blocks|key|3969910|text|我和Vundle遇到了同样的问题，就这样解决了这个问题：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3969911|安装cmake后，我将cd放入~..vim/bundle/YouCompleteMe并运行python+install.py|offset|length|style|CODE|3969912|entityMap^0|0|19|H|0^^$0|@$1|2|3|4|5|6|7|J|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|K|8|@$D|L|E|M|F|G]]|9|@]|A|$]]|$1|H|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|I|$]]

I ran into the same issue with Vundle and fixed it like this: 
After installing cmake, I cd'd into ~.vim/bundle/YouCompleteMe and ran 
 <code>python install.py</code>

blocks|key|1262800|text|另一个可能导致此错误的问题是conda，您应该从python的系统而不是conda系统运行install.py，这样才能使用|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1262801|/usr/bin/python+./install.py|code-block|syntax|javascript|1262802|从vim中的youcompleteme文件夹中删除|1262803|entityMap^0|19|A|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@$9|P|A|Q|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|R|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|S|8|@]|D|@]|E|$]]|$1|M|3|-4|5|6|7|T|8|@]|D|@]|E|$]]]|N|$]]

Another problem that may cause that error is conda, you should run <code>install.py</code> from the python's system and not the conda one, to do that use 

<pre><code>/usr/bin/python ./install.py
</code></pre>

from the youcompleteme folder inside vim

blocks|key|3299490|text|我也面临着同样的问题与vim，我正在使用vim插件管理器。为了克服这个问题，我做到了以下几点：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3299491|cd+~/.vim/plugged/youcompleteme
python3+install.py|code-block|syntax|javascript|3299492|完了！|3299493|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

I was also facing the same problem with vim and I am using vim-plug plugin manager. To overcome this I did this:

<pre><code>cd ~/.vim/plugged/youcompleteme
python3 install.py
</code></pre>

Done !!!

blocks|key|3969941|text|我也面临着同样的问题，但我已经通过在Ubuntu终端中执行以下命令解决了问题|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3969942|cd+~/.vim/bundle/YouCompleteMe/
sudo+pip+install+cmake
python+install.py|code-block|syntax|javascript|3969943|或|3969944|cd+~/.vim/bundle/YouCompleteMe/
sudo+pip+install+cmake
python3+install.py|3969945|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|N|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|O|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

I was also facing the same issue but I have solved by executing the following commands in the Ubuntu terminal
<pre><code>cd ~/.vim/bundle/YouCompleteMe/
sudo pip install cmake
python install.py
</code></pre>
or
<pre><code>cd ~/.vim/bundle/YouCompleteMe/
sudo pip install cmake
python3 install.py
</code></pre>

blocks|key|3299454|text|下面是我如何解决10.15.3+python+3.7+vim+8.2的问题|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3299455|使用插头“ycm+-core/YouCompleteMe”安装带有“Vim-插头”的ycm|3299456|cd+~/..vim/插入/YouCompleteMe|ordered-list-item|3299457|brew安装cmake|3299458|python+./install.py|3299459|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|N|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|O|8|@]|9|@]|A|$]]|$1|G|3|H|5|F|7|P|8|@]|9|@]|A|$]]|$1|I|3|J|5|F|7|Q|8|@]|9|@]|A|$]]|$1|K|3|-4|5|6|7|R|8|@]|9|@]|A|$]]]|L|$]]

Here is how I have solved
Mac OS Catalina 10.15.3 
python 3.7
vim 8.2

Install ycm with 'Vim-plug' using Plug 'ycm-core/YouCompleteMe'

<ol>
<li>cd ~/.vim/plugged/YouCompleteMe</li>
<li>brew install cmake</li>
<li>python ./install.py</li>
</ol>

blocks|key|1262914|text|$+cd+~/.vim/plugged/youcompleteme
$+bash+install.sh
(or)
$+python3+install.py|type|code-block|depth|inlineStyleRanges|entityRanges|data|syntax|javascript|1262915|只有当您安装了python3.7版本时，它才能工作|unstyled|1262916|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$B|C]]|$1|D|3|E|5|F|7|J|8|@]|9|@]|A|$]]|$1|G|3|-4|5|F|7|K|8|@]|9|@]|A|$]]]|H|$]]

