blocks|key|749484|text|我下载了NUnit+2.5源代码，并在VS2010测试版中打开了VS2008解决方案。转换完成后，我打开所有项目并将所有项目的目标框架设置更改为".NET+Framework4.0“。然后，我构建了解决方案，没有任何错误。现在我可以使用NUnit+GUI应用程序来运行为.NET+4.0构建的测试。我还没有对这个构建做过详尽的测试，所以可能会出现问题，但就我的目的而言，它工作得很好。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|749485|更新:没有必要重新构建NUnit。我发现，如果将以下内容添加到相关的NUnit配置文件中，则可以运行为.NET+4.0构建的测试dll。|749486|在添加项下：|749487|<startup>
++<supportedRuntime+version="v4.0.30319"+/>
</startup>|code-block|syntax|javascript|749488|并在添加项下：|749489|<loadFromRemoteSources+enabled="true"+/>|749490|entityMap^0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|R|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|S|8|@]|9|@]|A|$]]|$1|F|3|G|5|H|7|T|8|@]|9|@]|A|$I|J]]|$1|K|3|L|5|6|7|U|8|@]|9|@]|A|$]]|$1|M|3|N|5|H|7|V|8|@]|9|@]|A|$I|J]]|$1|O|3|-4|5|6|7|W|8|@]|9|@]|A|$]]]|P|$]]

I've downloaded the NUnit 2.5 source and opened the VS2008 solution in the VS2010 beta. Once the conversion finished I opened all the projects and changed the target framework setting for all the projects to ".NET Framework 4.0". I then built the solution without any errors. I can now use the NUnit GUI app to run tests built for .NET 4.0. I've not done exhaustive testing of this build so there may be problems, but for my purposes it works fine.

Update: It is not necessary to rebuild NUnit. I discovered that if you add the following to the relevant NUnit config file you can run a test dll built for .NET 4.0.

Under &lt;configuration> add:

<pre><code>&lt;startup&gt;
 &lt;supportedRuntime version="v4.0.30319" /&gt;
&lt;/startup&gt;
</code></pre>

and under &lt;runtime> add:

<pre><code>&lt;loadFromRemoteSources enabled="true" /&gt;
</code></pre>

blocks|key|2273779|text|随着.NET+4的发布，我使用了|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2273780|<supportedRuntime+version="v4.0.30319"+/>|code-block|syntax|javascript|2273781|在NUnit+2.5.4+exe.config中，而不是requiredRuntime中，以及上面所示的loadFromRemoteResources标记中，所有这些都运行得很好。谢谢!|2273782|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

With .NET 4 being released, I used

<pre><code>&lt;supportedRuntime version="v4.0.30319" /&gt;
</code></pre>

in the NUnit 2.5.4 exe.config instead of requiredRuntime, and the loadFromRemoteResources tag as shown above and all worked well. Thanks!

blocks|key|2273983|text|你不需要修改任何文件|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2273984|只要打开这个文件，一切都会正常的。|2273985|程序文件(+2.5.10\bin\net-2.0\nunit-x86.exe+)\NUnit+2.5.10\bin\net-2.0\nunit-x86.exe|2273986|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|H|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|I|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|J|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|G|$]]

You don't have to modify any file

just open this file and everything will work just fine

C:\Program Files (x86)\NUnit 2.5.10\bin\net-2.0\nunit-x86.exe

blocks|key|2273848|text|在/framework=net-4.0中，您可以在命令行中指定选项NUnit+2.5.5，它与最新VS2010发布时生成的新程序集兼容。|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|2273849|entityMap|0|LINK|mutability|MUTABLE|url|http://nunit.org/index.php?p=releaseNotes&r=2.5.5^0|1|I|X|B|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@$9|O|A|P|B|C]]|D|@$9|Q|A|R|1|S]]|E|$]]|$1|F|3|-4|5|6|7|T|8|@]|D|@]|E|$]]]|G|$H|$5|I|J|K|E|$L|M]]]]

In <a href="http://nunit.org/index.php?p=releaseNotes&amp;r=2.5.5" rel="noreferrer">NUnit 2.5.5</a> you can specify in the command line the option /framework=net-4.0 and it is compatible with the new assemblies generated with the release of the latest VS2010.

blocks|key|749536|text|建议的解决方案对于让NUnit运行非常有效。不幸的是，当我进入代码覆盖步骤时，NCover开始给我：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|749537|Profiled过程终止。未建立分析器连接。|blockquote|749538|我找到的最好的解决方案就是在-x86中使用NUnit的“NCover”版本：|749539|NCover.Console.exe+nunit-控制台-x86.exe-附加params--|749540|现在起作用了。|749541|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|N|8|@]|9|@]|A|$]]|$1|E|3|F|5|6|7|O|8|@]|9|@]|A|$]]|$1|G|3|H|5|D|7|P|8|@]|9|@]|A|$]]|$1|I|3|J|5|6|7|Q|8|@]|9|@]|A|$]]|$1|K|3|-4|5|6|7|R|8|@]|9|@]|A|$]]]|L|$]]

