blocks|key|564568|text|原来我不得不将我的Python扩展的版本从2021.3降到2021.2，现在VSCode终于可以找到Python了。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|564569|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Turns out I had to downgrade the version of my Python extension from Version 2021.3 to 2021.2, now VSCode can finally find the Python path.

blocks|key|564635|text|我也面临着同样的问题。下面是我在不需要卸载的情况下修复它的方法：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|564636|请看这张图片，以供参考：|564637|​|564638|📷|atomic|offset|length|564639|564640|单击角落中的“Python3.8.3+32位”(版本可能与您不同)，并选择调试器或指定位置(如果还没有)。|564641|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://developer.qcloudimg.com/http-save/yehe-900000/add2887d36fc6ef1355237369684a744.png|imageAlt^0|0|0|0|0|1|0|0|0|0^^$0|@$1|2|3|4|5|6|7|W|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|X|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|Y|8|@]|9|@]|A|$]]|$1|F|3|G|5|H|7|Z|8|@]|9|@$I|10|J|11|1|12]]|A|$]]|$1|K|3|E|5|6|7|13|8|@]|9|@]|A|$]]|$1|L|3|M|5|6|7|14|8|@]|9|@]|A|$]]|$1|N|3|-4|5|6|7|15|8|@]|9|@]|A|$]]]|O|$P|$5|Q|R|S|A|$T|U|V|-4]]]]

I was facing the same problem. Here's how I fixed it without having to uninstall:
Look at this image for reference:
<a href="https://i.stack.imgur.com/w9i7q.png" rel="noreferrer"><img src="https://i.stack.imgur.com/w9i7q.png" alt="Screenshot of VS Code" /></a>
Click on the &quot;Python 3.8.3 32-bit&quot; down there in the corner (the version maybe different for you) and select your debugger or specify the location if it's not already there.

blocks|key|1961438|text|Vscode无法找到python路径或尚未设置它。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1961439|打开命令调色板(ctrl%2Bshift%2BP)并键入python并查找"Python:Select解释器“。您将被要求输入安装python的路径。|1961440|在这种情况下，您使用的是虚拟环境，在大多数情况下，这是正确的。查找路径.+.venv/Script/python，否则选择安装在本地机器上的python路径。|1961441|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|H|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|I|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|J|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|G|$]]

Vscode is not able to find the python path or its not yet set.
Open command palette(ctrl+shift+P) and type python and look for &quot;Python:Select Interpreter&quot;.
You will be asked to enter the path of python where it is installed.
Incase you are using virtual environment and in most of the case its true. Look for the path .venv/Script/python
else select the python path where you have installed in your local machine.

blocks|key|1115549|text|Tl;Dr|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1115550|重启Vscode|1115551|要得到的结果|1115552|在Linux版本中，Extensions|1115553|Find+|unordered-list-item|1115554|
|1115555|转到带有ctrl%2Bshift%2Bx的extensions视图，或菜单中的->视图、->、蓝色按钮Reload+required，用于Python+Extension|offset|length|style|CODE|1115556|1115557|Restart+Vscode|1115558|1115559|，它应该工作|1115560|
。|1115561|entityMap^0|0|0|0|0|0|0|4|C|H|A|1B|F|1T|G|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|12|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|13|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|14|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|15|8|@]|9|@]|A|$]]|$1|H|3|I|5|J|7|16|8|@]|9|@]|A|$]]|$1|K|3|L|5|6|7|17|8|@]|9|@]|A|$]]|$1|M|3|N|5|J|7|18|8|@$O|19|P|1A|Q|R]|$O|1B|P|1C|Q|R]|$O|1D|P|1E|Q|R]|$O|1F|P|1G|Q|R]]|9|@]|A|$]]|$1|S|3|L|5|6|7|1H|8|@]|9|@]|A|$]]|$1|T|3|U|5|J|7|1I|8|@]|9|@]|A|$]]|$1|V|3|L|5|6|7|1J|8|@]|9|@]|A|$]]|$1|W|3|X|5|J|7|1K|8|@]|9|@]|A|$]]|$1|Y|3|Z|5|6|7|1L|8|@]|9|@]|A|$]]|$1|10|3|-4|5|6|7|1M|8|@]|9|@]|A|$]]]|11|$]]

<h3>Tl;Dr</h3>
Restart Vscode
<h3>Findings to get there</h3>
<ul>
<li>Go to <code>extensions</code> view with <code>ctrl+shift+x</code> in Linux version or Menu -&gt; View -&gt; Extensions</li>
<li>Find blue Button <code>Reload required</code> for the <code>Python Extension</code></li>
<li>Restart Vscode</li>
<li>It should work</li>
</ul>

blocks|key|1961281|text|您可以尝试这样的方法，但是可以将它定向到系统上安装python程序的地方。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1961282|{
++++"python.pythonPath":+"C:\\Python36\\python.exe"
}|code-block|syntax|javascript|1961283|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

