blocks|key|490580|text|由于版本不匹配，可能会出现此问题。要解决问题，您需要在package.json文件中执行以下更改。|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|490581|步骤1：转到package.json并将"rxjs":+"%5E6.0.0"修改为"rxjs":+"6.0.0"|CODE|490582|步骤2在项目中运行npm+install。|490583|没有必要更改打字本。(我的："typescript":+"~2.7.2")|490584|编辑：，如果您正在使用rxjs-compat，那么您也需要按照下面的步骤来解决这个问题。将rxjs-compat版本从"rxjs-compat":+"%5E6.2.2"更改为"rxjs-compat":+"6.2.2"|490585|希望这能帮上忙！|490586|entityMap^0|R|C|0|0|3|6|C|K|G|13|F|0|0|3|9|B|0|E|M|0|0|3|B|B|19|B|1N|N|2D|M|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@$9|T|A|U|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|V|8|@$9|W|A|X|B|C]|$9|Y|A|Z|B|H]|$9|10|A|11|B|H]|$9|12|A|13|B|H]]|D|@]|E|$]]|$1|I|3|J|5|6|7|14|8|@$9|15|A|16|B|C]|$9|17|A|18|B|H]]|D|@]|E|$]]|$1|K|3|L|5|6|7|19|8|@$9|1A|A|1B|B|H]]|D|@]|E|$]]|$1|M|3|N|5|6|7|1C|8|@$9|1D|A|1E|B|C]|$9|1F|A|1G|B|H]|$9|1H|A|1I|B|H]|$9|1J|A|1K|B|H]|$9|1L|A|1M|B|H]]|D|@]|E|$]]|$1|O|3|P|5|6|7|1N|8|@]|D|@]|E|$]]|$1|Q|3|-4|5|6|7|1O|8|@]|D|@]|E|$]]]|R|$]]

This problem might arise due to version mismatch. To solve your problem you need to do following changes in your package.json file.

Step 1 : Go to <code>package.json</code> and modify <code>"rxjs": "^6.0.0"</code> to <code>"rxjs": "6.0.0"</code>

Step 2 Run <code>npm install</code> in your project.

There is no need to change the typescript version. (Mine: <code>"typescript": "~2.7.2"</code>)

Edit: If you are using <code>rxjs-compat</code> then you also need to do following in order to fixed the issue. change the <code>rxjs-compat</code> version from <code>"rxjs-compat": "^6.2.2"</code> to <code>"rxjs-compat": "6.2.2"</code>

Hope this will help!

blocks|key|3212473|text|转到package.json并更新"rxjs"："%5E6.0.0“到"rxjs"："6.0.0”之后进行npm更新|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3212474|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Go to package.json and update "rxjs": "^6.0.0" to "rxjs": "6.0.0"
after that do npm update

blocks|key|1680107|text|使用具有rxjs@6.4.0的角6也有相同的错误，但我将其降级为rxjs@6.3.3，它有效。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1680108|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I had the same error
using angular 6 having rxjs@6.4.0 but i downgraded it to rxjs@6.3.3
it worked.

blocks|key|1680124|text|我只需要编辑文件并在0后面的最后一行添加分号，如下所示：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1680125|转到路径[project+directory]/node_modules/rxjs/internal并以管理员身份打开文件types.d.ts，移到文件的最后一个位置，并添加一个分号。|offset|length|style|CODE|1680126|原始代码：+export+declare+type+ObservedValueOf<O>+=+O+extends+ObservableInput<infer+T>+?+T+:+never;|BOLD|1680127|修改代码：+export+declare+type+ObservedValueOf<O>+=+O;+extends+ObservableInput<infer+T>+?+T+:+never;|1680128|entityMap^0|0|4|1A|1P|A|0|0|5|6|2G|0|0|5|6|2H|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|P|8|@$D|Q|E|R|F|G]|$D|S|E|T|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|U|8|@$D|V|E|W|F|J]|$D|X|E|Y|F|G]]|9|@]|A|$]]|$1|K|3|L|5|6|7|Z|8|@$D|10|E|11|F|J]|$D|12|E|13|F|G]]|9|@]|A|$]]|$1|M|3|-4|5|6|7|14|8|@]|9|@]|A|$]]]|N|$]]

I just needed to edit the file and add the semicolon at the final line after 0 as shown here:

Go to the path <code>[project directory]/node_modules/rxjs/internal</code> and open the file <code>types.d.ts</code> as administrator, move to the final of the file and add a semicolon.

