DPDK pdump未能热插拔添加设备
DPDK pdump未能热插拔添加设备
提问于 2020-07-08 12:39:04
我正在尝试使用dpdk在dpdk控制下从NIC捕获tx数据包。
设置
- DPDK 18.11.4
- 在
config/common_base中，CONFIG_RTE_LIBRTE_PMD_PCAP=y和CONFIG_RTE_LIBRTE_PDUMP=y已经设置好了 - 重建后，
CONFIG_RTE_LIBRTE_PMD_PCAP=y和CONFIG_RTE_LIBRTE_PDUMP=y也在x86_64-native-linuxapp-gcc/.config中设置。 - 在主进程的init和
rte_pdump_uninit()中调用rte_pdump_uninit()和破坏函数 - DPDK接口
Network devices using DPDK-compatible driver
============================================
0000:03:00.0 '82599ES 10-Gigabit SFI/SFP+ Network Connection 10fb' drv=igb_uio unused=ixgbe,uio_pci_generic
Network devices using kernel driver
===================================
0000:03:00.1 '82599ES 10-Gigabit SFI/SFP+ Network Connection 10fb' if=ens1f1 drv=ixgbe unused=igb_uio,uio_pci_generic
0000:05:00.0 'I210 Gigabit Network Connection 1533' if=enp5s0 drv=igb unused=igb_uio,uio_pci_generic *Active*
0000:06:00.0 'I210 Gigabit Network Connection 1533' if=enp6s0 drv=igb unused=igb_uio,uio_pci_generic输出
初生过程
EAL: Detected 24 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Probing VFIO support...
EAL: PCI device 0000:03:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:03:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL: probe driver: 8086:1533 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1533 net_e1000_igb
INFO: eth dev count 1.
Port 0 MAC: 9c 69 b4 60 90 1c
WARNING: Too many lcores enabled. Only 1 used.
Core 0 forwarding packets. [Ctrl+C to quit]
EAL: failed to parse device "vdev:net_pcap_tx_0"
EAL: Failed to hotplug add device on primary二次过程
由sudo ./build/app/dpdk-pdump -- --pdump 'port=0,queue=*,tx-dev=./tx.pcap'运行
EAL: Detected 24 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket_16018_96447662088dc
EAL: Probing VFIO support...
EAL: PCI device 0000:03:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:03:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL: probe driver: 8086:1533 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1533 net_e1000_igb
EAL: Failed to hotplug add device
EAL: Error - exiting with code: 1
Cause: vdev creation failed期望值
我怎么才能得到正确的dpdk-pdump？
编辑更新2020/7/12
在修改skeleton(将port修改为0并添加rte_pdump_init/uninit())之后，它仍然无法工作。
PS：skeleton和my program是用共享库构建的。
骨架码
static __attribute__((noreturn)) void
lcore_main(void)
{
uint16_t port;
/*
* Check that the port is on the same NUMA node as the polling thread
* for best performance.
*/
RTE_ETH_FOREACH_DEV(port)
if (rte_eth_dev_socket_id(port) > 0 &&
rte_eth_dev_socket_id(port) !=
(int)rte_socket_id())
printf("WARNING, port %u is on remote NUMA node to "
"polling thread.\n\tPerformance will "
"not be optimal.\n", port);
printf("\nCore %u forwarding packets. [Ctrl+C to quit]\n",
rte_lcore_id());
/* Run until the application is quit or killed. */
for (;;) {
/*
* Receive packets on a port and forward them on the paired
* port. The mapping is 0 -> 1, 1 -> 0, 2 -> 3, 3 -> 2, etc.
*/
port = 0;
/* Get burst of RX packets, from first port of pair. */
struct rte_mbuf *bufs[BURST_SIZE];
const uint16_t nb_rx = rte_eth_rx_burst(port, 0,
bufs, BURST_SIZE);
if (unlikely(nb_rx == 0))
continue;
/* Send burst of TX packets, to second port of pair. */
const uint16_t nb_tx = rte_eth_tx_burst(port ^ 1, 0,
bufs, nb_rx);
/* Free any unsent packets. */
if (unlikely(nb_tx < nb_rx)) {
uint16_t buf;
for (buf = nb_tx; buf < nb_rx; buf++)
rte_pktmbuf_free(bufs[buf]);
}
}
}
static void
signal_handler(int signum)
{
if (signum == SIGINT || signum == SIGTERM) {
printf("\nSignal %d received, preparing to exit...\n",
signum);
/* uninitialize packet capture framework */
rte_pdump_uninit();
/* exit with the expected status */
signal(signum, SIG_DFL);
kill(getpid(), signum);
}
}
/*
* The main function, which does initialization and calls the per-lcore
* functions.
