blocks|key|850450|text|是的，您需要确保~/.composer/vendor/bin目录位于系统的PATH中，您可以通过运行以下命令来检查这个目录：|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|850451|echo+$PATH|code-block|syntax|javascript|850452|如果您无法在那里看到它，则需要将其添加到~/.bash_profile中。|850453|export+PATH=$PATH:~/.composer/vendor/bin|850454|entityMap^0|8|M|11|4|0|0|K|F|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@$9|R|A|S|B|C]|$9|T|A|U|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|V|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|W|8|@$9|X|A|Y|B|C]]|D|@]|E|$]]|$1|M|3|N|5|H|7|Z|8|@]|D|@]|E|$I|J]]|$1|O|3|-4|5|6|7|10|8|@]|D|@]|E|$]]]|P|$]]

Yes, you need to make sure that <code>~/.composer/vendor/bin</code> directory is in your system's <code>PATH</code>, you can check this by running:

<pre><code>echo $PATH
</code></pre>

If you can't see it there, then you need to add this to your <code>~/.bash_profile</code>:

<pre><code>export PATH=$PATH:~/.composer/vendor/bin
</code></pre>

blocks|key|1604644|text|将~/.composer/vendor/bin目录添加到PATH变量中。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1604645|entityMap^0|1|M|S|4|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|M|8|@]|D|@]|E|$]]]|G|$]]

Add <code>~/.composer/vendor/bin</code> directory to your <code>PATH</code> variable.

blocks|key|830834|text|如果您有一个新的安装，您可能没有包含您的主路径的PATH变量。因此，添加$HOME变量需要如下所示：|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|830835|export+PATH="$PATH:$HOME/.composer/vendor/bin|830836|entityMap^0|O|4|10|5|0|0|19|0^^$0|@$1|2|3|4|5|6|7|J|8|@$9|K|A|L|B|C]|$9|M|A|N|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|O|8|@$9|P|A|Q|B|C]]|D|@]|E|$]]|$1|H|3|-4|5|6|7|R|8|@]|D|@]|E|$]]]|I|$]]

If you have a fresh installation, you may not have the <code>PATH</code> variable contains your home path. So, adding the <code>$HOME</code> variable would require like the following:

<code>export PATH="$PATH:$HOME/.composer/vendor/bin</code>

blocks|key|850521|text|使用新的composer安装，您需要添加一个新路径，即|type|unstyled|depth|inlineStyleRanges|entityRanges|data|850522|export+PATH=$PATH:~/.config/composer/vendor/bin|code-block|syntax|javascript|850523|那你就得|850524|chown+YOUR_USERNAME+~/.config|850525|用于访问没有sudo命令的composer包。|850526|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Q|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|R|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|S|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

with new composer installation, you need to add a new path which is

<pre><code>export PATH=$PATH:~/.config/composer/vendor/bin
</code></pre>

Then you need to

<pre><code>chown YOUR_USERNAME ~/.config
</code></pre>

for accessing composer packages without sudo command.

