blocks|key|2271203|text|你应该用C:\Program+Files\Java\jdk1.8.0_12.来设置它|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|CODE|entityRanges|data|2271204|不需要\bin。|2271205|entityMap^0|4|X|4|X|0|3|4|3|4|0^^$0|@$1|2|3|4|5|6|7|K|8|@$9|L|A|M|B|C]|$9|N|A|O|B|D]]|E|@]|F|$]]|$1|G|3|H|5|6|7|P|8|@$9|Q|A|R|B|C]|$9|S|A|T|B|D]]|E|@]|F|$]]|$1|I|3|-4|5|6|7|U|8|@]|E|@]|F|$]]]|J|$]]

You should set it with <code>C:\Program Files\Java\jdk1.8.0_12</code>.

<code>\bin</code> is not required.

blocks|key|2271234|text|JAVA_HOME应该指向主jdk目录，而不是jdk/bin目录。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2271235|您需要像这样设置JAVA_HOME：|2271236|JAVA_HOME="C:\Program+Files\Java\jdk1.8.0_131"|code-block|syntax|javascript|2271237|entityMap^0|0|9|N|7|0|8|9|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@$9|P|A|Q|B|C]|$9|R|A|S|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|T|8|@$9|U|A|V|B|C]]|D|@]|E|$]]|$1|H|3|I|5|J|7|W|8|@]|D|@]|E|$K|L]]|$1|M|3|-4|5|6|7|X|8|@]|D|@]|E|$]]]|N|$]]

<code>JAVA_HOME</code> should point to the home jdk directory, and not to <code>jdk/bin</code> directory.

You need to set the <code>JAVA_HOME</code> like this:

<pre><code>JAVA_HOME="C:\Program Files\Java\jdk1.8.0_131"
</code></pre>

blocks|key|942397|text|删除\bin，并在末尾移除;。重新启动cmd并运行之后。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|942398|entityMap^0|2|4|D|1|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|M|8|@]|D|@]|E|$]]]|G|$]]

Remove the <code>\bin</code>, and also remove the <code>;</code> at the end. After restart the cmd and run.

blocks|key|2233894|text|尝试以下几点：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2233895|从\bin路径中删除JAVA_HOME。|unordered-list-item|offset|length|style|CODE|2233896|打开新的命令行窗口。|2233897|以管理员身份运行您的命令。|2233898|entityMap^0|0|1|4|A|9|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@$E|Q|F|R|G|H]|$E|S|F|T|G|H]]|9|@]|A|$]]|$1|I|3|J|5|D|7|U|8|@]|9|@]|A|$]]|$1|K|3|L|5|D|7|V|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|W|8|@]|9|@]|A|$]]]|N|$]]

Try the following:

<ul>
<li>Remove <code>\bin</code> from <code>JAVA_HOME</code> path.</li>
<li>Open new command line window.</li>
<li>Run your command as an administrator.</li>
</ul>

blocks|key|2233926|text|在窗口10上，问题在于分号;。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2233927|转到edit+the+system+environment+variables并删除JAVA_HOME值C:\Program+Files\Java\jdk1.8.0_144末尾的分号|2233928|换句话说，将这个C:\Program+Files\Java\jdk1.8.0_12;转换为C:\Program+Files\Java\jdk1.8.0_12|2233929|您可能必须删除Windows对话框中的条目并创建一个新条目。如果您有多个条目并获得更大的形式视图，那么即使您只剩下一个条目，Windows也会在每个条目的末尾自动插入一个;。|2233930|entityMap|0|LINK|mutability|MUTABLE|url|https://i.stack.imgur.com/9XNz3.png^0|D|1|0|2|11|16|9|1G|Y|0|8|Y|19|X|0|2D|1|18|4|0|0^^$0|@$1|2|3|4|5|6|7|T|8|@$9|U|A|V|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|W|8|@$9|X|A|Y|B|C]|$9|Z|A|10|B|C]|$9|11|A|12|B|C]]|D|@]|E|$]]|$1|H|3|I|5|6|7|13|8|@$9|14|A|15|B|C]|$9|16|A|17|B|C]]|D|@]|E|$]]|$1|J|3|K|5|6|7|18|8|@$9|19|A|1A|B|C]]|D|@$9|1B|A|1C|1|1D]]|E|$]]|$1|L|3|-4|5|6|7|1E|8|@]|D|@]|E|$]]]|M|$N|$5|O|P|Q|E|$R|S]]]]

On Window 10, the problem was with the semicolon <code>;</code>.