You could try something like this but directing it to wherever your python program is install on your system
<pre><code>{
 &quot;python.pythonPath&quot;: &quot;C:\\Python36\\python.exe&quot;
}
</code></pre>

blocks|key|1961655|text|我的情况是:我找不到根本的原因，但可以找到如下解决办法。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1961656|1961657|不使用Run+->启动调试(或运行->运行而不进行调试)。这将引发打开终端的problem.|unordered-list-item|1961658|Instead，。将目录更改为python文件所在的位置。然后，执行命令，如"python+test.py".|1961659|。|1961660|这解决了问题，代码正常运行。|1961661|简而言之，我的解决办法是只使用VSCode作为编辑器，并通过终端(命令提示符、power+shell等)运行代码。|1961662|entityMap^0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|P|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|R|8|@]|9|@]|A|$]]|$1|F|3|G|5|E|7|S|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|T|8|@]|9|@]|A|$]]|$1|J|3|K|5|6|7|U|8|@]|9|@]|A|$]]|$1|L|3|M|5|6|7|V|8|@]|9|@]|A|$]]|$1|N|3|-4|5|6|7|W|8|@]|9|@]|A|$]]]|O|$]]

My Case:
I couldn't find the underlying reason, but could find a workaround as follows.
<ul>
<li>Do not use Run -&gt; Start Debugging (or Run -&gt; Run without Debugging). This raises the problem.</li>
<li>Instead, open the terminal. Change directory to where your python file is. Then, do command such as &quot;python test.py&quot;.</li>
</ul>
This solves the problem and the code runs normally.
In short, my workaround is to use VSCode as only an editor, and run codes via terminals (command prompt, power shell etc.).

blocks|key|564945|text|添加"cwd":+"${fileDirname}"|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|564946|就像这样|564947|++"configurations":+[
++++{
++++++"name":+"Python:+Current+File",
++++++"type":+"python",
++++++"request":+"launch",
++++++"program":+"${file}",
++++++"console":+"integratedTerminal",
++++++"justMyCode":+true,
++++++"cwd":+"${fileDirname}"
++++},
...|code-block|syntax|javascript|564948|entityMap^0|2|N|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@$9|P|A|Q|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|R|8|@]|D|@]|E|$]]|$1|H|3|I|5|J|7|S|8|@]|D|@]|E|$K|L]]|$1|M|3|-4|5|6|7|T|8|@]|D|@]|E|$]]]|N|$]]

add <code>&quot;cwd&quot;: &quot;${fileDirname}&quot;</code>
like so
<pre><code> &quot;configurations&quot;: [
 {
 &quot;name&quot;: &quot;Python: Current File&quot;,
 &quot;type&quot;: &quot;python&quot;,
 &quot;request&quot;: &quot;launch&quot;,
 &quot;program&quot;: &quot;${file}&quot;,
 &quot;console&quot;: &quot;integratedTerminal&quot;,
 &quot;justMyCode&quot;: true,
 &quot;cwd&quot;: &quot;${fileDirname}&quot;
 },
...
</code></pre>

blocks|key|564750|text|我今天在VScode上也遇到了类似的问题。每次尝试运行脚本时，我都会收到以下错误消息。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|564751|564752|调试配置中的Python路径无效。|blockquote|564753|564754|564755|当我在屏幕左侧的“Explorer”选项卡中打开一个文件夹时，问题自行解决了。不知道为什么会起作用或者是否真的是问题所在.也许它会对某人有帮助。|564756|entityMap^0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|M|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|N|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|O|8|@]|9|@]|A|$]]|$1|G|3|-4|5|6|7|P|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|Q|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|R|8|@]|9|@]|A|$]]]|K|$]]

I had a similar problem in VScode today. I was getting the following error message every time I tried to run a script.
<blockquote>
The Python path in your debug configuration is invalid.
</blockquote>
The problem resolved itself when I opened a folder in the 'Explorer' tab on the left hand side of the screen. Not sure why this worked or if it was actually the problem ... maybe it will help someone.

Very new to Python and VSCode (and stackoverflow). I've been using both for about 3 months now just fine, up until recently that is.
When trying to run any basic Python program in the debugger, the popup <code>The Python path in your debug configuration is invalid. Source: Python(Extension)</code> appears and the debugger won't run. I go to my <code>launch.json</code> file and sure enough, I have the path to where Python is set up.
{
<pre><code>&quot;version&quot;: &quot;0.2.0&quot;,
&quot;configurations&quot;: [
 {
 &quot;name&quot;: &quot;Python: Current File&quot;,
 &quot;type&quot;: &quot;python&quot;,
 &quot;request&quot;: &quot;launch&quot;,
 &quot;program&quot;: &quot;${file}&quot;,
 &quot;console&quot;: &quot;integratedTerminal&quot;,
 &quot;python&quot;: &quot;${command:python.interpreterPath}&quot;
 }
]
</code></pre>
}
Messing with <code>settings.json</code> doesn't help anything either because I do have the path to Python set up, but the debugger still won't run. I am at a loss what to do here. I have never gone into my .json files in the past before, nor have I ever had to configure my Python path after installing VSCode for the first time.

VSCode: The Python path in your debug configuration is invalid

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

教程

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云智能顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

聚焦“写作效率、视觉美观与运行性能”三方面进行全面升级，为您提供更高效、稳定的创作环境

社区富文本&Markdown编辑器全新改版上线，欢迎大家体验!

诚挚邀请您参与本次调研，分享您的真实使用感受与建议。您的反馈至关重要，感谢您的支持与参与！

社区新版编辑器体验调研

非常新的Python和VSCode (和堆栈溢出)。我已经使用了大约3个月，现在还不错，直到最近，也就是。当尝试在调试器中运行任何基本Python程序时，会出现弹出的The Python path in your debug configuration is invalid. Source: Python(Extension)，并且调试器不会运行。我会转到我的launch.json文件，当然，我已

问VSCode:调试配置中的Python无效
EN

回答 8

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问VSCode:调试配置中的Python无效EN

回答 8

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问VSCode:调试配置中的Python无效
EN