blocks|key|422370|text|如果你可以从你的WSL直接SSH到你的大学系统，我假设你可以直接从你的Windows系统SSH。在这种情况下，您可以从Windows设置VS+Code+Remote+SSH来直接访问您的大学系统。鉴于此，我使用了Git+Bash终端，因为它直接支持从Windows操作系统发出的所有Linux命令。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|422371|SSHStep1SSH:设置您对大学系统的访问权限(无论是否使用密码)。你可以在网上参考文章，我假设你已经知道怎么做了，因为你是在WSL中做的。|422372|Step2：在本地机器上安装VS代码扩展中的远程开发包。|offset|length|style|BOLD|422373|第3步：转到VS代码设置，展开扩展下拉菜单并选择'Remote+-+SSH‘。在设置页面上，将"Remote+-+SSH:+Config+File“设置为存储远程系统详细信息的ssh配置文件。例如：~\vscode.ssh还选中了“总是显示SSH终端”的复选框。|422374|步骤4：将远程系统详细信息添加到文件~\vscode.ssh中，如下所示：|422375|Host+<hostname>
++++User+<ID+for+SSH+login>+#+e.g.+your+university+ID
++++HostName+<full+qualified+address+for+your+remote+system>+#+e.g.+system.subnet.university.edu
++++IdentityFile+<your+SSH+pvt+key>+#e.g.+~/.ssh/id_rsa|code-block|syntax|javascript|422376|Step+5：在左侧导航栏中选择Remote+Explorer，然后从下拉菜单中选择“+Targets”。您的主机名应显示在此处。右键单击并连接到主机。|422377|Step+6：如果提取tar文件失败，请从VSCode终端日志中仔细查看第一次连接尝试的日志。|422378|默认情况下，VS+Code会将vscode-server安装在您的远程系统的主目录中，根据您的大学的空间限制，该目录可能会用完空间。您需要将vscode-server目录移动到空间限制较少的工作区，通常是项目区。使用以下步骤来完成此操作，我创建了这些步骤以供我的组织使用：|422379|启动VSCode+remote后，根据远程主目录中的可用空间，连接可能会失败或成功，因为默认情况下，VSCode会在主目录中设置远程服务器，并且此设置不能更改。|422380|服务器如果成功，仍将vscode-|422381|移至另一个较大的可用空间目录：|ordered-list-item|422382|422383|a.从远程桌面终端b.+mv+~/.vscode-server+/your/big/disk/+project+/space+c导航到所需的项目空间目录。ln+-s+/your/big/disk/project/+space+/.vscode-server+~/.vscode-server+d.在前面的命令中使用完全绝对路径，避免循环链接。用下面的命令确认，它不会返回任何东西。$+find+-L。/+-mindepth+15+e.再次从VSCode重新连接|422384|如果失败，请在远程大可用空间目录上手动设置vscode-|unordered-list-item|422385|
|422386|：|422387|422388|a.使用以下命令获取远程服务器上的vscode-server提交ID。类似于'e2d4cc38bb5da82wb67q86fd50f84h67bb340987‘$+ls+~/.vscode-+$COMMIT_ID+/bin+b.将tarball替换为本地系统上上一步中的提交号：https://update.code.visualstudio.com/commit:$COMMIT_ID/server-linux-x64/stable+c.将tarball从本地系统移至远程服务器磁盘：$+scp+-P+22+vscode-$COMMIT_ID-linux-x64.tar.gz+remoteID.remote.system.url.com:~/+d.将tarball移至大可用空间目录，如下所示：$+mkdir+-p+tar.url.com/$COMMIT_ID/+$mv~/+vscode-server-linux-x64.tar.gz+/your/big/disk/project/space/.vscode-server/bin/$COMMIT_ID/+e.解压缩此目录下的tarball+$+cd+/your/big/disk/project/space/.vscode-server/bin/$COMMIT_ID+$+tar+-xvzf+vscode-server-linux-x64.tar.gz-xvzf--/your/big/disk/project/space/.vscode-server/bin/$COMMIT_ID/1+f.在主目录下创建.vscode-server的符号链接$+ln+-s+/您的/big/disk/project/space/.vscode-server+~/.vscode-server+g.再次连接|422389|entityMap|0|LINK|mutability|MUTABLE|url|https://update.code.visualstudio.com/commit:$COMMIT/_ID/server-linux-x64/stable^0|0|0|0|5|0|0|3|0|0|3|0|0|17|X|0|0|1B|0|0|3S|0|0|28|0|0|H|0|0|F|0|0|0|6E|0|0|S|0|0|0|1|0|0|0|LI|3V|26|0|0^^$0|@$1|2|3|4|5|6|7|1Q|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|1R|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|1S|8|@$F|1T|G|1U|H|I]]|9|@]|A|$]]|$1|J|3|K|5|6|7|1V|8|@$F|1W|G|1X|H|I]]|9|@]|A|$]]|$1|L|3|M|5|6|7|1Y|8|@$F|1Z|G|20|H|I]]|9|@]|A|$]]|$1|N|3|O|5|P|7|21|8|@]|9|@]|A|$Q|R]]|$1|S|3|T|5|6|7|22|8|@$F|23|G|24|H|I]]|9|@]|A|$]]|$1|U|3|V|5|6|7|25|8|@$F|26|G|27|H|I]]|9|@]|A|$]]|$1|W|3|X|5|6|7|28|8|@$F|29|G|2A|H|I]]|9|@]|A|$]]|$1|Y|3|Z|5|6|7|2B|8|@$F|2C|G|2D|H|I]]|9|@]|A|$]]|$1|10|3|11|5|6|7|2E|8|@$F|2F|G|2G|H|I]]|9|@]|A|$]]|$1|12|3|13|5|14|7|2H|8|@$F|2I|G|2J|H|I]]|9|@]|A|$]]|$1|15|3|-4|5|6|7|2K|8|@]|9|@]|A|$]]|$1|16|3|17|5|6|7|2L|8|@$F|2M|G|2N|H|I]]|9|@]|A|$]]|$1|18|3|19|5|1A|7|2O|8|@$F|2P|G|2Q|H|I]]|9|@]|A|$]]|$1|1B|3|1C|5|6|7|2R|8|@]|9|@]|A|$]]|$1|1D|3|1E|5|1A|7|2S|8|@$F|2T|G|2U|H|I]]|9|@]|A|$]]|$1|1F|3|-4|5|6|7|2V|8|@]|9|@]|A|$]]|$1|1G|3|1H|5|6|7|2W|8|@$F|2X|G|2Y|H|I]]|9|@$F|2Z|G|30|1|31]]|A|$]]|$1|1I|3|-4|5|6|7|32|8|@]|9|@]|A|$]]]|1J|$1K|$5|1L|1M|1N|A|$1O|1P]]]]

