JCIDE和pyapdutool
JCIDE和pyapdutool
提问于 2016-08-30 17:10:01
我用杀精写了个代码。当我想在gpshell中调试它时，我看到了以下消息：
Start jcvm_gp successfully.
Connect Simulator:eJava Token successfully.
>> /card -a ""
ATR=3B 70 13 00 00
>> 00 A4 04 00 00
<< .. 90 00
>> set-key 255/1/DES-ECB/404142434445464748494A4B4C4D4E4F 255/2/DES-ECB/404142434445464748494A4B4C4D4E4F 255/3/DES-ECB/404142434445464748494A4B4C4D4E4F
>> init-update 255
<< ..90 00
>> ext-auth
<< ..90 00
>> upload
<< .. 90 00
>> install A000000308 A00000030800001000 A00000030800001000
<< .. 90 00
>> cardinfo
<< .. 90 00
Card Manager AID : A000000003000000
Card Manager state : OP_READY
Application: SELECTABLE (--------) A00000030800001000
Load File : LOADED (--------) A000000308
Module : A00000030800001000
1. Disconnect apdu port with JCVM successfully.
2. Connect JAVACOS Virtual Contact Reader 0 successfully. Connect JAVACOS Virtual Contactless Reader 1 successfully.
3. Connect CL port failed,IP:127.0.0.1:Port:0.
Reason: The requested address is not valid in its context.
4. Connect CB port successful,IP:127.0.0.1 Port:51836 T0但是，例如，当我编写命令/select时，Jcvm没有连接。
>> /select "A0 00 00 03 08 00 00 10 00"
>> 00 A4 04 00 09 A0 00 00 03 08 00 00 10 00 00
<< 00 00 Jcvm is not connected
Win32 Interface already disconnected.另外，我启用了pcsc接口，我使用了模拟器:ejavatoken，但是在调试模式下的一些时间，它是连接的PyAPDUTool，但有时没有。每个人都能帮我吗？
回答 1
页面原文内容由Stack Overflow提供。腾讯云小微IT领域专用引擎提供翻译支持
原文链接：
https://stackoverflow.com/questions/39233353
复制相关文章
相似问题
腾讯云开发者
