blocks|key|1814713|text|这将是一个简单的命令|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1814714|nodemon+--exec+npm+start|code-block|syntax|javascript|1814715|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

This will be a simple command for this

<pre><code>nodemon --exec npm start
</code></pre>

blocks|key|1211387|text|json包：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1211388|{
++"name":+"abc",
++"version":+"0.0.1",
++"description":+"my+server",
++"scripts":+{
++++"start":+"nodemon+my_file.js"
++},
++"devDependencies":+{
++++"nodemon":+"~1.3.8",
++},
++"dependencies":+{

++}
}|code-block|syntax|javascript|1211389|然后从终端可以使用npm+start|offset|length|style|CODE|1211390|Nodemon安装：https://www.npmjs.com/package/nodemon|1211391|entityMap|0|LINK|mutability|MUTABLE|url|https://www.npmjs.com/package/nodemon^0|0|0|9|9|0|A|11|0|0^^$0|@$1|2|3|4|5|6|7|W|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|X|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Y|8|@$I|Z|J|10|K|L]]|9|@]|A|$]]|$1|M|3|N|5|6|7|11|8|@]|9|@$I|12|J|13|1|14]]|A|$]]|$1|O|3|-4|5|6|7|15|8|@]|9|@]|A|$]]]|P|$Q|$5|R|S|T|A|$U|V]]]]

In package json:

<pre><code>{
 "name": "abc",
 "version": "0.0.1",
 "description": "my server",
 "scripts": {
 "start": "nodemon my_file.js"
 },
 "devDependencies": {
 "nodemon": "~1.3.8",
 },
 "dependencies": {

 }
}
</code></pre>

Then from the terminal you can use <code>npm start</code>

Nodemon installation: <a href="https://www.npmjs.com/package/nodemon" rel="noreferrer">https://www.npmjs.com/package/nodemon</a>

blocks|key|1814697|text|我有一个名为“TypeScript”的server.ts文件，下面的npm脚本配置Nodemon和npm来启动我的应用程序，并监视TypeScript文件上的任何更改：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1814698|"start":+"nodemon+-e+ts++--exec+\"npm+run+myapp\"",
"myapp":+"tsc+-p+.+&&+node+server.js",|code-block|syntax|javascript|1814699|我已经没有依赖关系了。当我运行npm+start时，它将要求Nodemon使用-e开关监视它的文件，然后调用myapp+npm脚本，这是一个简单的组合，它转换类型记录文件，然后启动结果server.js。当我更改TypeScript文件时，由于-e切换，会发生相同的循环，并生成和执行新的.js文件。|offset|length|style|CODE|1814700|entityMap^0|0|0|F|9|13|2|1I|5|3E|2|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Q|8|@$I|R|J|S|K|L]|$I|T|J|U|K|L]|$I|V|J|W|K|L]|$I|X|J|Y|K|L]]|9|@]|A|$]]|$1|M|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|N|$]]

I have a TypeScript file called "server.ts", The following npm scripts configures Nodemon and npm to start my app and monitor for any changes on TypeScript files:

<pre><code>"start": "nodemon -e ts --exec \"npm run myapp\"",
"myapp": "tsc -p . &amp;&amp; node server.js",
</code></pre>

I already have Nodemon on dependencies. When I run <code>npm start</code>, it will ask Nodemon to monitor its files using the <code>-e</code> switch and then it calls the <code>myapp</code> npm script which is a simple combination of transpiling the typescript files and then starting the resulting server.js. When I change the TypeScript file, because of <code>-e</code> switch the same cycle happens and new .js files will be generated and executed.