Original code: <code>export declare type ObservedValueOf&lt;O&gt; = O extends ObservableInput&lt;infer T&gt; ? T : never;</code>

Modified code: <code>export declare type ObservedValueOf&lt;O&gt; = O; extends ObservableInput&lt;infer T&gt; ? T : never;</code>

blocks|key|1680196|text|如果您正在使用rxjs，那么您还需要执行以下操作来解决这个问题。将rxjs-compat版本更改为|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1680197|"rxjs-compat":+"%5E6.2.2"+|code-block|syntax|javascript|1680198|至|1680199|"rxjs-compat":+"6.2.2"|1680200|这个对我有用|1680201|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Q|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|R|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|S|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

If you are using rxjs-compat then you also need to do following in order to fixed the issue. change the rxjs-compat version from 

<pre><code>"rxjs-compat": "^6.2.2" 
</code></pre>

to 

<pre><code>"rxjs-compat": "6.2.2"
</code></pre>

This works for me

blocks|key|3212578|text|如果您仍然面临这个问题，请转到package.json|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3212579|删除rxjs并添加rxjs-compat，“”："%5E6.4.0“添加到”“："6.4.0"，|ordered-list-item|3212580|将类型脚本版本更改为2.8|3212581|运行npm安装|3212582|这会对你有用的！|3212583|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|N|8|@]|9|@]|A|$]]|$1|E|3|F|5|D|7|O|8|@]|9|@]|A|$]]|$1|G|3|H|5|D|7|P|8|@]|9|@]|A|$]]|$1|I|3|J|5|6|7|Q|8|@]|9|@]|A|$]]|$1|K|3|-4|5|6|7|R|8|@]|9|@]|A|$]]]|L|$]]

if you are still facing the problem,
go to package.json

<ol>
<li>remove rxjs and add rxjs-compat
also,
"rxjs-compat": "^6.4.0"
 to
"rxjs-compat": "6.4.0",</li>
<li>change the typscript version to 2.8</li>
<li>run npm install</li>
</ol>

This will work for you!

blocks|key|3212589|text|我也有同样的问题，"rxjs"："%5E6.0.0“到"rxjs"："6.0.0”没有工作。我必须更新我的角度CLI以保持稳定的npm+install+-g+@angular/cli并重新生成该项目。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|3212590|我现在的配置是：|3212591|Angular+CLI:+7.3.6
Node:+10.15.3
OS:+win32+x64
Angular:+7.2.9|code-block|syntax|javascript|3212592|entityMap^0|1Q|R|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@$9|P|A|Q|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|R|8|@]|D|@]|E|$]]|$1|H|3|I|5|J|7|S|8|@]|D|@]|E|$K|L]]|$1|M|3|-4|5|6|7|T|8|@]|D|@]|E|$]]]|N|$]]

I had the same issue, the "rxjs": "^6.0.0" to "rxjs": "6.0.0" didn't work. I had to update my angular CLI to last stable <code>npm install -g @angular/cli</code> and regenerate the project again.

My config now is :

<pre><code>Angular CLI: 7.3.6
Node: 10.15.3
OS: win32 x64
Angular: 7.2.9
</code></pre>

blocks|key|3212652|text|早些时候，我经常用@TheParam的答案来解决这个问题，但最近我开始使用纱线。遗憾的是，我找不到相当于|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3212653|nmp+update|code-block|syntax|javascript|3212654|我试着用|3212655|yarn+upgrade|3212656|(虽然它不等同于上述命令afaik)，也没有帮助。|3212657|我用的是|3212658|yarn+add+rxjs@6.0.0|3212659|而且起作用了。这是相当长的时间，82秒，相比之下，只有几秒钟的情况下，国家预防机制，但解决了问题。我的节点8.11.2和纱线1.15.2|3212660|entityMap^0|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|V|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|W|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|X|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|Y|8|@]|9|@]|A|$]]|$1|M|3|N|5|6|7|Z|8|@]|9|@]|A|$]]|$1|O|3|P|5|D|7|10|8|@]|9|@]|A|$E|F]]|$1|Q|3|R|5|6|7|11|8|@]|9|@]|A|$]]|$1|S|3|-4|5|6|7|12|8|@]|9|@]|A|$]]]|T|$]]

Earlier, I used to fix the problem with @TheParam's answer but lately started using yarn. Sadly I could not find yarn equivalent of

<pre><code>nmp update
</code></pre>

I tried using 

<pre><code>yarn upgrade
</code></pre>

(although it is not equivalent of above command afaik) and it did not help.

