blocks|key|4248161|text|只需按CTRL%2BC+(在大多数unix中)|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|4248162|entityMap^0|3|6|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|K|8|@]|D|@]|E|$]]]|G|$]]

Simply press <code>CTRL+C</code> (in most unix shells)

blocks|key|3855575|text|这可能是因为ios-deploy的早期版本，因为它被描述为here。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|3855576|查看您的ios-deploy版本，我的版本是1.0.8：|3855577|$+ios-deploy+--version|code-block|syntax|javascript|3855578|查看npm版本的ios-deploy，当前为1.1.0：|3855579|$+npm+info+ios-deploy+version|3855580|更新ios-通过npm部署：|3855581|$+sudo+npm+update+-g+ios-deploy|3855582|在$+cordova+run之后，您现在可以键入exit并按ENTER键。在此之后，键入y并按ENTER退出进程。|3855583|entityMap|0|LINK|mutability|MUTABLE|url|https://github.com/phonegap/ios-deploy/issues/38^0|6|A|T|4|0|0|0|0|0|0|0|0|1|D|O|4|18|1|0^^$0|@$1|2|3|4|5|6|7|14|8|@$9|15|A|16|B|C]]|D|@$9|17|A|18|1|19]]|E|$]]|$1|F|3|G|5|6|7|1A|8|@]|D|@]|E|$]]|$1|H|3|I|5|J|7|1B|8|@]|D|@]|E|$K|L]]|$1|M|3|N|5|6|7|1C|8|@]|D|@]|E|$]]|$1|O|3|P|5|J|7|1D|8|@]|D|@]|E|$K|L]]|$1|Q|3|R|5|6|7|1E|8|@]|D|@]|E|$]]|$1|S|3|T|5|J|7|1F|8|@]|D|@]|E|$K|L]]|$1|U|3|V|5|6|7|1G|8|@$9|1H|A|1I|B|C]|$9|1J|A|1K|B|C]|$9|1L|A|1M|B|C]]|D|@]|E|$]]|$1|W|3|-4|5|6|7|1N|8|@]|D|@]|E|$]]]|X|$Y|$5|Z|10|11|E|$12|13]]]]

It is probably because of an earlier version of <code>ios-deploy</code>, as it is described <a href="https://github.com/phonegap/ios-deploy/issues/38">here</a>.

Check your version of ios-deploy, mine was 1.0.8:

<pre><code>$ ios-deploy --version
</code></pre>

Check npm version of ios-deploy, current is 1.1.0:

<pre><code>$ npm info ios-deploy version
</code></pre>

Update ios-deploy via npm:

<pre><code>$ sudo npm update -g ios-deploy
</code></pre>

After <code>$ cordova run</code> you can now type <code>exit</code> and press ENTER. After this, type <code>y</code> and press ENTER to exit the process.

blocks|key|3558925|text|如果在调试阶段之后使用Ctrl，但在它写(lldb)之前，它将退出.|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3558926|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

If you use Ctrl-C after the debug phase but before it says (lldb) it will exit...

blocks|key|3855631|text|如果使用cordova+cli构建项目，Xcode不应该运行。这很有可能解决你的问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3855632|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Xcode shouldn't be running if you are building your project using cordova cli. This will most likely solve your problem.

blocks|key|4248251|text|在尝试了许多不同的建议之后，唯一对我有效的是打开另一个终端窗口，当您完成调试运行时：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4248252|pkill+lldb|offset|length|style|CODE|4248253|这将关闭手机上的应用程序，并将原始终端窗口整齐地返回命令提示符。|4248254|entityMap^0|0|0|A|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|M|8|@$D|N|E|O|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|P|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|K|$]]

Having tried lots of different suggestions, the only thing that's worked for me is having another terminal window open, and when you're finished with the debugging run:

<code>pkill lldb</code>

That will close the app on the phone, and also return the original terminal window the command prompt neatly.

blocks|key|4248265|text|在我的例子中，这取决于我运行应用程序的方式。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4248266|如果我使用phonegap+run+ios运行应用程序，我必须按Ctrl+%2B+C；但是如果我使用cordova+run+ios运行，我也可以退出lldb中的输入quit或exit+(在应用程序运行之后)，然后按Y。|offset|length|style|CODE|4248267|附带注意:当我退出按下Ctrl+%2B+C，然后拔下我的设备并删除应用程序后，再次插入我的设备后，lldb将尝试再次安装该应用程序，而无需询问。当我退出输入exit时不会发生这种情况。|4248268|entityMap^0|0|5|G|W|8|1C|F|20|4|28|4|2D|4|2X|1|0|B|8|1B|4|24|4|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|M|8|@$D|N|E|O|F|G]|$D|P|E|Q|F|G]|$D|R|E|S|F|G]|$D|T|E|U|F|G]|$D|V|E|W|F|G]|$D|X|E|Y|F|G]|$D|Z|E|10|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|11|8|@$D|12|E|13|F|G]|$D|14|E|15|F|G]|$D|16|E|17|F|G]]|9|@]|A|$]]|$1|J|3|-4|5|6|7|18|8|@]|9|@]|A|$]]]|K|$]]

In my case, that depends on the way I run the app. 