blocks|key|2371473|text|我在我的Node.js项目中使用NodemonVersion1.88.3。要安装Nodemon，请参阅https://www.npmjs.com/package/nodemon。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|2371474|检查您的package.json，看看“脚本”是否发生了如下变化：|2371475|++"scripts":+{
++++"dev":+"nodemon+server.js"
++},|code-block|syntax|javascript|2371476|server.js是我的文件名，您可以为这个文件使用另一个名称，如app.js。|style|CODE|2371477|之后，在您的终端上运行以下命令：npm+run+dev|2371478|entityMap|0|LINK|mutability|MUTABLE|url|https://www.npmjs.com/package/nodemon^0|1F|11|0|0|0|0|0|9|X|6|0|G|B|0^^$0|@$1|2|3|4|5|6|7|Y|8|@]|9|@$A|Z|B|10|1|11]]|C|$]]|$1|D|3|E|5|6|7|12|8|@]|9|@]|C|$]]|$1|F|3|G|5|H|7|13|8|@]|9|@]|C|$I|J]]|$1|K|3|L|5|6|7|14|8|@$A|15|B|16|M|N]|$A|17|B|18|M|N]]|9|@]|C|$]]|$1|O|3|P|5|6|7|19|8|@$A|1A|B|1B|M|N]]|9|@]|C|$]]|$1|Q|3|-4|5|6|7|1C|8|@]|9|@]|C|$]]]|R|$S|$5|T|U|V|C|$W|X]]]]

I use Nodemon version 1.88.3 in my Node.js project.
To install Nodemon, see in <a href="https://www.npmjs.com/package/nodemon" rel="noreferrer">https://www.npmjs.com/package/nodemon</a>.

Check your package.json, see if "scripts" has changed like this:

<pre><code> "scripts": {
 "dev": "nodemon server.js"
 },
</code></pre>

<code>server.js</code> is my file name, you can use another name for this file like <code>app.js</code>.

After that, run this on your terminal: <code>npm run dev</code>

blocks|key|1211351|text|使用-exec|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1211352|"your-script-name":+"nodemon+[options]+--exec+'npm+start+-s'"|code-block|syntax|javascript|1211353|entityMap^0|2|5|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@$9|N|A|O|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|P|8|@]|D|@]|E|$I|J]]|$1|K|3|-4|5|6|7|Q|8|@]|D|@]|E|$]]]|L|$]]

Use <code>-exec</code>:

<pre><code>"your-script-name": "nodemon [options] --exec 'npm start -s'"
</code></pre>

blocks|key|1211525|text|包内json|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1211526|"scripts":+{
++"start":+"node+index",
++"dev":+"nodemon+index"
},

"devDependencies":+{
++"nodemon":+"%5E2.0.2"
}|code-block|syntax|javascript|1211527|在开发终端：|1211528|npm+run+dev|1211529|并定期启动服务器：|1211530|npm+start|1211531|entityMap^0|2|4|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@$9|V|A|W|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|X|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|Y|8|@]|D|@]|E|$]]|$1|M|3|N|5|H|7|Z|8|@]|D|@]|E|$I|J]]|$1|O|3|P|5|6|7|10|8|@]|D|@]|E|$]]|$1|Q|3|R|5|H|7|11|8|@]|D|@]|E|$I|J]]|$1|S|3|-4|5|6|7|12|8|@]|D|@]|E|$]]]|T|$]]

In package <code>json</code>:
<pre><code>&quot;scripts&quot;: {
 &quot;start&quot;: &quot;node index&quot;,
 &quot;dev&quot;: &quot;nodemon index&quot;
},

&quot;devDependencies&quot;: {
 &quot;nodemon&quot;: &quot;^2.0.2&quot;
}
</code></pre>
And in the terminal for developing:
<pre><code>npm run dev
</code></pre>
And for starting the server regularly:
<pre><code>npm start
</code></pre>

blocks|key|1814739|text|首先更改您的package.json文件，|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1814740|"scripts":
++++{+
++++++++"start":+"node+./bin/www",
++++++++"start-dev":+"nodemon+./app.js"
++++},|code-block|syntax|javascript|1814741|之后，执行命令。|1814742|npm+run+start-dev|1814743|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|N|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|O|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

