blocks|key|2919375|text|可以使用'Position'属性控制图形的大小。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2919376|此属性要求格式为[fromX+fromY+width+height]的4元素向量，因此，通过更改width和height，您可以控制图形的大小。|2919377|例如|2919378|figure(+'Position',+[150+150+700+550]+)|code-block|syntax|javascript|2919379|打开一个宽度为700像素，高度为550像素的新图形。|2919380|entityMap^0|4|A|0|8|Q|1C|5|1I|6|0|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@$9|T|A|U|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|V|8|@$9|W|A|X|B|C]|$9|Y|A|Z|B|C]|$9|10|A|11|B|C]]|D|@]|E|$]]|$1|H|3|I|5|6|7|12|8|@]|D|@]|E|$]]|$1|J|3|K|5|L|7|13|8|@]|D|@]|E|$M|N]]|$1|O|3|P|5|6|7|14|8|@]|D|@]|E|$]]|$1|Q|3|-4|5|6|7|15|8|@]|D|@]|E|$]]]|R|$]]

You can control the size of a figure using <code>'Position'</code> property. 
This property expect a 4-element vector in the format <code>[fromX fromY width height]</code>, thus, by changing the <code>width</code> and <code>height</code> you can control the size of the figure.

For example

<pre><code>figure( 'Position', [150 150 700 550] )
</code></pre>

Opens a new figure with width of 700 pixels and height of 550 pixels.

blocks|key|3756697|text|啊，我们开始：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3756698|implay(Diff);
set(findall(0,'tag','spcui_scope_framework'),'position',[150+150+700+550]);|code-block|syntax|javascript|3756699|2012年工作b。(注意:如果您打开了多个植入窗口，这将使它们都设置为相同的大小)|3756700|所以你可以学习如何为自己找到这类东西，我所做的就是从一个没有其他打开窗口的工作区开始。|3756701|然后我使用implay(Diff)打开一个植入窗口。|offset|length|style|CODE|3756702|然后，我使用findall(0)查找0下面的所有图形/uicontrol句柄，这是根工作区。但是有太多了！其中大多数是implay窗口的子组件-菜单、按钮等。所以，我只需要第一个组件，它是由根工作区创建的。|3756703|为了得到这个结果，我使用了findall(0,'Parent',0);+-我也可以选择使用allchild(0);。|3756704|我给它分配了一个变量：ImplayHandle=findall(0,'Parent',0);|3756705|看看它的特性：|3756706|get(ImplayHandle);|3756707|通过这些，Tag似乎是窗口的标识符，'spcui_scope_framework'。我还注意到，Position属性的大小类似于图形窗口的大小，这是很有希望的。|3756708|因此，为了检查，我尝试了findall(0,'Tag','spcui_scope_framework');，并且能够看到只返回了一个句柄(没有一个子组件或菜单项也被标记为相同的标记，这是可能的)。|3756709|最后，我关闭了打开的窗口，然后再次使用implay(Diff);打开了一个新窗口。我使用set命令试图更改窗口大小：|3756710|set(findall(0,'tag','spcui_scope_framework'),'position',[150+150+700+550]);|3756711|看到窗户的大小确实改变了，就像所希望的那样。|3756712|entityMap^0|0|0|0|0|5|C|0|6|A|1N|6|0|D|M|19|C|0|B|Z|0|0|0|I|0|5|3|I|N|1C|8|0|C|15|0|J|D|18|3|0|0|23|0|0^^$0|@$1|2|3|4|5|6|7|1C|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|1D|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|1E|8|@]|9|@]|A|$]]|$1|I|3|J|5|6|7|1F|8|@]|9|@]|A|$]]|$1|K|3|L|5|6|7|1G|8|@$M|1H|N|1I|O|P]]|9|@]|A|$]]|$1|Q|3|R|5|6|7|1J|8|@$M|1K|N|1L|O|P]|$M|1M|N|1N|O|P]]|9|@]|A|$]]|$1|S|3|T|5|6|7|1O|8|@$M|1P|N|1Q|O|P]|$M|1R|N|1S|O|P]]|9|@]|A|$]]|$1|U|3|V|5|6|7|1T|8|@$M|1U|N|1V|O|P]]|9|@]|A|$]]|$1|W|3|X|5|6|7|1W|8|@]|9|@]|A|$]]|$1|Y|3|Z|5|6|7|1X|8|@$M|1Y|N|1Z|O|P]]|9|@]|A|$]]|$1|10|3|11|5|6|7|20|8|@$M|21|N|22|O|P]|$M|23|N|24|O|P]|$M|25|N|26|O|P]]|9|@]|A|$]]|$1|12|3|13|5|6|7|27|8|@$M|28|N|29|O|P]]|9|@]|A|$]]|$1|14|3|15|5|6|7|2A|8|@$M|2B|N|2C|O|P]|$M|2D|N|2E|O|P]]|9|@]|A|$]]|$1|16|3|17|5|6|7|2F|8|@$M|2G|N|2H|O|P]]|9|@]|A|$]]|$1|18|3|19|5|6|7|2I|8|@]|9|@]|A|$]]|$1|1A|3|-4|5|6|7|2J|8|@]|9|@]|A|$]]]|1B|$]]

