blocks|key|875704|text|ESLint可能没有给出反馈的原因有几个。ESLint将首先在项目中查找您的配置文件，如果它在那里找不到.eslintrc.json，它将查找全局配置。就个人而言，我只在每个项目中安装ESLint，并根据每个项目创建一个配置。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|875705|你没有得到反馈的第二个原因是为了得到反馈，你必须在.eslintrc.json中定义你的衬里规则。如果没有规则，或者您没有安装插件，那么您必须定义它们。|875706|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

There are a few reasons that ESLint may not be giving you feedback. ESLint is going to look for your configuration file first in your project and if it can't find a .eslintrc.json there it will look for a global configuration. Personally, I only install ESLint in each project and create a configuration based off of each project.

The second reason why you aren't getting feedback is that to get the feedback you have to define your linting rules in the .eslintrc.json. If there are no rules there, or you have no plugins installed then you have to define them.

blocks|key|2171708|text|如果您使用的是ESLint的全局安装，则配置中使用的任何插件也必须是全局安装的。就像本地安装一样明智。如果您已经在本地安装并在本地正确配置，但eslint无法工作，请尝试重新启动IDE。这就发生在我和VScode身上。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2171709|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

If you are using a global installation of ESLint, any plugins used in your configuration must also be installed globally. Like wise for local install.
if u have installed locally and properly configured locally, yet eslint isn't working, try restarting your IDE.
This just happened to me with VScode.

blocks|key|2171756|text|我在windows上也有类似的问题，但有时使用eslint+(在vscode中)有时不起作用。后来我意识到，过了一段时间，它就可以正常工作了。它与这个问题有关：eslint服务器需要3-5分钟才能启用。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|2171757|设置环境变量NO_UPDATE_NOTIFIER=1解决了这一问题|style|CODE|2171758|entityMap|0|LINK|mutability|MUTABLE|url|https://github.com/Microsoft/vscode-eslint/issues/440^0|28|L|0|0|6|K|0^^$0|@$1|2|3|4|5|6|7|P|8|@]|9|@$A|Q|B|R|1|S]]|C|$]]|$1|D|3|E|5|6|7|T|8|@$A|U|B|V|F|G]]|9|@]|C|$]]|$1|H|3|-4|5|6|7|W|8|@]|9|@]|C|$]]]|I|$J|$5|K|L|M|C|$N|O]]]]

I had similar problem on windows, however sometimes eslint worked (in vscode) sometimes not. Later I realized that it works fine after a while. It was related to this issue: <a href="https://github.com/Microsoft/vscode-eslint/issues/440" rel="nofollow noreferrer">eslint server takes ~3-5 minutes until available</a>
Setting enviroment variable <code>NO_UPDATE_NOTIFIER=1</code> solved the problem

blocks|key|875760|text|如果您已经用.eslintrc和.eslintignore在本地项目根中定义了规则，那么我将给出响应。安装VSCode+Eslint扩展后，需要在settings.json中为vscode做几个配置|type|unstyled|depth|inlineStyleRanges|entityRanges|data|875761|eslint.enable:+true|offset|length|style|CODE|875762|eslint.nodePath:+<directory+where+your+extensions+available>|875763|将eslint本地安装为一个项目依赖项是此工作的最后一个要素。考虑不要将eslint安装为全局的，这可能会与您本地安装的包发生冲突。|875764|entityMap^0|0|0|J|0|0|1O|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|O|8|@$D|P|E|Q|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|R|8|@$D|S|E|T|F|G]]|9|@]|A|$]]|$1|J|3|K|5|6|7|U|8|@]|9|@]|A|$]]|$1|L|3|-4|5|6|7|V|8|@]|9|@]|A|$]]]|M|$]]

I'm giving the response assuming that you have already defined rules in you local project root with .eslintrc and .eslintignore.
After Installing VSCode Eslint Extension several configurations which need to do in settings.json for vscode

<code>eslint.enable: true</code> 
<code>eslint.nodePath: &lt;directory where your extensions available&gt;</code>

Installing eslint local as a project dependency is the last ingredient for this to work. consider not to install eslint as global which could conflict with your local installed package.

blocks|key|875797|text|我也遇到了类似的问题:+eslint说它正在“..not验证任何文件”，但是VS代码问题控制台中没有任何报告。但是，在将VS代码升级到最新版本(1.32.1)并重新启动之后，eslint开始工作。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|875798|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I had a similar problem with eslint saying it was '..not validating any files yet', but nothing was reported in the VS Code problems console. However after upgrading VS Code to the latest version (1.32.1) and restarting, eslint started working.