First change your package.json file,

<pre><code>"scripts":
 { 
 "start": "node ./bin/www",
 "start-dev": "nodemon ./app.js"
 },
</code></pre>

After that, execute command

<pre><code>npm run start-dev
</code></pre>

blocks|key|1814777|text|在package.json文件中。像这样修改文件|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1814778|"scripts":{+
+++"start":+"node+./bin/www",+
+++"start-dev":+"nodemon+./app.js"
+},|code-block|syntax|javascript|1814779|然后执行npm运行启动-dev。|offset|length|style|BOLD|1814780|entityMap^0|0|0|4|B|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Q|8|@$I|R|J|S|K|L]]|9|@]|A|$]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

In package.json file. change file like this

<pre><code>"scripts":{ 
 "start": "node ./bin/www", 
 "start-dev": "nodemon ./app.js"
 },
</code></pre>

and then execute npm run start-dev

blocks|key|2371457|text|Nodemon在每次状态更改时都会发出事件；启动、重新启动崩溃等。您可以添加一个nodemon.json文件(nodemon.json)，如下所示：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2371458|{
+++"events":+{
+++++++"start":+"npm+run+*your_file*"
+++}
}|code-block|syntax|javascript|2371459|在https://medium.com/netscape/nodemon-events-run-tasks-at-server-start-restart-crash-exit-93a34c54dfd8中阅读更多内容。|offset|length|2371460|entityMap|0|LINK|mutability|MUTABLE|url|https://medium.com/netscape/nodemon-events-run-tasks-at-server-start-restart-crash-exit-93a34c54dfd8^0|0|0|1|2S|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|T|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|U|8|@]|9|@$I|V|J|W|1|X]]|A|$]]|$1|K|3|-4|5|6|7|Y|8|@]|9|@]|A|$]]]|L|$M|$5|N|O|P|A|$Q|R]]]]

Nodemon emits events upon every change in state; start, restart crash, etc. You can add a Nodemon configuration file (nodemon.json) like so:

<pre><code>{
 "events": {
 "start": "npm run *your_file*"
 }
}
</code></pre>

Read more in <a href="https://medium.com/netscape/nodemon-events-run-tasks-at-server-start-restart-crash-exit-93a34c54dfd8" rel="nofollow noreferrer">Nodemon events — run tasks at server start, restart, crash, exit</a>.

blocks|key|2371689|text|如果全局安装，那么|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2371690|"scripts":+{
++++"start":+"nodemon+FileName.js(server.js)",
},|code-block|syntax|javascript|2371691|确保您已经全局安装了nodemon：|offset|length|style|CODE|2371692|npm+install+-g+nodemon|2371693|最后，如果您是Windows用户，请确保启用了Windows+PowerShell的安全限制。|2371694|entityMap|0|LINK|mutability|MUTABLE|url|https://stackoverflow.com/questions/32692087/nuget-give-this-error-ps1-cannot-be-loaded-because-running-scripts-is-disabled^0|0|0|A|7|0|0|K|Q|0|0^^$0|@$1|2|3|4|5|6|7|Y|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|Z|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|10|8|@$I|11|J|12|K|L]]|9|@]|A|$]]|$1|M|3|N|5|D|7|13|8|@]|9|@]|A|$E|F]]|$1|O|3|P|5|6|7|14|8|@]|9|@$I|15|J|16|1|17]]|A|$]]|$1|Q|3|-4|5|6|7|18|8|@]|9|@]|A|$]]]|R|$S|$5|T|U|V|A|$W|X]]]]

If globally installed then
<pre><code>&quot;scripts&quot;: {
 &quot;start&quot;: &quot;nodemon FileName.js(server.js)&quot;,
},
</code></pre>
Make sure you have installed <code>nodemon</code> globally:
<pre><code>npm install -g nodemon
</code></pre>
Finally, if you are a Windows user, make sure that <a href="https://stackoverflow.com/questions/32692087/nuget-give-this-error-ps1-cannot-be-loaded-because-running-scripts-is-disabled">the security restriction of the Windows PowerShell is enabled</a>.