The proposed solution worked great for getting NUnit to run. Unfortunately, when I then got to my code coverage step, NCover started giving me:

<blockquote>
 Profiled process terminated. Profiler
 connection not established.
</blockquote>

The best solution I found to this was to just use the "-x86" version of NUnit with NCover:

<blockquote>
 NCover.Console.exe
 nunit-console-x86.exe --additional params--
</blockquote>

Works now.

blocks|key|906525|text|若要从VisualVISUAL2010Express中查找.net+4版本，或从菜单的帮助项下找到该C#应用程序的“关于”版本，请执行以下操作。它应该显示为微软.NET框架线下的窗口右上半部的版本。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|906526|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

To find your .net 4 version from the Visual [C# 2010 Express, or which ever] go to the Visual application's "About" under the menu's Help item. It should show up as the version under the Microsoft .NET Framework line on the top right hand side of the window.

blocks|key|2273884|text|在运行NUnit+2.4.8时，我遇到了相同的错误消息。由于我已经有一段时间没有升级，所以我安装了当前的NUnit+(v2.5.9)，发现它现在支持VS2010程序集。因此，如果您最近遇到了这个错误，请检查您的NUnit版本:截至2010年12月(大约)，您需要做的仅限于的事情是升级NUnit。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2273885|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I ran into the very same error message while running NUnit 2.4.8. As I had not upgraded in some time I installed the current NUnit (v2.5.9) and found that it now supports VS2010 assemblies. So if you have newly encountered this error check your NUnit version: as of December 2010 (or so) the only thing you need to do is upgrade NUnit.

blocks|key|749709|text|从NUnit+2.5.10开始，您可以在GUI运行程序中启用visual支持：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|749710|工具->设置->+IDE支持|blockquote|749711|之后，我成功地连接到nunit-agent.exe进程，它在.NET+4.0应用程序域中运行您的程序集。|749712|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$]]|$1|E|3|F|5|6|7|K|8|@]|9|@]|A|$]]|$1|G|3|-4|5|6|7|L|8|@]|9|@]|A|$]]]|H|$]]

As of NUnit 2.5.10 you can enable visual studio support in the GUI runner: 

<blockquote>
 Tools-> Settings-> IDE Support
</blockquote>

After that I was able to successfully attach to the nunit-agent.exe process which runs your assembly in a .NET 4.0 app domain

blocks|key|749615|text|如果您在升级到nunit+2.5.5之后遇到了这个问题，那么您将需要将nant升级到我的最新版本--它是.91+alpha。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|749616|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

If you experience this issue after upgrading to nunit 2.5.5 then you will need to upgrade nant to the latest version for me it was .91 alpha.

blocks|key|749674|text|I+找到有用从NUnit应用程序模板开始。它支持VS+C#+Express，允许调试测试，并包含用于.NET+4.0的预编译NUnit。感谢作者的新测试项目准备一次点击。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|749675|entityMap|0|LINK|mutability|MUTABLE|url|http://www.csharpblog.co.cc/2011/05/integrate-nunit-with-visual-studio.html|1|http://visualstudiogallery.msdn.microsoft.com/b8a7a8fa-9f5a-4b9b-8e8b-8839a4364f26^0|2|2|0|G|2|1|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@$A|O|B|P|1|Q]|$A|R|B|S|1|T]]|C|$]]|$1|D|3|-4|5|6|7|U|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]|L|$5|G|H|I|C|$J|M]]]]

I <a href="http://www.csharpblog.co.cc/2011/05/integrate-nunit-with-visual-studio.html" rel="nofollow">found</a> usefull to start from NUnit Application <a href="http://visualstudiogallery.msdn.microsoft.com/b8a7a8fa-9f5a-4b9b-8e8b-8839a4364f26" rel="nofollow">Template</a>. It support VS C# Express, allows debugging tests and contains precompiled NUnit for .NET 4.0. Thank to author new test project gets ready with one click.

I'm trying to load a Visual Studio 2010 beta dll into the NUnit GUI. I get a popup error.

<blockquote>
 This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded. You may be attempting to load an assembly build with a later version of the CLR than the version under which NUnit is currently running.
</blockquote>

How do I force an executable to run under .NET 4?

NUnit isn't running Visual Studio 2010 code

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

我正在尝试将VisualStudio2010BetaDLL加载到NUnit GUI中。我收到一个弹出错误。此程序集是由比当前加载的运行时更新的运行时生成的，无法加载。您可能试图使用比当前运行NUnit的版本更晚的CLR版本加载程序集生成。如何强制可执行文件在.NET 4下运行？

问NUnit没有运行Visual 2010代码
EN

回答 10

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问NUnit没有运行Visual 2010代码EN

回答 10

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问NUnit没有运行Visual 2010代码
EN