blocks|key|2210782|text|在我的例子中，由于我使用的是TypeScript和React，所以修复方法只是告诉ESLint也验证这些文件。这需要在您的用户设置中进行：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2210783|"eslint.validate":+[+"javascript",+"javascriptreact",+"html",+"typescriptreact"+],|code-block|syntax|javascript|2210784|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

In my case, since I was using TypeScript with React, the fix was simply to tell ESLint to also validate these files. This needs to go in your user settings:

<pre><code>"eslint.validate": [ "javascript", "javascriptreact", "html", "typescriptreact" ],
</code></pre>

blocks|key|2171856|text|在我的例子中，它无法工作，因为我只在项目中添加了monorepo的一个文件夹，尽管我已经配置了package.json和扩展。当我将整个项目(其中包含package.json文件)添加到VS代码中时，我才开始工作。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2171857|entityMap^0|1B|C|23|C|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|M|8|@]|D|@]|E|$]]]|G|$]]

In my case, it wasn't working because I had added only one folder of the monorepo to the project, even though I had the <code>package.json</code> and the extension configured. I worked only when I added the whole project (which contained the <code>package.json</code> file) to the VS Code.

blocks|key|875860|text|在我的例子中，我没有在VSCode中安装he+VSCode扩展，这引起了问题。做了然后又开始工作了。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|875861|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

In my case, I had not installed he ESLint extension in VSCode, which was causing issue. Did it and it started working again.

blocks|key|2210837|text|在我的示例中，ESLint在我的工作区中被禁用。我必须在vscode扩展设置中启用它。|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|2210838|entityMap^0|7|6|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|K|8|@]|D|@]|E|$]]]|G|$]]

In my case ESLint was disabled in my workspace. I had to enable it in vscode extensions settings.

blocks|key|2171900|text|重新启动VSCode为我工作。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2171901|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

blocks|key|2171943|text|在我的例子中，将eslint验证设置为："eslint.validate"："javascript“、"javascriptreact”、"html“、"typescriptreact”，完成了这项工作。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2171944|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

In my case setting eslint validate to :
"eslint.validate": [ "javascript", "javascriptreact", "html", "typescriptreact" ],
did the job.

blocks|key|2172006|text|由于您能够通过命令行成功地链接，所以这个问题很可能发生在ESLint+插件的配置中。|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|2172007|假设扩展已正确安装，请查看项目(工作区)和用户(全局)定义的+ESLint相关的配置属性。|2172008|在您的特定情况下，有几件事情可能会被错误配置；对我来说，在另一个项目中使用了JavaScript之后，它被禁用了，我的全局settings.json最终发现如下：|2172009|"eslint.validate":+[
++{+"language":+"typescript",+"autoFix":+true+}
+]|code-block|syntax|javascript|2172010|从这里开始，这是一个简单的解决方案：|2172011|"eslint.validate":+[
++{+"language":+"javascript",+"autoFix":+true+},
++{+"language":+"typescript",+"autoFix":+true+}
]|2172012|这是如此普遍，以至于有人直接写了一篇关于ESLint不在VS代码中工作的博客文章。我只想添加，在重写本地工作区配置之前检查您的全局用户settings.json。|2172013|entityMap|0|LINK|mutability|MUTABLE|url|https://dev.to/pixari/eslint-not-working-in-vs-code-5g4d^0|Z|2|0|U|E|0|0|0|0|0|K|F|0|0^^$0|@$1|2|3|4|5|6|7|12|8|@$9|13|A|14|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|15|8|@$9|16|A|17|B|C]]|D|@]|E|$]]|$1|H|3|I|5|6|7|18|8|@]|D|@]|E|$]]|$1|J|3|K|5|L|7|19|8|@]|D|@]|E|$M|N]]|$1|O|3|P|5|6|7|1A|8|@]|D|@]|E|$]]|$1|Q|3|R|5|L|7|1B|8|@]|D|@]|E|$M|N]]|$1|S|3|T|5|6|7|1C|8|@]|D|@$9|1D|A|1E|1|1F]]|E|$]]|$1|U|3|-4|5|6|7|1G|8|@]|D|@]|E|$]]]|V|$W|$5|X|Y|Z|E|$10|11]]]]

Since you are able to successfully lint via command line, the issue is most likely in the configuration of the ESLint plugin.