If you can SSH into your university system from your WSL, I assume you can directly SSH from you Windows system. In that case, you can setup VS Code Remote SSH from Windows to directly access your university systems. Given that, I used a Git Bash terminal, as it supports all Linux commands right from your Windows OS.

Step 1: Setup your SSH access (password-less or not) to your university's systems. You can refer articles online, I assume you already know how to do that since you did it from within WSL.

Step2: Install the remote development package in VS Code extensions in local machine.

Step 3: Go to VS Code Settings and expand the Extensions drop down and select 'Remote - SSH'. On the settings page, set the "Remote - SSH: Config File" to the an ssh config file where you will store remote system details. E.g.: ~\vscode.ssh
Also select the checkbox for ‘Always Reveal the SSH terminal’.

Step 4: Add the remote system details to the file ~\vscode.ssh like:

<pre><code>Host &lt;hostname&gt;
 User &lt;ID for SSH login&gt; # e.g. your university ID
 HostName &lt;full qualified address for your remote system&gt; # e.g. system.subnet.university.edu
 IdentityFile &lt;your SSH pvt key&gt; #e.g. ~/.ssh/id_rsa
</code></pre>

Step 5: Select Remote Explorer on left navigation bar and "SSH Targets" from the dropdown. Your hostname should appear here. Right click and connect to Host.

Step 6: Carefully watch the logs of your first connection attempt from VSCode terminal logs if there are any failures to extract tar files.

By default, VS Code installs the vscode-server in your remote system's home directory, which may run out of space based on your university's space restrictions. You need to move your vscode-server directory to a work area where there's less space restrictions, usually a project area. Use below steps to do this, I created these for my organisation's use:

Once you start VSCode remote, the connection may fail or succeed based on the free space in your remote home directory as by default, VSCode setups your remote server in home directory, and this cannot be changed.