Go to <code>edit the system environment variables</code> and delete the semicolon at the end of <code>JAVA_HOME</code> value <code>C:\Program Files\Java\jdk1.8.0_144</code>

In other words, convert this <code>C:\Program Files\Java\jdk1.8.0_12;</code> to <code>C:\Program Files\Java\jdk1.8.0_12</code>

You might have to delete your entry in the Windows Dialog and create a new one. If you ever had multiple entries and get the bigger <a href="https://i.stack.imgur.com/9XNz3.png" rel="noreferrer">Form view</a>, Windows automatically inserts a <code>;</code> at the end of each entry, even if you only have one entry left.

blocks|key|2271306|text|将JAVA_HOME设置为C：\ProgramFiles\Java\jdk1.8.0_172|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|2271307|以上JAVA_HOME值不要使用分号";“|2271308|要验证设置是否正确，请转到命令提示符检查C:.......>sdkmanager+--list。|2271309|一个完整的列表将出现，它将允许您现在它已成功保存。|2271310|否则，它将显示错误，JAVA_HOME路径没有正确设置。|2271311|entityMap^0|1|9|D|X|0|0|D|5|U|H|0|0|0^^$0|@$1|2|3|4|5|6|7|P|8|@$9|Q|A|R|B|C]|$9|S|A|T|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|U|8|@]|D|@]|E|$]]|$1|H|3|I|5|6|7|V|8|@$9|W|A|X|B|C]|$9|Y|A|Z|B|C]]|D|@]|E|$]]|$1|J|3|K|5|6|7|10|8|@]|D|@]|E|$]]|$1|L|3|M|5|6|7|11|8|@]|D|@]|E|$]]|$1|N|3|-4|5|6|7|12|8|@]|D|@]|E|$]]]|O|$]]

set JAVA_HOME as C:\Program Files\Java\jdk1.8.0_172

do not use semicolon ";" with above JAVA_HOME value

To verify that it is correctly set, Go to command prompt check for C:.......>sdkmanager --list

a complete list will appear that will let you now that it is successfully saved.

else it will show error that JAVA_HOME path is not correctly set.

blocks|key|2234037|text|JAVA_HOME应该是C:\Program+Files\Java\jdk1.8.0_172，不要在路径中包含分号(；)或bin。任何高于7的jdk版本都可以工作。另外，您还需要重新启动cmd。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2234038|entityMap^0|C|Y|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|K|8|@]|D|@]|E|$]]]|G|$]]

JAVA_HOME should be <code>C:\Program Files\Java\jdk1.8.0_172</code> don't include semi-colon(;) or bin in path. Any jdk version above 7 will work. Also, you need to re-start the cmd

blocks|key|2271453|text|我认为您需要从java路径的末尾删除“；”。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2271454|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

i think you need to remove the ';' from the end of the java path.

blocks|key|2234105|text|设置JAVA_HOME变量后，以管理员身份运行android|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2234106|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

After setting the JAVA_HOME variable, run android studio as administrator

blocks|key|2234111|text|您需要只使用C：\ProgramFiles\Java\jdk1.8.0_12进行设置。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2234112|并检查是否使用新的cmd。它将被更新|2234113|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

You need to set with only C:\Program Files\Java\jdk1.8.0_12.

