blocks|key|2694186|text|不幸的是，目前，这是不可能的(更多的信息，下文)。因此，您建议的创建电子邮件转发规则的解决方案可能是最好的解决方案。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2694187|需要注意的一点是，您可能希望设置电子邮件重定向，而不是电子邮件转发。如果您重定向，最终收件人将看到电子邮件来自原发件人，并以原来的收件人，而不是被转发。在WorkMail中，您会发现在设置规则时，除了转发之外，重定向也是选项之一。|2694188|关于设置重定向/转发规则的额外提示。在规则设置中没有条件只需要转发所有内容。因此，您可能需要创建2个规则。第一个规则使用条件has+my+name+in+the+To+box，第二个规则使用条件Does+not+have+my+name+in+the+To+box。这应该包括您只需重定向/转发所有内容。幸运的是，您可以重定向到多个目的地，因此即使您有多个最终目的地，也可能只使用这2条规则。|offset|length|style|CODE|2694189|无法向组添加外部地址的附加信息：|BOLD|2694190|一位AWS团队成员表示，从2017年开始，这个AWS论坛帖子不支持这一点：|2694191|Indeed,+it+not+possible+to+add+an+external+email+address+to+a+group.+I+will+forward+this+feature+request+to+the+service+team.

A+possible+workaround+is+to+create+a+redirect+rule+that+redirect+emails+sent+to+this+group+to+the+external+users.|code-block|syntax|javascript|2694192|到目前为止，在将成员添加到组(控制台截图)时仍然会收到以下消息：|2694193|You+can+only+add+users+and+groups+that+are+enabled+for+access+to+Amazon+WorkMail.|2694194|编辑，2021-01-17:关于在规则中大量添加电子邮件地址的提示|2694195|将电子邮件地址批量添加到规则中|2694196|不幸的是，目前似乎没有任何API以编程方式创建收件箱规则。然而，您可以复制粘贴大量电子邮件到一个规则。|2694197|首先，您需要将您拥有的一组电子邮件地址导出到例如CSV文件中。|2694198|然后，您需要在每个电子邮件地址中添加一个;。原因是字符被识别为分隔符。如果我们不使用它，电子邮件规则将解释整个粘贴文本为一个单一的电子邮件地址。例如，在Google中，这可以用CONCATENATE来完成。例如=concatenate(A1,";")。这是一张截图：|2694199|📷|atomic|2694200|​|2694201|接下来，打开电子邮件规则，从电子表格中复制电子邮件地址，将它们粘贴到收件人框中，然后单击To按钮。在这种情况下，它是100封电子邮件，所以需要一些时间来加载：|2694202|2694203|2694204|完成加载后，您将看到电子邮件地址旁边的复选框，就像手动添加单个电子邮件地址一样。|2694205|2694206|2694207|确保在“收件人”对话框中单击“Ok”，然后在“规则”对话框中单击“Ok”，最后单击“电子邮件规则设置”面板上的“Save+changes”以确保保存所有内容。|2694208|entityMap|0|LINK|mutability|MUTABLE|url|https://forums.aws.amazon.com/thread.jspa?threadID=259797|1|https://i.stack.imgur.com/rNYbx.png|2|IMAGE|IMMUTABLE|imageUrl|https://developer.qcloudimg.com/http-save/yehe-900000/e65c314aa8f4d568983e250079edcf4b.png|imageAlt|3|https://developer.qcloudimg.com/http-save/yehe-900000/07b0f1a5f78ffbb9d53f12213ffd2d17.png|4|https://developer.qcloudimg.com/http-save/yehe-900000/5d34cf8c7b24dd1e38cbe02760eae755.png^0|0|0|1Q|P|2P|Z|0|0|G|0|L|9|0|0|0|F|5|1|0|0|0|0|E|0|0|0|K|1|2G|B|2X|K|0|0|1|2|0|0|18|2|0|0|1|3|0|0|0|0|1|4|0|0|F|2|X|2|1K|C|0^^$0|@$1|2|3|4|5|6|7|26|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|27|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|28|8|@$F|29|G|2A|H|I]|$F|2B|G|2C|H|I]]|9|@]|A|$]]|$1|J|3|K|5|6|7|2D|8|@$F|2E|G|2F|H|L]]|9|@]|A|$]]|$1|M|3|N|5|6|7|2G|8|@]|9|@$F|2H|G|2I|1|2J]]|A|$]]|$1|O|3|P|5|Q|7|2K|8|@]|9|@]|A|$R|S]]|$1|T|3|U|5|6|7|2L|8|@]|9|@$F|2M|G|2N|1|2O]]|A|$]]|$1|V|3|W|5|Q|7|2P|8|@]|9|@]|A|$R|S]]|$1|X|3|Y|5|6|7|2Q|8|@]|9|@]|A|$]]|$1|Z|3|10|5|6|7|2R|8|@$F|2S|G|2T|H|L]]|9|@]|A|$]]|$1|11|3|12|5|6|7|2U|8|@]|9|@]|A|$]]|$1|13|3|14|5|6|7|2V|8|@]|9|@]|A|$]]|$1|15|3|16|5|6|7|2W|8|@$F|2X|G|2Y|H|I]|$F|2Z|G|30|H|I]|$F|31|G|32|H|I]]|9|@]|A|$]]|$1|17|3|18|5|19|7|33|8|@]|9|@$F|34|G|35|1|36]]|A|$]]|$1|1A|3|1B|5|6|7|37|8|@]|9|@]|A|$]]|$1|1C|3|1D|5|6|7|38|8|@$F|39|G|3A|H|I]]|9|@]|A|$]]|$1|1E|3|18|5|19|7|3B|8|@]|9|@$F|3C|G|3D|1|3E]]|A|$]]|$1|1F|3|1B|5|6|7|3F|8|@]|9|@]|A|$]]|$1|1G|3|1H|5|6|7|3G|8|@]|9|@]|A|$]]|$1|1I|3|18|5|19|7|3H|8|@]|9|@$F|3I|G|3J|1|3K]]|A|$]]|$1|1J|3|1B|5|6|7|3L|8|@]|9|@]|A|$]]|$1|1K|3|1L|5|6|7|3M|8|@$F|3N|G|3O|H|I]|$F|3P|G|3Q|H|I]|$F|3R|G|3S|H|I]]|9|@]|A|$]]|$1|1M|3|-4|5|6|7|3T|8|@]|9|@]|A|$]]]|1N|$1O|$5|1P|1Q|1R|A|$1S|1T]]|1U|$5|1P|1Q|1R|A|$1S|1V]]|1W|$5|1X|1Q|1Y|A|$1Z|20|21|-4]]|22|$5|1X|1Q|1Y|A|$1Z|23|21|-4]]|24|$5|1X|1Q|1Y|A|$1Z|25|21|-4]]]]