<pre><code>$ cd ~/.vim/plugged/youcompleteme
$ bash install.sh
(or)
$ python3 install.py
</code></pre>
It will only work if you have installed the python3.7 version

blocks|key|3299381|text|下面是我最近在以下环境中所做的工作|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3299382|+Mojave+10.14.3|offset|length|style|BOLD|3299383|Vim+8.1.300|3299384|Python+3.7|3299385|Java版本1.8.0_40|3299386|$vim+--version+%7C+grep+python
%2Bcomments++++++++++%2Blibcall+++++++++++-python++++++++++++%2Bviminfo
%2Bconceal+++++++++++%2Blinebreak+++++++++%2Bpython3+++++++++++%2Bvreplace|code-block|syntax|javascript|3299387|使用ycm使用Vundle安装Plugin+'Valloric/YouCompleteMe'，然后运行:PluginInstall|CODE|3299388|下载到~/.vim/bundle/YouCompleteMe的插件|3299389|$cd++~/.vim/bundle/YouCompleteMe
$python3+installer.py+--java-completer|3299390|这将在/.vim/bundle/YouCompleteMe/third_party/ycmd/third_party/eclipse.jdt.ls下创建适当的文件(确保这些目录和内部目录不是根用户拥有的，除非您始终是根用户)。|3299391|现在打开vim并执行:YcmRestartServer|3299392|你该走了。|3299393|尝试:YcmDebugInfo来检查是否一切都很好|3299394|Printing+YouCompleteMe+debug+information...
--+Client+logfile:+/var/folders/t4/y8zpydv91sv2dszlb1_3qw_r0000gn/T/ycm_1xgp1ub9.log
--+Server+Python+interpreter:+/usr/local/bin/python
--+Server+Python+version:+3.7.0
--+Server+has+Clang+support+compiled+in:+False
--+Clang+version:+None
--+Extra+configuration+file+found+but+not+loaded
--+Extra+configuration+path:+~/.vim/bundle/YouCompleteMe/third_party/ycmd/.ycm_extra_conf.py
--+Server+running+at:+http://127.0.0.1:58050
--+Server+process+ID:+2334
--+Server+logfiles:
--+++/var/folders/t4/y8zpydv91sv2dszlb1_3qw_r0000gn/T/ycmd_58050_stdout_wzk9oksu.log
--+++/var/folders/t4/y8zpydv91sv2dszlb1_3qw_r0000gn/T/ycmd_58050_stderr_xjb7zjn2.log|3299395|CentOS+Linux版本7.6.1810+(核心)|3299396|Vim+8.1.1362|3299397|Python+3.7.3|3299398|Java版本"1.8.0_191“|3299399|总体过程保持不变，但在Centos上我遇到了几个困难。|3299400|没有使用Python支持编译Vim。|unordered-list-item|3299401|sudo+vi+/etc/ld.so.conf|3299402|将/usr/local/lib添加到具有libpython3.7m.so.1.0文件的|3299403|sudo+ldconfig
git+clone+https://github.com/vim/vim.git
cd+vim
./configure+--prefix=/usr/local/+--enable-python3interp=yes+--with-python3-command=/usr/local/bin/python+--with-python3-config-dir=|3299404|程序的其余部分保持不变。|3299405|entityMap^0|0|0|F|0|0|0|0|0|2|3|7|6|F|V|1F|E|0|3|R|0|0|3|1Y|2L|8|0|A|H|0|0|2|D|0|0|0|R|0|0|0|0|0|0|0|1|E|K|K|0|0|0^^$0|@$1|2|3|4|5|6|7|1W|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|1X|8|@$D|1Y|E|1Z|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|20|8|@]|9|@]|A|$]]|$1|J|3|K|5|6|7|21|8|@]|9|@]|A|$]]|$1|L|3|M|5|6|7|22|8|@]|9|@]|A|$]]|$1|N|3|O|5|P|7|23|8|@]|9|@]|A|$Q|R]]|$1|S|3|T|5|6|7|24|8|@$D|25|E|26|F|U]|$D|27|E|28|F|U]|$D|29|E|2A|F|U]|$D|2B|E|2C|F|U]]|9|@]|A|$]]|$1|V|3|W|5|6|7|2D|8|@$D|2E|E|2F|F|U]]|9|@]|A|$]]|$1|X|3|Y|5|P|7|2G|8|@]|9|@]|A|$Q|R]]|$1|Z|3|10|5|6|7|2H|8|@$D|2I|E|2J|F|U]|$D|2K|E|2L|F|G]]|9|@]|A|$]]|$1|11|3|12|5|6|7|2M|8|@$D|2N|E|2O|F|U]]|9|@]|A|$]]|$1|13|3|14|5|6|7|2P|8|@]|9|@]|A|$]]|$1|15|3|16|5|6|7|2Q|8|@$D|2R|E|2S|F|U]]|9|@]|A|$]]|$1|17|3|18|5|P|7|2T|8|@]|9|@]|A|$Q|R]]|$1|19|3|1A|5|6|7|2U|8|@$D|2V|E|2W|F|G]]|9|@]|A|$]]|$1|1B|3|1C|5|6|7|2X|8|@]|9|@]|A|$]]|$1|1D|3|1E|5|6|7|2Y|8|@]|9|@]|A|$]]|$1|1F|3|1G|5|6|7|2Z|8|@]|9|@]|A|$]]|$1|1H|3|1I|5|6|7|30|8|@]|9|@]|A|$]]|$1|1J|3|1K|5|1L|7|31|8|@]|9|@]|A|$]]|$1|1M|3|1N|5|P|7|32|8|@]|9|@]|A|$Q|R]]|$1|1O|3|1P|5|6|7|33|8|@$D|34|E|35|F|U]|$D|36|E|37|F|U]]|9|@]|A|$]]|$1|1Q|3|1R|5|P|7|38|8|@]|9|@]|A|$Q|R]]|$1|1S|3|1T|5|6|7|39|8|@]|9|@]|A|$]]|$1|1U|3|-4|5|6|7|3A|8|@]|9|@]|A|$]]]|1V|$]]

