blocks|key|1825663|text|更改您的防火墙，允许它在您公开的端口上进行TCP连接(例如。(本例中为5000+)。|type|ordered-list-item|depth|inlineStyleRanges|entityRanges|data|1825664|你的机器会有一个机器名。因此，您可以使用http://:5000/从另一台计算机访问该网站。|offset|length|1825665|注意，只有当另一台机器也在同一个LAN网络中时，您才能访问该机器。只需使用"ping“快速查看这两台机器是否位于同一网络中。|unstyled|1825666|entityMap|0|LINK|mutability|MUTABLE|url|http://:5000/^0|0|K|D|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|R|8|@]|9|@$D|S|E|T|1|U]]|A|$]]|$1|F|3|G|5|H|7|V|8|@]|9|@]|A|$]]|$1|I|3|-4|5|H|7|W|8|@]|9|@]|A|$]]]|J|$K|$5|L|M|N|A|$O|P]]]]

<ol>
<li>Make change in your firewall to allow it TCP connections on the port you expose (eg. 5000 in this case).</li>
<li>Your machine will have a machine name. So you can access the website from another machine using http://:5000/</li>
</ol>

Note that, you can access the machine only if the other machine is also in the same LAN network. Just use "ping " to quickly see if both the machines are in the same network.

blocks|key|1825694|text|我有同样的问题，试图自我主机，并只能访问本地。我查看了“愤怒的IP扫描仪”(+Angry+)，发现当应用程序运行时，端口甚至都没有打开，这显然会阻止远程访问。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1825695|最后，我意识到--server.urls命令基本上必须像IIS中的绑定一样工作，所以在有--server.urls+http://localhost:5000的地方，只需要为计算机名或ip地址更改localhost+(或者同时添加两个地址)，例如--server.urls+http://mypc:5000。|offset|length|style|CODE|1825696|这对我有效，所以我希望它对你是这样的！|1825697|entityMap^0|0|7|D|18|Z|2Q|9|3F|U|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|M|8|@$D|N|E|O|F|G]|$D|P|E|Q|F|G]|$D|R|E|S|F|G]|$D|T|E|U|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|V|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|W|8|@]|9|@]|A|$]]]|K|$]]

I was having the same issue trying to self host and only being able to access locally. I checked with Angry IP Scanner and saw that the port wasn't even open when the app was running so obviously that would prevent remote access.

Eventually I realised the <code>--server.urls</code> command must basically work like bindings in IIS, so where you have <code>--server.urls http://localhost:5000</code>, you just need to change <code>localhost</code> for your computer name or ip address (or add both) e.g. <code>--server.urls http://mypc:5000</code>.

This worked for me so I hope it does for you!

blocks|key|1825703|text|这个问题的答案可以在这里找到--+https://github.com/aspnet/Home/issues/799|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|1825704|将server.urls=http://localhost:5000更改为server.urls=:5000，但如果这样做，则需要以admin方式运行进程(或VS)。|blockquote|1825705|entityMap|0|LINK|mutability|MUTABLE|url|https://github.com/aspnet/Home/issues/799|1|http://localhost:5000/|2|http://*:5000/^0|H|15|0|0|D|L|1|1D|5|2|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@$A|T|B|U|1|V]]|C|$]]|$1|D|3|E|5|F|7|W|8|@]|9|@$A|X|B|Y|1|Z]|$A|10|B|11|1|12]]|C|$]]|$1|G|3|-4|5|6|7|13|8|@]|9|@]|C|$]]]|H|$I|$5|J|K|L|C|$M|N]]|O|$5|J|K|L|C|$M|P]]|Q|$5|J|K|L|C|$M|R]]]]

The answer to this question can be found here <a href="https://github.com/aspnet/Home/issues/799" rel="nofollow">https://github.com/aspnet/Home/issues/799</a>

<blockquote>
 Change server.urls=<a href="http://localhost:5000" rel="nofollow">http://localhost:5000</a> to server.urls=http://*:5000, but if you do that you'll need to run the process (or VS) as admin.
</blockquote>

blocks|key|1484092|text|您应该允许应用程序的传入连接：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1484093|首先，启动管理命令提示符。其次，运行以下命令，将您的端口替换为您正在使用的任何IP和端口：|1484094|http添加urlacl+url=http://yourip:yourport/+user=everyone|blockquote|offset|length|1484095|这只是告诉http.sys，与这个url对话是可以的。|1484096|entityMap|0|LINK|mutability|MUTABLE|url|http://yourip:yourport/^0|0|0|H|N|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|T|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|U|8|@]|9|@$G|V|H|W|1|X]]|A|$]]|$1|I|3|J|5|6|7|Y|8|@]|9|@]|A|$]]|$1|K|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|L|$M|$5|N|O|P|A|$Q|R]]]]

You should allow incoming connections for your application:

First, start an administrative command prompt. Second, run these commands, replacing yourip:yourport with whatever IP and port you are using:

<blockquote>
 netsh http add urlacl url=<a href="http://yourip:yourport/" rel="nofollow">http://yourip:yourport/</a> user=everyone
</blockquote>

This just tells http.sys that it’s ok to talk to this url.

I Have a project in ASP.NET 5 using self-host.

PROJECT.JSON

<pre><code>"commands": {
"web": "Microsoft.AspNet.Hosting --server Microsoft.AspNet.Server.WebListener --server.urls http://localhost:5000",
"gen": "Microsoft.Framework.CodeGeneration",
"ef": "EntityFramework.Commands"
},
</code></pre>

It using the <a href="http://localhost:5000" rel="nofollow">http://localhost:5000</a>...

I want to know how can i acess the website from another PC, not using localhost. Like a IP with or without DNS.

Please, help me!

ASP.NET 5 Self-Host

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

我在ASP.NET 5中有一个使用自主机的项目.PROJECT.JSON"commands": {"web": "Microsoft.AspNet.Hosting --server Microsoft.AspNet.Server.WebListener --server.urls http://localhost:50...

问ASP.NET 5自主机
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问ASP.NET 5自主机EN