<ol>
<li>If success, still move vscode-server to another large free space directory:

<pre><code>a. Navigate to a desired project space directory from remote desktop terminal
b. mv ~/.vscode-server /your/big/disk/project/space
c. ln -s /your/big/disk/project/space/.vscode-server ~/.vscode-server
d. Use full absolute paths in previous command to avoid cyclic links. Confirm with below command, it shoud not return anything.
 $ find -L ./ -mindepth 15
e. Reconnect from your VSCode again
</code></pre></li>
<li>If failed, manually setup vscode-server on remote large free space directory:

<pre><code>a. Get vscode-server commit ID on remote server using below command, which would be like 'e2d4cc38bb5da82wb67q86fd50f84h67bb340987'
 $ ls ~/.vscode-server/bin
b. Download tarball replacing $COMMIT_ID with the the commit number from the previous step on local system: https://update.code.visualstudio.com/commit:$COMMIT_ID/server-linux-x64/stable
c. Move tarball to remote server disk from local system:
 $ scp -P 22 vscode-server-linux-x64.tar.gz remoteID.remote.system.url.com:~/
d. Move tarball to large free space directory as below:
 $ mkdir -p /your/big/disk/project/space/.vscode-server/bin/$COMMIT_ID/
 $ mv ~/vscode-server-linux-x64.tar.gz /your/big/disk/project/space/.vscode-server/bin/$COMMIT_ID/
e. Extract tarball in this directory
 $ cd /your/big/disk/project/space/.vscode-server/bin/$COMMIT_ID
 $ tar -xvzf vscode-server-linux-x64.tar.gz --strip-components 1
f. Create symlink of .vscode-server in your home directory
 $ ln -s /your/big/disk/project/space/.vscode-server ~/.vscode-server
g. Connect again
</code></pre></li>
</ol>

blocks|key|2329335|text|如果您希望通过WSL设置SSH遥控器，我不确定这是否可行。但是，您可以设置WSL远程(https://code.visualstudio.com/docs/remote/wsl-tutorial)和SSH远程(https://code.visualstudio.com/docs/remote/ssh-tutorial)。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|2329336|这里的缺点是您的WSL使用它自己的SSH命令，与SSH+VSCode使用的命令是分开的，并且两者默认使用不同的配置文件。虽然您可以指示VSCode使用WSL的SSH命令使用的SSH配置文件，但这是不可取的，因为可能存在不同的版本和冲突，以及从WSL外部编辑WSL存储中的文件的问题(我将尝试查找参考)。|2329337|entityMap|0|LINK|mutability|MUTABLE|url|https://code.visualstudio.com/docs/remote/wsl-tutorial|1|https://code.visualstudio.com/docs/remote/ssh-tutorial^0|17|1I|0|2X|1I|1|0|0^^$0|@$1|2|3|4|5|6|7|P|8|@]|9|@$A|Q|B|R|1|S]|$A|T|B|U|1|V]]|C|$]]|$1|D|3|E|5|6|7|W|8|@]|9|@]|C|$]]|$1|F|3|-4|5|6|7|X|8|@]|9|@]|C|$]]]|G|$H|$5|I|J|K|C|$L|M]]|N|$5|I|J|K|C|$L|O]]]]

If you're looking to set up an SSH Remote through WSL, I'm not sure that's possible yet. However, you can set up WSL Remotes (<a href="https://code.visualstudio.com/docs/remote/wsl-tutorial" rel="nofollow noreferrer">https://code.visualstudio.com/docs/remote/wsl-tutorial</a>) and SSH Remotes (<a href="https://code.visualstudio.com/docs/remote/ssh-tutorial" rel="nofollow noreferrer">https://code.visualstudio.com/docs/remote/ssh-tutorial</a>).
The downside here is your WSL uses it's own SSH command, separate to the SSH VSCode uses, and both use different configuration files by default. Whilst you can point VSCode to use the SSH configuration file used by WSL's SSH command, it is inadvisable due to probable different versions and the conflicts there of, plus the issues with editing files in the WSL storage from outside of WSL (I'll try to find a reference).