blocks|key|1211714|text|我只是在终端中使用'npx‘来设置nodemon并执行它。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1211715|npx+nodemon|code-block|syntax|javascript|1211716|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

I simply use 'npx' in the terminal to set up nodemon and execute it
<pre><code>npx nodemon
</code></pre>

blocks|key|1211546|text|您还可以在全球范围内安装nodemon，以便经常使用：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1211547|npm+i+nodemon+-g或sudo+npm+i+nodemon+-g|offset|length|style|CODE|1211548|然后编辑您的package.json：|1211549|++"scripts":+{
++++"start":+"node+index.js",
++++"dev":+"nodemon+index.js"
++},|code-block|syntax|javascript|1211550|通常，“dev”指定开发用途(npm运行dev)。|BOLD|1211551|entityMap^0|0|0|G|H|L|0|0|0|F|8|0^^$0|@$1|2|3|4|5|6|7|T|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|U|8|@$D|V|E|W|F|G]|$D|X|E|Y|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|Z|8|@]|9|@]|A|$]]|$1|J|3|K|5|L|7|10|8|@]|9|@]|A|$M|N]]|$1|O|3|P|5|6|7|11|8|@$D|12|E|13|F|Q]]|9|@]|A|$]]|$1|R|3|-4|5|6|7|14|8|@]|9|@]|A|$]]]|S|$]]

You can also install nodemon globally for frequent use: 

<code>npm i nodemon -g</code> or <code>sudo npm i nodemon -g</code>

then edit your package.json:

<pre><code> "scripts": {
 "start": "node index.js",
 "dev": "nodemon index.js"
 },
</code></pre>

Generally, 'dev' specifies developmental use (npm run dev).

blocks|key|2371602|text|这将取决于Nodemon安装的类型。如果使用命令(npm+install+nodemon+--global或npm+install+nodemon+-g)全局安装Nodemon，则不必在package.json文件中为Nodemon指定任何脚本。只需执行命令nodemon+index.js就可以运行项目。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2371603|但是，如果通过命令npm+install+nodemon在本地安装Nodemon，则必须指定脚本。如果您将其命名为start，那么npm+run+start或npm+start将触发服务器运行。|BOLD|2371604|//+Absolutely+no+need+for+global+installation
+"scripts":+{
++++"start":+"nodemon+index.js"
++}|code-block|syntax|javascript|2371605|entityMap^0|P|S|1I|M|3L|G|0|9|J|1T|D|27|9|1L|5|0|0^^$0|@$1|2|3|4|5|6|7|P|8|@$9|Q|A|R|B|C]|$9|S|A|T|B|C]|$9|U|A|V|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|W|8|@$9|X|A|Y|B|C]|$9|Z|A|10|B|C]|$9|11|A|12|B|C]|$9|13|A|14|B|H]]|D|@]|E|$]]|$1|I|3|J|5|K|7|15|8|@]|D|@]|E|$L|M]]|$1|N|3|-4|5|6|7|16|8|@]|D|@]|E|$]]]|O|$]]

It will depend on types of your Nodemon installation. If you install Nodemon globally by using commands (<code>npm install nodemon --global</code> or <code>npm install nodemon -g</code>), you do not have to specify any script for Nodemon in your package.json file. Just executing command <code>nodemon index.js</code> will run your project.

But if you install Nodemon locally by command <code>npm install nodemon</code> then you have to specify the script. If you name it as start then <code>npm run start</code> or <code>npm start</code> will trigger the server to run.

