blocks|key|630174|text|你在用像uglify这样的过滤器吗？|type|unstyled|depth|inlineStyleRanges|entityRanges|data|630175|如果是这种情况，Assetic将引发此错误，因为代码127中存在该进程，这意味着节点可执行文件无法运行。|630176|检查config.yml中的路径：|offset|length|style|CODE|630177|#+app/config/config.yml
assetic:
++++filters:
++++++++uglifyjs2:
++++++++++++bin:+/path/to/uglifyjs|code-block|syntax|javascript|630178|确保它是可执行的：|630179|chmod+%2Bx+/path/to/uglifyjs|630180|entityMap^0|0|0|2|A|0|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|V|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|W|8|@$F|X|G|Y|H|I]]|9|@]|A|$]]|$1|J|3|K|5|L|7|Z|8|@]|9|@]|A|$M|N]]|$1|O|3|P|5|6|7|10|8|@]|9|@]|A|$]]|$1|Q|3|R|5|L|7|11|8|@]|9|@]|A|$M|N]]|$1|S|3|-4|5|6|7|12|8|@]|9|@]|A|$]]]|T|$]]

Are you using some filters like uglify ?

If this is the case, Assetic raises this error because the process exists with code 127, which means the node executable was unable to run.

Check the path in your <code>config.yml</code> :

<pre><code># app/config/config.yml
assetic:
 filters:
 uglifyjs2:
 bin: /path/to/uglifyjs
</code></pre>

And make sure it is executable :

<pre><code>chmod +x /path/to/uglifyjs
</code></pre>

blocks|key|1350162|text|只需进行编写器更新(php+composer.phar更新)，然后尝试转储您的资产。它可能第一次不能工作，所以再次更新composer。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1350163|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Just make a composer update (php composer.phar update) then try dumping your assets.
It may not work the first time, so update composer again.

blocks|key|1629375|text|首先，确保已安装节点，并找到节点的路径。您通常可以通过使用which+node找到这一点，它将返回类似于/usr/local/bin/node的内容。如果它返回类似于/usr/bin/which:+no+node+in+...的内容，则需要安装节点。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1629376|下一步配置symfony。打开config.yml+(./app/+config+/config.yml)和指向assetic的节点路径，即：|1629377|#+app/config/config.yml
assetic:
++++node:+/usr/local/bin/node|code-block|syntax|javascript|1629378|entityMap^0|T|A|1G|J|2B|U|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@$9|P|A|Q|B|C]|$9|R|A|S|B|C]|$9|T|A|U|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|V|8|@]|D|@]|E|$]]|$1|H|3|I|5|J|7|W|8|@]|D|@]|E|$K|L]]|$1|M|3|-4|5|6|7|X|8|@]|D|@]|E|$]]]|N|$]]

First make sure you have node installed and find the path to node. You can usually find this by using <code>which node</code> which will return something like <code>/usr/local/bin/node</code>. If it returns something like <code>/usr/bin/which: no node in ...</code> you need to install node.

Next configure symfony. Open your config.yml (./app/config/config.yml) and the path to node to you assetic config, i.e.:

<pre><code># app/config/config.yml
assetic:
 node: /usr/local/bin/node
</code></pre>

blocks|key|630243|text|这对我来说很管用|type|unstyled|depth|inlineStyleRanges|entityRanges|data|630244|sudo+apt-get+remove+nodejs
sudo+apt-get+remove+npm

sudo+curl+-sL+https://deb.nodesource.com/setup+%7C+sudo+bash+-

sudo+apt-get+install+nodejs|code-block|syntax|javascript|630245|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