blocks|key|5541856|text|您可以在windows下创建包含以下内容的ssh.bat文件：|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|5541857|C:\Windows\system32\wsl.exe+ssh+%25*|code-block|syntax|javascript|5541858|然后设置VS代码设置"remote.SSH.path“以指向该bat文件。|5541859|您将在VS+Code中拥有与在WSL中相同的ssh配置和凭证。|5541860|entityMap^0|L|7|0|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@$9|R|A|S|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|T|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|U|8|@]|D|@]|E|$]]|$1|M|3|N|5|6|7|V|8|@]|D|@]|E|$]]|$1|O|3|-4|5|6|7|W|8|@]|D|@]|E|$]]]|P|$]]

You can create <code>ssh.bat</code> file under windows with the content:
<pre><code>C:\Windows\system32\wsl.exe ssh %*
</code></pre>
And than set VS Code setting &quot;remote.SSH.path&quot; to point to that bat file. 
You’ll have the same ssh configuration and credentials in VS Code as you have in WSL.

blocks|key|3429944|text|我发现这篇文章很适合我使用VSCode通过ssh连接到远程主机，使用windows10的wsl+ubuntu中的ssh配置。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3429945|https://zitseng.com/archives/20325|offset|length|3429946|因为我使用的是受密码保护的密钥，所以我还必须启用ssh代理并向其添加密钥，才能使其正常工作。|3429947|更新:不幸的是，WSL的ssh服务不能自动启动，我不得不添加另一个.bat文件，正如这里https://superuser.com/a/1506722/239839所解释的那样。|3429948|除此之外，我还需要首先打开一个WSL控制台，使用ssh-add+mykey，然后执行到主机的第一个ssh连接。如果我不这样做，系统会一直要求我输入ssh密钥的密码。|style|CODE|3429949|最好的|3429950|entityMap|0|LINK|mutability|MUTABLE|url|1|https://superuser.com/a/1506722/239839^0|0|0|Y|0|0|0|18|12|1|0|O|D|0|0^^$0|@$1|2|3|4|5|6|7|Y|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|Z|8|@]|9|@$D|10|E|11|1|12]]|A|$]]|$1|F|3|G|5|6|7|13|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|14|8|@]|9|@$D|15|E|16|1|17]]|A|$]]|$1|J|3|K|5|6|7|18|8|@$D|19|E|1A|L|M]]|9|@]|A|$]]|$1|N|3|O|5|6|7|1B|8|@]|9|@]|A|$]]|$1|P|3|-4|5|6|7|1C|8|@]|9|@]|A|$]]]|Q|$R|$5|S|T|U|A|$V|C]]|W|$5|S|T|U|A|$V|X]]]]

I found this post which worked fine for me to use VSCode to connect to remote host through ssh, using the ssh configuration in the wsl ubuntu in windows 10.
<a href="https://zitseng.com/archives/20325" rel="nofollow noreferrer">https://zitseng.com/archives/20325</a>
As I am using a passphrase protected key, I had also to enable the ssh agent and add to it the key, to make it work.
update: Unfortunately, the ssh service for WSL does not start automatically, and I had to add another .bat file, as explained here <a href="https://superuser.com/a/1506722/239839">https://superuser.com/a/1506722/239839</a>
Besides that, I still need to open first a WSL console, use <code>ssh-add mykey</code> and then perform a first ssh connection to the host. If I don't do this, I keep being asked to type my password for the ssh key.
Best

blocks|key|5541926|text|在您选择的.bat文件中，在VSCode配置中编写Windowssh%25*，将remote.ssh.path更改为在步骤1中创建的文件的路径，例如c:\Users\goyuninfo\ssh.bat查找您的WSL+SSH配置文件，假设~/.ssh/config获取该文件的Windows路径，假设\wsl$\Ubuntu-20.04\home.ssh\config将remote.SSH.configFile更改为步骤4中找到的路径。enter+link+description+here|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|5541927|entityMap|0|LINK|mutability|MUTABLE|url|https://onjvm.blogspot.com/2021/04/share-wsl-ssh-connection-to-vscode-on.html^0|60|R|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@$A|M|B|N|1|O]]|C|$]]|$1|D|3|-4|5|6|7|P|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]]]