blocks|key|830893|text|例如，如果收到错误消息"valet:命令未找到“，则可能PATH的编写器不在您的PATH变量中：|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|CODE|entityRanges|data|830894|$+valet+install
-bash:+valet:+command+not+found|code-block|syntax|javascript|830895|可以通过运行以下命令确认是否成功安装了拉勒维尔瓦莱特：|830896|ls+-al+~/.composer/vendor/bin/valet|830897|如果成功，您将在Composer的bin目录中看到Valet的符号链接，指向vendor目录中的Laravel：|830898|~/.composer/vendor/bin/valet@+->+../laravel/valet/valet|830899|要测试您的PATH+是否缺少编写器，请尝试直接运行命令：|830900|~/.composer/vendor/bin/valet+--version|830901|如果向您显示了Laravel版本号(例如Laravel+Valet+2.0.4)，这表明已经安装了Valet，但您需要变量来包含valet命令的编写器，以便在全球范围内工作。|830902|在终端中，执行以下命令，将编写器附加到shell的路径中：|830903|export+PATH=$PATH:~/.composer/vendor/bin|830904|要使更改生效，您需要退出并重新打开终端窗口或选项卡。|830905|或者，您可以简单地获取shell的配置文件，这不需要退出活动会话：|830906|source+~/.bash_profile|830907|如果您有不同的shell环境，或者使用的是Bash以外的shell，则需要使用它的配置配置文件(例如.bashrc__、.zshrc__、config.fish__)。|830908|entityMap|0|LINK|mutability|MUTABLE|url|https://laravel.com/docs/5.4/valet|1|https://stackoverflow.com/a/25373254/245264^0|C|B|S|4|14|4|0|0|J|7|0|0|0|H|3|12|6|0|0|5|4|A|I|5|4|0|0|K|J|1S|5|1N|2|1|0|0|0|0|0|0|1E|7|1O|6|1X|B|0^^$0|@$1|2|3|4|5|6|7|1L|8|@$9|1M|A|1N|B|C]|$9|1O|A|1P|B|D]|$9|1Q|A|1R|B|D]]|E|@]|F|$]]|$1|G|3|H|5|I|7|1S|8|@]|E|@]|F|$J|K]]|$1|L|3|M|5|6|7|1T|8|@]|E|@$9|1U|A|1V|1|1W]]|F|$]]|$1|N|3|O|5|I|7|1X|8|@]|E|@]|F|$J|K]]|$1|P|3|Q|5|6|7|1Y|8|@$9|1Z|A|20|B|D]|$9|21|A|22|B|D]]|E|@]|F|$]]|$1|R|3|S|5|I|7|23|8|@]|E|@]|F|$J|K]]|$1|T|3|U|5|6|7|24|8|@$9|25|A|26|B|C]|$9|27|A|28|B|C]|$9|29|A|2A|B|D]]|E|@]|F|$]]|$1|V|3|W|5|I|7|2B|8|@]|E|@]|F|$J|K]]|$1|X|3|Y|5|6|7|2C|8|@$9|2D|A|2E|B|D]|$9|2F|A|2G|B|D]]|E|@$9|2H|A|2I|1|2J]]|F|$]]|$1|Z|3|10|5|6|7|2K|8|@]|E|@]|F|$]]|$1|11|3|12|5|I|7|2L|8|@]|E|@]|F|$J|K]]|$1|13|3|14|5|6|7|2M|8|@]|E|@]|F|$]]|$1|15|3|16|5|6|7|2N|8|@]|E|@]|F|$]]|$1|17|3|18|5|I|7|2O|8|@]|E|@]|F|$J|K]]|$1|19|3|1A|5|6|7|2P|8|@$9|2Q|A|2R|B|D]|$9|2S|A|2T|B|D]|$9|2U|A|2V|B|D]]|E|@]|F|$]]|$1|1B|3|-4|5|6|7|2W|8|@]|E|@]|F|$]]]|1C|$1D|$5|1E|1F|1G|F|$1H|1I]]|1J|$5|1E|1F|1G|F|$1H|1K]]]]

If you're getting the error message "valet: command not found", it's likely that PHP's Composer is not in your <code>PATH</code> variable, for instance:

<pre><code>$ valet install
-bash: valet: command not found
</code></pre>

You can confirm if <a href="https://laravel.com/docs/5.4/valet" rel="noreferrer">Laravel Valet</a> was successfully installed by running the following command:

<pre><code>ls -al ~/.composer/vendor/bin/valet
</code></pre>

If successfull, you'll see the symlink for Valet in Composer's <code>bin</code> directory pointing to Laravel in the <code>vendor</code> directory:

<pre><code>~/.composer/vendor/bin/valet@ -&gt; ../laravel/valet/valet
</code></pre>

To test whether your <code>PATH</code> is missing Composer, try running the Valet command directly:

<pre><code>~/.composer/vendor/bin/valet --version
</code></pre>

If you're shown the Laravel version number, (e.g. <code>Laravel Valet 2.0.4</code>), this indicates Valet is installed but you need to <a href="https://stackoverflow.com/a/25373254/245264">update your <code>PATH</code> variable</a> to include Composer for the <code>valet</code> command to work globally.

