|entityMap^0|0|4|Q|0^^$0|@$1|2|3|4|5|6|7|J|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|K|8|@$D|L|E|M|F|G]]|9|@]|A|$]]|$1|H|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|I|$]]

you can place your code in {} and write a comment for its name.

This WILL THROW <code>"EXPECTED UN-QUALIFIED ID"</code> error.

blocks|key|3121124|text|现在，我们可以通过以下方式完成此操作：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3121125|在要折叠的块之前，放置以下定义：|3121126|#define+FOLDINGSTART+{|code-block|syntax|javascript|3121127|紧跟在你放置的块后面：|3121128|#define+FOLDINGEND+}|3121129|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|P|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|Q|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|R|8|@]|9|@]|A|$]]|$1|K|3|L|5|F|7|S|8|@]|9|@]|A|$G|H]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

Now we can do this by:

Right before the block that you want to fold you place the following define:

<pre><code>#define FOLDINGSTART {
</code></pre>

and directly after the block you place:

<pre><code>#define FOLDINGEND }
</code></pre>

blocks|key|3209140|text|我知道这有点老了，但是当我自己在寻找这个问题的解决方案时，它就出现了，所以……|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3209141|@ATatum_BlurPD在Qt+Creator+C%2B%2B+folding+region中说|offset|length|3209142|3209143|我知道这是旧的，但是这是我在QT+Creator+4.13.3中的工作。|blockquote|3209144|3209145|3209146|3209147|确保对|unordered-list-item|3209148|'Tools‘->+'Options’->‘文本编辑器’->+'Display‘Display’启用了‘显示折叠标记|3209149|3209150|3209151|在要添加区域的'.cpp‘或'.h’文件中添加区域：|3209152|在end|3209153|中添加‘#|3209154|+RegionNameHere{’|3209155|注意'{‘|3209156|3209157|3209158|-+Add+'#pragma+endregion+}'+
++++-+Note+the+'}'+at+the+end|code-block|syntax|javascript|3209159|一些示例代码：|3209160|#杂注区域计时器:过滤器更改延迟{+void+CLog_EntryList::init_Timer_FilterChangeDelay()+{+m_timerFilterChangeDelay.setInterval(5000)；m_timerFilterChangeDelay.setSingleShot(true)；connect(&m_timerFilterChangeDelay，&QTimer::timeout，this，&CLog_EntryList::slot_Timer_FilterChangeDelay_Timedout)；}+void+CLog_EntryList::slot_Timer_FilterChangeDelay_Start()+{+if(m_timerFilterChangeDelay.isActive())+return；m_timerFilterChangeDelay.setInterval(5000)；m_timerFilterChangeDelay.setSingleShot(真)；m_timerFilterChangeDelay.start()；}+void+CLog_EntryList::slot_Timer_FilterChangeDelay_Timedout()+{}#杂注endregion}|3209161|我在这里没有足够的名气来发布图片证明，但你可以在here上看到它们|3209162|entityMap|0|LINK|mutability|MUTABLE|url|/post/643395|1|https://forum.qt.io/topic/112181/qt-creator-c-folding-region/15^0|0|F|T|0|0|0|0|0|0|0|1|1|0|0|0|0|0|1|1|0|0|0|0|0|O|4|1|0^^$0|@$1|2|3|4|5|6|7|1Q|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|1R|8|@]|9|@$D|1S|E|1T|1|1U]]|A|$]]|$1|F|3|-4|5|6|7|1V|8|@]|9|@]|A|$]]|$1|G|3|H|5|I|7|1W|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|1X|8|@]|9|@]|A|$]]|$1|K|3|-4|5|6|7|1Y|8|@]|9|@]|A|$]]|$1|L|3|-4|5|6|7|1Z|8|@]|9|@]|A|$]]|$1|M|3|N|5|O|7|20|8|@]|9|@]|A|$]]|$1|P|3|Q|5|O|7|21|8|@]|9|@]|A|$]]|$1|R|3|-4|5|6|7|22|8|@]|9|@]|A|$]]|$1|S|3|-4|5|6|7|23|8|@]|9|@]|A|$]]|$1|T|3|U|5|6|7|24|8|@]|9|@]|A|$]]|$1|V|3|W|5|O|7|25|8|@]|9|@]|A|$]]|$1|X|3|Y|5|6|7|26|8|@]|9|@]|A|$]]|$1|Z|3|10|5|O|7|27|8|@]|9|@]|A|$]]|$1|11|3|12|5|O|7|28|8|@]|9|@]|A|$]]|$1|13|3|-4|5|6|7|29|8|@]|9|@]|A|$]]|$1|14|3|-4|5|6|7|2A|8|@]|9|@]|A|$]]|$1|15|3|16|5|17|7|2B|8|@]|9|@]|A|$18|19]]|$1|1A|3|1B|5|6|7|2C|8|@]|9|@]|A|$]]|$1|1C|3|1D|5|6|7|2D|8|@]|9|@]|A|$]]|$1|1E|3|1F|5|6|7|2E|8|@]|9|@$D|2F|E|2G|1|2H]]|A|$]]|$1|1G|3|-4|5|6|7|2I|8|@]|9|@]|A|$]]]|1H|$1I|$5|1J|1K|1L|A|$1M|1N]]|1O|$5|1J|1K|1L|A|$1M|1P]]]]