In a .bat file of your choice, write C:\Windows\system32\wsl.exe ssh %*
In VSCode configurations, change remote.ssh.path to the path of the file created in step 1, such as c:\Users\goyuninfo\ssh.bat
Find your WSL SSH config file, assuming ~/.ssh/config
Get that file Windows path, assuming \wsl$\Ubuntu-20.04\home&lt;username&gt;.ssh\config
Change remote.SSH.configFile to the path found in step 4.
<a href="https://onjvm.blogspot.com/2021/04/share-wsl-ssh-connection-to-vscode-on.html" rel="nofollow noreferrer">enter link description here</a>

blocks|key|2334637|text|Hazzard17提供的答案对我不再有效。我认为问题出在VSCode和输入密码上。我使用sshpass修复了这个问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2334638|安装：|2334639|sudo+apt-get+install+sshpass|code-block|syntax|javascript|2334640|SSH.Remote.path文件内容|2334641|C:\Windows\system32\wsl.exe+sshpass+-p+<password>+ssh+%25*|2334642|注意:我找不到通过vscode输入密码的方法，所以我将密码硬编码到文件中(这意味着您每次都必须更改密码。|2334643|entityMap^0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|R|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|S|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|T|8|@]|9|@]|A|$]]|$1|K|3|L|5|F|7|U|8|@]|9|@]|A|$G|H]]|$1|M|3|N|5|6|7|V|8|@]|9|@]|A|$]]|$1|O|3|-4|5|6|7|W|8|@]|9|@]|A|$]]]|P|$]]

The answer provided by Hazzard17 no longer worked for me. I think the problem was with VSCode and inputting the password. I fixed the problem using sshpass.
Installing:
<pre><code>sudo apt-get install sshpass
</code></pre>
SSH.Remote.path file contents
<pre><code>C:\Windows\system32\wsl.exe sshpass -p &lt;password&gt; ssh %*
</code></pre>
Note: I couldn't find a way to input the password through vscode, so I hardcoded the password into the file (which means you have to change the password every time.

blocks|key|2329428|text|如果在ssh.bat文件中编写C:\Windows\system32\wsl.exe+ssh+%25*很有效，但在~/.bashrc没有来源的情况下会出现问题，请将命令替换为|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2329429|C:\Windows\system32\wsl.exe+bash+-ic+'ssh+%25*'|code-block|syntax|javascript|2329430|此调整在交互式bash+shell中运行ssh命令，它是~/.bashrc的来源。使用上面的方法修复了我在VSCode远程终端上的Ubuntu+ssh-agent不能转发密钥的问题。|2329431|entityMap^0|3|7|F|Y|1J|9|0|0|K|3|S|9|20|9|0^^$0|@$1|2|3|4|5|6|7|O|8|@$9|P|A|Q|B|C]|$9|R|A|S|B|C]|$9|T|A|U|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|V|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|W|8|@$9|X|A|Y|B|C]|$9|Z|A|10|B|C]|$9|11|A|12|B|C]]|D|@]|E|$]]|$1|M|3|-4|5|6|7|13|8|@]|D|@]|E|$]]]|N|$]]

If writing <code>C:\Windows\system32\wsl.exe ssh %*</code> in an <code>ssh.bat</code> file mostly works but gives you issues where your <code>~/.bashrc</code> is not sourced, replace the command with
<pre><code>C:\Windows\system32\wsl.exe bash -ic 'ssh %*'
</code></pre>
This tweak runs the <code>ssh</code> command in an interactive bash shell, which sources your <code>~/.bashrc</code>. Using the above fixed an issue I had with the Ubuntu <code>ssh-agent</code> not forwarding keys on VSCode remote terminal.

I am using WSL on windows 10 to program, and recently discovered that VS code can be used to edit programs through SSH. 

However, I normally SSH into my university's computers through WSL so i can access the files on those systems and use their GPUs. 

Is there any way to SSH into WSL using vscode, and then ssh into my universities systems, and have access to their resources and filesystems from with within vscode?

Can I ssh from WSL in visual studio code?

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

我在Windows10上使用WSL编程，最近发现VS代码可以用来通过SSH编辑程序。但是，我通常通过WSL通过SSH连接到我大学的计算机，这样我就可以访问这些系统上的文件并使用他们的GPU。有没有办法使用vscode通过SSH进入WSL，然后通过ssh进入我的大学系统，并从vscode中访问他们的资源和文件系统？

问我可以在visual studio代码中从WSL中ssh吗？
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问我可以在visual studio代码中从WSL中ssh吗？EN