blocks|key|796805|text|尝试安装软件包以使其工作。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|796806|npm+install+or+npm+i|code-block|syntax|javascript|796807|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

try to install the packages to make it work
<pre><code>npm install or npm i
</code></pre>

blocks|key|1581804|text|对于此错误，请在项目当前工作目录中的终端上使用以下命令|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1581805|npm+install
npm+run+dev|code-block|syntax|javascript|1581806|首先，尝试安装一个节点包管理器，然后运行npm，希望它能工作。|1581807|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

For this error use the following command on your terminal in the present working directory of the project
<pre><code>npm install
npm run dev
</code></pre>
first, try to install a node package manager and then run npm run dev hope it will work

blocks|key|796879|text|yarn+add+vite|type|code-block|depth|inlineStyleRanges|entityRanges|data|syntax|javascript|796880|在项目文件夹中添加vite，然后运行|unstyled|796881|npm+run+dev|796882|再来一次。|796883|请记住将节点版本更新为18，来自17的LTS可能不支持此安装。|unordered-list-item|796884|更新：|offset|length|style|BOLD|796885|我尝试重新安装我的Laravel9.19，因为我已经将我的节点更新到了18版本，所以npm+install+&+npm+run+dev没有纱线就能正常工作。|CODE|796886|entityMap^0|0|0|0|0|0|0|3|0|16|P|0^^$0|@$1|2|3|4|5|6|7|Y|8|@]|9|@]|A|$B|C]]|$1|D|3|E|5|F|7|Z|8|@]|9|@]|A|$]]|$1|G|3|H|5|6|7|10|8|@]|9|@]|A|$B|C]]|$1|I|3|J|5|F|7|11|8|@]|9|@]|A|$]]|$1|K|3|L|5|M|7|12|8|@]|9|@]|A|$]]|$1|N|3|O|5|F|7|13|8|@$P|14|Q|15|R|S]]|9|@]|A|$]]|$1|T|3|U|5|F|7|16|8|@$P|17|Q|18|R|V]]|9|@]|A|$]]|$1|W|3|-4|5|F|7|19|8|@]|9|@]|A|$]]]|X|$]]

<pre><code>yarn add vite
</code></pre>
on project folder to add vite,
and run
<pre><code>npm run dev
</code></pre>
again.
<ul>
<li>remember to update your node version to 18, LTS from 17 might not support this installation.</li>
</ul>
update:
I try to fresh install again my Laravel 9.19, since i had update my node to version 18, <code>npm install &amp; npm run dev</code> just work fine without yarn.

blocks|key|1593484|text|根据文件https://vitejs.dev/guide/#community-templates|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|1593485|npm+install
npm+run+dev
npx+vite+build|code-block|syntax|javascript|1593486|entityMap|0|LINK|mutability|MUTABLE|url|https://vitejs.dev/guide/#community-templates^0|4|19|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@$A|R|B|S|1|T]]|C|$]]|$1|D|3|E|5|F|7|U|8|@]|9|@]|C|$G|H]]|$1|I|3|-4|5|6|7|V|8|@]|9|@]|C|$]]]|J|$K|$5|L|M|N|C|$O|P]]]]

According to documentation <a href="https://vitejs.dev/guide/#community-templates" rel="nofollow noreferrer">https://vitejs.dev/guide/#community-templates</a>
<pre><code>npm install
npm run dev
npx vite build
</code></pre>

blocks|key|1581836|text|我发现自己也处于同样的境地。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1581837|问题是vite.cmd不在系统或用户路径变量中，因此在从项目文件夹执行时找不到它。|1581838|要修复它，您应该临时添加路径变量中vite.cmd所在的文件夹(对于整个系统或用户)。我建议只为您的用户添加它，并且请记住，您可能应该在停止处理该项目之后删除它，因为这可能会影响使用相同构建工具的未来项目。|1581839|为此，请执行以下操作：|1581840|我的PC+>属性>高级系统设置>单击环境变量(或者只需使用“开始”按钮并开始键入“环境”，您应该得到一个直接链接)|unordered-list-item|1581841|在“用户变量”上找到“路径”并编辑它。|1581842|为vite.cmd所在的文件夹添加一个新条目。示例"C:\dev\reactplayground\firsttest\test01\node_modules.bin“检查项目文件夹以找到正确的路径。|1581843|请确保关闭并打开控制台以使此更改产生影响。|1581844|返回到您的项目根文件夹并运行"vite+build"，它现在应该可以工作了。|1581845|entityMap^0|0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|V|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|W|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|X|8|@]|9|@]|A|$]]|$1|H|3|I|5|J|7|Y|8|@]|9|@]|A|$]]|$1|K|3|L|5|J|7|Z|8|@]|9|@]|A|$]]|$1|M|3|N|5|J|7|10|8|@]|9|@]|A|$]]|$1|O|3|P|5|J|7|11|8|@]|9|@]|A|$]]|$1|Q|3|R|5|J|7|12|8|@]|9|@]|A|$]]|$1|S|3|-4|5|6|7|13|8|@]|9|@]|A|$]]]|T|$]]