And check with using new cmd. It will be updated

blocks|key|2234135|text|首先，尝试从路径中删除'\bin‘，并将主目录JAVA_HOME设置为:+JAVA_HOME+:C：\ProgramFiles\Java\jdk1.8.0_131|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2234136|第二更新系统路径：|offset|length|style|BOLD|2234137|在“系统变量”下的“环境变量”窗口中选择路径|ordered-list-item|2234138|点击“编辑…”|2234139|在“编辑环境变量”窗口中单击“新建”|2234140|键入%25JAVA_HOME%25\bin|2234141|第三，重新启动你的码头。|2234142|有关在windows中设置java路径，请参考链接。|2234143|entityMap|0|LINK|mutability|MUTABLE|url|https://javatutorial.net/set-java-home-windows-10^0|0|0|9|0|0|0|0|0|0|N|2|0|0^^$0|@$1|2|3|4|5|6|7|12|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|13|8|@$D|14|E|15|F|G]]|9|@]|A|$]]|$1|H|3|I|5|J|7|16|8|@]|9|@]|A|$]]|$1|K|3|L|5|J|7|17|8|@]|9|@]|A|$]]|$1|M|3|N|5|J|7|18|8|@]|9|@]|A|$]]|$1|O|3|P|5|J|7|19|8|@]|9|@]|A|$]]|$1|Q|3|R|5|6|7|1A|8|@]|9|@]|A|$]]|$1|S|3|T|5|6|7|1B|8|@]|9|@$D|1C|E|1D|1|1E]]|A|$]]|$1|U|3|-4|5|6|7|1F|8|@]|9|@]|A|$]]]|V|$W|$5|X|Y|Z|A|$10|11]]]]

First try removing the '\bin' from the path and set the home directory JAVA_HOME as below:
JAVA_HOME : C:\Program Files\Java\jdk1.8.0_131
Second Update System PATH:
<ol>
<li>In “Environment Variables” window under “System variables” select Path</li>
<li>Click on “Edit…”</li>
<li>In “Edit environment variable” window click “New”</li>
<li>Type in %JAVA_HOME%\bin</li>
</ol>
Third restart your docker.
Refer to the <a href="https://javatutorial.net/set-java-home-windows-10" rel="noreferrer">link</a> for setting the java path in windows.

blocks|key|942773|text|我在谷歌搜索android许可证问题时发现了这一点。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|942774|对于Linux，通过在最后添加以下一行来更新~/.bashrc+(或其他shell配置)文件：|offset|length|style|CODE|942775|JAVA_HOME=/usr/local/android-studio/jre|code-block|syntax|javascript|942776|注意：i通过遵循Linux正式安装指南(链接)安装了Android。|BOLD|942777|对于Windows，使用android到jre目录的路径，并使用正确的值更新环境变量。|942778|然后，运行flutter+doctor+--android-licenses并按y来检查未被接受的许可证。对每个许可证按y键。它将在许可文件的末尾询问Accept?+(y/N):。在你接受了所有未被接受的许可证之后，你应该看到：|942779|All+SDK+package+licenses+accepted|942780|entityMap|0|LINK|mutability|MUTABLE|url|https://developer.android.com/studio/install#linux^0|0|M|9|0|0|0|3|8|F|0|0|K|3|0|5|X|14|1|1O|1|23|E|0|0^^$0|@$1|2|3|4|5|6|7|13|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|14|8|@$D|15|E|16|F|G]]|9|@]|A|$]]|$1|H|3|I|5|J|7|17|8|@]|9|@]|A|$K|L]]|$1|M|3|N|5|6|7|18|8|@$D|19|E|1A|F|O]]|9|@$D|1B|E|1C|1|1D]]|A|$]]|$1|P|3|Q|5|6|7|1E|8|@$D|1F|E|1G|F|G]]|9|@]|A|$]]|$1|R|3|S|5|6|7|1H|8|@$D|1I|E|1J|F|G]|$D|1K|E|1L|F|G]|$D|1M|E|1N|F|G]|$D|1O|E|1P|F|G]]|9|@]|A|$]]|$1|T|3|U|5|J|7|1Q|8|@]|9|@]|A|$K|L]]|$1|V|3|-4|5|6|7|1R|8|@]|9|@]|A|$]]]|W|$X|$5|Y|Z|10|A|$11|12]]]]