I instead used 

<pre><code>yarn add rxjs@6.0.0
</code></pre>

and it worked. It took considerable time 82 sec as compared to few seconds in case of npm but fixed the issue. my node 8.11.2 and yarn 1.15.2

blocks|key|490757|text|您需要在package.json中做一些更改|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|490758|转到package.json并将"rxjs":+"%5E6.0.0"修改为"rxjs":+"6.0.0"|490759|然后在项目中运行npm+update|490760|entityMap^0|4|C|0|2|C|G|G|Z|F|0|8|A|0^^$0|@$1|2|3|4|5|6|7|L|8|@$9|M|A|N|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|O|8|@$9|P|A|Q|B|C]|$9|R|A|S|B|C]|$9|T|A|U|B|C]]|D|@]|E|$]]|$1|H|3|I|5|6|7|V|8|@$9|W|A|X|B|C]]|D|@]|E|$]]|$1|J|3|-4|5|6|7|Y|8|@]|D|@]|E|$]]]|K|$]]

You need to do some changes in <code>package.json</code>

Go to <code>package.json</code> and modify <code>"rxjs": "^6.0.0"</code> to <code>"rxjs": "6.0.0"</code>

Then run <code>npm update</code> in your project

blocks|key|3212730|text|转到项目目录，运行以下命令|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3212731|npm安装rxjs@6.0.0+--保存|3212732|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

Go to the project directory run this command 

npm install rxjs@6.0.0 --save

blocks|key|490788|text|我也有同样的问题|type|unstyled|depth|inlineStyleRanges|entityRanges|data|490789|npm+install+typescript@2.8.0+|code-block|syntax|javascript|490790|解决了我的问题|490791|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

I had same problem

<pre><code>npm install typescript@2.8.0 
</code></pre>

solved my problem

blocks|key|490834|text|此问题是由于安装的类型记录版本与rxjs的类型记录版本不兼容引起的，如下面所述，帮助我安装了兼容版本的类型记录与installed.You已经通过以下命令解决问题的角包版本。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|490835|npm+install+typescript+|code-block|syntax|javascript|490836|这对我来说很管用|490837|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

This issue is caused by version of typescript installed was not compatible with that of the rxjs installed.Installation of typescript as mentioned below helped me install the compatible version of typescript with that of the angular packages already installed.You can resolve the issue by the below command

<pre><code>npm install typescript 
</code></pre>

This worked for me

blocks|key|490847|text|当我将package.json中的"rxjs“从"%5E6.0.0”更改为"6.0.0“，然后运行时，它对我很好。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|490848|“国家预防机制i”|blockquote|490849|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|G|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|H|8|@]|9|@]|A|$]]|$1|E|3|-4|5|6|7|I|8|@]|9|@]|A|$]]]|F|$]]

It is working fine with me when I changed "rxjs" in package.json from "^6.0.0" to "6.0.0"
and then run 

<blockquote>
 "npm i"
</blockquote>

blocks|key|490879|text|我得到相同的error.reason可能是因为版本错配|type|unstyled|depth|inlineStyleRanges|entityRanges|data|490880|npm+install+rxjs@6.0.0+--save修复错误|offset|length|style|CODE|490881|entityMap^0|0|0|T|0^^$0|@$1|2|3|4|5|6|7|J|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|K|8|@$D|L|E|M|F|G]]|9|@]|A|$]]|$1|H|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|I|$]]

I got the same error.reason might be due to version mismatch

<code>npm install rxjs@6.0.0 --save</code> fix the error

blocks|key|490883|text|这是我的解决办法：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|490884|npm+install+rxjs@6.0.0+--save

ng+server|code-block|syntax|javascript|490885|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

This is my solution:
<pre><code>npm install rxjs@6.0.0 --save

ng server
</code></pre>

I got an error of 

<blockquote>
 node_modules/rxjs/internal/types.d.ts(81,44): error TS1005: ';' expected.
</blockquote>

after the installation of Angular 6. 

Check the error:

<pre class="lang-none prettyprint-override"><code>ERROR in node_modules/rxjs/internal/types.d.ts(81,44): error TS1005: ';' expected.
node_modules/rxjs/internal/types.d.ts(81,74): error TS1005: ';' expected.
node_modules/rxjs/internal/types.d.ts(81,77): error TS1109: Expression expected.
</code></pre>

node_modules/rxjs/internal/types.d.ts(81,44): error TS1005: ';' expected error after installation of Angular 6

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

我有个错误node_node/rxjs/TS1005/ypes.d.ts(81，44)：错误TS1005：';‘预期的。安装后的角度6。检查错误：ERROR in node_modules/rxjs/internal/types.d.ts(81,44): error TS1005: ';' expected.node_...

问节点_模块/rxjs/内部/node es.d.ts(81，44)：安装角6后的错误TS1005：';‘
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问节点_模块/rxjs/内部/node es.d.ts(81，44)：安装角6后的错误TS1005：';‘EN