I found myself in the same situation.
The problem is vite.cmd is not in the system or user PATH variable, so it cannot be found when it is executed from your project folder.
To fix it, you should temporarily add the folder where vite.cmd is in your PATH variable (either for the entire system or your user). I recommend adding it just for your user, and keep in mind you should probably remove it after you stop working on that project, because this could affect future projects using the same build tools.
To do this:
<ul>
<li>My PC &gt; Properties &gt; Advanced system settings &gt; Click on Environment Variables (alternatively just use the start button and begin typing Environment, you should get a direct link)</li>
<li>On &quot;User variables&quot; find &quot;Path&quot; and edit it.</li>
<li>Add a new entry for the folder where vite.cmd is. Example &quot;C:\dev\reactplayground\firsttest\test01\node_modules.bin&quot; Check your project folder to find the right path.</li>
<li>Make sure your close and open your console for this change to affect.</li>
<li>Go back to your project root folder and run &quot;vite build&quot;, it should work now.</li>
</ul>

blocks|key|1593411|text|对我来说我：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1593412|1-+excuted+yarn+add+vite|offset|length|style|CODE|1593413|2-然后是npm+install|1593414|干得好！|1593415|entityMap^0|0|B|D|0|5|B|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|O|8|@$D|P|E|Q|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|R|8|@$D|S|E|T|F|G]]|9|@]|A|$]]|$1|J|3|K|5|6|7|U|8|@]|9|@]|A|$]]|$1|L|3|-4|5|6|7|V|8|@]|9|@]|A|$]]]|M|$]]

for me I've:
 1 - excuted <code>yarn add vite</code> 
2- and then <code>npm install</code>
work fine !

blocks|key|1593538|text|对于我来说，我在一台计算机上创建了一个项目，它在devDependencies中实现了这样的功能：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1593539|"vite":+"%5E3.1.0"|code-block|syntax|javascript|1593540|我做了pnpm+install，报告说一切都很好，但我得到了错误。我运行了pnpm+install+vite，它再次安装了以下代码：|offset|length|style|CODE|1593541|"vite":+"%5E3.1.8"|1593542|从那以后一切都很顺利。因此，尝试使用npm，纱线，或pnpm再次安装vite包，看看这是否有效。|1593543|entityMap^0|0|0|3|C|11|H|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|T|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|U|8|@$I|V|J|W|K|L]|$I|X|J|Y|K|L]]|9|@]|A|$]]|$1|M|3|N|5|D|7|Z|8|@]|9|@]|A|$E|F]]|$1|O|3|P|5|6|7|10|8|@]|9|@]|A|$]]|$1|Q|3|-4|5|6|7|11|8|@]|9|@]|A|$]]]|R|$]]

For me I had a project I created on one computer and it had this in devDependencies:
<pre><code>&quot;vite&quot;: &quot;^3.1.0&quot;
</code></pre>
I did <code>pnpm install</code> and it reported everything was fine, but I was getting the error. I ran <code>pnpm install vite</code> and it installed it again with this:
<pre><code>&quot;vite&quot;: &quot;^3.1.8&quot;
</code></pre>
After that it worked fine. So try using npm, yarn, or pnpm to install the vite package again and see if that works.

blocks|key|796842|text|您需要15或更高版本，我也遇到了同样的问题，因为我使用的是它的旧版本。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|796843|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

You need Node version 15 or higher, I had the same problem because I was using an older version of it.

blocks|key|1593382|text|需要安装package.json中的所有软件包并再次运行|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1593383|npm+i
npm+run+dev|code-block|syntax|javascript|1593384|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

Needs to install all the packages in package.json and run again
<pre><code>npm i
npm run dev
</code></pre>

blocks|key|1593517|text|对我来说，这是可行的：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1593518|我将NODE_ENV环境变量更改为development+(之前是production+--不应该是这样，因为开发依赖项不会被npm+install或yarn安装)|offset|length|style|CODE|1593519|以下是在运行npm+install或yarn之前要确保的内容|1593520|+Make+sure+`NODE_ENV`+environment+variable+is+not+set+to+`production`+if+you+running+locally+for+dev+purpose.|code-block|syntax|javascript|1593521|entityMap^0|0|H|B|X|A|1R|B|23|4|0|6|B|I|4|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|R|8|@$D|S|E|T|F|G]|$D|U|E|V|F|G]|$D|W|E|X|F|G]|$D|Y|E|Z|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|10|8|@$D|11|E|12|F|G]|$D|13|E|14|F|G]]|9|@]|A|$]]|$1|J|3|K|5|L|7|15|8|@]|9|@]|A|$M|N]]|$1|O|3|-4|5|6|7|16|8|@]|9|@]|A|$]]]|P|$]]

For me this worked:
I changed NODE_ENV environment variable to <code>development</code> ( earlier it was <code>production</code> - which should not be the case, as dev-dependencies won't get installed by <code>npm install</code> or <code>yarn</code> )
Here is what to make sure before running <code>npm install</code> or <code>yarn</code>:
<pre><code> Make sure `NODE_ENV` environment variable is not set to `production` if you running locally for dev purpose.