This is a bit old, I know, but it showed up when I myself was searching for a resolution to this problem so...
@ATatum_BlurPD said in <a href="/post/643395">Qt Creator C++ folding region</a>:
<blockquote>
I know this is old, but here is what works for me in QT Creator 4.13.3.
<ul>
<li>Make sure 'Display Folding markers' is enabled
<ul>
<li>'Tools' -&gt; 'Options' -&gt; 'Text Editor' -&gt; 'Display' tab</li>
</ul>
</li>
<li>In the '.cpp' or '.h' file you want to add the region to:
<ul>
<li>Add '#pragma region RegionNameHere{'
<ul>
<li>Note the '{' at the end</li>
</ul>
</li>
<li>Add '#pragma endregion }'
<ul>
<li>Note the '}' at the end</li>
</ul>
</li>
</ul>
</li>
</ul>
<h3>Some sample code:</h3>
<pre><code>#pragma region TIMER:Filter Change Delay {

void CLog_EntryList::init_Timer_FilterChangeDelay()
{
 m_timerFilterChangeDelay.setInterval(5000);
 m_timerFilterChangeDelay.setSingleShot(true);
 connect(&amp;m_timerFilterChangeDelay, &amp;QTimer::timeout, this, &amp;CLog_EntryList::slot_Timer_FilterChangeDelay_Timedout);
}

void CLog_EntryList::slot_Timer_FilterChangeDelay_Start()
{
 if(m_timerFilterChangeDelay.isActive())
 return;
 
 m_timerFilterChangeDelay.setInterval(5000);
 m_timerFilterChangeDelay.setSingleShot(true);
 m_timerFilterChangeDelay.start();
}

void CLog_EntryList::slot_Timer_FilterChangeDelay_Timedout()
{
 
}
#pragma endregion}

</code></pre>
</blockquote>
I don't have enough reputation here to post image-proof, but you can see them <a href="https://forum.qt.io/topic/112181/qt-creator-c-folding-region/15" rel="nofollow noreferrer">here</a>

Is there something similar to explicit code regions for folding in Qt Creator:

<pre><code>#pragma region Region_1
void Test() {}
void Test2() {}
void Test3() {}
#pragma endregion Region_1
</code></pre>

I can see <a href="http://www.freeimagehosting.net/9a5a7" rel="noreferrer">folding for logical</a> code blocks, but do not know how to explicitly set such a block. My version of Qt Creator is 2.4.1

Code folding (#pragma region) in Qt creator

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

Qt Creator中是否有类似于折叠的显式代码区域：#pragma region Region_1void Test() {}void Test2() {}void Test3() {}#pragma endregion Region_1我可以看到代码块，但不知道如何显式设置这样的块。我的Qt Creator版本是2...

问Qt creator中的代码折叠(#杂注区域)
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Qt creator中的代码折叠(#杂注区域)EN