This worked for me

<pre><code>sudo apt-get remove nodejs
sudo apt-get remove npm

sudo curl -sL https://deb.nodesource.com/setup | sudo bash -

sudo apt-get install nodejs
</code></pre>

blocks|key|1350295|text|我在执行以下操作时添加相同的错误|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1350296|php+app/console+assetic:dump+--env=prod|code-block|syntax|javascript|1350297|Ubuntu上的在节点和nodejs二进制文件之间存在混淆。要解决这个问题，需要安装节点二进制文件。在我的例子中，二进制是nodejs，所以它不起作用。|offset|length|style|BOLD|1350298|在Ubuntu上，命令which+node将告诉您是否安装了节点。尝试which+node，如果它不起作用，尝试which+nodejs。|CODE|1350299|因此，为了确保我没有混淆，我做到了：|1350300|++++sudo+apt-get+remove+nodejs
++++curl+-sL+https://deb.nodesource.com/setup_4.x+%7C+sudo+-E+bash+-
++++sudo+apt-get+install+-y+nodejs|1350301|检查节点网站是否有正确的curl命令中的url。您可能需要节点5.X。|1350302|现在当你做了|1350303|which+node
/usr/bin/node|1350304|您有正确的二进制名称(节点而不是nodejs)。|1350305|在这之后，它就能工作了。如果不检查config.yml中的节点路径(请检查config_prod和config_dev中没有其他声明)|1350306|entityMap|0|LINK|mutability|MUTABLE|url|https://nodejs.org/en/^0|0|0|8|1W|0|0|1X|B|A|Z|A|1K|C|0|0|I|0|0|0|Z|2|4|0|0|0|6|0|0|0|O|0|0|1V|0^^$0|@$1|2|3|4|5|6|7|1B|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|1C|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|1D|8|@$I|1E|J|1F|K|L]]|9|@]|A|$]]|$1|M|3|N|5|6|7|1G|8|@$I|1H|J|1I|K|L]|$I|1J|J|1K|K|O]|$I|1L|J|1M|K|O]|$I|1N|J|1O|K|O]]|9|@]|A|$]]|$1|P|3|Q|5|6|7|1P|8|@$I|1Q|J|1R|K|L]]|9|@]|A|$]]|$1|R|3|S|5|D|7|1S|8|@]|9|@]|A|$E|F]]|$1|T|3|U|5|6|7|1T|8|@$I|1U|J|1V|K|L]]|9|@$I|1W|J|1X|1|1Y]]|A|$]]|$1|V|3|W|5|6|7|1Z|8|@$I|20|J|21|K|L]]|9|@]|A|$]]|$1|X|3|Y|5|D|7|22|8|@]|9|@]|A|$E|F]]|$1|Z|3|10|5|6|7|23|8|@$I|24|J|25|K|L]]|9|@]|A|$]]|$1|11|3|12|5|6|7|26|8|@$I|27|J|28|K|L]]|9|@]|A|$]]|$1|13|3|-4|5|6|7|29|8|@]|9|@]|A|$]]]|14|$15|$5|16|17|18|A|$19|1A]]]]

I add the exact same error while doing 

<pre><code>php app/console assetic:dump --env=prod
</code></pre>

On Ubuntu there is a confusion between node and nodejs binary.
To solve this you need to install node binary.
In my case the binary was nodejs, so it didn't work.

On Ubuntu the command <code>which node</code> will tell you if node is instaled.
Try <code>which node</code> and if it doesn't work try <code>which nodejs</code>.

So to be sure there is no confusion I did :

<pre><code> sudo apt-get remove nodejs
 curl -sL https://deb.nodesource.com/setup_4.x | sudo -E bash -
 sudo apt-get install -y nodejs
</code></pre>

Check on <a href="https://nodejs.org/en/" rel="nofollow noreferrer">node website</a> for the correct url in the curl command. You might want node 5.X.

Now when you do 

<pre><code>which node
/usr/bin/node
</code></pre>

You have the correct binary name (node instead of nodejs).