 
</code></pre>

blocks|key|790176|text|试试npm+install|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|790177|然后是npm+run+build|790178|entityMap^0|2|B|0|3|D|0^^$0|@$1|2|3|4|5|6|7|J|8|@$9|K|A|L|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|M|8|@$9|N|A|O|B|C]]|D|@]|E|$]]|$1|H|3|-4|5|6|7|P|8|@]|D|@]|E|$]]]|I|$]]

try <code>npm install</code>
then <code>npm run build</code>

blocks|key|1582064|text|最近遇到了这个错误，我运行|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1582065|npm+install

npm+run+dev|code-block|syntax|javascript|1582066|然后输出为VITE+v3.2.4++ready+in+1913+ms|offset|length|style|CODE|1582067|太酷了|1582068|参考链接|1582069|entityMap|0|LINK|mutability|MUTABLE|url|https://vitejs.dev/guide/#community-templates^0|0|0|5|T|0|0|2|2|0|0^^$0|@$1|2|3|4|5|6|7|Y|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|Z|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|10|8|@$I|11|J|12|K|L]]|9|@]|A|$]]|$1|M|3|N|5|6|7|13|8|@]|9|@]|A|$]]|$1|O|3|P|5|6|7|14|8|@]|9|@$I|15|J|16|1|17]]|A|$]]|$1|Q|3|-4|5|6|7|18|8|@]|9|@]|A|$]]]|R|$S|$5|T|U|V|A|$W|X]]]]

Recently faced this error and I run
<pre><code>npm install

npm run dev
</code></pre>
then the output was
<code>VITE v3.2.4 ready in 1913 ms</code>
THAT'S COOL 
reference <a href="https://vitejs.dev/guide/#community-templates" rel="nofollow noreferrer">LINK</a>

blocks|key|1582079|text|“‘vite”不被识别为内部或外部命令、可操作的程序或批处理文件。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1582080|>+vite|1582081|1582082|尝试安装软件包以使其工作。|1582083|npm安装或npm+i|offset|length|style|BOLD|1582084|entityMap^0|0|0|0|0|0|B|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|P|8|@]|9|@]|A|$]]|$1|D|3|4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|E|3|F|5|6|7|R|8|@]|9|@]|A|$]]|$1|G|3|H|5|6|7|S|8|@$I|T|J|U|K|L]]|9|@]|A|$]]|$1|M|3|-4|5|6|7|V|8|@]|9|@]|A|$]]]|N|$]]

'vite' is not recognized as an internal or external command, operable program or batch file.
<h5>&gt; vite</h5>
'vite' is not recognized as an internal or external command,
operable program or batch file.
try to install the packages to make it work
npm install or npm i

I'm using Node.js and npm for the first time, I'm trying to get Vite working, following the tutorials and documentation. But every time I run into the problem <code>'vite' is not recognized as an internal or external command, operable program or batch file</code>. I have been trying to find a solution for 4 hours now but with no results.
I tried restarting pc, reinstalling node.js, several procedures to create vite project but in vain. I suppose it's my beginner's mistake, but I really don't know what to do anymore.
Commands and responses I run when I try to create a vite project: 
<code>npm create vite@latest</code> 
&gt;&gt; my-portfolio &gt;&gt; vanilla &amp; vanilla 
<code>cd my-portfolio</code> 
<code>npm install</code> &gt;&gt;resp: up to date, audited 1 package in 21s found 0 vulnerabilities
<code>npm run dev</code> 
resp:
<pre><code>&gt; my-portfolio@0.0.0 dev
&gt; vite

'vite' is not recognized as an internal or external command,
operable program or batch file.
</code></pre>

"vite is not recognized ..." on "npm run dev"

我第一次使用Node.js和npm，我试图让Vite工作，遵循教程和文档。但是每次我遇到这个问题，'vite' is not recognized as an internal or external command, operable program or batch file。我已经找了4个小时的解决方案，但没有结果。我试着重新启动pc，重新安装node.js，几个创建vite项目的过程，但都

问"vite不被承认.“论"npm运行开发“
EN

回答 13

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问"vite不被承认.“论"npm运行开发“EN

回答 13

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问"vite不被承认.“论"npm运行开发“
EN