*/
int
main(int argc, char *argv[])
{
struct rte_mempool *mbuf_pool;
unsigned nb_ports;
uint16_t portid;
signal(SIGINT, signal_handler);
signal(SIGTERM, signal_handler);
/* Initialize the Environment Abstraction Layer (EAL). */
int ret = rte_eal_init(argc, argv);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
argc -= ret;
argv += ret;
rte_pdump_init(NULL);
/* Check that there is an even number of ports to send/receive on. */
nb_ports = rte_eth_dev_count_avail();
// if (nb_ports < 2 || (nb_ports & 1))
// rte_exit(EXIT_FAILURE, "Error: number of ports must be even\n");
/* Creates a new mempool in memory to hold the mbufs. */
mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
MBUF_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
/* Initialize all ports. */
RTE_ETH_FOREACH_DEV(portid)
if (port_init(portid, mbuf_pool) != 0)
rte_exit(EXIT_FAILURE, "Cannot init port %"PRIu16 "\n",
portid);
if (rte_lcore_count() > 1)
printf("\nWARNING: Too many lcores enabled. Only 1 used.\n");
/* Call lcore_main on the master core only. */
lcore_main();
return 0;
}初生过程
EAL: Detected 24 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Probing VFIO support...
EAL: PCI device 0000:03:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:03:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL: probe driver: 8086:1533 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1533 net_e1000_igb
Port 0 MAC: 9c 69 b4 60 90 1c
WARNING: Too many lcores enabled. Only 1 used.
Core 0 forwarding packets. [Ctrl+C to quit]
EAL: Failed to hotplug add device on secondary第二过程
命令sudo ./build/app/dpdk-pdump -- --pdump 'port=0,queue=*,tx-dev=./tx.pcap'
EAL: Detected 24 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket_27816_cdf9e536de2e0
EAL: Probing VFIO support...
EAL: PCI device 0000:03:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:03:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL: probe driver: 8086:1533 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1533 net_e1000_igb
EAL: failed to parse device "vdev:net_pcap_tx_0"
EAL: failed to parse device "vdev:net_pcap_tx_0"
EAL: Failed to hotplug add device
EAL: Error - exiting with code: 1
Cause: vdev creation failed我也尝试过dpdk-pdump 9.4示例，错误消息是相似的。
初生过程
testpmd>
Port 0: link state change event
EAL: Failed to hotplug add device on secondary第二过程
EAL: failed to parse device "vdev:net_pcap_rx_0"
EAL: failed to parse device "vdev:net_pcap_rx_0"
EAL: Failed to hotplug add device
EAL: Error - exiting with code: 1
Cause: vdev creation failed:create_mp_ring_vdev:722回答 1
Stack Overflow用户
回答已采纳
发布于 2020-07-13 04:31:30
我可以让它正常工作，没有问题。以下是以下步骤：
- 下载18.11.4
http://static.dpdk.org/rel/dpdk-18.11.4.tar.gz - 启用PCAP PMD构建DPDK
- 修改主干main:在
rte_pdump_init(NULL)后面添加rte_eal_init - 修改框架lcore_main:用
for (port = 0; port < 2; port++)修改RTE_ETH_FOREACH_DEV(port) - 牛头：
LD_FLAGS="-lrte_pmd_pcap" make - 运行主
- 运行pdump备用程序(如果在主目录中传递白名单，则在这里传递相同的内容)
EAL: request: eal_dev_mp_request
EAL: msg: eal_dev_mp_request
EAL: request: bus_vdev_mp
EAL: msg: bus_vdev_mp
EAL: msg: bus_vdev_mp
EAL: reply: eal_dev_mp_request
EAL: msg: eal_dev_mp_request
Port 2 MAC: 02 70 63 61 70 00
EAL: request: mp_pdump
EAL: msg: mp_pdump页面原文内容由Stack Overflow提供。腾讯云小微IT领域专用引擎提供翻译支持
原文链接：
https://stackoverflow.com/questions/62795017
复制相关文章
相似问题
腾讯云开发者