After this it should work. If not check the node path in config.yml (check that there is no other declaration in config_prod and config_dev )

blocks|key|1350333|text|我发现，即使在您的/usr/bin/node中指定了config.yml，您仍然可能会发现assetic正在尝试使用/usr/local/bin/node。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1350334|解决这个问题的快速和肮脏的方法是：|1350335|ln+-sf+/usr/bin/node+/usr/local/bin/node|code-block|syntax|javascript|1350336|如果您有疑问，请临时编辑vendor/kriswallsmith/assetic/src/Assetic/Filter/UglifyJs2Filter.php|1350337|在第136行附近编辑：|1350338|++++++++if+(127+===+$code)+{
++++++++++++throw+new+\RuntimeException('Path+to+node+executable+could+not+be+resolved.');
++++++++}+|1350339|->|1350340|++++++++if+(127+===+$code)+{
++++++++++++throw+new+\RuntimeException('Path+to+node+executable+could+not+be+resolved.'+.+$this->nodeBin);
++++++++}|1350341|这将告诉您assetic希望下次assetic失败时节点在哪里。|1350342|我发现在我的设置中，assetic被配置为在dev模式下查找dev，而/usr/bin在prod模式下。因此，值得检查config.yml、config_dev.yml和config_prod.yml。|1350343|entityMap^0|9|D|Q|A|1M|J|0|0|0|C|1V|0|0|0|0|0|0|M|3|U|3|Z|8|1N|A|1Y|E|2D|F|0^^$0|@$1|2|3|4|5|6|7|12|8|@$9|13|A|14|B|C]|$9|15|A|16|B|C]|$9|17|A|18|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|19|8|@]|D|@]|E|$]]|$1|H|3|I|5|J|7|1A|8|@]|D|@]|E|$K|L]]|$1|M|3|N|5|6|7|1B|8|@$9|1C|A|1D|B|C]]|D|@]|E|$]]|$1|O|3|P|5|6|7|1E|8|@]|D|@]|E|$]]|$1|Q|3|R|5|J|7|1F|8|@]|D|@]|E|$K|L]]|$1|S|3|T|5|6|7|1G|8|@]|D|@]|E|$]]|$1|U|3|V|5|J|7|1H|8|@]|D|@]|E|$K|L]]|$1|W|3|X|5|6|7|1I|8|@]|D|@]|E|$]]|$1|Y|3|Z|5|6|7|1J|8|@$9|1K|A|1L|B|C]|$9|1M|A|1N|B|C]|$9|1O|A|1P|B|C]|$9|1Q|A|1R|B|C]|$9|1S|A|1T|B|C]|$9|1U|A|1V|B|C]]|D|@]|E|$]]|$1|10|3|-4|5|6|7|1W|8|@]|D|@]|E|$]]]|11|$]]

I've found that even if you specify <code>/usr/bin/node</code> in your <code>config.yml</code> you might still find assetic is trying to use <code>/usr/local/bin/node</code>.

The quick and dirty way to fix this is:

<pre><code>ln -sf /usr/bin/node /usr/local/bin/node
</code></pre>

If you are in doubt, temporarily edit <code>vendor/kriswallsmith/assetic/src/Assetic/Filter/UglifyJs2Filter.php</code>

Edit near line 136:

<pre><code> if (127 === $code) {
 throw new \RuntimeException('Path to node executable could not be resolved.');
 } 
</code></pre>

->

<pre><code> if (127 === $code) {
 throw new \RuntimeException('Path to node executable could not be resolved.' . $this-&gt;nodeBin);
 }
</code></pre>

This will tell you where assetic expects node to be next time assetic fails.

I found in my set up assetic was configured to look to <code>/usr/local/bin</code> in <code>dev</code> mode but <code>/usr/bin</code> in prod mode.
So it's worth checking <code>config.yml</code>, <code>config_dev.yml</code> and <code>config_prod.yml</code>.

When running app/console assetic:dump, I am getting:

<blockquote>
 Path to node executable could not be resolved
</blockquote>

What does it mean and how to fix this?

When trying to browse project via app_dev.php, I am getting an HTTP 500 errors when browser tries to download css and js files.

Symfony2 Assetic: Path to node executable could not be resolved

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋 

腾讯云代码助手

CODING DevOps

Cloud Studio

SDK中心

API中心

命令行工具

当运行app/console assetic:dump时，我得到：无法解析节点可执行文件的路径这意味着什么以及如何解决这个问题？当试图通过app_dev.php浏览项目时，当浏览器试图下载css和js文件时，我会收到一个HTTP500个错误。

问Symfony2 Assetic:无法解析节点可执行文件的路径
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Symfony2 Assetic:无法解析节点可执行文件的路径EN