Unfortunately, at present, this isn't possible (more info below). So, your proposed solution of creating an email forwarding rule is likely the best solution.
One thing to note is that you may want to set up email redirect rather than email forwarding. If you redirect, the end recipient will see the email as coming from the original sender and addressed to the original recipient, as opposed to being forwarded. In WorkMail, you'll find redirect as one of the options, alongside forwarding, when setting up the rule(s).
One additional tip for setting up the redirect/forwarding rule. There's no condition in the rules setup to just forward everything. Because of that, you'll likely want to create 2 rules. The first rule would use the condition <code>has my name in the To box</code> and the second rule would use the condition <code>Does not have my name in the To box</code>. This should have you covered for just redirecting/forwarding everything. Fortunately, you can redirect to multiple destinations, so you can probably get away with just these 2 rules even if you have multiple final destinations.
<hr />
Additional info about not being able to add external addresses to groups:
An AWS team member has stated that this isn't currently supported in <a href="https://forums.aws.amazon.com/thread.jspa?threadID=259797" rel="nofollow noreferrer">this AWS forum post</a> from 2017:
<pre><code>Indeed, it not possible to add an external email address to a group. I will forward this feature request to the service team.

A possible workaround is to create a redirect rule that redirect emails sent to this group to the external users.
</code></pre>
As of today, you still get the following message when adding members to a group (<a href="https://i.stack.imgur.com/rNYbx.png" rel="nofollow noreferrer">console screenshot</a>):
<pre><code>You can only add users and groups that are enabled for access to Amazon WorkMail.
</code></pre>
<hr />
[Edit, 2021-01-17: Tips on bulk addition of email addresses to a rule]
Bulk addition of email addresses to a rule
Unfortunately, there don't currently appear to be any APIs to create inbox rules programmatically. However, you can copy-paste a large number of emails into a rule.
First, you'll want to export the set of email addresses you have into e.g. a CSV file.
Then, you'll want to append a <code>;</code> to each email address. The reason for this is that the character is recognized as a separator. If we don't use it, the email rule will interpret the entire pasted text as a single email address. As an example, in Google Sheets, this can be done with <code>CONCATENATE</code>. E.g. <code>=concatenate(A1,&quot;;&quot;)</code>. Here's a screenshot:
<a href="https://i.stack.imgur.com/ozKPE.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/ozKPE.png" alt="Setting up an email list" /></a>
Next, open the email rule, copy the email addresses from the spreadsheet, paste them into the recipients box, and click the <code>To</code> button. In this case, it's 100 emails, so it takes a little bit of time to load:
<a href="https://i.stack.imgur.com/FKBYA.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/FKBYA.png" alt="enter image description here" /></a>
Once it finishes loading, you'll see checkboxes next to the email addresses, like when you add single email addresses manually.
<a href="https://i.stack.imgur.com/v1Mmh.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/v1Mmh.png" alt="enter image description here" /></a>
Make sure to click <code>Ok</code> on the recipients dialog, then click <code>Ok</code> on the rule dialog, and finally click <code>Save changes</code> on the Email Rules Settings panel to ensure everything gets saved.

I can create a group on the Amazon WorkMail console and add internal users to the group. However, I do not see an option to add external email addresses with different domains.
Any tips on how to do this? Should I just create an email forwarding rule on an internal user?

How to add external email addresses to AWS WorkMail Group?

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

我可以在Amazon控制台上创建一个组，并将内部用户添加到这个组中。然而，我没有看到一个选项添加外部电子邮件地址与不同的领域。关于怎么做有什么建议吗？我应该在内部用户上创建一个电子邮件转发规则吗？

如何向AWS WorkMail组添加外部电子邮件地址？-腾讯云开发者社区-腾讯云

问如何向AWS WorkMail组添加外部电子邮件地址？
EN

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何向AWS WorkMail组添加外部电子邮件地址？EN

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何向AWS WorkMail组添加外部电子邮件地址？
EN