Assuming the extension is properly installed, check out all ESLint related config properties in both project (workspace) and user (global) defined settings.json.

There are a few things that could be misconfigured in your particular case; for me it was JavaScript disabled after working with TypeScript in another project and my global settings.json ended up looking following:

<pre><code>"eslint.validate": [
 { "language": "typescript", "autoFix": true }
 ]
</code></pre>

From here it was a simple fix:

<pre><code>"eslint.validate": [
 { "language": "javascript", "autoFix": true },
 { "language": "typescript", "autoFix": true }
]
</code></pre>

This is so common that someone wrote a straight forward blog post about <a href="https://dev.to/pixari/eslint-not-working-in-vs-code-5g4d" rel="noreferrer">ESLint not working in VS Code</a>. I'd just add, check your global user settings.json before overriding the local workspace config.

blocks|key|876018|text|配置工作目录为我解决了这个问题，因为我在同一个窗口中有多个具有自己的.eslintrc文件开放端的项目。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|876019|把这个放进你的.vscode/settings.json|876020|"eslint.workingDirectories":+[
++++"./backend",+
++++"./frontend"
],|code-block|syntax|javascript|876021|感谢github上的这个家伙：https://github.com/microsoft/vscode-eslint/issues/696#issuecomment-542592372|876022|PS:用于列出除.eslintrc以外所有包含/node_modules的子目录的有用命令：|876023|find+.+.eslintrc+%7C+grep+.eslintrc+%7C+grep+-v+node_modules|876024|entityMap|0|LINK|mutability|MUTABLE|url|https://github.com/microsoft/vscode-eslint/issues/696#issuecomment-542592372^0|Y|9|0|7|L|0|0|F|24|0|0|8|9|0|0|1K|0^^$0|@$1|2|3|4|5|6|7|10|8|@$9|11|A|12|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|13|8|@$9|14|A|15|B|C]]|D|@]|E|$]]|$1|H|3|I|5|J|7|16|8|@]|D|@]|E|$K|L]]|$1|M|3|N|5|6|7|17|8|@]|D|@$9|18|A|19|1|1A]]|E|$]]|$1|O|3|P|5|6|7|1B|8|@$9|1C|A|1D|B|C]]|D|@]|E|$]]|$1|Q|3|R|5|6|7|1E|8|@$9|1F|A|1G|B|C]]|D|@]|E|$]]|$1|S|3|-4|5|6|7|1H|8|@]|D|@]|E|$]]]|T|$U|$5|V|W|X|E|$Y|Z]]]]

configuring working directories solved it for me, since I had multiple projects with own <code>.eslintrc</code> files openend in the same window.

Put this in your <code>.vscode/settings.json</code>

<pre><code>"eslint.workingDirectories": [
 "./backend", 
 "./frontend"
],
</code></pre>

thanks to this guy on github: <a href="https://github.com/microsoft/vscode-eslint/issues/696#issuecomment-542592372" rel="noreferrer">https://github.com/microsoft/vscode-eslint/issues/696#issuecomment-542592372</a>

PS: useful command to list all subdirectories containing an <code>.eslintrc</code> except /node_modules:

<code>find . .eslintrc | grep .eslintrc | grep -v node_modules</code>

blocks|key|2210973|text|我使用更漂亮的格式化程序和ESLint与代码扩展一起用于代码的链接和格式化。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2210974|​|2210975|📷|atomic|offset|length|2210976|2210977|2210978|2210979|2210980|现在使用给定的命令安装一些软件包，如果需要更多的软件包，它们将在终端中显示安装命令为错误，请也安装它们。|2210981|npm+i+eslint+prettier+eslint@%5E5.16.0+eslint-config-prettier+eslint-plugin-prettier+eslint-config-airbnb+eslint-plugin-node+eslint-plugin-import+eslint-plugin-jsx-a11y+eslint-plugin-react+eslint-plugin-react-hooks@%5E2.5.0+--save-dev|code-block|syntax|javascript|2210982|现在，在您的项目主目录中创建一个新的文件名.prettierrc，使用该文件您可以配置更漂亮的扩展名的设置，我的设置如下：|style|BOLD|2210983|{
++"singleQuote":+true
}|2210984|至于ESlint，您可以根据您的要求进行配置，我建议您到Eslint网站查看规则(https://eslint.org/docs/rules/)。|2210985|现在，在项目主目录中创建一个文件名.eslintrc.json，使用该文件您可以配置eslint，我的配置如下：|2210986|{
++"extends":+["airbnb",+"prettier",+"plugin:node/recommended"],
++"plugins":+["prettier"],
++"rules":+{
++++"prettier/prettier":+"error",
++++"spaced-comment":+"off",
++++"no-console":+"warn",
++++"consistent-return":+"off",
++++"func-names":+"off",
++++"object-shorthand":+"off",
++++"no-process-exit":+"off",
++++"no-param-reassign":+"off",
++++"no-return-await":+"off",
++++"no-underscore-dangle":+"off",
++++"class-methods-use-this":+"off",
++++"prefer-destructuring":+["error",+{+"object":+true,+"array":+false+}],
++++"no-unused-vars":+["error",+{+"argsIgnorePattern":+"req%7Cres%7Cnext%7Cval"+}]
++}
}|2210987|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://developer.qcloudimg.com/http-save/yehe-900000/fe606277ddc3d696970d092a0ec1081d.png|imageAlt|1|https://developer.qcloudimg.com/http-save/yehe-900000/cc26668d34ddff4fef4aabd28d1929fe.png|2|LINK|MUTABLE|url|https://eslint.org/docs/rules/^0|0|0|0|1|0|0|0|0|0|1|1|0|0|0|0|L|B|0|0|15|U|2|0|H|E|0|0^^$0|@$1|2|3|4|5|6|7|1L|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|1M|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|1N|8|@]|9|@$G|1O|H|1P|1|1Q]]|A|$]]|$1|I|3|C|5|6|7|1R|8|@]|9|@]|A|$]]|$1|J|3|C|5|6|7|1S|8|@]|9|@]|A|$]]|$1|K|3|E|5|F|7|1T|8|@]|9|@$G|1U|H|1V|1|1W]]|A|$]]|$1|L|3|C|5|6|7|1X|8|@]|9|@]|A|$]]|$1|M|3|N|5|6|7|1Y|8|@]|9|@]|A|$]]|$1|O|3|P|5|Q|7|1Z|8|@]|9|@]|A|$R|S]]|$1|T|3|U|5|6|7|20|8|@$G|21|H|22|V|W]]|9|@]|A|$]]|$1|X|3|Y|5|Q|7|23|8|@]|9|@]|A|$R|S]]|$1|Z|3|10|5|6|7|24|8|@]|9|@$G|25|H|26|1|27]]|A|$]]|$1|11|3|12|5|6|7|28|8|@$G|29|H|2A|V|W]]|9|@]|A|$]]|$1|13|3|14|5|Q|7|2B|8|@]|9|@]|A|$R|S]]|$1|15|3|-4|5|6|7|2C|8|@]|9|@]|A|$]]]|16|$17|$5|18|19|1A|A|$1B|1C|1D|-4]]|1E|$5|18|19|1A|A|$1B|1F|1D|-4]]|1G|$5|1H|19|1I|A|$1J|1K]]]]

I use Use Prettier Formatter and ESLint VS Code extension together for code linting and formating.

<a href="https://i.stack.imgur.com/syB7n.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/syB7n.png" alt="enter image description here"></a>

<a href="https://i.stack.imgur.com/dIIqG.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/dIIqG.png" alt="enter image description here"></a>

now install some packages using given command, if more packages required they will show with installation command as an error in the terminal for you, please install them also.

<pre><code>npm i eslint prettier eslint@^5.16.0 eslint-config-prettier eslint-plugin-prettier eslint-config-airbnb eslint-plugin-node eslint-plugin-import eslint-plugin-jsx-a11y eslint-plugin-react eslint-plugin-react-hooks@^2.5.0 --save-dev
</code></pre>

now create a new file name .prettierrc in your project home directory, using this file you can configure settings of the prettier extension, my settings are below:

<pre><code>{
 "singleQuote": true
}
</code></pre>

now as for the ESlint you can configure it according to your requirement, I am advising you to go Eslint website see the rules (<a href="https://eslint.org/docs/rules/" rel="nofollow noreferrer">https://eslint.org/docs/rules/</a>)

Now create a file name .eslintrc.json in your project home directory, using that file you can configure eslint, my configurations are below:

