blocks|key|140921|text|正如我已经表达过的这里，你的股票安卓手机不能作为一个AT调制解调器。-甚至连一个串行连接都没有。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|140922|问:+PBX是如何控制的？它是否实现了类似于传真机(D)的“模拟”CSD调制解调器？|140923|如果是那样的话，你就会因为GSM/UMTS/.数据传输的工作方式完全不同。|140924|entityMap|0|LINK|mutability|MUTABLE|url|https://stackoverflow.com/questions/7905523/making-calls-through-android-phone-via-bluetooth-enabled-micro-controller/7908952#7908952^0|9|2|0|0|0|0^^$0|@$1|2|3|4|5|6|7|P|8|@]|9|@$A|Q|B|R|1|S]]|C|$]]|$1|D|3|E|5|6|7|T|8|@]|9|@]|C|$]]|$1|F|3|G|5|6|7|U|8|@]|9|@]|C|$]]|$1|H|3|-4|5|6|7|V|8|@]|9|@]|C|$]]]|I|$J|$5|K|L|M|C|$N|O]]]]

As I already expressed <a href="https://stackoverflow.com/questions/7905523/making-calls-through-android-phone-via-bluetooth-enabled-micro-controller/7908952#7908952">here</a>, your stock Android phone cannot be used as an AT modem. - There isn't even a serial connection built in.

Question: How is the PBX controlled anyway? Does it implement an "analog" CSD modem, like FAX machines use(d) to? 
In that case, you'd be completely out of luck since GSM/UMTS/... data transfer works quite differently.

blocks|key|140985|text|如果您使用SIP帐户进行传真，那么设置就不会那么困难了。我在家里安装了一个闪存交换机。在那里，我使用Hylafax通过SIP与我的SIP提供者进行通信。我想你可以用谷歌之声来做这个？|type|unstyled|depth|inlineStyleRanges|entityRanges|data|140986|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

It can not be that difficult to set up if you use a SIP account to fax. 
I have a PBX in a Flash installed at home. There I use Hylafax to communicate over SIP to my SIP provider. I guess you could use Google Voice for this?

blocks|key|2130139|text|在我看来，如果一个应用程序可以在呼叫期间保持活动状态，并在特定的时间内发送特定频率的音频，那么终端的代码就可以被翻译过来(如果你能得到源的话)。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2130140|不需要蓝牙或wifi或usb。|2130141|我来这里是为了找一个应用程序，让我把手机举到手机接收器上，接收传真，或者把耳机插座连接到RJ12手机插座上。|2130142|如果我发现什么有用的东西，我会尽量记得回来，并张贴在这里。|2130143|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|J|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|K|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|L|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|M|8|@]|9|@]|A|$]]|$1|H|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|I|$]]

It seems to me that if an app can be written to remain active during a call and send an audible tone of a specific frequency for a specific duration then the code for a terminal could be translated over (if you can get the source).

No need for bluetooth or wifi or usb.

I came here looking for an app to let me hold my phone up to a phone receiver to receive a fax or connect my headset outlet into an RJ12 phone outlet.

If I find anything useful I will try to remember to come back and post it here.

blocks|key|307624|text|使用蓝牙是可能的。大多数android手机(如果不是全部的话)都有蓝牙拨号服务，适合与微软的Windows传真工具一起使用。不过，我无法找到通过USB使用它的方法。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|307625|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

It is possible using bluetooth. Most android phones (if not all) have a bluetooth dial-up service, suitable for using with e.g. Microsoft Windows Fax tool. I could not find a way to use it via USB, though.

blocks|key|140311|text|有趣的问题，你想通过电话打电话来打电话吗？根据这个论坛的说法，除了获取手机的状态、信号强度和其他信息之外，控制手机的方法似乎很少。您可以使用浏览源来查看Android拨号程序本身的工作原理，但是如果您可以通过电话系统发送音频，您仍然需要通过usb或蓝牙实现协议，这可能需要一些api中没有的方法，但可能在NDK中可以使用。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|140312|entityMap|0|LINK|mutability|MUTABLE|url|http://androidcommunity.com/forums/f4/phone-listner-api-in-android-1015/index2.html|1|http://hi-android.info/src/|2|http://developer.android.com/sdk/ndk/overview.html^0|N|4|0|1Y|3|1|48|3|2|0^^$0|@$1|2|3|4|5|6|7|P|8|@]|9|@$A|Q|B|R|1|S]|$A|T|B|U|1|V]|$A|W|B|X|1|Y]]|C|$]]|$1|D|3|-4|5|6|7|Z|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]|L|$5|G|H|I|C|$J|M]]|N|$5|G|H|I|C|$J|O]]]]

Interesting question, you're trying to call through the phone to dial up? According to <a href="http://androidcommunity.com/forums/f4/phone-listner-api-in-android-1015/index2.html" rel="nofollow">this forum</a>, there seems to be few documented ways to control the phone other than getting phone's state and signal strength, and other info. You could <a href="http://hi-android.info/src/" rel="nofollow">browse the source</a> to see how Android dialer app itself works, but if you can send tones through the phone system you would still need to implement the protocol over usb or bluetooth, that would probably require some methods that aren't in the api, but perhaps may be available in the <a href="http://developer.android.com/sdk/ndk/overview.html" rel="nofollow">NDK</a>?

blocks|key|2130233|text|标准GSM呼叫的比特率约为13+kbit/秒。将模拟调制解调器信号转换为数字信号将导致分辨率的下降。因此，即使你这样做，你也很可能无法传输比1200波特调制解调器信号更快的信号。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2130234|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

The bit rate for standard GSM calls is about 13 kbits / second. Conversion of an analog modem signal to a digital signal will entail some loss of resolution. So even if you did this you probably would not be able to transmit anything faster than like a 1200 baud modem signal.

blocks|key|307734|text|定位usb驱动程序为您的手机，安装在电脑上，建立新的“拨号连接”在威瑞森电话#是#777用户是您的phone#密码是vzw。我住在没有选择的互联网，除了卫星和MiFi和100-250+/+mo不是一个有效的选择。所以我选择了这个方法。我所发现的最困难的部分是为手机定位驱动程序(调制解调器)，希望它能有所帮助。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|307735|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

locate usb driver for your phone,install on computer, set up new " dial up connection" on verizon phone # to dial is #777 user is your phone# password is vzw . i live where there is no options for internet except Sat and MiFi and at 100-250 / mo not a valid option. so i chose this method. the hardest part i have found is locating drivers (modem) for the phones hope it helps

With some older cell phones, you can connect them to a computer and use them as a Dialup/FAX modem (to connect to a dialup ISP for example). I have been trying to find out if this possible with Android, but all my searches end up with people looking to share their phones Internet connection with their PC. This is NOT what I'm looking to do. I'm wanting to use Hyper-terminal to have my phone place a call to a PBX, so I can make changes to the PBX remotely.

Android as Dialup/FAX Modem

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋 

腾讯云代码助手

CODING DevOps

Cloud Studio

SDK中心

API中心

命令行工具

使用一些旧的手机，您可以将它们连接到计算机，并将它们用作拨号/传真调制解调器(例如连接到拨号ISP )。我一直在试图找出这是否可能在Android，但我所有的搜索结果是人们希望分享他们的手机，互联网连接，他们的个人电脑。这是，而不是，我想做的是。我想使用超级终端让我的电话打电话给PBX，这样我就可以远程更改PBX了。

问Android作为拨号/传真调制解调器
EN

回答 7

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Android作为拨号/传真调制解调器EN

回答 7

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Android作为拨号/传真调制解调器
EN