我的新116 My外部SSD在Windows中工作，但不适用于Ubuntu
我的新116 My外部SSD在Windows中工作，但不适用于Ubuntu
提问于 2022-08-17 14:58:33
我有一个新的便宜，中国人外部SSD，16 SSD。这是一个具有正确容量的exFAT驱动器，并在我的工作Windows上获取数据，但在Ubuntu中会产生一系列错误&不被识别。
- 这里的工作有上限吗？
- 有人知道修理方法吗？
litany (dmesg)显示出它认识到它是一个非常大的容量驱动器，尝试了一些事情，其中几个尝试了两次，然后放弃了。当我插入桌面时，它完全没有反应。
我不认为它有帮助，但它是一个“可移植的SSD”&在这种情况下写着"MOBLLE SDUD状态“--我想，这是某种警告。我不想做任何聪明的事情，像从它引导，只是使用它作为文件。因此，详情如下：
[ 14.239812] mce: CPU5: Package temperature/speed normal
[ 14.239812] mce: CPU4: Package temperature/speed normal
[ 35.592132] usb 3-3: new high-speed USB device number 5 using xhci_hcd
[ 35.741026] usb 3-3: New USB device found, idVendor=048d, idProduct=1234, bcdDevice= 1.00
[ 35.741029] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 35.741030] usb 3-3: Product: Product
[ 35.741031] usb 3-3: Manufacturer: Vendor
[ 35.741033] usb 3-3: SerialNumber: A1
[ 35.762623] usb-storage 3-3:1.0: USB Mass Storage device detected
[ 35.762821] scsi host0: usb-storage 3-3:1.0
[ 35.762968] usbcore: registered new interface driver usb-storage
[ 35.765626] usbcore: registered new interface driver uas
[ 36.772793] scsi 0:0:0:0: Direct-Access SDK ssd 5.00 PQ: 0 ANSI: 2
[ 36.773257] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 36.773663] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 36.773833] sd 0:0:0:0: [sda] 4096000000 4096-byte logical blocks: (16.8 TB/15.3 TiB)
[ 36.773943] sd 0:0:0:0: [sda] Write Protect is off
[ 36.773945] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08
[ 36.774071] sd 0:0:0:0: [sda] No Caching mode page found
[ 36.774076] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 36.800741] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 36.804325] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 36.804328] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current]
[ 36.804331] sd 0:0:0:0: [sda] tag#0 Add. Sense: Logical block address out of range
[ 36.804333] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 f4 23 ff ff 00 00 01 00
[ 36.804337] blk_update_request: critical target error, dev sda, sector 32767999992 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 36.804342] Buffer I/O error on dev sda, logical block 4095999999, async page read
[ 36.804349] Alternate GPT is invalid, using primary GPT.
[ 36.804359] sda: sda1 sda2
[ 36.833251] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 36.833616] sd 0:0:0:0: [sda] Attached SCSI disk
[ 36.834546] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 36.834549] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current]
[ 36.834551] sd 0:0:0:0: [sda] tag#0 Add. Sense: Logical block address out of range
[ 36.834554] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 f4 23 ff f0 00 00 01 00
[ 36.834557] blk_update_request: critical target error, dev sda, sector 32767999872 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 36.835039] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 36.835041] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current]
[ 36.835043] sd 0:0:0:0: [sda] tag#0 Add. Sense: Logical block address out of range
[ 36.835044] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 f4 23 ff f0 00 00 01 00
[ 36.835046] blk_update_request: critical target error, dev sda, sector 32767999872 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 36.835049] Buffer I/O error on dev sda, logical block 4095999984, async page read
[ 36.934613] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 36.934617] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current]
[ 36.934620] sd 0:0:0:0: [sda] tag#0 Add. Sense: Logical block address out of range
[ 36.934622] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 f4 23 ff e0 00 00 01 00
[ 36.934626] blk_update_request: critical target error, dev sda, sector 32767999744 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 36.936631] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 36.936634] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current]
[ 36.936636] sd 0:0:0:0: [sda] tag#0 Add. Sense: Logical block address out of range
[ 36.936638] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 f4 23 ff e0 00 00 01 00
[ 36.936641] blk_update_request: critical target error, dev sda, sector 32767999744 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 36.936645] Buffer I/O error on dev sda2, logical block 4095995872, async page read总线003设备005: ID048d:1234集成技术速递公司
回答 1
Ask Ubuntu用户
回答已采纳
发布于 2022-08-20 16:50:45
好的，我们有很多关于垃圾上浪费的on 20的评论。
固件是错误的，它会随机覆盖数据，我不能仅仅设置一个更小的分区(我曾经尝试过--现在Windows也不认识它)，因为它可能会偏离外部以平衡磨损&我想它将使用假想内存WOM -只写内存。
但这是一个有趣的探索。希望这将节省其他人的£20。离开离开留下反馈。谢谢你的想法。
页面原文内容由Ask Ubuntu提供。腾讯云小微IT领域专用引擎提供翻译支持
原文链接：
https://askubuntu.com/questions/1424120
复制相关文章
相似问题
腾讯云开发者