I found this while googling the issue with android licences when installing Flutter.
For Linux, update Your <code>~/.bashrc</code> (or other shell config) file by adding this line at the end:
<pre><code>JAVA_HOME=/usr/local/android-studio/jre
</code></pre>
Note: I installed Android studio by following the <a href="https://developer.android.com/studio/install#linux" rel="nofollow noreferrer">official installation guide for Linux (link)</a>.
For Windows, use the android studio's path to the <code>jre</code> directory and update the environment variable with the right value.
Then, run <code>flutter doctor --android-licenses</code> and press <code>y</code> to review the licences which are not accepted.
Press <code>y</code> for each of the licences. It will ask <code>Accept? (y/N):</code> at the end of the license file.
After You accept all unaccepted licences, You should see:
<pre><code>All SDK package licenses accepted
</code></pre>

blocks|key|2271579|text|请删除/bin，甚至是分号；从JAVA_HOME中移除。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2271580|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Please remove /bin and even semi colon ; from JAVA_HOME to resolve.

blocks|key|2271617|text|检查系统变量中JAVA_HOME的重复条目。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2271618|在我的例子中，上面的答案都不起作用，但我有两个JAVA_HOME条目，删除一个条目起作用。|2271619|entityMap^0|7|9|0|N|9|0^^$0|@$1|2|3|4|5|6|7|J|8|@$9|K|A|L|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|M|8|@$9|N|A|O|B|C]]|D|@]|E|$]]|$1|H|3|-4|5|6|7|P|8|@]|D|@]|E|$]]]|I|$]]

Check for duplicate entries of <code>JAVA_HOME</code> in system variables.
In my case none of the above answers worked but I had two entries for <code>JAVA_HOME</code> and removing one worked.

blocks|key|2234324|text|我在用jenv|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2234325|在我的例子中，我使用的是jenv，但是没有设置java版本，所以jenv指向的路径实际上是一个Java安装。|2234326|当我运行echo+$JAVA_HOME时，它显示了/Users/username/.jenv/versions/system，并且没有这样的文件或目录。|2234327|设置java的版本|2234328|我只需做jenv+global+15+或+jenv+local+15，就可以指定我想要使用的版本，而JAVA_HOME在我重新运行echo+$JAVA_HOME时发生了变化。|BOLD|2234329|entityMap^0|3|4|0|0|4|F|P|11|0|0|4|E|L|D|1E|9|1T|F|J|1|0^^$0|@$1|2|3|4|5|6|7|Q|8|@$9|R|A|S|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|T|8|@]|D|@]|E|$]]|$1|H|3|I|5|6|7|U|8|@$9|V|A|W|B|C]|$9|X|A|Y|B|C]]|D|@]|E|$]]|$1|J|3|K|5|6|7|Z|8|@]|D|@]|E|$]]|$1|L|3|M|5|6|7|10|8|@$9|11|A|12|B|C]|$9|13|A|14|B|C]|$9|15|A|16|B|C]|$9|17|A|18|B|C]|$9|19|A|1A|B|N]]|D|@]|E|$]]|$1|O|3|-4|5|6|7|1B|8|@]|D|@]|E|$]]]|P|$]]

<h2>I was using <code>jenv</code></h2>
In my case, I was using jenv but did not set the java version, so the path that jenv was pointing actually a Java installation.
When I ran <code>echo $JAVA_HOME</code>, it showed <code>/Users/username/.jenv/versions/system</code>, and there was no such file or directory.
<h2>Set a version of java</h2>
I just had to do <code>jenv global 15</code> or <code>jenv local 15</code>, to specify what version I wanted to actually use, and <code>JAVA_HOME</code> changed when I re-ran <code>echo $JAVA_HOME</code>.