Here is how I did this recently with following environments

Mac OS Mojave 10.14.3

Vim 8.1.300

Python 3.7

Java version 1.8.0_40

<pre><code>$vim --version | grep python
+comments +libcall -python +viminfo
+conceal +linebreak +python3 +vreplace
</code></pre>

Installed <code>ycm</code> with <code>Vundle</code> using <code>Plugin 'Valloric/YouCompleteMe'</code> and then running <code>:PluginInstall</code>

The plugins in downloaded to <code>~/.vim/bundle/YouCompleteMe</code>

<pre><code>$cd ~/.vim/bundle/YouCompleteMe
$python3 installer.py --java-completer
</code></pre>

This creates appropriate files under <code>/.vim/bundle/YouCompleteMe/third_party/ycmd/third_party/eclipse.jdt.ls</code> (make sure these and inner directories are not owned by root unless you always work as a root)

now open vim and execute <code>:YcmRestartServer</code> 

You should be good to go.

Try <code>:YcmDebugInfo</code> to check if everything is fine

<pre><code>Printing YouCompleteMe debug information...
-- Client logfile: /var/folders/t4/y8zpydv91sv2dszlb1_3qw_r0000gn/T/ycm_1xgp1ub9.log
-- Server Python interpreter: /usr/local/bin/python
-- Server Python version: 3.7.0
-- Server has Clang support compiled in: False
-- Clang version: None
-- Extra configuration file found but not loaded
-- Extra configuration path: ~/.vim/bundle/YouCompleteMe/third_party/ycmd/.ycm_extra_conf.py
-- Server running at: http://127.0.0.1:58050
-- Server process ID: 2334
-- Server logfiles:
-- /var/folders/t4/y8zpydv91sv2dszlb1_3qw_r0000gn/T/ycmd_58050_stdout_wzk9oksu.log
-- /var/folders/t4/y8zpydv91sv2dszlb1_3qw_r0000gn/T/ycmd_58050_stderr_xjb7zjn2.log
</code></pre>

CentOS Linux release 7.6.1810 (Core)

Vim 8.1.1362

Python 3.7.3

Java openjdk version "1.8.0_191"

Overall process remains same, but I had couple of difficulties on Centos

<ul>
<li>Vim was not compiled with Python support</li>
</ul>

<pre><code>sudo vi /etc/ld.so.conf
</code></pre>

added <code>/usr/local/lib</code> to it which had <code>libpython3.7m.so.1.0</code> file

<pre><code>sudo ldconfig
git clone https://github.com/vim/vim.git
cd vim
./configure --prefix=/usr/local/ --enable-python3interp=yes --with-python3-command=/usr/local/bin/python --with-python3-config-dir=
</code></pre>

Rest of the procedure remains the same.

I installed YCM with vim plug, but I may have shut down before process finished. Now when I start vim I get this error "The ycmd server SHUT DOWN (restart wit...the instructions in the documentation."

I've googled but can not find workable solution. I don't see anything in the documentation that helps. But I am new to vim and coding in general so may be missing something.

:YcmDebugInfo comes back with "Server errored, no debug info from server".

I have tried :YcmRestartServer, but to no result -- it pauses then returns the same error. I have also run :PlugInstall and :PlugUpdate, and all plug ins, including YCM, are coming back as up to date.

YCM error. The ycmd server SHUT DOWN (restart wit...the instructions in the documentation

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋 

腾讯云代码助手

CODING DevOps

Cloud Studio

SDK中心

API中心

命令行工具

我安装了YCM与vim插头，但我可能已经关闭之前，进程完成。现在，当我启动vim时，我得到了“ycmd服务器关闭(在文档中重新启动wit...the指令)”这个错误。我已经搜索过，但找不到可行的解决方案。我在文档中没有看到任何有帮助的东西。但是我对vim和编码还不熟悉，所以可能会遗漏一些东西。YcmDebugInfo返回“服务器错误，没有来自服务器的调试信息”。我尝试过:YcmRestartSer

问YCM误差关闭ycmd服务器(在文档中重新启动wit...the指令)
EN

回答 7

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问YCM误差关闭ycmd服务器(在文档中重新启动wit...the指令)EN

回答 7

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问YCM误差关闭ycmd服务器(在文档中重新启动wit...the指令)
EN