In your Terminal, execute the following command which will append Composer to your shell's PATH:

<pre><code>export PATH=$PATH:~/.composer/vendor/bin
</code></pre>

For the changes to take effect, you'll need to exit and re-open your Terminal window or tab.

Alternatively, you can simply source your shell's profile, which doesn't require quitting your active session:

<pre><code>source ~/.bash_profile
</code></pre>

If you have a different shell environment or you're using a shell other than Bash, you will need to source its configuration profile instead (e.g. <code>.bashrc</code>, <code>.zshrc</code>, <code>config.fish</code>).

blocks|key|850599|text|请确保系统路径中有~/..composer/.composer/bin目录，您可以通过运行以下命令来检查这个目录：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|850600|echo+$PATH|code-block|syntax|javascript|850601|如果不在，打开您的~/..bash_profile并添加以下代码：|850602|export+PATH=$PATH:~/.composer/vendor/bin|850603|然后跑：|850604|composer+global+require+laravel/valet+--dev|850605|完成后，运行：|850606|valet+install|850607|entityMap^0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|V|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|W|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|X|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|Y|8|@]|9|@]|A|$]]|$1|M|3|N|5|D|7|Z|8|@]|9|@]|A|$E|F]]|$1|O|3|P|5|6|7|10|8|@]|9|@]|A|$]]|$1|Q|3|R|5|D|7|11|8|@]|9|@]|A|$E|F]]|$1|S|3|-4|5|6|7|12|8|@]|9|@]|A|$]]]|T|$]]

Make sure that ~/.composer/vendor/bin directory is in your system's PATH, you can check this by running:

<pre><code>echo $PATH
</code></pre>

If not there, open your ~/.bash_profile and add this code: 

<pre><code>export PATH=$PATH:~/.composer/vendor/bin
</code></pre>

Then run:

<pre><code>composer global require laravel/valet --dev
</code></pre>

Once it is done, run:

<pre><code>valet install
</code></pre>

blocks|key|830941|text|此命令可能解决您的问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|830942|test+-d+~/.composer+&&+bash+~/.composer/vendor/bin/valet+install+%7C%7C+bash+~/.config/composer/vendor/bin/valet+install|code-block|syntax|javascript|830943|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

This command might solve your problem

<pre><code>test -d ~/.composer &amp;&amp; bash ~/.composer/vendor/bin/valet install || bash ~/.config/composer/vendor/bin/valet install
</code></pre>

blocks|key|850637|text|我在用哦-天哪，所以：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|850638|echo+"export+PATH=$PATH:$HOME/.config/composer/vendor/bin"+>>+~/.zshrc
source+~/.zshrc|code-block|syntax|javascript|850639|您可以将.zshrc替换为.bashrc|offset|length|style|CODE|850640|entityMap^0|0|0|4|6|D|7|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Q|8|@$I|R|J|S|K|L]|$I|T|J|U|K|L]]|9|@]|A|$]]|$1|M|3|-4|5|6|7|V|8|@]|9|@]|A|$]]]|N|$]]

I'm using oh-my-zsh so:

<pre><code>echo "export PATH=$PATH:$HOME/.config/composer/vendor/bin" &gt;&gt; ~/.zshrc
source ~/.zshrc
</code></pre>

You may replace <code>.zshrc</code> with <code>.bashrc</code>

blocks|key|850669|text|在Ubuntu+18.04中这样做：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|850670|echo+"export+PATH=$PATH:$HOME/.config/composer/vendor/bin"+>>+~/.bashrc
source+~/.bashrc|code-block|syntax|javascript|850671|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