<pre><code>// Absolutely no need for global installation
 "scripts": {
 "start": "nodemon index.js"
 }
</code></pre>

blocks|key|2371785|text|{“名称”：“后端”，“版本”："0.0.0"，“私有”：真，“脚本”：{“开始”：“nodem.bin/www”}，“依赖关系”：{+"bcrypt"："%5E5.0.1"，“cookie-解析器”："~1.4.4"，“调试”："~2.6.9"，“表示”："~4.16.1"，"hbs"："%5E4.1.2"，“http-错误”："~1.6.3"，“摩根”："~1.9.1"，"nodemon"："%5E2.0.12“}|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2371786|使用"nodemon+./bin/www“脚本>开始|blockquote|2371787|例：|unordered-list-item|2371788|“脚本”：{“开始”：“nodem.bin/www”}，|2371789|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|M|8|@]|9|@]|A|$]]|$1|E|3|F|5|G|7|N|8|@]|9|@]|A|$]]|$1|H|3|I|5|D|7|O|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|P|8|@]|9|@]|A|$]]]|K|$]]

{
&quot;name&quot;: &quot;backend&quot;,
&quot;version&quot;: &quot;0.0.0&quot;,
&quot;private&quot;: true,
&quot;scripts&quot;: {
&quot;start&quot;: &quot;nodemon ./bin/www&quot;
},
&quot;dependencies&quot;: {
&quot;bcrypt&quot;: &quot;^5.0.1&quot;,
&quot;cookie-parser&quot;: &quot;~1.4.4&quot;,
&quot;debug&quot;: &quot;~2.6.9&quot;,
&quot;express&quot;: &quot;~4.16.1&quot;,
&quot;hbs&quot;: &quot;^4.1.2&quot;,
&quot;http-errors&quot;: &quot;~1.6.3&quot;,
&quot;morgan&quot;: &quot;~1.9.1&quot;,
&quot;nodemon&quot;: &quot;^2.0.12&quot;
}
}
<blockquote>
use &quot;nodemon ./bin/www&quot; scripts &gt; start
</blockquote>
<ul>
<li>eg:</li>
</ul>
<blockquote>
&quot;scripts&quot;: {
&quot;start&quot;: &quot;nodemon ./bin/www&quot;
},
</blockquote>

blocks|key|1815107|text|试试这个，用手表：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1815108|nodemon+--exec+ts-node+pathtoapp/filewithserver.ts+-e+ts|code-block|syntax|javascript|1815109|我的项目示例：nodemon+--exec+ts-node+src/server.ts+-e+ts|offset|length|style|CODE|1815110|entityMap^0|0|0|7|16|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Q|8|@$I|R|J|S|K|L]]|9|@]|A|$]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

Try this, with watch:
<pre><code>nodemon --exec ts-node pathtoapp/filewithserver.ts -e ts
</code></pre>
my project example: <code>nodemon --exec ts-node src/server.ts -e ts</code>

blocks|key|1814884|text|如果nodemon是全局安装的，那么只需在项目中运行nodemon就可以从package.json自动运行start脚本。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1814885|例如：|1814886|"scripts":+{
++"start":+"node+src/server.js"
},|code-block|syntax|javascript|1814887|来自非恶魔文献|1814888|nodemon还将在scripts.start+(nodemon1.1.x)中搜索package.json属性。|blockquote|1814889|entityMap|0|LINK|mutability|MUTABLE|url|https://github.com/remy/nodemon#usage^0|2|7|Q|7|11|C|1H|5|0|0|0|2|5|0|0|0^^$0|@$1|2|3|4|5|6|7|Z|8|@$9|10|A|11|B|C]|$9|12|A|13|B|C]|$9|14|A|15|B|C]|$9|16|A|17|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|18|8|@]|D|@]|E|$]]|$1|H|3|I|5|J|7|19|8|@]|D|@]|E|$K|L]]|$1|M|3|N|5|6|7|1A|8|@]|D|@$9|1B|A|1C|1|1D]]|E|$]]|$1|O|3|P|5|Q|7|1E|8|@]|D|@]|E|$]]|$1|R|3|-4|5|6|7|1F|8|@]|D|@]|E|$]]]|S|$T|$5|U|V|W|E|$X|Y]]]]

If you have <code>nodemon</code> installed globally, simply running <code>nodemon</code> in your project will automatically run the <code>start</code> script from <code>package.json</code>.