If I run the app using <code>phonegap run ios</code>, I must press <code>Ctrl + C</code>; but if I run using <code>cordova run ios</code>, I can also exit typing <code>quit</code> or <code>exit</code> in <code>lldb</code> (after the app runs), and then press <code>Y</code>.

As a side note: When I exit pressing <code>Ctrl + C</code>, and then unplug my device and delete the app, after plug my device again <code>lldb</code> attempt to install the app again, without asking. That does not happen when I exit typing <code>exit</code>.

blocks|key|3559009|text|如果在Mac上使用终端，可以使用Command+%2B+C。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|3559010|entityMap^0|G|B|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|K|8|@]|D|@]|E|$]]]|G|$]]

You can use <code>Command + C</code> if you're using terminal on Mac.

blocks|key|3855710|text|在运行ionic+cordova+run+browser时，我也遇到了类似的问题。推送CTRL-C刚刚扼杀了终端进程，但是服务器在后台运行。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|3855711|我在mac上的解决方案是进入名为node的活动监视和终止进程。|3855712|entityMap^0|3|P|17|6|0|G|4|0^^$0|@$1|2|3|4|5|6|7|J|8|@$9|K|A|L|B|C]|$9|M|A|N|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|O|8|@$9|P|A|Q|B|C]]|D|@]|E|$]]|$1|H|3|-4|5|6|7|R|8|@]|D|@]|E|$]]]|I|$]]

I had a similar problem when running <code>ionic cordova run browser</code>. pushing <code>CTRL-C</code> just killed the terminal process but server was running in the background.

My solution on the mac was to go to activity monitor and kill process called <code>node</code>.

What is the command to stop running after using <code>cordova run ios</code> in terminal?

I found one topic about this with 1 answer saying it's <code>quit</code> but that didn't work. 
Right now I close terminal every time which is very time consuming.

If i press ctrl+c I get the following:

<blockquote>
 (lldb) ^CTraceback (most recent call last): File
 "/private/tmp/fruitstrap_.py", line 17, in connect_command
 event = lldb.SBEvent() File "/Applications/Xcode.app/Contents/SharedFrameworks/LLDB.framework/Versions/A/Resources/Python/lldb/init.py",
 line 3395, in init
 this = _lldb.new_SBEvent(*args) KeyboardInterrupt error: the platform is not currently connected Executing commands in
 '/tmp/fruitstrap-lldb-prep-cmds-'. (lldb) platform select
 remote-ios --sysroot '/Users/doekewartena/Library/Developer/Xcode/iOS
 DeviceSupport/7.1.2 (11D257)/Symbols' Platform: remote-ios 
 Connected: no SDK Path:
 "/Users/doekewartena/Library/Developer/Xcode/iOS DeviceSupport/7.1.2
 (11D257)/Symbols" (lldb) target create
 "/Users/doekewartena/Documents/jbc2014/platforms/ios/build/device/JBC2014.app"
 Current executable set to
 '/Users/doekewartena/Documents/jbc2014/platforms/ios/build/device/JBC2014.app'
 (armv7). (lldb) script
 fruitstrap_device_app="/private/var/mobile/Applications/E23498AF-29C5-4A9F-8AFB-6566631DB725/JBC2014.app"
 (lldb) script fruitstrap_connect_url="connect://127.0.0.1:12345"
 (lldb) command script import "/tmp/fruitstrap_.py" (lldb) 
 command script add -f fruitstrap_.connect_command connect (lldb) 
 command script add -s asynchronous -f fruitstrap_.run_command run
 (lldb) command script add -s asynchronous -f
 fruitstrap_.autoexit_command autoexit (lldb) connect (lldb) 
 run
</blockquote>

how to stop after "cordova run ios"

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

在终端中使用cordova run ios之后，停止运行的命令是什么？我找到了一个关于这个的话题，有一个回答说是quit，但这不起作用。现在我每次关闭终点站都很费时。如果按ctrl+c键，就会得到以下信息：(lldb) ^CTraceback (最近一次调用)：connect_command事件= lldb.SBEve...

问如何在"cordova运行ios“之后停止
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何在"cordova运行ios“之后停止EN