<pre><code>{
 "extends": ["airbnb", "prettier", "plugin:node/recommended"],
 "plugins": ["prettier"],
 "rules": {
 "prettier/prettier": "error",
 "spaced-comment": "off",
 "no-console": "warn",
 "consistent-return": "off",
 "func-names": "off",
 "object-shorthand": "off",
 "no-process-exit": "off",
 "no-param-reassign": "off",
 "no-return-await": "off",
 "no-underscore-dangle": "off",
 "class-methods-use-this": "off",
 "prefer-destructuring": ["error", { "object": true, "array": false }],
 "no-unused-vars": ["error", { "argsIgnorePattern": "req|res|next|val" }]
 }
}
</code></pre>

blocks|key|2172150|text|对我来说，当ESLint显示某些提示时，我意外地禁用了它。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2172151|下面的步骤为我修复了它|2172152|Shift+%2B+Command+%2B+P并选择ESLint:+Disabled+ESLint|ordered-list-item|offset|length|style|CODE|2172153|关闭vscode|2172154|Shift+%2B+Command+%2B+P并选择ESLint:+Show+Output+Channel|2172155|entityMap^0|0|0|0|J|M|N|0|0|0|J|M|R|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|R|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|S|8|@$G|T|H|U|I|J]|$G|V|H|W|I|J]]|9|@]|A|$]]|$1|K|3|L|5|F|7|X|8|@]|9|@]|A|$]]|$1|M|3|N|5|F|7|Y|8|@$G|Z|H|10|I|J]|$G|11|H|12|I|J]]|9|@]|A|$]]|$1|O|3|-4|5|6|7|13|8|@]|9|@]|A|$]]]|P|$]]

For me, i did accidentally disable ESLint when some prompt was shown by it.
Doing below steps fixed it for me
<ol>
<li><code>Shift + Command + P</code> and select <code>ESLint: Disabled ESLint</code></li>
<li>Close vscode</li>
<li><code>Shift + Command + P</code> and select <code>ESLint: Show Output Channel</code></li>
</ol>

blocks|key|2211024|text|转到您的settings.json文件，添加以下内容，并修复eslint.nodepath。根据你自己的喜好量身定做。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2211025|+//+PERSONAL
++"editor.codeActionsOnSaveTimeout":+2000,
++"editor.codeActionsOnSave":+{
++++"source.fixAll":+true
++},
++"editor.fontSize":+16,
++"editor.formatOnSave":+true,
++"explorer.confirmDragAndDrop":+true,
++"editor.tabSize":+2,
++"eslint.codeAction.showDocumentation":+{
++++"enable":+true
++},
++"eslint.nodePath":+"C:\\{path}",
++"eslint.workingDirectories":+["./backend",+"./frontend"],|code-block|syntax|javascript|2211026|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

Go to your settings.json file, add the following and, fix the eslint.nodepath. Tailor it to your own preferences.
<pre><code> // PERSONAL
 &quot;editor.codeActionsOnSaveTimeout&quot;: 2000,
 &quot;editor.codeActionsOnSave&quot;: {
 &quot;source.fixAll&quot;: true
 },
 &quot;editor.fontSize&quot;: 16,
 &quot;editor.formatOnSave&quot;: true,
 &quot;explorer.confirmDragAndDrop&quot;: true,
 &quot;editor.tabSize&quot;: 2,
 &quot;eslint.codeAction.showDocumentation&quot;: {
 &quot;enable&quot;: true
 },
 &quot;eslint.nodePath&quot;: &quot;C:\\{path}&quot;,
 &quot;eslint.workingDirectories&quot;: [&quot;./backend&quot;, &quot;./frontend&quot;],
</code></pre>

blocks|key|876154|text|在我的例子中，我将.eslintrc.json文件放在.vscode文件夹中。一旦我把它移到根文件夹，ESLint就开始正常工作了。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|876155|entityMap^0|9|E|R|7|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|M|8|@]|D|@]|E|$]]]|G|$]]

In my case, I had the <code>.eslintrc.json</code> file inside the <code>.vscode</code> folder. Once I moved it out to the root folder, ESLint started working correctly.