Ah here we go:

<pre><code>implay(Diff);
set(findall(0,'tag','spcui_scope_framework'),'position',[150 150 700 550]);
</code></pre>

Works in 2012b.
(Note: if you have more than one implay window open, this will set them all to the same size)

So you can learn how to find this kind of stuff for yourself, what I did was start with a workspace with no other open windows.

I then used <code>implay(Diff)</code> to open an implay window.

I then used <code>findall(0)</code> to find all of the figure/uicontrol handles under 0, which is the root workspace. But there were too many! Most of them are the subcomponents of the <code>implay</code> window - the menus, buttons, etc. So, I only needed the first component which was created by the root workspace. 

To get this, I used <code>findall(0,'Parent',0);</code> - I could alternatively have used <code>allchild(0);</code>. 

I assigned a variable to this: <code>ImplayHandle=findall(0,'Parent',0);</code>

And looked at its properties:

<code>get(ImplayHandle);</code>

Looking through these, the <code>Tag</code> seemed to be an identifier of the window, <code>'spcui_scope_framework'</code>. I also noticed the <code>Position</code> property had a similar size to that of a figure window, which was promising.

So, to check, I tried <code>findall(0,'Tag','spcui_scope_framework');</code> and I was able to see that only a single handle was returned (none of the subcomponents or menu items were also labelled with the same Tag, which was a possibility).

Finally, I closed the open window, then opened a new window using <code>implay(Diff);</code> again. I used the <code>set</code> command to try to change the window size:

<code>set(findall(0,'tag','spcui_scope_framework'),'position',[150 150 700 550]);</code> 

And saw that the window size had indeed changed, as hoped.

blocks|key|2919448|text|handle+=+implay(movie);
handle.Parent.Position+=+[100+100+700+550];|type|code-block|depth|inlineStyleRanges|entityRanges|data|syntax|javascript|2919449|如果您想设置窗口大小，也可以使用。|unstyled|2919450|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$B|C]]|$1|D|3|E|5|F|7|J|8|@]|9|@]|A|$]]|$1|G|3|-4|5|F|7|K|8|@]|9|@]|A|$]]]|H|$]]

<pre><code>handle = implay(movie);
handle.Parent.Position = [100 100 700 550];
</code></pre>

Also works if you want to set window size.

blocks|key|299236|text|如果一个人想要最大化窗口，下面的代码为我工作(windows10，matlab+R2020b)。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|299237|handle+=+implay('Path+of+the+movie');
handle.Parent.WindowState=+'maximized'+;|code-block|syntax|javascript|299238|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

If one want to maximize the window, the following code works for me (windows10, matlab R2020b).
<pre><code>handle = implay('Path of the movie');
handle.Parent.WindowState= 'maximized' ;
</code></pre>

I am using implay to play some frames i want, the thing is that window size that pops is a bit small,so the user must maximize it by himself, is there any way to control the size of the window that pops up?

Matlab - implay's default size window

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

我正在使用执行来播放我想要的一些帧，问题是弹出窗口的大小有点小，所以用户必须自己最大化它，有什么方法可以控制弹出窗口的大小吗？

问的默认大小窗口
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问的默认大小窗口EN