In Ubuntu 18.04 do this:

<pre><code>echo "export PATH=$PATH:$HOME/.config/composer/vendor/bin" &gt;&gt; ~/.bashrc
source ~/.bashrc
</code></pre>

blocks|key|850707|text|我已经安装了Composer+版本2，并发现composer默认路径是~/.config/composer/，类似地，/.config/composer/vendor/bin/valet上也安装了valet。因此，为了解决这个问题，我将编写器路径添加到~/.bashrc文件中，如下所示：|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|CODE|entityRanges|data|850708|export+PATH=$PATH:~/.config/composer/vendor/bin|code-block|syntax|javascript|850709|entityMap^0|F|3|Z|J|1N|Y|3I|9|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@$9|O|A|P|B|C]|$9|Q|A|R|B|D]|$9|S|A|T|B|D]|$9|U|A|V|B|D]]|E|@]|F|$]]|$1|G|3|H|5|I|7|W|8|@]|E|@]|F|$J|K]]|$1|L|3|-4|5|6|7|X|8|@]|E|@]|F|$]]]|M|$]]

I have installed Composer version 2 and found that composer default path is <code>~/.config/composer/</code> and similarly valet is also installed on <code>/.config/composer/vendor/bin/valet</code>.
So to solve this issues I added the composer path to <code>~/.bashrc</code> file as:
<pre class="lang-sh prettyprint-override"><code>export PATH=$PATH:~/.config/composer/vendor/bin
</code></pre>

blocks|key|1604905|text|在我的例子中，我必须更新添加的/etc/profile文件|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1604906|导出路径=$PATH：~/..composer/供应商/bin|blockquote|1604907|在……里面|1604908|/etc/概况|1604909|然后|1604910|源~/etc/剖面|1604911|entityMap^0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@]|9|@]|A|$]]|$1|E|3|F|5|6|7|Q|8|@]|9|@]|A|$]]|$1|G|3|H|5|D|7|R|8|@]|9|@]|A|$]]|$1|I|3|J|5|6|7|S|8|@]|9|@]|A|$]]|$1|K|3|L|5|D|7|T|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|U|8|@]|9|@]|A|$]]]|N|$]]

In my case I've to update /etc/profile file
added
<blockquote>
export PATH=$PATH:~/.composer/vendor/bin
</blockquote>
in
<blockquote>
/etc/profile
</blockquote>
then
<blockquote>
source ~/etc/profile
</blockquote>

blocks|key|850825|text|如果valet+install不工作，但~/.composer/vendor/bin/valet+--version确实工作，请尝试通过|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|850826|~/.composer/vendor/bin/valet+install|code-block|syntax|javascript|850827|要确定这是否有效，请检查|850828|valet+--version|850829|entityMap^0|2|D|K|12|0|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@$9|R|A|S|B|C]|$9|T|A|U|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|V|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|W|8|@]|D|@]|E|$]]|$1|M|3|N|5|H|7|X|8|@]|D|@]|E|$I|J]]|$1|O|3|-4|5|6|7|Y|8|@]|D|@]|E|$]]]|P|$]]

If <code>valet install</code> doesn’t work, but <code>~/.composer/vendor/bin/valet --version</code> does work, try installing it via
<pre><code>~/.composer/vendor/bin/valet install
</code></pre>
To See if that worked, check
<pre><code>valet --version
</code></pre>

blocks|key|830268|text|你只需要用：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|830269|export+PATH="$PATH:$HOME/.composer/vendor/bin"|code-block|syntax|javascript|830270|然后|830271|valet+install|830272|准备:)|830273|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Q|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|R|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|S|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

you just have to use: 
<pre><code>export PATH=&quot;$PATH:$HOME/.composer/vendor/bin&quot;
</code></pre>
then 
<pre><code>valet install
</code></pre>
ready :)