blocks|key|2172179|text|您可以打开problem选项卡来检查是否存在ESLint权限请求。如果你看到它，试着点击灯泡并解决这个问题，它对我是有效的。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2172180|vscode终端窗口中的问题选项卡|2172181|祝你好运！|2172182|entityMap|0|LINK|mutability|MUTABLE|url|https://i.stack.imgur.com/UxRXp.png^0|5|7|0|0|H|0|0|0^^$0|@$1|2|3|4|5|6|7|R|8|@$9|S|A|T|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|U|8|@]|D|@$9|V|A|W|1|X]]|E|$]]|$1|H|3|I|5|6|7|Y|8|@]|D|@]|E|$]]|$1|J|3|-4|5|6|7|Z|8|@]|D|@]|E|$]]]|K|$L|$5|M|N|O|E|$P|Q]]]]

You can open <code>problem</code> tab to check there is an ESLint permission request or not. If you see it, try to click the lightbulb and fix the issue, it works for me.
<a href="https://i.stack.imgur.com/UxRXp.png" rel="nofollow noreferrer">problem tab in vscode terminal window</a>
wish you luck!

blocks|key|2211265|text|窗口用户在这里。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2211266|什么都试过了，没什么用。最后，用eslint删除..vscode/扩展名中的文件夹并重新安装！|2211267|C:\Users.vscode\extensions|blockquote|2211268|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|J|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|K|8|@]|9|@]|A|$]]|$1|G|3|-4|5|6|7|L|8|@]|9|@]|A|$]]]|H|$]]

Windows user here.
Tried everything, nothing worked. Finally removing the folder with eslint in .vscode/extensions and reinstalling fixed!
<blockquote>
C:\Users&lt;user&gt;.vscode\extensions
</blockquote>

blocks|key|876205|text|如果您正在使用Yarn版本2，这可能是罪魁祸首。对我来说，一旦我运行了yarn+set+version+classic和yarn+install，一切又开始工作了。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|876206|entityMap^0|Z|O|1O|C|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|M|8|@]|D|@]|E|$]]]|G|$]]

If you are using Yarn version 2, it might be the culprit. For me, once I ran <code>yarn set version classic</code> and <code>yarn install</code> everything started working again.

blocks|key|2211368|text|我也有过同样的问题。启用了ESLint扩展名，.eslintrc文件有一些规则，但是VS代码没有为我的代码显示任何自动修复。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2211369|问题出在我的文件夹结构上，就像这样|2211370|-workspace-folder
++-client
++++-node_modules
++++-src
++++-.eslintrc.json
++++-package.json
++++-...other+files|code-block|syntax|javascript|2211371|在将文件夹结构更改为下面的示例之后，使用delete包-lock.json并重新安装所有dep后，VS代码开始显示es+lint错误。|2211372|-workspace-folder
+++-node_modules
+++-src
+++-.eslintrc.json
+++-package.json
+++-...other+files|2211373|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|P|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|Q|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|R|8|@]|9|@]|A|$]]|$1|K|3|L|5|F|7|S|8|@]|9|@]|A|$G|H]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

I had the same issue. ESLint extension was enabled and .eslintrc file had some rules but VS Code did not show any autofix for my code.
The problem was in my folder structure, it was something like that
<pre><code>-workspace-folder
 -client
 -node_modules
 -src
 -.eslintrc.json
 -package.json
 -...other files
</code></pre>
After changing folder structure to the like below example, with the delete package-lock.json and reinstallation of all deps, VS code began to show es lint errors.
<pre><code>-workspace-folder
 -node_modules
 -src
 -.eslintrc.json
 -package.json
 -...other files
</code></pre>

blocks|key|876256|text|我也遇到了同样的问题:不工作。在.eslintrc.json文件中添加这些扩展名时，对我来说很好：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|876257|"extends":+[
++++++++"plugin:@angular-eslint/recommended",
++++++++"plugin:@angular-eslint/template/process-inline-templates",
++++++++"eslint:recommended",
++++++++"plugin:@typescript-eslint/recommended"
++++++],|code-block|syntax|javascript|876258|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