For example:

<pre><code>"scripts": {
 "start": "node src/server.js"
},
</code></pre>

From <a href="https://github.com/remy/nodemon#usage" rel="nofollow noreferrer">the nodemon documentation</a>:

<blockquote>
 nodemon will also search for the scripts.start property in package.json (as of nodemon 1.1.x).
</blockquote>

blocks|key|1815010|text|我知道已经晚了5年了，如果你想使用nodemon.json，你可以试试这个，|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1815011|{
++"verbose":+true,
++"ignore":+["*.test.js",+"fixtures/*"],
++"execMap":+{
++++"js":+"electron+."+//+'js'+is+for+the+extension,+and+'electron+.'+is+command+that+I+want+to+execute
++}
}|code-block|syntax|javascript|1815012|execMap将像package.json中的script一样执行，然后可以运行nodemon+js|1815013|entityMap^0|H|C|0|0|0|7|N|6|14|A|0^^$0|@$1|2|3|4|5|6|7|O|8|@$9|P|A|Q|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|R|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|S|8|@$9|T|A|U|B|C]|$9|V|A|W|B|C]|$9|X|A|Y|B|C]]|D|@]|E|$]]|$1|M|3|-4|5|6|7|Z|8|@]|D|@]|E|$]]]|N|$]]

I know it's 5 years late, if you want to use <code>nodemon.json</code> you may try this,
<pre><code>{
 &quot;verbose&quot;: true,
 &quot;ignore&quot;: [&quot;*.test.js&quot;, &quot;fixtures/*&quot;],
 &quot;execMap&quot;: {
 &quot;js&quot;: &quot;electron .&quot; // 'js' is for the extension, and 'electron .' is command that I want to execute
 }
}
</code></pre>
The <code>execMap</code> will execute like a <code>script</code> in package.json, then you can run <code>nodemon js</code>

blocks|key|1211809|text|您可以使用它来代替npm：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1211810|npx+env-cmd+nodemon|code-block|syntax|javascript|1211811|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

You can use this instead of npm start :
<pre><code>npx env-cmd nodemon
</code></pre>

blocks|key|1815138|text|你可以这样做：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1815139|nodemon+--exec+ts-node+src/app.ts|code-block|syntax|javascript|1815140|这将永远为您运行app.ts|offset|length|style|CODE|1815141|entityMap^0|0|0|8|6|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Q|8|@$I|R|J|S|K|L]]|9|@]|A|$]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

You can do this one:
<pre><code>nodemon --exec ts-node src/app.ts
</code></pre>
This will run the <code>app.ts</code> for you forever

blocks|key|2371503|text|为了避免全局安装，添加Nodemon作为依赖项，然后.|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2371504|package.json|2371505|"scripts":+{
++++"start":+"node+./bin/www",
++++"start-dev":+"./node_modules/nodemon/bin/nodemon.js+./bin/www"
++},|code-block|syntax|javascript|2371506|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|L|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|M|8|@]|9|@]|A|$G|H]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

To avoid a global install, add Nodemon as a dependency, then...

package.json

<pre class="lang-json prettyprint-override"><code>"scripts": {
 "start": "node ./bin/www",
 "start-dev": "./node_modules/nodemon/bin/nodemon.js ./bin/www"
 },
</code></pre>

How can I execute the start script from a package.json file with Nodemon?

问如何使用Nodemon执行开始脚本
EN

回答 20

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何使用Nodemon执行开始脚本EN

回答 20

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何使用Nodemon执行开始脚本
EN