blocks|key|850867|text|对我来说|type|unstyled|depth|inlineStyleRanges|entityRanges|data|850868|写入控制台|850869|cd+~/.composer/vendor/bin|ordered-list-item|offset|length|style|CODE|850870|pwd|850871|copy+pwd+command+result|850872|export+PATH=$PATH:+(pwd+command+result)|850873|valet+install|850874|我想我解释得很清楚|850875|entityMap^0|0|0|0|P|0|0|3|0|0|N|0|0|13|0|0|D|0|0^^$0|@$1|2|3|4|5|6|7|W|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|X|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|Y|8|@$G|Z|H|10|I|J]]|9|@]|A|$]]|$1|K|3|L|5|F|7|11|8|@$G|12|H|13|I|J]]|9|@]|A|$]]|$1|M|3|N|5|F|7|14|8|@$G|15|H|16|I|J]]|9|@]|A|$]]|$1|O|3|P|5|F|7|17|8|@$G|18|H|19|I|J]]|9|@]|A|$]]|$1|Q|3|R|5|F|7|1A|8|@$G|1B|H|1C|I|J]]|9|@]|A|$]]|$1|S|3|T|5|6|7|1D|8|@]|9|@]|A|$]]|$1|U|3|-4|5|6|7|1E|8|@]|9|@]|A|$]]]|V|$]]

For me worked
write in console
<ol>
<li><code>cd ~/.composer/vendor/bin</code></li>
<li><code>pwd</code></li>
<li><code>copy pwd command result</code></li>
<li><code>export PATH=$PATH: (pwd command result)</code></li>
<li><code>valet install</code></li>
</ol>
I think I explained well

blocks|key|830322|text|我在这个网站上找到了一个解决方案，它解决了我的问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|830323|test+-d+~/.composer+&&+bash+~/.composer/vendor/bin/valet+install+%7C%7C+bash+~/.config/composer/vendor/bin/valet+install|code-block|syntax|javascript|830324|https://hidayatabisena.medium.com/solving-issues-command-not-found-laravel-valet-install-on-macos-mojave-2a7629759a9f|offset|length|830325|entityMap|0|LINK|mutability|MUTABLE|url^0|0|0|0|39|0|0^^$0|@$1|2|3|4|5|6|7|R|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|S|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|T|8|@]|9|@$I|U|J|V|1|W]]|A|$]]|$1|K|3|-4|5|6|7|X|8|@]|9|@]|A|$]]]|L|$M|$5|N|O|P|A|$Q|H]]]]

I found a fix on this website, and it fixed my issue.
<pre><code>test -d ~/.composer &amp;&amp; bash ~/.composer/vendor/bin/valet install || bash ~/.config/composer/vendor/bin/valet install
</code></pre>
<a href="https://hidayatabisena.medium.com/solving-issues-command-not-found-laravel-valet-install-on-macos-mojave-2a7629759a9f" rel="nofollow noreferrer">https://hidayatabisena.medium.com/solving-issues-command-not-found-laravel-valet-install-on-macos-mojave-2a7629759a9f</a>

blocks|key|1605096|text|在我的例子中，我通过人工搜索找到了服务生的位置。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1605097|​|1605098|📷|atomic|offset|length|1605099|1605100|然后将代理文件路径添加到PATH变量中。|style|CODE|1605101|echo+'export+PATH="$PATH:$HOME/.config/composer/vendor/bin"'+>>+~/.bashrc|code-block|syntax|javascript|1605102|然后我运行了install命令，它起了作用。|1605103|valet+install|1605104|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://developer.qcloudimg.com/http-save/yehe-900000/f9607d0f4d5f65e3f74b471de30823cf.png|imageAlt^0|0|0|0|1|0|0|0|C|4|0|0|0|0^^$0|@$1|2|3|4|5|6|7|15|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|16|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|17|8|@]|9|@$G|18|H|19|1|1A]]|A|$]]|$1|I|3|C|5|6|7|1B|8|@]|9|@]|A|$]]|$1|J|3|K|5|6|7|1C|8|@$G|1D|H|1E|L|M]]|9|@]|A|$]]|$1|N|3|O|5|P|7|1F|8|@]|9|@]|A|$Q|R]]|$1|S|3|T|5|6|7|1G|8|@]|9|@]|A|$]]|$1|U|3|V|5|P|7|1H|8|@]|9|@]|A|$Q|R]]|$1|W|3|-4|5|6|7|1I|8|@]|9|@]|A|$]]]|X|$Y|$5|Z|10|11|A|$12|13|14|-4]]]]