I get the same problem of eslint not working. When adding these extensions in .eslintrc.json file, it works fine for me :
<pre><code>&quot;extends&quot;: [
 &quot;plugin:@angular-eslint/recommended&quot;,
 &quot;plugin:@angular-eslint/template/process-inline-templates&quot;,
 &quot;eslint:recommended&quot;,
 &quot;plugin:@typescript-eslint/recommended&quot;
 ],
</code></pre>

blocks|key|2211453|text|在由Dirk安装Eslint包和/或VS代码扩展之后，按照编码约定创建.eslintrc.js配置文件。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2211454|然后，在ESLint设置中启用所有VSCode配置，如下所示：|2211455|根据操作系统或搜索“设置”按快捷键Ctrl+%2B或Command+%2B|unordered-list-item|2211456|在搜索栏中键入@ext:dbaeumer.vscode-eslint|offset|length|style|BOLD|2211457|勾选以下复选框|2211458|Eslint:调试|2211459|Eslint:启用|2211460|Eslint:格式启用|2211461|Eslint:启用Lint任务|2211462|2211463|快乐玲婷|2211464|entityMap^0|0|0|0|7|R|0|1|1|1|1|1|0|0^^$0|@$1|2|3|4|5|6|7|11|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|12|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|13|8|@]|9|@]|A|$]]|$1|G|3|H|5|F|7|14|8|@$I|15|J|16|K|L]]|9|@]|A|$]]|$1|M|3|N|5|F|7|17|8|@]|9|@]|A|$]]|$1|O|3|P|5|F|7|18|8|@]|9|@]|A|$]]|$1|Q|3|R|5|F|7|19|8|@]|9|@]|A|$]]|$1|S|3|T|5|F|7|1A|8|@]|9|@]|A|$]]|$1|U|3|V|5|F|7|1B|8|@]|9|@]|A|$]]|$1|W|3|-4|5|6|7|1C|8|@]|9|@]|A|$]]|$1|X|3|Y|5|6|7|1D|8|@]|9|@]|A|$]]|$1|Z|3|-4|5|6|7|1E|8|@]|9|@]|A|$]]]|10|$]]

After installing the Eslint npm package and/or VS Code Extension by Dirk baeumer, Create .eslintrc.js configuration file as per your coding conventions.
Then, Enable all ESLint configurations in VSCode settings as follows:
<ul>
<li>Pressing shortcut key Ctrl + or Command + based on your OS OR search &quot;Settings&quot;</li>
<li>Type @ext:dbaeumer.vscode-eslint in your Search bar</li>
<li>Tick mark the following checkboxes
<ul>
<li>Eslint: Debug</li>
<li>Eslint: Enable</li>
<li>Eslint: Format Enable</li>
<li>Eslint: Lint Task Enable</li>
</ul>
</li>
</ul>
Happy Linting

blocks|key|2211474|text|我通过重新启动ESLint服务器解决了这个问题。您可以通过打开Ctrl+%2B+P菜单来做到这一点。然后您可以输入>+ESLint:+Restart+ESLint+Server。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2211475|entityMap^0|V|4|12|1|1J|V|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]|$9|M|A|N|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|O|8|@]|D|@]|E|$]]]|G|$]]

I resolved the issue by restarting the ESLint Server. You can do this by opening up the <code>Ctrl</code> + <code>P</code> menu. Then you can enter <code>&gt; ESLint: Restart ESLint Server</code>.

blocks|key|2172569|text|在我的例子中，我必须在ESLint中启用VSCode中的“始终显示状态”设置：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2172570|​|2172571|📷|atomic|offset|length|2172572|2172573|然后，在VSCode中开始立即显示起衬里结果。|2172574|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://developer.qcloudimg.com/http-save/yehe-900000/4c764abf81bb359c67f361cda4dba19c.png|imageAlt^0|0|0|0|1|0|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|V|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|W|8|@]|9|@$G|X|H|Y|1|Z]]|A|$]]|$1|I|3|C|5|6|7|10|8|@]|9|@]|A|$]]|$1|J|3|K|5|6|7|11|8|@]|9|@]|A|$]]|$1|L|3|-4|5|6|7|12|8|@]|9|@]|A|$]]]|M|$N|$5|O|P|Q|A|$R|S|T|-4]]]]

In my case, I had to enable the ESLint &quot;Always Show Status&quot; setting in VSCode:
<a href="https://i.stack.imgur.com/hLvUn.png" rel="noreferrer"><img src="https://i.stack.imgur.com/hLvUn.png" alt="enter image description here" /></a>
Then linting results started showing up immediately in VSCode.

blocks|key|2211500|text|.eslintrc.js文件有一个错误。更具体地说，我试图以错误的方式添加一条规则。一旦我取消了法尔赛规则，一切都马上就好了。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2211501|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