blocks|key|942870|text|在linux和mac上|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|942871|查找路径java+-XshowSettings:properties+-version+2>&1+>+/dev/null+%7C+grep+'java.home'|ordered-list-item|CODE|942872|结果(如java.home+=+/usr/lib/jvm/java-11-openjdk-amd64+)|942873|副本：/usr/lib/jvm/java-11-openjdk-amd64|942874|在配置bash文件中添加行(例如~/.zshrc)：export+JAVA_HOME=<resultFirstStep>|942875|entityMap^0|1|5|7|3|0|4|23|0|4|1A|0|3|Y|0|G|8|Q|Y|0^^$0|@$1|2|3|4|5|6|7|R|8|@$9|S|A|T|B|C]|$9|U|A|V|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|W|8|@$9|X|A|Y|B|I]]|D|@]|E|$]]|$1|J|3|K|5|H|7|Z|8|@$9|10|A|11|B|I]]|D|@]|E|$]]|$1|L|3|M|5|H|7|12|8|@$9|13|A|14|B|I]]|D|@]|E|$]]|$1|N|3|O|5|H|7|15|8|@$9|16|A|17|B|I]|$9|18|A|19|B|I]]|D|@]|E|$]]|$1|P|3|-4|5|6|7|1A|8|@]|D|@]|E|$]]]|Q|$]]

On linux and mac:
<ol>
<li>To find the path <code>java -XshowSettings:properties -version 2&gt;&amp;1 &gt; /dev/null | grep 'java.home'</code></li>
<li>result e.g. <code>java.home = /usr/lib/jvm/java-11-openjdk-amd64</code></li>
<li>copy: <code>/usr/lib/jvm/java-11-openjdk-amd64</code></li>
<li>Add line in your config bash file (e.g.<code>~/.zshrc</code>): <code>export JAVA_HOME=&lt;resultFirstStep&gt;</code></li>
</ol>

blocks|key|942895|text|我在vs代码中为为我工作的project.its设置了这样的代码|type|unstyled|depth|inlineStyleRanges|entityRanges|data|942896|JAVA_HOME="/Library/Java/JavaVirtualMachines/jdk1.8.0_321.jdk/Contents/Home"|code-block|syntax|javascript|942897|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

i have set like this in vs code for project.its working for me
<pre><code>JAVA_HOME=&quot;/Library/Java/JavaVirtualMachines/jdk1.8.0_321.jdk/Contents/Home&quot;
</code></pre>

blocks|key|2234368|text|在复制JDK路径时，排除其中的\bin文件夹。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2234369|例如：|2234370|C:\Program+\Java\JDK-15.0.2|blockquote|2234371|您的路径应该看起来像bin，您只需编辑它并删除\bin文件夹|2234372|C:\Program+\Java\JDK-15.0.2\bin|2234373|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|N|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|O|8|@]|9|@]|A|$]]|$1|G|3|H|5|6|7|P|8|@]|9|@]|A|$]]|$1|I|3|J|5|F|7|Q|8|@]|9|@]|A|$]]|$1|K|3|-4|5|6|7|R|8|@]|9|@]|A|$]]]|L|$]]

While copying the JDK PATH, exclude \bin folder in it.
e.g.
<blockquote>
C:\Program Files\Java\jdk-15.0.2
</blockquote>
your path should look like blow, you just need to edit it and remove \bin folder
<blockquote>
C:\Program Files\Java\jdk-15.0.2\bin
</blockquote>

I have set <code>JAVA_HOME</code> in my system <code>C:\Program Files\Java\jdk1.8.0_
131\bin;</code> and I am trying to run cordova command( cordova build ) on command prompt, but I'm getting the error bellow. I have tried all the ways, but not able to resolve this issue:

<blockquote>
 ERROR: JAVA_HOME is set to an invalid directory: C:\Program
 Files\Java\jdk1.8.0_ 131\bin;
</blockquote>

Please, set the <code>JAVA_HOME</code> variable in your environment to match the
location of your Java installation.

JAVA_HOME is set to an invalid directory:

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

我已经在我的系统JAVA_HOME中设置了C:\Program Files\Java\jdk1.8.0_ 131\bin;，并且我试图在命令提示符下运行cordova命令( cordova build )，但是我得到了下面的错误。我已尝试过各种方法，但未能解决这个问题：错误: JAVA_HOME被设置为无效目录: C:...

问JAVA_HOME设置为无效目录：
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问JAVA_HOME设置为无效目录：EN