In my case I found the valet location by manual search
<a href="https://i.stack.imgur.com/39Jt6.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/39Jt6.png" alt="enter image description here" /></a>
Then add the the valet file path to <code>PATH</code> variable
<pre class="lang-sh prettyprint-override"><code>echo 'export PATH=&quot;$PATH:$HOME/.config/composer/vendor/bin&quot;' &gt;&gt; ~/.bashrc
</code></pre>
Then I ran the install command and it worked
<pre><code>valet install
</code></pre>

blocks|key|831130|text|可能没有安装Php|type|unstyled|depth|inlineStyleRanges|entityRanges|data|831131|将您的首选版本用于：|831132|brew+install+php
//+or
brew+install+php@8.0
//+or
brew+install+php@7.4|code-block|syntax|javascript|831133|这解决了我的问题。|831134|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|N|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|O|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|P|8|@]|9|@]|A|$]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

Php may be not installed
Use your prefered version with:
<pre><code>brew install php
// or
brew install php@8.0
// or
brew install php@7.4
</code></pre>
This solved my issue.

blocks|key|851009|text|如果使用zsh，则不能使用~作为home+dir的路径，而是使用$HOME。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|851010|在.zshrc文件中，而不是添加以下内容：|851011|export+PATH=$PATH:~/.composer/vendor/bin|code-block|syntax|javascript|851012|如果添加此内容，则路径将解析：|851013|export+PATH=$PATH:$HOME/.composer/vendor/bin|851014|entityMap^0|D|1|W|5|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@$9|T|A|U|B|C]|$9|V|A|W|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|X|8|@]|D|@]|E|$]]|$1|H|3|I|5|J|7|Y|8|@]|D|@]|E|$K|L]]|$1|M|3|N|5|6|7|Z|8|@]|D|@]|E|$]]|$1|O|3|P|5|J|7|10|8|@]|D|@]|E|$K|L]]|$1|Q|3|-4|5|6|7|11|8|@]|D|@]|E|$]]]|R|$]]

If you're using zsh, you cannot use <code>~</code> as path to home dir, use <code>$HOME</code> instead.
In .zshrc file, instead of adding this:
<pre><code>export PATH=$PATH:~/.composer/vendor/bin
</code></pre>
Add this and the path will resolve:
<pre><code>export PATH=$PATH:$HOME/.composer/vendor/bin
</code></pre>

I am trying to set up Laravels Valet (<a href="https://laravel.com/docs/5.2/valet" rel="noreferrer">Valet is a Laravel development environment for Mac</a>). Everything works until it comes to the command "valet install". This command must be executed in terminal. But I got the error "command not found". Any ideas, why? Do I have to update my PATH or something else? 

I switched to OS X a few days ago. Before that, I was a windows user. So I am a total newbie.

Laravel "valet install" not found

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

我正在尝试建立Laravels ()。一切都正常工作，直到收到命令"valet“。此命令必须在终端中执行。但我得到了“命令找不到”的错误。有什么想法，为什么？我需要更新我的路径还是别的什么吗？几天前我换了OS。在那之前，我是一个窗口用户。所以我完全是个新手。

问找不到Laravel“代客安装”
EN

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问找不到Laravel“代客安装”EN

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问找不到Laravel“代客安装”
EN