The .eslintrc.js file had a typo . More specifically I tried to add a rule in a wrong way . Once I removed the falsey rule everything was working fine immediately .

blocks|key|2172605|text|在我的例子中，我遵循https://eslint.org/docs/user-guide/getting-started#installation-and-usage设置es-lint。但安装后就不起作用了。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|2172606|修复:但只要重新启动vs代码，我就解决了这个问题。|2172607|entityMap|0|LINK|mutability|MUTABLE|url|https://eslint.org/docs/user-guide/getting-started#installation-and-usage^0|A|21|0|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@$A|O|B|P|1|Q]]|C|$]]|$1|D|3|E|5|6|7|R|8|@]|9|@]|C|$]]|$1|F|3|-4|5|6|7|S|8|@]|9|@]|C|$]]]|G|$H|$5|I|J|K|C|$L|M]]]]

In my case, I followed <a href="https://eslint.org/docs/user-guide/getting-started#installation-and-usage" rel="nofollow noreferrer">https://eslint.org/docs/user-guide/getting-started#installation-and-usage</a> to setup the es-lint. But after the installation it's wasn't working.
Fix: But just restarting the vs-code solved the problem for me.

blocks|key|2172616|text|在我的示例中，ESLint已正确安装和启用，并在另一个设置相同的工作区中工作。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2172617|有帮助的是在它不工作的工作区中禁用扩展，重新加载VSCode，然后启用扩展。然后马上就开始工作了。|2172618|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

In my case ESLint was properly installed and enabled and working in another workspace with identical settings.
What helped was to disable the extension in the workspace where it was not working, reload VSCode and then enable the extension back. Then it immediately started working.

blocks|key|876455|text|对我来说，最新版本的eslint不能在我的所有包中正确地使用Visual代码，所以我不得不安装一个早期的全局版本：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|876456|npm+i+-g+eslint@7.32.0|offset|length|style|CODE|876457|J|876458|entityMap^0|0|0|M|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|M|8|@$D|N|E|O|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|P|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|K|$]]

For me, the latest version of eslint does not work correctly with Visual Studio code in all my packages, so I had to install an earlier global version:
<code>npm i -g eslint@7.32.0</code>
J

blocks|key|2211620|text|对我来说，使用nvm安装节点是个问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2211621|在终端中，运行npm+root+-g获取全局node_modules安装文件夹。它应该看起来像/Users/{username}/.nvm/versions/node/v16.12.0/lib/node_modules+(对于mac)。|offset|length|style|CODE|2211622|然后，在ESLint的设置中，编辑节点路径以指向这个node_modules位置。|2211623|entityMap^0|0|7|B|1B|1Q|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|M|8|@$D|N|E|O|F|G]|$D|P|E|Q|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|R|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|S|8|@]|9|@]|A|$]]]|K|$]]

For me, it was a problem with using nvm to install node.
In a terminal, run <code>npm root -g</code> to get the global node_modules install folder. It should look something like <code>/Users/{username}/.nvm/versions/node/v16.12.0/lib/node_modules</code> (for mac).
Then, in the settings for ESLint, edit the Node Path to point to this node_modules location.

ESLint is not working for me in VS Code. I have the plugin installed in VS Code, and ESLint itself as a developer dependency in my package.json, which I have installed as well.

I modified the following option in the VS Code User Settings:

<pre><code>{
 "eslint.options": { "configFile": "C:/mypath" }
}
</code></pre>

I have use the command <code>eslint --init</code> to add the basic <code>.eslintrc.json</code> to the main directory of my package. 

Other people were able to get ESLint feedback from VS Code using the exact same package with the exact same ESLint config file. 

I have received no feedback of any kind when directly breaking multiple rules that were all included in the recommended rule set that is by default inside of the <code>.eslintrc.json</code> file.

What am I missing?

Edit: I have tested using ESLint via command line, and everything worked as expected, with the errors found where they should have, however, these same errors never showed up in VS Code. The issue seems to be on VS Code's side and not ESLint.

ESLint not working in VS Code?

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

ESLint不在VS代码中为我工作。我在VS代码中安装了插件，ESLint本身作为开发人员的依赖项安装在我的package.json中，我也安装了该插件。我在VS代码用户设置中修改了以下选项：{  "eslint.options": { "configFile": "C:/mypath" }}我使用命令eslint -...

问ESLint没有在VS代码中工作？
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问ESLint没有在VS代码中工作？EN